Satellite L650-12 q - external monitor through HDMI problem after waking up

Similar Questions

• Satellite L650-0ED - ports external monitor and turn off WiFi

  Hey,.

  1. I have a Satellite L650/0ED, I was wondering if the HDMI and the external monitor port start when starting and if they cause the start time of the laptop to be slower. If they do slow down the start how disable them you using Device Manager, since I looked, I tried to disable the Device Manager; but I can't find them anywhere on the list of devices.
  They have a special code name or something?

  2. based on my understanding, the manual of instruction/userguide Toshiba mentions if I press FN + F8 it turns off the wireless amber light but this is not the case, since the amber wireless is still or not. I have the wireless active or disabled.
  It say it's so I have the wireless off of amber or the - Orange must be turned off when I press FN + F8 and is not, why is this?

  Thank you

  Hey Buddy,

  1. No, they cause t a slower start. He doesn't know me and as long as I know it of not possible to disable the ports in the BIOS. Then n t you worry about this, even, you have connected external screens, boot time is the same.

  2. Yes, usually you can activate the WLAN functionality by using the FN + F8 key combination.
  I put t have the laptop in front of me, but normally if you don t have a hardware wireless switch, you can disable the wireless network adapter in the BIOS. Just put permits for disabled people and that should be all! :)

• Satellite L650 - black on the monitor is not 100% black

  Hello
  first sorry my English is not good at 100%, but I'll try my best.

  I have a new Toshiba Satellite L650 and I see a little problem of color on the screen. When I turn on the computer, when the lights to light up the screen, black is not 100% black, its more like dark blue, not a lot, but I can see the diference. When comes to windows 7 still have same problem of color issue. I tried to calibrate colors, but they all up looks normal to me because I have to another (older) Toshiba and the colors are great, very good.

  I've updated the bios and graphics of the main card and still no improvement. I tried also calibrate the colors in the main graphics tools (ATI) and the problem persists. In addition, in games, the color doesn't seem 100% good.
  Can we say its problem of monitor?

  Hi, Flip,

  I put t know if it s a monitor problem or not, but you should test an external monitor to your laptop computer. In order to check if it s associated with internal monitor or not.

  In the settings of the display driver, you can adjust the colors. You need to test it with the default settings, instead all colors maximum.

• Satellite A300-237 - what external monitor?

  Hello

  I would buy an external LCD 19 "monitor for my Toshiba Satellite A300-237. Which is better: 4:3 / 16:9 / 16:10 / 5:4?

  Thank you

  Hello

  What image format you prefer?
  You should buy a monitor with your favorite image format.

  Generally speaking all the works according to the user manual and external monitor, your laptop supports up to 2048 horizontal and 1536 vertical pixels up to 16 m of colors on the external monitor.

• Dynadock and Satellite Pro U400-135 - external monitor question

  Hello.
  We have a serious problem on the 26 dynadock vga e Satellite Pro U400-135 unit

  The problem is:
  If set to host as a single external monitor during startup frequent windows loses resolution external monitor.

  Example of resolution monitor post seting like 1280 x 1024, start with connected dyndaock, frequent resolution 1280 x 800 not correct and external monitor image not correct.

  Operating system is Vista 32 bit, driver dynadock is 2.3 update and dynadock displaylink displaylink site 4.6.16208 site.
  Same problem with Windows Xp 32 bit.

  How can I solve the problem?

  Hello

  If I understand the first message, external monitor resolution automatically goes to 1280 x 800 even if you set it to 1280 x 1024.
  I guess that your external monitor is connected to the dynadock.
  Is this good?

  AFAIK, you can customize the video settings of the dynodock.
  It provides a video output in two modes: Mode and extended Mode of mirror.

  Mirror mode creates an identical display of your computer to the external monitor screen. In mirror Mode, the dynadock automatically selects the settings (screen resolution, color quality and discount rates) for the external monitor that will allow the best resolution based on your computer's settings.

  Maybe you use the mirror mode and therefore the dynadock the resolution automatically because it of the best for the external monitor.

  I recommend checking the Dynadock manual for more details.
  There are two modes are described there.

  Welcome them

• Satellite A500 and use external monitor

  Hello

  I bought recently (yesterday) a Toshiba Satellite A500.

  I am using an external monitor AND the laptop screen. At this point, the two screens are working well but have the same images/windows.

  I want to do is have each screen show another window/program running and being able to drag and drop etc seamlessly between screens.

  When I bought the laptop, I asked about this and was informed that Windows would recognize the second monitor and would encourage me to choose from a list of display options, however it is not happened.

