Satellite L650-11R - its is trolling when the screen is off

Hello people.

I have an interesting problem. In fact, I have a Satellite L650-11R and TV Panasonic TX P42X10Y.

When I connect the laptop and TV via HDMI and everything works as it should be, games, movies, but everything works fine until the screen of the laptop is open. While it is closed or if you switchmake the TV your main screen or the office, the sound in the movies is bad.
And not every 30 seconds or minutes rather than continuous. Picture is great, but the sound is a disaster, even a few seconds do not hear a thing.

The laptop is not even a week, codecs are concerned probably not because the sound works in the movies when the laptop is open.

Any help appreciated

PS Sorry for the English

Advertisement

Hey,.

To be honest, I never heard such a problem. For example if I connect my laptop to TV cable HDMI I always have good sound quality, even I use two monitors or monitors only.

In any case, what operating system you have? You use the version preinstalled Windows or another?

First of all I would update the audio driver. His most recent driver, you can download from the official website of Toshiba:
http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

Tags: Toshiba

Similar Questions

  • Yoga 2 pro 13'3 andro tab stops automatically when the screen is off & dosnt start evn battery is30 - 80%

    Hello

    I am facing this problem with Yoga 2 pro 13'3 pellets. It stops automatically when the screen is off and dosnt start until it is connected to the charger and press the same power button 30 to 80% battery. I don't know what it is. This happens every time

    No help for it?


  • Bluetooth freezes when the screen turns off

    Having a problem with the Bluetooth on my pre. I coupled it with a Plantronics Voyager 855. Initial pairing works very well, but after the screen on the pre turns off, the connection goes bad. When I turn the screen back on, the Bluetooth application on the phone always displays the connected headset, but it is not. If I try to play music, there is no sound, and if a call comes in, I can hear the person on the phone, and not on the helmet.

    About 30-45 seconds after the screen turns off, I hear the high tone of the headset which means that it has lost connection. I don't think that the headset is bad. It worked very well with my previous phone.

    If I have music when the screen turns off, the connection is very good. It's like, when there is no active communication between the phone and the headset, and the screen turns off, the bluetooth on the phone goes into a blocked State. I can restore the connection by turning off bluetooth on the phone and then on again. It reconnects to the helmet, until the next time the screen turns off.

    I tried this to get a better idea of the problem...

    If I remove helmet > disable bluetooth phone > turn on bluetooth on the phone > put the headset in pairing mode, it pairs fine.

    If I remove helmet > disable bluetooth phone > turn on bluetooth on the phone > turn off the screen > wait 45 sec > turn on the screen > put the headset in pairing mode, then it does not.

    Again, it is like turning off the screen causes the bluetooth of the phone hang. Given that the screen turns off fairly quickly, I basically disable bluetooth phone and back on every time I want to use it.

    Any thoughts?

    My problem is solved.  Turns out that I had a defective unit.  He traded last night, and it works fine now.  Got the yellow box this time.  First of all, we had the black cover.

    The swap was a little complicated.  I bought in a store of absolute Wireless in Garner, North Carolina.  It is a reseller of third party.  They did it to a Sprint service center to have a technician "certify" the default before they would replace it by car through the city.  And of course, the service center couldn't do the replacement, so I had to go back through the city to the point of purchase after they certified it.  Best of all, the procedure of "certification" involved explaining the problem to the technician for about a minute, she agreed with me that it was malfunctioned and his writing his employee with the ID on the back of a business card to bring back me to the first shop.  She has not yet turn the phone on itself.  She said pretty much the guy to the absolute Wireless has been a * beep * by sending me to it in the first place b/c, we could just do this by phone.  PITA BREAD.  But I suppose it is, that's what I to do not buy directly from Sprint.

  • Accelerometer turns off when the screen is off

    When testing my application on a Z10 android port the accelerometer turns off when the screen is off. A partial wake lock does not turn the sensor back on. A wake dim screen lock is needed to re - turn on the detector. This behavior forces the screen to be all the time when an application requires the use of these sensors.

    An example would be a pedometer recording the steps throughout the day. In order to operate the screen must be turned on by the application that runs in the background. This will cause a fast draining of the battery and is not an acceptable solution.

