Satellite L650 - 12N USB Ports does not work

My satellite L650-12N usb port does not work. I did everything that I could and it does not work.
It shows a yellow exclamation mark on my system.

I try so many ways, including the recovering auto troubleshooting, formatting and system he could not work.
Under the key USB gives error code 43, I do not understand.

The webcam and the wireless card no more.
This boot problem after a storm in my area some time ago.

Please can someone help.
Thank you


> This problem start after a storm in my area some time ago.

Because other devices don't work properly and because procedure didn t get it back help you solve this problem, I think that the problem is related to the hardware malfunction possibly that the motherboard was hit by lightning, which would explain the problems

I think you should ask the maintainer authorized Toshiba in your country to check the motherboard.

But in my opinion, that the warranty does not cover the issues of environmental impact maybe your household insurance could help you

Tags: Toshiba

Similar Questions

  • NB200-12N - USB port does not work


    I updgrade my OS from windows 7 starter edition to now a windows 7 home basic 32-bit usb port does not work is the (only) in the left near card reader sd and lan.
    Can you please hellp me to install it? I have download the drivers from Toshiba for my NB200
    But does not work.

    Thank you


    If everything is OK and right drivers all USB ports should work. You cannot install the drivers for each port separately and force one of them to work properly. On this machine, all three ports are the same USB2.0 ports.

    Try reinstalling the chipset utility.

    By the way: two other ports work well, right?

  • Satellite Pro 6100: USB port does not work after the return of the mode "Eve"

    I have a strange error on my USB ports on Satttelite Pro 6100 with XP SP2.

    Two USB 1.1 ports work fine after cranking up what the laptop goes into mode 'sleep' (automatically or manually).
    The restart afret optical mouse connected to the USB port does not illuminate and the XP system displays the error message on the device not recognized on USB port.

    Plug the mouse on or off doesn't change anything. Only restart helps.

    Any ideas?

    It's very strange, but it will be interesting to see if the same problem persists with other USB devices. Can you test and post again on the results?

  • Satellite A10 s203: USB ports does not work

    Hello! All of a sudden my usb ports do not work on my satellite sa10-s203. Tried everything (even restarted the ashes of l-top nothing happened.) Enybody can help me? Kris...


    If the USB ports are properly recognized in device then as Quad Manager said it could be an external problem. The USB port is 500mA power. If the external device requires more power to work in this case, it of necessary to use the external power supply.

    Good bye

  • Satellite L40 - 18W - USB ports does not work after format HARD drive

    I formatted my laptop "L40 - 18w" after that all usb ports do not work.

    Could you please help me on this issue

    Thank you

    Ben is right. After the installation of the operating system as a first step, you need to install driver chipset.
    Please see the download page for Toshiba under
    There you can find all the drivers for your model of laptop including driver chipset.

  • Satellite M300 - left USB port does not work


    I have a M300 Satellite, with a USB port on the right and the other on the left side. The one on the left has never worked with anything. Its never bothered me until now - I bought a portable HD and I need to connect it and a mouse at the same time...

    Interesting note though that when I put the laptop HD in the left USB port, the led lights, hard disk. The lappy himself made no sign he knows its there and I cannot access it, however...

    Any advice? Thank you very much!


    I guess, it is burning or something like that. You can buy a USB hub, it's a device that develops a single USB port into several so that there is more available ports to connect devices to a host system. It's not expensive and you connect many devices.


  • Satellite A200-13O - USB port does not work

    Can you help me? I have a new Satellite A200-13O, USB does not work.

    Hi Gilbert

    What do you mean exactly with the USB does not work?
    You plug the 3rd USB external devices advantage, which cannot be recognized?

    Have you installed all necessary drivers for these devices?

    What operating system do you use? If you are using Vista are you sure that the external USB device is compatible and supports the Vista operating system?

    Please post more details!

  • Satellite A135-S2286 - USB ports does not work after BIOS update

    I recently had the dreaded BIOS password prompt problem. I checked online to the toshiba support site and took the laptop to a toshiba authorized service center and is fixed by getting the updated BIOS updated to 1.60, but after update BIOS, none of my USB ports work.

    When I connect a USB device, a warning from yellow pop up comes up unrecognized USB device. The same USB device works fine on other computers/laptops. I searched online for a solution and found on a lot of people have the same problem, but did not find any fix for this error.

    It will be useful, if someone has a solution for this error.

    Hey Buddy,

    Is there yellow exclamation marks in Device Manager next to USB ports or they appear correctly?

    If you notice a yellow exclamation you must remove the USB port and restart the computer. All USB ports are installed automatically, you do not need an additional driver.

    I hope that it helps :)

  • El Capitan USB port does not worked well under Yosemite.

    Running a VMWARE image of the Linux kernel using a Sentinel of SafeNet USB license dongle canned.
    Has worked perfectly under Yosemite unfortunately too long to go back.

    The USB port does not work with other USB devices?

    I suspect an incompatibility with the EC and the sine of dongle USB EL strengthened using third kexts. They must be signed, and so a softer update for the dongle is probably necessary. view/8 / #h1

  • Satellite A110-260 - USB ports do not work

    I have a Satilite A110-260 of my brother.
    The problem is that the USB Ports do not work :-(

    They go into the hardware Manager, but I can't install it.
    I have download the hardware installation of the Toshiba homepage but... :-(

    Can you help me?

    Sincerely of John

    PS Sorry for my English ^^

    Can you please tell us what OS are you trying to install?
    SP1 or SP2?

