Satellite L650-14F maximum and minimum temperature on idle

Similar Questions

• Satellite L650-14F - lines and streaks appear on the screen

  I have a toshiba Satellite L650-14F PSK1LE, bought from a reseller of Romania last week and I have big problems with the video, I guess.
  The scree Somethime closes and appears a few scratches on the screen and I can't use any command.
  The blocking of the laptop. The only thing I can do is to close the laptop and re-open.
  The display driver is installed. What is the problem?

  PS: Sorry for my language and we hope you understand

  Hello

  There are some common steps that should be made on the one hand;
  -test new graphics driver
  -updated the BIOS to the latest version
  -recover the laptop to factory settings

  If the lines are still visible, you must connect an external display.
  If the lines would be visible also on the external monitor, the graphics card can be affected.

  In this case, the part needs to be replaced.
  But this is a job for a technician in ASP.

• maximum and minimum temperature

  Hello, I have read several posts on how to fix my problem, but unfortunately I have a problem with my VI. I want the maximum and minimum, this temperature on the front panel. I don't know if I have 2 while loops or only 1. The problem in the current VI is, when you run it, it will stay inside the while loop. If the minimum and maximum temperature will always present the same value. Could someone tell me what I need to change to allow the work of VI. Thanks for the help.

  Get rid of the loop internal so that comparison is done whenever a new number is generated.

  There are some additional things, that you can do to clean up the code, but which is essential.

• Satellite L650-14F - maximum temperature of the CPU

  Hello guys and sorry for my language.

  Can you tell me what is the optimum temperature for this laptop and what is the maximum temperature?
  Thank you

  Hello

  The CPU temperature is based on a large number of factors and also depending on the CPU model.

  Why is it so important to you?

  If you start Toshiba PC Health Monitor, you can check the temperature. It shows a graph of reading.

• Satellite L650-14F - it is possible to install Windows XP

  Hello and sorry for my language.

  It is possible to install Windows XP on this laptop?
  I have the Satellite L650-14F and I want to install XP 64. but the problem is, with the drivers. are they compatible?

  Help, please
  Thank you

  Yes, you can install Win xp on this laptop, but you will need to use the drivers for Win XP 64-bit.

  European driver Toshiba page provides accurate drivers for 32it version, so you have to collect drivers 64-bit with your own hands...

  But to be honest; I do not recommend using Win XP 64 bit... either you choose 32 bit or Win 7 64 bit.

  Win XP 64 bit was not so popular as the 32-bit version and most of the applications and the software is compatible with the 32-bit version.

• View the maximum and minimum values on the waveform

  Hi, I have a table of waveform and want to display the values of maximum and minimum of the graph with the arrow. I tried to change with the property node, but I still haven't expected output. Could someone can help on this?

  Attached to the vi.

  I ran your VI and it seems to work, but it is difficult to report on its work for several reasons:

  1. the default annotation is black, which is difficult to see on black background graphic. Change the color of the annotation or change the color of the graph.

  2. scale there was not settled in auto-scaling, so I had to go to access my data, which makes it also difficult to locate annotations

  3 If you are using auto scale on the y-axis, the annotations will be always difficult to see because they will be outside the limits of the graphic scale car, I would recommend manually set the scales or by using the offset property label of the sliders to make the label in the view visible

  In addition, each time you add two new annotations to the curve, is this desired? If this is not the case, use a constant of cluster of annotation and a cable which, in your package names, then build a table with the poles of two annotation.

  Hope this helps,

  SoC

• How to find the maximum and minimum of a waveform between cursors

  Hello!

  Does anyone know an easy way to find the maximum and minimum of a waveform between two sliders?

  Kind regards

  Andreas

  Hi Andreas,

  attached, you get an example of it in MeasurementStudio.

• inverted property knots Maximum and Minimum

  I found something interesting in Maximum data properties: scale and range: Minimum data in BT 8.0.1.  I've been looking around in a fairly complex application that I stand by, but did not write to see if the strange behavior of the client is to see intermittently because of our software or something in the material and found the following:

  * There are some digital controls that must have a max and min acceptable value for the user to enter that varies according to the type of USE tested.  The max and min values are in a database and are pulled in the application by reading a TestStand FileGlobal table which was populated by a SQL query.  The table has other things like label and units as well.  The min value is the #2 element in the array and the max value is the #3 element in the table.