    On Android, a partial wake lock is enough to keep the accelerometer running.

    I think this should be reported as a deficiency, a lot of motion carried since Android applications will be blocked by this and my app port is one of them.

    Tested on system Z10, model number STL100-3. Version of the 10.1.0.273 software

    The fix will appear in MR 10.2, 10.2.1 aka.

    I recently submitted a fix for the problem.

  • App background stops when the screen turns off

    I wrote an Android app with a Service that receives events from the LocationService and the accelerometer and always try now to wear 10 BlackBerry. Tests on a Z10 STL100-2 10.1.0.4181

    Once the unit has remained unchanged for some time, the location listener is not registered, in order to save energy, and re-recorded a trip again.

    Don't worry, this can be disabled via the visible activity. But it must continue with the last State (start/stop) after the reboot.

    I even magically figured out how to add additional permissions for the manifest of BAR: "_sys_android_autostart_service" and "run_when_backgrounded".

    But as soon as the screen turns off, my application stops working. No location or accelerometer case being received. Turn on the display again, everything back to normal.

    It is meant to be a question about the accelerometer, but I could not find in the tracker.

    So my questions are:

    -Is it possible to port Android continue to receive events location when the screen is off?

    -Is it possible to port Android continue to receive events of accelerometer when the screen is off?

    -Will my service to continue to operate if more than 8 Apps began after mine? (And the user did not hit the close button)

    -The "headless" 10.2 mode help? (I currently only test with 10.1, because my service provider has not yet unlocked 10.2)

    -Finally, this would be possible with a native application? (I could port the port iOS... lots of fun...)

    Thank you very much for your help!

    PS: If it's of any interest: I use the plugin V1.6.1 Eclipse/ADT to package and install the bar.

    As reported here as well (and I'm sure in other places)

    http://supportforums.BlackBerry.com/T5/Android-runtime-development/accelerometer-turns-off-when-Scre...

    I'm working on a deal in the next version, similar to what we're doing with location requests (in other words, activate us the background mode if your app acquires a partial wake lock).

    Edit:

    So my questions are:

    -Is it possible to port Android continue to receive events location when the screen is off?

    (Yes, but you must hold a wake lock).

    -Is it possible to port Android continue to receive events of accelerometer when the screen is off?

    (For the moment, no, but I'll change that, so it behaves like location.)  Mind you, this could be used to work on old revisions of the software until the native sensors team added a background of sensor mode which is disabled by default and must be explicitly enabled).

    -Will my service to continue to operate if more than 8 Apps began after mine? (And the user did not hit the close button)

    (There are a lot of thing that matters if your Services happens to run or not, which is not limited to, but includes the number of applications already running and the status of the device memory).

    -The "headless" 10.2 mode help? (I currently only test with 10.1, because my service provider has not yet unlocked 10.2)

    (No, it's a native thing.  Your application is already technically without head)

  • Pre Bluetooth crashes when the screen turns off

    Having a problem with the Bluetooth on my pre. I coupled it with a Plantronics Voyager 855. Initial pairing works very well, but after the screen on the pre turns off, the connection goes bad. When I turn the screen back on, the Bluetooth application on the phone always displays the connected headset, but it is not. If I try to play music, there is no sound, and if a call comes in, I can hear the person on the phone, and not on the helmet.

    About 30-45 seconds after the screen turns off, I hear the high tone of the headset which means that it has lost connection.

    I don't think that the headset is bad. It worked very well with my previous phone.

    If I have music when the screen turns off, the connection is very good.

    It's like, when there is no active communication between the phone and the headset, and the screen turns off, the bluetooth on the phone goes into a blocked State.

    I can restore the connection by turning off bluetooth on the phone and then on again. It reconnects to the helmet, until the next time the screen turns off.

    I tried this to get a better idea of the problem...

    If I remove helmet > disable bluetooth phone > turn on bluetooth on the phone > put the headset in pairing mode, it pairs fine.