    Please after the installation of the OS, the first thing you need is install driver Chipset.
    Did you install the right one?

  • M40-265 - 2 of 3 USB ports does not work

    Hi all

    Since yesterday, I have my Toshiba Satellite M40-265.

    My problem is 2/3 ports USB does not work.
    I've tried different USB devices such as memory stick, mouse usb and usb printer plugin.
    Just plug the device into the left USB port, if they will be recognised by windows xp home.

    Any ideas what's wrong with my laptop?



    Hi Gerold,

    It looks like a hardware problem with your USB port. Visually check the ports that do not work and you should see a central plastic ankle against which should be four strips of copper fitting. Make sure that none of the tapes is twisted or damaged, it is quite common for one or several of them have been accidentally bent out of position or ankle Central plastic must be broken.

    Kind regards

  • A 'Powered USB Port' does not work on Mac Mini

    I have an external POWERED USB multiport block. When I plug the Superdrive into a Port powered on the unit, which of course is connected to my Mac Mini (2012) the Superdrive not even she acts as if it is connected and will not accept a disc. All ports are USB 3.0. I'm so uncertain that the Superdrive will work on any USB port other than the one on the Mac itself. Any advice? I El Capitan installed, but it has worked that way before the upgrade.

    This specific USB 3 hub? Not all work with the Mini

    Hub USB 3.0, attached to a Mac Mini does not work

    Re: Is there a USB 3.0 Hub that really works with the Mac Mini?

  • USB port does not work

    The model of my laptop is HP Pavilion 2235dx g4. I use windows7 32-bit. It has 3 usb ports. It contains a usb port, it is just side & two others contain he left aside. In this way the usb port on the right side works fine but two other usb ports on the left side does not work.

    What can I do for this?

    Help me...


    Download and install the AMD Chipset drivers and reboot.

    You want the first file on the Web page.  To install the smbus and usb 3 controllers.

    If you need graphics driver, AMD Beta driver should work for you...

  • My usb port does not work. Device Manager says he has a "code 10".

    My dad recently bought a laptop on ebay. It's a HP Omnibook 900 with a 4 GB HD. The previous owner had improved from the original from Windows 98 to XP with SP3.

    It has a USB port in the back & it does not work!

    In fact it is not even appear in the Device Manager! I need to select 'Show hidden devices' to see same the USB hub root. The USB port has a yellow warning icon. In properties, it indicates the port is enabled but does not work because of a "Code 10".

    What the devil is a "code 10" & how in the heck to solve this problem, so that the USB works?

    The port is powered. When I connect devices usb load they turn on & load, but, of course, are not displayed on the computer. My best theory is that the port can be usb 1.0 but the software is intended for usb 2.0 and what could be the cause of the problem. That's just guessing on my part because I do not know with certainty if the usb is 1.0 or 2.0.

    It is especialy boring being the only external devices can I plug a CD player (unwritten) & a floppy drive. It would make my life much more pleasant if I could run software, backup & file transfer, etc. with a usb drive instead! It could even than the laptop quite useful to be worth the bucks thirties, my father paid for it!

    Help, please. Thank you.

    Hi SnarFoo,


    The Code 10 error code is generated when Device Manager it has not enough information or error that has spread upward through the device drivers is not recognised by the Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

    See the article and check if that helps.

    Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

    Method 2

    If the previous step fails, then remove and reinstall all USB controllers on the computer and check if that helps.

    To remove and reinstall all USB controllers, follow these steps:

    (a) click Start, click run, type sysdm.cpl in the Open box, and then click OK.

    (b) click on the hardware tab.

    (c) click the Device Manager button.

    (d) expand Bus USB controllers.

    (e) right click on each device under the Bus USB controllers node and then click Uninstall to remove them one at a time.

    (f) restart the computer and reinstall the USB controllers.

    (g) connect the removable USB storage device and perform a test to ensure that the problem is solved.

    Advanced troubleshooting tips for General USB for Windows XP problems

  • Lenovo G505 3.0 usb ports does not work with Win7


    I bought Lenovo g505 and installed Win7 Ultimate SP1.

    The left, two USB 3.0 ports do not work.

    I could not find the drivers for it.

    Help, please.

Maybe you are looking for

  • iMessage Notifications stopped working

    iMessage Notifications (badge, banner, and sound) ceased to work on iPhone 6 (IOS 9.3.2) but works on iPad Pro 9.7 "(IOS 9.3.1) time using the same Apple ID."   It is a new and started last week.  The only change to our Apple devices is an older iPad

  • Scientific Linux 7.2 on P510 - no audio for headphones?

    It's weird, the OS seems to know that there is a (analog) front headphone port and a rear line output port and can detect my headphones plugged either. It shows analog out as a device to spread to and shows audio of, say, VLC go. I can put it out by

  • M1217nfw - How to scan with the page feed

    I'm tired of scan one page at a time. Is is possible to scan multiple pages from the feeder to scan? I.m on an operating system Windows 8 using the application "scan to" (don't know what is the name of apps or version. TIA

  • I am trying to connect the windows media player 11 for my playstation 3

    I get this message "multimedia file sharing is currently disabled, either because the sharing service is not running or your firewall settings have changed. To restart sharing, you must confirm your sharing settings. "I checked all the settings I can

  • no possible PXE boot via

    Hello When I connect my computer Thinclient he cannot start by PXE. The customer does not receive the IP from the DHCP server settings. But: 1. when I connect the computer Thinclient to a consumer, pass a connect that consumer switch to my PowerConne