Satellite L650-12 q connecting a firewire port

Hello
Could someone please advice how I can connect a firewireport to my laptop. When I did a search, I've gathered that I can connect through the media slot. But there are two types (as far as I know), the card PCMCIA Firewire IEEE 1394 and CARD EXPRESS FIREWIRE.
I don't know which is compatible with my model of laptop L650-12 q.
Could someone please advice.
Thanks for your help

According to description mobile your mobile doesn t have express card slot, so it may be a little more complicated now.
I don't really know where you want to connect the PCMCIA Firewire IEEE 1394 card and CARD EXPRESS FIREWIRE when appropriate port is not available.

I assume that you have need of an external device, such as firewire/usb hub.
Talk to your local dealer and check what options are available.

Tags: Toshiba

Similar Questions

  • Satellite L650 - unable to connect to the public network (has no valid IP address)

    Hello

    Toshiba satellite L650 laptop computer (with windows 7 64-bit), I bought two days back and I'm unable to connect to the public network. Sometimes, it must be connected to the public network and after a few minutes it disconnects. I get the message "wireless network doesn't have a valid IP configuration him."

    I have visited many forums and did everything, but of no use.

    1. people with disabilities the tcp/ip V6 of the registry.
    2. the DHCP is enabled. With the help of the automatic IP (DHCP)
    3. also tried with a static IP configuration.
    4. uninstalled the antivirus provided with laptop computer (Norton).
    5 disabled the windows firewall.
    6. restored to factory settings.

    I called Toshiba Tech support as well and they have suggested that it may be a problem of H/W but I don't think that so that it can be hardware problem because sometimes he must be connected to the public network. Now I'm left with no option except return the laptop to Toshiba (I'm less interested in this because I know that sending laptop for replacement will be more frustrating).

    Can someone please give some other suggestions for this problem?

    Hey,.

    Can you connect to your home WIFI router correctly?

    If you have problems with the public network connection, you should ask the owner of these networks. Usually, there is always a contact, you can ask if you have any problems with the connection.

    What you can try is updated WLAN driver from Toshiba's official website:
    http://APS2.toshiba-tro.de/WLAN/

    If it doesn't work, ask the person contact I mentioned.

  • Satellite A200: How to connect a parallel port printer?

    Probably a very stupid question, but I would like to connect laptop series A200 on a parallel port printer that does not have a USB port... What is the best option?

    Hello

    You ask the best way?
    Well, you have only one way?

    You need an adapter USB to parallel. Check in google for certain offers.
    I searched in google and found some good options.

    Perhaps this might be a good choice;
    http://www.ramelectronics.NET/HTML/usb_printer_cable.htm#UP6C

    Best regards

  • Satellite L650 - unable to connect to the internet after the clean install of Windows 7

    Hi guys

    IM really angry because I just finished installing a new copy of w7 on my laptop (upgrade home pemium to proffesional) and now the ONLY way I can connect to the internet is via a usb device.

    I even tried ethernet and no luck.
    The screen display resolution is also mucked up.
    What can I do?

    Also reset it to factory settings make me reinstall it home premium?
    If so I'll do that but I need to know if this is the case, please

    its a PSK1JE L650 btw

    Post edited by: bilal98

    > I tried Ethernet and no luck.
    > The screen resolution is also mucked up.
    > What can I do?

    You must install the necessary drivers.
    For internet connection, you will need to install the LAN and WLan driver.
    To get the best display resolution install display driver

    > Also reseting it to the factory settings let me reinstall it home premium?
    > If so I'll do that but I need to know if it does, thank you

    Looks like you have already done this as posted here:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=68031

  • Popping / crackling sound when the Satellite L650-1PQ is connected via HDMI

    Hi all

    I have recently connected my laptop to the TV via HDMI, and I hear his pop/cracking every time the music, video or games is played. I tested the speakers with my MP3 player and the Xbox, and there is no POPs or crackles when I'm with them.

    I've updated to the latest drivers from Toshiba, but it has not yet resolved the issue.
    Any help would be greatly appreciated!