    If I remove helmet > disable bluetooth phone > turn on bluetooth on the phone > turn off the screen > wait 45 sec > turn on the screen > put the headset in pairing mode, then it does not. Again, it is like turning off the screen causes the bluetooth of the phone hang.

    Given that the screen turns off fairly quickly, I basically disable bluetooth phone and back on every time I want to use it.

    Any thoughts?

    My problem is solved.  Turns out that I had a defective unit.  He traded last night, and it works fine now.  Got the yellow box this time.  First of all, we had the black cover.

    The swap was a little complicated.  I bought in a store of absolute Wireless in Garner, North Carolina.  It is a reseller of third party.  They did it to a Sprint service center to have a technician "certify" the default before they would replace it by car through the city.  And of course, the service center couldn't do the replacement, so I had to go back through the city to the point of purchase after they certified it.  Best of all, the procedure of "certification" involved explaining the problem to the technician for about a minute, she agreed with me that it was malfunctioned and his writing his employee with the ID on the back of a business card to bring back me to the first shop.  She has not yet turn the phone on itself.  She said pretty much the guy to the absolute Wireless has been a * beep * by sending me to it in the first place b/c, we could just do this by phone.  PITA BREAD.  But I suppose it is, that's what I to do not buy directly from Sprint.

  • Sound and SoundChannel question when the screen is off

    Platform: AIR 3.8 on Andorid

    Classes: SoundChannel & Sound

    Background: I am writing an application that plays the songs one after another. I'm listening to the SoundChannel instance soundComplete event. When the current song is finished, it will create a new Sound object, the sound will then load a URL and play the next song. It worked fine when the application is activated.

    Question: when the application is reduced or if the screen is off, the next song will not be played. I have to switch him back to the app or turn on the screen, then the next song will be played automatically again. I don't know if it's because the of the SoundChannel object soundComplete event will not fire when the screen is off, or if it's because the Sound object doesn't start loading when the screen is off.

    Resolved by the update to version swf SDK 3.9 and export 11.9

  • FM Radio has its out only when the screen of the phone is turned off

    FM Radio has its out only when the phone screen is turned off. Even for the speakers or headphones.

    I SOLVED!
    I had turned on 'Ok Google' and set it listening to "from any screen. Looks like Google to try and listen to all the time and blocks Radio FM output for headphones and speakers

  • U2715H - Windows automatically resized when the screen turns off then turn it back on

    • Windows 8.1 Pro
    • 1 single monitor connected to the PC
    • native resolution 2650 x 1440 at 60 Hz the value
    • through CDM of the monitor to the RFP the ti EVGA 750 SC (cable Dell)
    • all drivers updated on 28/12/15

    I just bought this monitor and I noticed this strange behavior. Whenever I have turn off the monitor (or it will turn off by itself), if I didn't have a maximized window, all windows (regardless of size) gets automatically resized to fit in the left upper quadrant when the screen turns back on again.  If I had something full screen, this behavior does not occur.

    I find this very annoying. This behavior happened with my previous monitor, which was only 1080 x 1200.

    I was unable to find any setting for the U2715H disable this "feature". This isn't because EasyArrange from Dell. I do not use this feature. And this always happens with Display Manager not installed.

    Is it just a 'feature' of Dell U2715H? Is responsible for Windows? Help, please.

    TIA

    There was no pilot or changes to the hardware of my first post.  BTW, my monitor is a Rev A02.

    A few days after my previous message, another question emerged.  Monitor flash intermittently ON / OFF every few seconds.  I unplugged/replugged the cable CDM - DP and that seems to fix things... until the next day.  This time, I nothing could fix the random rotation power SWITCH of the monitor.  Desperate, I decided to plug an old HDMI cable, I had to hang out.  Flashing problem has been resolved.  Not only this, using HDMI solved my original problem of auto resizing windows.

    The solution to my original problem: use an HDMI cable.  I went to the Dell CDM - DP cable and the problem has been resolved; no more windows resize automatically when the monitor turns off in sleep/towers.  I always get the native resolution at 60 Hz and there is no noticeable disadvantages to the use of the HDMI versus DP interface.  I've been using the HDMI cable for about a week and there is no other issue.

