Satellite L650-11F - how to connect to LCD via an HDMI cable?

Hello world

I have the Satellite L650-11F with ATI 5650 and HDMI port and I want to connect the laptop via HDMI lcd screen so that I have some office using 2 * ATI Catalyst * and * software HydraVision, but ATI sites said that Toshiba notebook is not supported (Please check with your mobile phone OEM for support of the drivers for these laptops).

So, how can I connect my laptop to LCD screen to get 2 workstation?

Sorry for my bad English :)

Hi thebluewriter,

I think you need to check only the other discussions of the forum on the connection for laptop LCD screen. You will find enough about it!

In any case, most recent display driver you can download on the official website of Toshiba, but usually it s preinstalled on your laptop.
If you are using a HDMI cable, use just FN + F5 key combination to switch between monitors. All that s! :)

Tags: Toshiba

Similar Questions

  • Satellite A205: Dynadock - how to connect to LCD TV with HDMI Cable DVI

    I recently bought this product and had a problem when connecting it to my LCD TV.
    I used an HDMI cable to DVI to connect to the TV. Only a small part of the display shows on the TV.

    I did all the settings on the laptop (Satellite A205) but it adjusts only the laptop screen, not TV.
    I also used VGA adapter, connected to the entrance of the computer to the TV, same effect. Can I use VGA output on the side of the laptop to TV ok.

    Any ideas on how to adjust output dynadock parameters?

    First of all, it would be interesting to know what dynadock you exactly; a DVI or a VGA port?

    > I did all the settings on the laptop (Satellite A205) but it adjusts only the laptop screen, not TV.

    You should know that the dynadock has an own integrated graphics controller and video drivers to control the video stream.
    Therefore, you should change the settings directly in the settings dynadock and not on the laptop!

    Greetigns

  • Satellite L650-11F - how to access HARD drive recovery?

    Hello!

    I have a Toshiba Satellite L650-11F.

    The other day I had a huge massive Goner virus (lol) and the computer is turned off. Whenever I tried to turn it on, it started to load Windows, and then restart. I tried to start Windows in safe mode but the same thing happened, just keep restarting. I tried to repair Windows (by pressing f8 and etc.) and without success, he kept restarting.

    So I tried to put it because it came from fabric and when I press 0 or F1 happears just 2 options: choose an opperating system to start or press tab to select a tool: Windows 7 tools: Windows memory diagnostic

    Can you help me please? Is there another way I can access the hidden hard drive recovery partition? Please :(

    Hi dakova,.

    Ist it Toshiba's original OS is still installed? I ask this question because it of necessary for the recovery of HARD drive. If you have installed another OS, you can access t HARD drive recovery option.
    In addition, recovery of HARD drive option is available if you press the F8 key before Windows starts. In the advanced boot menu, select fix my computer. The exact procedure is described here:
    http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm

    Alternative, you can take the Toshiba recovery disc. This will also restore the original settings. :)

  • Z580 help: connect to the TV via a HDMI cable

    I recently had my father the IdeaPad Z580. It is really eager to stream its videos and watch them on TV. I connected it today via a HDMI cable and got really excited when the screen was reproduced on the TV... but then, when I clicked on internet Explorer tile, I got the following error message:

    This application cannot open
    The screen resolution is too low for this application to run.
    Change your screen resolution

    Seems simple enough... but really did not have a clue what to do! Doesn't help that I'm a complete newbie to Windows 8!

    I'd be really grateful if someone here would be able to help / tell me what to do! ^^

    Thanks in advance!

    All of a sudden it works without enaything. In fact, I just do a windows 8.1 update.

  • Drivers of recovery satellite L650-11F

    Yesterday I bought the laptop Toshiba Satellite L650-11F, I want to create or make a recovery for the drivers but I don't know how it is, can you help me please?
    I have already created a recovery on Toshiba Recovery Media Creator (2DVD disc) but I don't know if it includes drivers of recovery, it's on Windows 7,
    Help me please
    Thank you

    Post edited by: bacquet

    Toshiba disc creator recovery using you create the recovery disk/disks that contains the recovery image. It's a kind of footprint of the preinstalled operating system.
    With other words: this recovery image contains the operating system, all necessary drivers, specific Toshiba tools/utilities and some additional software.

    When you use it for the installation of the OS you'll have once again out of the box state.

  • Satellite L650-11F - cannot install driver page of the ATI graphics card

    I just bought a Satellite L650-11f and tried to update the drivers for my Ati hd5650.
    The problem is the control of catalyst can I install without problem but when I try to install the site display drivers driver ati I get this error:
    ATI catalyst mobility can t be downloaded due to the incompatibility of hardware/software on your computer. The version of your driver card is not supported. for an update of the graphics driver, contact the manufacturer of your laptop.