    Care of my system is as follows:

    Processor: 2.66 GHz Intel Core i5 480M
    RAM: 4 GB DDR3 RAM
    OS: 64 - bit Windows 7 Home Premium
    Graphics card: ATI Mobility Radeon HD 5650

    > I have recently connected my laptop to the TV via HDMI, and I hear his pop/cracking every time the music, video or games is played

    The crackling is in from the TV speakers. Right?

    Can you hear the Crackle even using headphones or speakers for laptop?
    If not, then I think that this problem could be related to his driver.

    In your case, I would check the settings in the control panel-> sound-> playback-> audio digital-> set up

  • Satellite L300-243 to connect camcorder JVC

    Toshiba Satellite L300-243 was purchased primarily for use with Pinnacle 12 doing video editing.
    My previous PC had a connection to the firewall 4-4, but there is no similar link on laptop.

    Can I use a cable USB 4 - do the download of the camcorder to the laptop?
    Or is there another plug on the laptop I have to use?

    Bob

    Hello

    I guess the JVC Camcorder supports firewire interface and it was connected to the computer via a firewire cable.

    Unfortunately, it seems that the Satellite L300-243 does not support firewire port.

    In your case, you could buy an Express card that contains the firewire port.
    Then, you can connect the camcorder to the laptop.

    See you soon

  • Satellite A100 doesn't detect camcorder connected to the firewire port

    Recently, I upgraded my Satellite A100 for XP Pro SP3.
    In order to capture the video from my camcorder Canon I attached the camera to the 1394 port, but the computer does not detect my camera.

    I have changed the cable, restored the software factory default but the presist still problem.
    The camera works fine with another computer, which means that there is some setting or a hardware problem with 1394 port.

    Help, please.

    Hello

    Did you check device manager if the IEEE 1394 (firewire port States) bus host controller has been recognized correctly?
    Are there any yellow exclamation marks?

    Try this workaround:
    -in Device Manager, remove the IEEE 1394 bus host controller
    -restart the laptop
    -Wait that windows reinstalled this controller again
    -Connect the camera and turn it on.

    See you soon

  • Satellite L650 - 1 DG - LAN is no longer connect to 1 GB

    Hello

    I have 3 laptops Satellite L650 - 1 dg ethernet port used to connect to 1 GB. Some time in the past months, it stopped. I tried the latest Atheros driven site without success.
    Windows says that the hardware is an Atheros AR 8152 PCI E Fast Ethernet Controller but it used to connect to 1 GB.
    Someone at - it ideas?

    Thank you

    Andy

    You are right. This model of laptop has Atheros AR8152 10/100 Base-TX LAN card.
    Now to maybe stupid question, but what is your problem. Is the transfer of data via LAN card too slow or what?

  • Satellite L650-11F - how to connect to LCD via an HDMI cable?

    Hello world

    I have the Satellite L650-11F with ATI 5650 and HDMI port and I want to connect the laptop via HDMI lcd screen so that I have some office using 2 * ATI Catalyst * and * software HydraVision, but ATI sites said that Toshiba notebook is not supported (Please check with your mobile phone OEM for support of the drivers for these laptops).

    So, how can I connect my laptop to LCD screen to get 2 workstation?

    Sorry for my bad English :)

    Hi thebluewriter,

    I think you need to check only the other discussions of the forum on the connection for laptop LCD screen. You will find enough about it!

    In any case, most recent display driver you can download on the official website of Toshiba, but usually it s preinstalled on your laptop.
    If you are using a HDMI cable, use just FN + F5 key combination to switch between monitors. All that s! :)

  • Satellite L650-0ED - ports external monitor and turn off WiFi

    Hey,.

    1. I have a Satellite L650/0ED, I was wondering if the HDMI and the external monitor port start when starting and if they cause the start time of the laptop to be slower. If they do slow down the start how disable them you using Device Manager, since I looked, I tried to disable the Device Manager; but I can't find them anywhere on the list of devices.
    They have a special code name or something?

    2. based on my understanding, the manual of instruction/userguide Toshiba mentions if I press FN + F8 it turns off the wireless amber light but this is not the case, since the amber wireless is still or not. I have the wireless active or disabled.
    It say it's so I have the wireless off of amber or the - Orange must be turned off when I press FN + F8 and is not, why is this?