  * During the initialization of the user interface, the max and min values are applied to the controls using a property node that sets the data: Maximum of the scale in question #2 in the table and range: Minimum data to the question #3 in the table.  The Action range: maximum and minimum are wired to the constant 1.  * The sentence preceding is NOT a typing error, Max and Min are really wired backwards! **.

  * The code never passes through this again during its execution initialization code, but digital controls are updated by the user as required.

  This configuration should result in erronious behavior as it would have been fixed now, but in reality, it seems that the values entered into the control will behave as expected.  That is larger than the maximum values are forced up and values less than the planned min are forced to the min value.  I was able to replicate that in a .vi simplified by creating a reference to the control and providing the reference to the property node.  The reference node and property are within a structure of the diagram disable.  I have activate the node property once when I load the so digital vi 'inherits' the behavior of max and min.  I then turn off the structure and digital behaves actually force too high for as many values and low values for the smallest number and leaving the values in the Middle alone even if the max and min values are REVERSED on the property node.

  I know it's a complicated mess, but it's the application.  Can someone tell me if it is some sort of bug that could cause instability in the value if it was used as a set for something point OR has put some smarts in the properties of telemetry data which in effect say ' I know you particularly those wire either way, I will use them as you will not as you say. "?

  Here is a picture of my Simulator.

  Thanks for the help!

  Tony

  LaVIEW will sort the entries fo you so that you get a valid range.

  

• Get the maximum and minimum of a LinearAxis value

  Hello
  
  If I set maximum and minimum of a LinearAxis Nan values, Flex determines that a minimum and maximum value that welcomes all data are displayed in the chart. Is it possible I can get two Flex-determined values?
  
  Thank you very much!
  Terry

  Hello

  If I set maximum and minimum of a LinearAxis Nan values, Flex determines that a minimum and maximum value that welcomes all data are displayed in the chart. Is it possible I can get two Flex-determined values?

  Thank you very much!
  Terry

• Satellite L650-14F - model graphics card

  Can you please tell me, what exactly is the Ati video version for this laptop? I bought a laptop 4-5 months ago and just now realized that on this site, model was HD 5145 but mine is HD4500.

  Thank you and sorry for my language

  Hey,.

  Satellite L650 is generally equipped with a different graphics card. Some models have only integrated Intel graphics card.

  In any case, according to the technical specification of L650-14F it s equipped with the graphics card ATI HD5145 and I can t find out more on the official website of Toshiba.

  If your laptop must have the mentioned graphics card and should be included in the display driver and Device Manager.
  Can you confirm this?

• Satellite L650 Wireless disconnects and connection cannot be retrieved

  Hello everyone,

  I have a connectivity problem with my 3 year old Satellite L650, Windows 7...

  I have a LAN wireless in my house, so that my laptop will automatically connect at startup, without any problem.
  After some time (it can be minutes or hours) it loses signal and disconnects.

  This isn't a real problem, because the router is quite far from here, with walls between which can reduce the signal, so no surprises.
  But I can't reconnect later: connection status icon stops working.

  I mean it shows the image corresponding to "available wifi connections" or "connected but no internet access, but or by clicking on the icon or move the cursor of the mouse on it gives no output... it is responseless, and I can't connect to my wifi or any other wireless network.

  I tried to do it from the control panel - network and sharing Center, but the story is the same, the two "set up a new connection or network" and "connect to a network" is not responding when you click on it.
  The only way to connect is to restart the pc.

  How can I solve this?

  Any suggestion is appreciated,
  Thank you!

  > The only way to connect is to restart the pc.
  In case this question is repeated once again, try to refresh and renew the IP address.

  Go to the console (in the type of search CMD)
  Now use the command: ipconfig / renew

  After this attempt to connect to the Wlan again.

  In which case it would not be useful, I recommend you to change the settings of the router.
  I mean that you need to reset the router. Then, you need to test with different types of protection Wlan Wlan connectivity and other standard Wlan (802 11 B G or N)

  Test also the laptop with open WiFi. I mean, you must disable the encryption settings of the router. But this is only for testing purposes.
  The WiFi network must always be secure.

• Satellite L650/1MC - WiFi and LAN connection keep dropping out

  In the last two weeks, that my wifi connection dropped regularly - only a reboot solves the problem. Because it became so frequent (and boring) I returned with an ethernet cable, which worked OK for a few days, but tthat hen started making the same thing: no internet connection.