    How should I update with the latest display drivers cause the manufacturer are 6 months old?

    Hello

    You have a few problems with the Toshiba display driver?
    Graphics drivers from Toshiba are modified for mobile use, this means that the Toshiba drivers support for GPU overheating protection.
    ATI drivers don t support this protection and this is the reason why you get this message.
    Generally, you have to take the driver of Toshiba page

    Of course, it is possible to install the ATI drivers also.
    But you would need to install the driver in Device Manager.
    To use the Advanced installation procedure that would allow to choose the driver downloaded from the ATI page you simply forcing windows to choose such driver

    But note; You can use these drivers ONLY at your own risk

  • Satellite L650-11F is not supported on the service page

    I can't find anything on the Satellite L650-11F in the pages of the service. ? f you have any idea please help me.
    I bought this laptop but I can not find any Abu knowledge in the web pages of Toshiba.

    I put t know what are you looking for exactly, but if you need drivers for supported operating systems you can find on Toshiba download page under http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

    Choose here
    Laptop
    Satellite
    Satellite L series
    Satellite L650
    PSK1JE (this number you can find on the lower side on Toshiba sticker)
    Choose the operating system and RESEARCH

    If you have any other questions let us know.

  • Laptop does not start with LCD connected via an HDMI cable

    I have a laptop Toshiba A660 running windows 7 Home Premium. I use and external LCD connected via an HDMI cable. If I leave the cable connected to the computer when I turn it on most of the time it does not start. It hangs at the windows from logo. The only way I can boot is power off (by operating switch for a while) and remove the HDMI cable.

    Hello

    To update the display driver, following the steps outlined in the article below:

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    Update drivers: recommended links

    http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

    See the articles on how to set up two monitors:

    http://support.Microsoft.com/kb/976064

    http://www.Microsoft.com/athome/organization/twomonitors.aspx#fBid=f5W9Hvf07IV

    I hope it helps

  • Satellite L650 - 10: PSK1JE - no external signal on TV with HDMI

    I connected my PSK1JE Toshiba L650 - 10 H with TV KDL-26BX320 using an HDMI cable. Win + P dial-up (Fn + F5) to enlarge the screen. TV has no signal (black screen) but the computer recognizes TV. All the drivers are up to date.

    Screenshot of settings:
    [https://dl.dropboxusercontent.com/u/29198343/Screenshot%202014-09-02%2015.53.56.png]

    Hello

    Have you chosen the right HDMI channel in the settings of the TV?
    From my point of few TV supports multiple HDMI ports. Ensure that the correct HDMI port was selected.

    In addition, you should check if the resolution chosen for the 2nd screen (TV) is supported by the TV. In most cases, the resolution should be 720 p (1280 × 720) or 1080 p (1920 × 1080)
    I see in your screenshot that the chosen resolution is 1360 x 768

  • Unable to connect Sony KDL60EX500 Widescreen 60 "LCD for laptop Asus UL50V via an HDMI cable.

    Original title: Sony KDL60EX500 Widescreen LCD Plug and Play 60 "questions

    The first time I have connected my laptop Asus UL50V to my via a HDMI Cable TV it immediately conne.cted.  I do not use it for several months then tried to connect to them, that I have a very difficult time. I tried to stop the laptop and the TV power off and waiting to initialize never the combination of turn HDMI cable with no luck. I have don't same st screen at the Sony manufacturer's instructions, no luck.

    My laptop has a processor hybrid two VGA and Intel 4 chip family series

    Help, please.

    Hello

    1. what happens when you try to connect to TV laptop Asus UL50V?

    2. what operating system is installed on the computer?

    Reference:

    Connect your computer to a TV:

    http://Windows.Microsoft.com/en-us/Windows7/connect-your-computer-to-a-TV

  • How to connect a MAC via RDP machine

    How to connect a MAC via RDP machine from a Windows machine.

    Hello

    I found the solution, you can use VNC viewer to access MAC machine to Windows.

    Steps to activate allow the connection to the MAC

    Go to the system preferences - click Sharing - select Remote management, click Computer Configuration

    Check these two options

    -Any person may request permission to control system

    -VNC viewers may control screen with password (enter password)

    Now the system of windows one can connect using MAC machine IP and the password

    Kind regards

    Durga

  • trying to connect my ps3 to my laptop via a hdmi cable

    Im trying to connect my ps3 to my laptop via an hdmi cable, but nothing happens

    What can I do?

    Hi mezilla,

    Please see the post below with a similar problem and fix possible:

    http://boardsus.PlayStation.com/T5/PlayStation-3-General/how-to-connect-PS3-to-Windows-Media-Center/m-p/38640141

    I hope this helps!