    Just for additional verification, I bought an Accell UltraAV DP - DP 1.2 cable (B142C-007 b-2), one of the few officially approved by VESA (see link below).  Using this cable does NOT my automatic window resizing problem original.  I do not use it long enough to see if they would prevent the random flashing question.

    I still don't know the exact cause of my original question.  I guess it's a driver problem with DisplayPort standard.  But if you do not need DP 1.2 functionality, I suggest that you just use your GPU HDMI output (if she has a).

    www.DisplayPort.org/.../How-to-Choose-a-DisplayPort-Cable-and-not-get-a-Bad-One

  • Connection Bluetooth SPP suspended when the screen turns off

    Hello

    I have a weird behavior of my application connected to Bluetooth.

    The Bluetooth of my application part is identical to the bluetoothchatspp. The connection is made in this way:

    bt_device_init (BTControllerCallback);
    bt_spp_init();

    bt_spp_open (m_remoteAddress.toAscii (). Data(), (char *) SPP_SERVICE_UUID, false);

    using

    SPP_SERVICE_UUID as '00001101-0000-1000-8000-00805F9B34FB '.

    If I disable the screen timeout with this qml command "Application.mainWindow.screenIdleMode = 1" then I can send and receive data via SPP for hours.

    Now, if the screen times out, exactly 10 sec after the time-out period (regardless of the timeout settings is), the BT link is suspended which means no data are sent and received. I measured this interval using the system clock and catch the signal with this command:

    connectResult = QObject::connect (bb::cascades:Application:instance (), SIGNAL (asleep ()), this, SLOT (onAsleep ()));

    Once the screen is again (make a shot for example) then the resumption of transfer of data without breaking the BT link.

    Is there a feature suspending BT SPP link when saving the screen turns off?

    I need to read stream data from my sensors so I need to disable this feature.

    You have the

    run_when_backgrounded
    

    authorization to the handle bar?

  • Satellite L315 - LCD can not illuminate when the screen is completely open

    The operating system works fine, but the screen went black when opened more than 60 degrees. If it is closed less than 60 degrees, it works again, but it is difficult to see the screen of this angle of gene.
    I cleaned the surface of the screen and it didn't work.

    I bought the laptop from China PR, July 2008, I always keep the receipt but cannot find the warranty card.

    Can I still get aid from the United Kingdom?

    Hello!

    > I'm currently in Glasgow, you know how to find an ASP?
    Yes, you can search the site from Toshiba for the nearest ASP.

    Here is the link:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

    I hope that it s useful to you. :)

  • Windows 7 will not change main display when the screen is off

    Hello

    I am running Windows 7 Professional 64 bit on a computer laptop Dell Precision M6800, Nvidia Quadro K3100M graphics card.  I have a 3-monitor Setup: a monitor being the laptop LCD and the other two being Dell U2414h.  My laptop is on the far right.  I had these in extended mode with the installation of Garland Display Port 1.2 for about 1.5 years.  Due to the massive headache of configuring Garland DP1.2 is not not reliable (tons of forums about this) with these monitors, I recently bought a HDMI 2.0 cable so that I could run a U2414h off the coast of the DP1.2 port on my laptop and the other U2414h on the HDMI port on my laptop.  When all three monitors were turned on, I like my main screen for the monitor at the far right.  With the previous configuration of Garland, my main screen would move left to right like my monitors have been disabled (left to right).  With this current configuration (through DP1.2, the other via HDMI), my main screen does not move to my average when the left monitor, we stop, so when I disable my left monitor, I lose my taskbar and all icons (they don't move to another monitor).  Did someone else using a similar setup where they had this problem, and there a will?

    Thanks in advance!

    Have you tried to do the steps on this link?

    Other factors, why you can't reach your goal:

    • Port different types/versions.
    • Port types/versions are not supported.
    • Suggest to use a different separator to display that supports this type of installation.
  • Satellite L650-11R: I can not disable the WiFi using Fn + F8 module

    Hello!

    I have a rather strange problem: I can not disable the WiFi using Fn + F8 module.

    It happens after reinstalling Windows. I installed Windows 7 Pro SP1 x 64 (MSDNAA). I installed the driver Broadcom WLAN, then Toshiba Value added package and Bluetooth Stack from Toshiba Web site.