    Thank you

    Hey Buddy,

    1. No, they cause t a slower start. He doesn't know me and as long as I know it of not possible to disable the ports in the BIOS. Then n t you worry about this, even, you have connected external screens, boot time is the same.

    2. Yes, usually you can activate the WLAN functionality by using the FN + F8 key combination.
    I put t have the laptop in front of me, but normally if you don t have a hardware wireless switch, you can disable the wireless network adapter in the BIOS. Just put permits for disabled people and that should be all! :)

  • Satellite L650 - eSATA port works not

    Hello

    I am owner of a [Toshiba Satellite L650-14F | http://se.computers.toshiba-europe.com/innovation/ro/product/Satellite-L650-14E/1086065/] laptop that is running 64-bit Windows 7 Ultimate.

    I recently acquired a [ICY BOX IB-319StUS2-B | http://www.raidsonic.de/en/products/external-cases.php?we_objectID=6831] drive enclosure external HARD who takes in charge the SATA II 3.5 "hard drives and can be connected to the computer via USB 2.0 or eSATA.

    I use it with a Samsung SpinPoint F3 1 TB HARD drive. The problem is that I can't get the eSATA port to work. I enable in the BIOS, SATA interface is defined on the performance and the AHCI mode. I installed the latest Intel drivers for the SATA controller and eSATA, as well as the software Intel Rapid Storage Technology (RST). If I connect to the enclosure via eSATA, that nothing is happening. Intel RST makes external SATA port as empty and no drive appears in Device Manager in Windows.

    The drive works properly by the USB bus and even via USB in the eSATA port, because it is a port eSATA/USB combo.

    At first I thought it was a faulty box or cable eSATA, with which it came, so I returned it and got a new. However, after seeing that the new behaves exactly like the one I started wondering if there isn't a problem with the hardware with the laptop. I started searching the Internet for similar behavior. I met a lot of reports of external hard drives not recognized on eSATA in Windows 7 64 bit, but work fine on XP or Windows 7 32-bit, especially with 1 TB drives and more.

    I've also seen a few similar reports with eSATA on Toshiba laptops on this forum. I'm not really sure how to proceed in this case, or what can I do else except for the installation of Windows XP and Windows 7 32-bit to see if it works there. But even if it works, this still does not resolve my problem. I don't want to go back to XP, and I would not like to use Windows 7 32 bit on a system with 4 GB of RAM.

    Any other suggestions would be appreciated and as I open this thread for other people in similar situations to contribute their experiences. What worked and what didn't.

    Thanks for the comments.

  • Positioing on Satellite L650-1MC USB port

    I just bought a Satellite L650 1MC having already owned a previous version. The amount of the fine with the exception of one major flaw - the USB ports are on the side rather than on the back, so I have cables around the office (mouse, printer and disk backup). Those on the right also fault the CD player when you try to use it?
    Why is it was designed this way?
    Someone else has this problem and is there one solution other than buying an expensive hub wireless router or wireless peripherasls?

    I can't tell you why it is designed on this journey, but the best way to get rid of a cable (mouse) is to use the mouse with receiver microphone wireless. Even if you take your laptop with you, it doesn't have to be removed.
    I assume that the backup device and the printer should not be connected all the time. You have a mobile device and it is designed to be with you everywhere.

    If you use it as a desktop replacement, I think you should get a small USB hub. I put t see any other solution for you.

  • Satellite L650 - lost the WLAN connection after upgrade to Win8

    I downloaded windows 8 on laptop Toshiba Satellite L650 of my partner and now the wireless connection does not work.
    Get Wi - Fi devices but the Toshiba is not now after the upgrade.

    I read somewhere that it may need new drivers or something like that, but I'm not tech savvy and don't know where to start.

    Can anyone help? I use another laptop for this post because there is no connection on the Toshiba.

    Thank you

    In a first time can you please post exact model laptop (L650-xxx) number?
    I want to check what WLAN card is inside.

    Open the Device Manager and check the status of the WLAN card. Please post comments on this basic information.

  • WiFi connection falls back only when the Satellite L650 is sitting on the glass desk

    Since I bought a new Ikea glass desk, free wifi on my laptop Toshiba has been stalling. It took me a while to put the two together.