    Debra
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Re: Want to HP dv7 - no sound on the TV when it is connected via a HDMI cable

    Hello.

    I would also like to ask for help because I'm faced with the same question.

    what I'm trying to get a sound with HDMI, it will not work...

    Delfim João

    Hi @Delfim ,

    Thank you to visit the Support Forums HP and welcome and thank you for all the information about what you tried. I looked in your question about your computer laptop dv7 HP ENVY and the problems of sound with an HDMI cable connected.

    Try this fix.

    1. a click right icon "speaker" (right)
    2. Select playback device
    3. click right speakers
    4 activate and as default
    5. click apply/OK

    This is a general document on the resolution of the problems with the HDMI connection.

    With the HDMI cable you have restarted the laptop?

    Have you tried another cable?

    Hope it will be useful.

    Thank you.

  • connection of two monitor using hdmi cables

    hp Hello Forum

    I want to connect two monitors using two hdmi cables, hdmi to dvi cable and an external graphics card.  The problem is, I don't know where to start? (what to connect to what?) I can do if I have easy to follow instructions or illustrations would be gr8, thanks in advance :-)

    Sorry... I just noticed that we have discussed your configuration before. May I ask if the previously suggested configuration did not work? What prompted the purchase of the USB graphic card?

    Display USB adapters are designed mainly for the non-graphiquement intense... Adding screens for things like spreadsheets, documents word, daytrading, presentations, etc. The display adapter using USB can cause a lower performance than using the native chart AMD Radeon HD 7570 card. I suggest that you avoid using the USB graphic card, if possible. Depending on your selection of available cables, if suggests using one of the following configurations;

    (1) computer > HDMI cable > monitor and the computer > cable DVI > monitor (recommended)

    or

    (2) computer > HDMI cable > monitor and the computer > DVI-HDMI cable > monitor

  • Satellite L650 Wireless disconnects and connection cannot be retrieved

    Hello everyone,

    I have a connectivity problem with my 3 year old Satellite L650, Windows 7...

    I have a LAN wireless in my house, so that my laptop will automatically connect at startup, without any problem.
    After some time (it can be minutes or hours) it loses signal and disconnects.

    This isn't a real problem, because the router is quite far from here, with walls between which can reduce the signal, so no surprises.
    But I can't reconnect later: connection status icon stops working.

    I mean it shows the image corresponding to "available wifi connections" or "connected but no internet access, but or by clicking on the icon or move the cursor of the mouse on it gives no output... it is responseless, and I can't connect to my wifi or any other wireless network.

    I tried to do it from the control panel - network and sharing Center, but the story is the same, the two "set up a new connection or network" and "connect to a network" is not responding when you click on it.
    The only way to connect is to restart the pc.

    How can I solve this?

    Any suggestion is appreciated,
    Thank you!

    > The only way to connect is to restart the pc.
    In case this question is repeated once again, try to refresh and renew the IP address.

    Go to the console (in the type of search CMD)
    Now use the command: ipconfig / renew

    After this attempt to connect to the Wlan again.

    In which case it would not be useful, I recommend you to change the settings of the router.
    I mean that you need to reset the router. Then, you need to test with different types of protection Wlan Wlan connectivity and other standard Wlan (802 11 B G or N)

    Test also the laptop with open WiFi. I mean, you must disable the encryption settings of the router. But this is only for testing purposes.
    The WiFi network must always be secure.

Maybe you are looking for

  • Firefox does not display buttons or input boxes

    Since the last update, FIrefox is virtually unusable. I do not see the boxes for data entry and all Web sites look bad without graphic images showing the view buttons, logos and color schemes. I have tried to restart in Safe Mode, Creating a new prof

  • Office, Australia weather radar loops only now work on Internet explore

    Until recently, Mozilla enabled radar loops show on www.bom.gov.au but now only simple images are allowed. Windows 7 Professional with Kapersky intermediate security virus and this has not changed.Internet Explorer displays all these loops.What happe

  • S1800-814 DVD-ROM replacement

    HelloI would ask you whether it is possible to replace the DVD - ROM drive on my satellite 1800-814. I want to buy a DVD - RW (for example NEc 6500 has), but I'm not sure of the compatibility. Thank you

  • Please replace the battery with the correct lenovo battery

    I have a Thinkpad L530 and bought a new battery and when I start it up I get this message (this battery installed is not supported by this system and will not charge.) Please replace the battery with the battery correct lenovo for this system buy a r

  • Another scam Ammyy

    I got a call yesterday from an Indian guy, saying he was from Microsoft.   He said that they have been informed that my computer has been hacked and that it would help me avoid my computer stop completely.   He made me the page of Event Viewer, and t