    When I press Fn + F8 there is only a Bluetooth icon, I can enable and disable. And there is no WiFi icon.
    Wireless network card is listed in the Device Manager, it works.

    Before you reinstall Windows, when I had used pre-installed Windows 7 HP, it worked correctly: there were three icons, I could turn off/turn on WiFi, BT and the two WiFi + BT by pressing Fn + F8.

    Does anyone have a problem like this?
    Can someone help me?

    Thanks in advance.

    Hmm generally the FN + F8 should switch on / off the Wlan correctly.
    Maybe the WLan driver must be installed again even if the wireless network adapter is already visible in Device Manager.
    Try it

    Welcome & good luck

  • Satellite L650-11R - broadcom WLan 802.11n does not

    Hello!

    I had some problems with my internet and everything trying to solve this problem, somehow I uninstalled my network card and its drivers.

    After that (I reinstalled several times), unit is here, but it says in Device Manager that is activated, but when I go to the device in network settings, it says that it is diseblaed and its painted in grey (I clicked, window opens saying "enabaling"... but nothing happens after that). Also, I know that of not work beacause it does not find my home WIFI network and other devices in the House are connected to the home network. In the right corner of the screen there is red ' x'.

    Also, when I run windows repair to see what is the problem of network it says that my network card is probably bad drivers and I should change that.

    I tried a lot of drivers for broadcom 802.11n on the internet, but nothing seems to work.

    My laptop is Toshiba satellite L650-11R
    network card: broadcom 802.11n
    am on Windows 7 64 bit home edition

    Help me to find drivers or tell me how to install correctly with corect NIC drivers.

    Please help, thanks in advance!

    I solved my problem. All the drivers that I tried to install worked

    The real problem was antivirus, I uninstalled Zone Alarm security and now I have internet!

  • Satellite L650-11R - updated graphics card drivers

    Hello!

    I have a Satellite L650-11R(that's what's written on the box) and my problem is that I found the latest drivers for my Mobility Radeon HD 5650 series and when well even as the site of AMD says that this driver is mobility graphics cards when I want to install the computer tells me that these drivers support not my graphic instrument and if I go to Device Manager the only card that appears is the VGA! So now the only drivers that I can install are outdated (8.753.0.0)
    And im wondering why I am condemned to use these wwhen out-of-date driver clearly there's more recent avalible?

    I hope some1 reading this!

    Hi yusty,.

    Why you are looking for on the AMD Web site directly to the latest drivers? All drivers for your computer is located on the Toshiba official European driver download page:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    And I don t understand why it s a problem with older drivers. Not always the most recent driver is the best.
    In addition, only the drivers provided on the official website of Toshiba are pre-tested and designed for your laptop. Install the other drivers that happens on your own risk

Maybe you are looking for

  • Mounting of NTFS disk problem

    I just upgraded the OS to El Capitan v 10.11.5. My (5 TB) ntfs disk won't mount. Tried through the application disk utility and also diskutil command in the Terminal. Everyone knows the same?

  • Tecra S5 - disk hard turn sound

    Our company recently purchased Toshiba Tecra S5. I noticed that the drive have that ticking sound as if there is a watch inside. Is this normal? Anyone of you have this experience too? Thanks in advance for your answer

  • Address bar does not not in Safari

    My address bar does not work properly in safari, I can't click on it and enter the address manually, which is quite annoying. I deleted the plist of safari in the library but still no luck. Found a temporary solution to http://osxdaily.com/2016/01/05

  • Erratic Yoga 11 automatic rotation after updating Windows 10

    Hi guys, wondering if someone else has the same problem and found a solution for me to try: after upgrade to Windows 10, 11 Yoga isn't run properly. I've unlocked rotation via the manual button and going in tablet mode and changing the settings. Nada

  • Unable to access network printer after the last automatic update.

    After automatic security update KB2660465 and KB2661637 today, I can no longer print or access our office network printer. I think it has something to do with the Windows Firewall, but I'm not sure what to change. Any help is greatly appreciated.


HashFlare