  Can you help me?

  Kind regards

  What you need is the parameters of good monitors. So what you have now is the clone mode and you need to enlarge the bureau. I put t know precise adjustments on this model of laptop, but enter the screen resolution settings and check if there is possibility to enlarge the bureau. If not, t go into the advanced settings and check if you can find it here.

  I Don t monitor external and impossible to check it for you, but I m you will find.

• Re: Satellite A660-10W - connection external display with HDMI cuts sound on

  When I use an external display via the HDMI, it mutes the sound of the laptop.
  It's OK because the external display has a headphone/speaker output jack.

  However, when I close the external screen (which I use for movies only) and to use the laptop only, the sound is cut all the time that the HDMI cable is connected.

  I can't hear sound - by harman/kardon speakers or headphone - when the HDMI cable is disconnected (if the external display is turned on or off).

  Is there a way to allow me to have the choice and use her laptop - even when the HDMI cable is connected - in order not to keep plugging and plugging on?

  Thank you

  It is clear.
  If the HDMI cable is connected, then the digital output is defined as audio output by default and therefore you do not hear the sound of the internal speakers but on external monitor speakers.

  You need to change the sound settings.

  Go to control panel of-> sound-> reading tab and set the speakers to laptop as default.
  Then you should hear sound from the speakers for laptop!

• MacBook pro at 1920px external monitor via hdmi?

  I just got MacBook pro 13-inch retina and the default resolution is 1280px in width, and the maximum value is 1600px.

  If I connect the laptop to an external monitor via HMDI 1920px resolution, the resolution will actually be 1920, max mobile as 1600?

  You can set the external display to the monitor native resolution or HDMI resolution according to your preference.

  Don't use mirror display on external monitor because when you mirror on the screen display resolution is also in reverse. Use extended display mode.

• L50-B-1VP satellite does not recognize external monitor

  I recently bought by Satellite L50-B-1VP and I have some problems to connect it to my TV.
  I tried to use an HDMI cable and a VGA cable, but nothing happens.

  The cables and the TV are ok because I've used them before.
  When I try with the HDMI, it is said; no signal detected, but using the type TV VGA cable of restarts and the screen is black. I am using Windows 7 32 bit and I tried Fn + F4 and also Windows + P.

  The problem is that the external TV is not recognized and it does not appear in the display settings.
  What can I do?

  If someone could help me I would appreciate it a lot!

  The phone is sold without a preinstalled Windows System. It seems that you have installed and configured Windows 7 at your own hand.

  Well, I guess that the problems with the video output may be related to missing drivers or a bad configuration of the system.
  From my point of few, you check some key points.

  First I would recommend you to check if the essential graphics driver has been installed.
  The laptop does not support dedicated graphics card, but the CPU (Intel N3540) provides internal GPU Intel HD Graphics.

  So I recommend you to reinstall the Intel and the Intel Chip Set Utility display driver

  Your comments would be appreciated

• Max Resolution for external monitor via HDMI on Lenovo Y700?

  Hello

  I hope that someone has experience with external monitors on a computer laptop y700.

  I would like to ask if my laptop Y700 supports resolutions higher than 1920 x 1080 for external displays via HDMI.

  My model is:

  https://www.Amazon.de/Lenovo-i5-6300HQ-quad-core-Prozessor-Betriebssystem/DP/B016QB9HZK/ref=sr_1_2?i...

  I want to use a monitor with a resolution of: 2560 x 1080

  https://www.Amazon.de/DP/B00TF0X37I/ref=wl_it_dp_o_pC_S_ttl?_encoding=UTF8&ColId=31RP1ZDSM66ZA&colii...

  Is this possible with my laptop. And it is even possible to connect a 4K screen?

  Thanks in advance for your help.

  So finally, I tried to connect my laptop to a 2560 x 1080 widescreen-resolution-display via HDMI in an electronics store:

  THIS MARKET! It is not a problem to run it with 2560 x 1080 at 60 Hz. The only problem might be a 4K resolution screen that it only works with 30 Hz, because it's an HDMI 1.4 port.

• external monitor X120e HDMI 1920 x 1200?

  Hello

  I have a 24 "1920 x 1200 external monitor, and I want to buy model x120e, for use with this monitor. It will work on the native resolution?

  I read this E-350 processor, supports HDMI v1.3, which supports up to 1920 x 1200, but ot from other sites I've read advice support only up to 1920 x 1080? What maximum resuluton supports the x120e on HDMI output.

  Thank you.