  I must emphasize that my other active wifi (android and android phone Tablet) kit continue to connect to internet via wifi etc, even when the connection of the laptop has fallen. This leads me to suspect that the problem is mobile partner no router etc. relates. The laptop is rarely used on battery, so I do not have the power as a problem management.

  I have a Satellite L650/1MC running W7 64-bit. I made no changes to my system recently which may give rise to this problem - everything works perfectly until a few weeks before.

  I checked for updated firmware updated on my router in the case where it is the question - it's not.

  Any suggestions to fix this annoying would be welcome!

  > I checked for updated firmware updated on my router in the case where it is the question - it's not.

  Have you tried to reboot the router?
  Since the two connections (LAN and WLan) stops falling, I think that the router is the problem.
  OK, two other android devices seems to work properly but the fact is that router shares automatically and possibly IP addresses, the IP address cannot be assigned correctly.

  However, you can check the WLan and LAN TCP/IP protocol settings.
  Uninstall the TCP/IP v6 and use only the v4 TCP/IP for LAN and WLan.

  Also ensure that your security programs (firewall & anti-virus software) don't affect the internet connection.

• Re: Unable to get the Satellite L650 for system and inaccessible boot repair

  Computer laptop satellite L650 ~ Windows 7.

  I have problems with the laptop being very slow to start for several months until he was able to start. It took to PC World and they said I had a virus and they had reinstalled the software back to the HDD factory settings. Worked well for a few weeks as falied to start. Restored from Windows recovery option by pressing F8 at startup upward. Worked fine for a few weeks until last week. Repeat the process and works very well.

  Monday, I installed Adobe Photoshop and Tuesday night cell phone has been slow to start up again, so uninstalled Photoshop. Stop it installed some updates of Windows. Last night, when I walk it came with a messgae saying doing xxxxx of the registry changes, and then could not start. Now when I press F8 and select "Repair your computer" Windows starts to load files and then get to the System Recovery Options ~ Select UK keyboard and press next and then I get a window saying: "you must login to access the System Recovery Options. If you havingtrouble connect, contact your administrator for the computer for assistance. Click OK to restart the computer. »

  I did not have this on reinstalls previous and I can't get around it. Help!

  Hello

  In the past, I got several laptop computers several times and this option is still available. Please check follow document - http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm - Toshiba and you will see that this option is available.

  If you have created a Windows login password you must use it, otherwise leave it blank and just press OK. Don t change same keyboard layout just click on next.

  Please let us know if you've had success with it. E later can discuss how do for faster laptop to start.

• Satellite L650-14F - system does not have WiFi

  Hi all

  I've seen a few topics about this, but I still can't solve my problems. I have brand new Toshiba Satellite L650 14th but I can't seem to use my WiFi.

  The problem is that the system does not recognize, even in the Device Manager there is nothing. I downloaded the driver from the toshiba site, but when I run it nothing happens. I also tried the BIOS update and install the package of added value, but still nothing. Also, someone mentioned editing tool of Network Device ID registry settings, I downloaded that too, but when I run also nothing happens. I did a lot of research and could not find the solution or the driver work.
  Furthermore, I have windows 7 64 bit.

  Any ideas? I really need wifi, my started classes two weeks ago and no internet at home, I can't do anything useful. Thank you.

  Hey Buddy,

  If the system doesn't recognize the WLAN card, it seems to be disabled.

  You should check the key combination FN + F8 which can enable/disable the WLAN connection.
  In addition on some laptops you can toggle the wireless LAN in the BIOS.

  Check this box!

• Satellite L650-19W - FN and ReelTime button do not work

  Im having problems with the function key. Since he can't work easily does not alter changes such as the brightness of the screen, screen etc. Other Toshiba software do not either as ReelTime.

  I think that I may have to reinstall the Toshiba Utilities, but since it is pre-installed im do not know how to do this or fix the problem.

  Any help appreciated.

  It is for the Satellite L650-19W

  Hey Buddy,

  The FN keys are associated with Toshiba Value added Package, and Flash Cards Support utility. These two tools can be downloaded from the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  TOSHIBA ReelTime is also available on the same page, so you can reinstall all these tools they don t work anymore. After reinstalling, everything should be working again :)