    Whenever I'm sitting there on the desk, wifi is de-energized, but as soon as I took it off the table, wifi will reconnect immediately and it works normally.

    I used it on a covered with _wooden in the same region and it works completely fine and never gave up.

    I recently bought a Toshiba wireless mouse which said seller works on any surface. Well, it doesn't work on my glass desk and I had to buy a mousepad for that and now it works...

    I'm using Windows 7 Home Edition premium on a Toshiba Satellite L650 laptop computer model No.: PSK1JA - 0K 3017.

    Please help me solve this problem! What can I do to stop falling out wifi while it sits on the glass desk? All responses are much appreciated thanks!

    Hi Chan

    I m very surprised after reading your interesting ad. To be honest, I use Toshiba laptops for a long time now and I ve never used on glass desk so I don't have any experience with this issue and I also think that you are the first person that relates to this topic.

    It's a really new and very interesting information. I m really interested on this thread and I would like to hear more of other people who use the glass desk.
    What to do about it? Simple question, but I fear none of us can give you good advice on this topic m.

    OK it's a nothing with your question, but if you use it on the desktop you can use the connection to the LAN? I mean that if you may have a kind of Home Office you must connect using the connection to the local network. I do though that the WLAN router is active.

  • Satellite L650 Wireless disconnects and connection cannot be retrieved

    Hello everyone,

    I have a connectivity problem with my 3 year old Satellite L650, Windows 7...

    I have a LAN wireless in my house, so that my laptop will automatically connect at startup, without any problem.
    After some time (it can be minutes or hours) it loses signal and disconnects.

    This isn't a real problem, because the router is quite far from here, with walls between which can reduce the signal, so no surprises.
    But I can't reconnect later: connection status icon stops working.

    I mean it shows the image corresponding to "available wifi connections" or "connected but no internet access, but or by clicking on the icon or move the cursor of the mouse on it gives no output... it is responseless, and I can't connect to my wifi or any other wireless network.

    I tried to do it from the control panel - network and sharing Center, but the story is the same, the two "set up a new connection or network" and "connect to a network" is not responding when you click on it.
    The only way to connect is to restart the pc.

    How can I solve this?

    Any suggestion is appreciated,
    Thank you!

    > The only way to connect is to restart the pc.
    In case this question is repeated once again, try to refresh and renew the IP address.

    Go to the console (in the type of search CMD)
    Now use the command: ipconfig / renew

    After this attempt to connect to the Wlan again.

    In which case it would not be useful, I recommend you to change the settings of the router.
    I mean that you need to reset the router. Then, you need to test with different types of protection Wlan Wlan connectivity and other standard Wlan (802 11 B G or N)

    Test also the laptop with open WiFi. I mean, you must disable the encryption settings of the router. But this is only for testing purposes.
    The WiFi network must always be secure.

Maybe you are looking for

  • Virus attack/infected system detected Norton AntiVirus.

    I got a message from my Norton Antivirus program as follows:"System infected: TidServ activity 2."  Computer attack: Io4undreyk.com (93.114.40.221, 443). The attack was a result of the \DEVICE\HARDDISKVOLUME1\WINDOWS\SYSTEM32\SVCHOST. EXE. "Source ad

  • Addition of E1550 Repeater

    Hello Forgive the deep ignorace arising from the nature of the questions. I have a Linksys E1550.  I would like to extend its range by using an old Netgear N600 I have laying around.  I know that the Netgear can be used as Repeater.  I don't know wha

  • Why my clock keep going back to the military times

    Why my computer time change to military time?

  • How to set the background color for the Webworks Menu?

    Hi all I have developed a web application that uses the emulator to ripple and Blackberry Webworks SDK 2.3.1.5.In I added the Menu items on the Blackberry Menu button... It works well... It contains the background color by default for Menu (Black)...

  • 404 error when the Peoplesoft Login Weblink access

    Hello everyone,I did the installation of the Poeplesoft FSCM 9.2 on a windows server computer. Now the installation document, I should be able to access the weblink connection peoplesoft. But in my case I can't. I m using the following link. http://<