  Yes it will work at this resolution. It is actually 2048 x 1152, but this resolution is not commonly used, so most of the references would state 1920 x 1200 or 1920 x 1080.

• Latitude E6440 display blink when connect you to an external monitor via hdmi to VGA Converter

  Hi Dell Community,

  Please help me diagnose what's wrong with my new laptop.

  My laptop is Dell Latitude E6440, but whenever I connect external monitor to my laptop HDMI via HDMI port to the converter VGA, the external monitor still flashes randomly every two seconds. This VGA HDMI converter / works fine when I used it on the other laptop.

  Currently I still have the chance to try my laptop HDMI port to connect directly to a HDMI monitor because I don't.

  Is it that someone has the same problem with me? Thanks for your help.

  Dell currently manufactures replacements of main card to resolve this problem. They will be available at the end of July. Please make sure you have a current subscription and contact support to be eligible for replacement.

• External monitor (projector HDMI) not recognized in CC AE or AE CS6 with the new Macbook Pro

  You have a very difficult problem that maybe someone can help me find a solution.  I had an old Macbook Pro (2009-ish) I was using with AE and my HDMI projector to do the work of projection mapping.  The laptop computer motherboard used recently (not linked, I don't think) but now I bought a new Macbook Pro and am trying to use the HDMI output to the projector as my external monitor in After Effects (I tried both CC and CS5.5 and CS6). Under Preview video it does not appear as an option to send to (the choices are computer monitor only or Firewire).

  I'm a mess that I'm supposed to do a show tonight with the installation I did many times with my old Macbook and AE and now can't do it at all. I have to be able to have the projector receive EI feed - and nothing I've done so far has helped. The system sees the projector, then why doesn't AE?  I can't drag the window of the program in the projector window space and expand - there must be exactly 1920 x 1080 in order for me align correctly.

  If there is Adobe TAPI people this morning, I'd CERTAINLY appreciate your comments, as well as any other person who might have had similar problems. It should work, it should be a no-brainer. Right now I'm running a new STANDARD Apple Macbook Pro with HDMI output and the latest version of AE CC with all updates done. Please, please help!

  Thanks in advance,

  Bill

  After Effects does not come with components for an HDMI output.

  Your other computer must have installed additional components that adds this functionality.

  See this thread for more information:

  http://forums.Adobe.com/thread/1006705

• Satellite L650 - no sound external subwoofer, from speakers

  Hello

  I recently acquired a [Toshiba Satellite L650-14F | http://se.computers.toshiba-europe.com/innovation/ro/product/Satellite-L650-14E/1086065/] laptop comes with no OS.

  I installed Windows 7 Enterprise 64 bit on it as well as all the pilots involved, including the [last driver sound | http://se.computers.toshiba-europe.com/innovation/download_driver_details.jsp?LNG=27&service=SE&selC fulltext = 2 & selFamily = 2 & selSeries = 178 & selProduct = 537 6 & selShortMod = 1000 & language = all & selOS = 30 & selType 4 2 = & yearupload = & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = all & selectedLanguage = all & type = 42 & page = 1 & ID = 74 199 & DISO = 30 & driverLanguage = 42].

  The audio chipset seems to be Conexant SmartAudio HD CX20671. However, when I connect my Logitech 2.1 audio system (2 speakers, 1 subwoofer) via the headphone jack, I have no sound in the subwoofer, only the speakers.

  If I right click on the sound Manager icon in Windows 7 and select "Playback devices" then Conexant and set up, I can only see the Audio channels: stereo and no other options. It's 2010. HD audio has been around for some time now. I sincerely hope that Toshiba did not have a modern laptop with only stereo support.

  Any help to get the subwoofer will appreciated.

  Hi Skello,

  What Logitech speakers, you have exactly? Which audio port do need?

  Have you already tested the speakers on another computer to test if the subwoofer is working correctly?
  All cables are connected correctly?

  Also check the Windows sound settings. Change the settings for desktop speakers as Akuma wrote.

• Satellite U300-113 and external monitor use

  I have, what I thought until very recently, a very simple need: I would like to connect an external monitor on my laptop, but on the continuation of the investigation things seem much more complicated about resolutions natives and elongation.
  Is there anyone who could recommend an acceptable quality monitor that is proven to work?

  I think that you should check the resolutions supported for external monitors and I think you can find answer in user manual s on page 119. To have a perfect image on external screen, you should buy external display with a native resolution listed in the table of user s manuals.

  Also talk to your local dealer. Perhaps you can test the functionality in the store before buy you.