Satellite L650-16w: BIOS 2.40 fan does not start standby mode after

I have the toshiba Satellite L650-16w
the version of the bios is 2.40

I have a problem: when turning on the pc, the fan speed is still 90%, whatever the pc, and if the computer goes into sleep mode the fan stops and does not restart and I got the message: 'problem with the cooling system, turn to pc immediately '.

I had this problem also when I got the 2.2 bios, when I upgraded to 2.40 for a few weeks, everything was normal and now the problem again.

You set the default BIOS?
Make sure in the BIOS, press F9 and then save the changes by pressing F10.

Tags: Toshiba

Similar Questions

  • Satellite A300D (PSAKCE) - BIOS is damaged and does not start

    I formatted computer after when I put update computer BIOS is frozen and it does not work now. File is true where I download from Toshiba Web site.
    I searched Web of Toshiba sites there was not any producere for recovery of the BIOS for the damged BIOS file. Many start-up models with some keys to the BIOS update but mine is not starting any screen only empty key.

    -Can I do it myself? Is there a procedure for Satellite A300D-17F (psakce)? I don't want to wait for the rear service it 6 months before I bought it.
    -If I send to the service, it is under warranty? I don't know any time service can be a problem. They say problem user but I reformatted the PC after I started the update program and they can not understant that sometimes.

    Thank you...

    Hello!

    In this case, you need help from the ASP. You can do anything and it is possible that the ASP BIOS reset.

    On the Toshiba site, you can search an ASP:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

    Good bye

  • Satellite L505 - 10 M - fan does not start

    I have a problem with my Satellite L505 - 10 M.

    Suddenly the fan does not start over and because of this, the laptop get quickly overheated and stops. I installed Windows 7 top me, quite some time ago, and this time it was 2 weeks ago while it just happened this evening. I have not installed anything new and nor I did something special with him, he just does not start fan more.

    I checked this forum, cannot find anything either, searched and could not find any problems with Linux and the fan, but not Windows (it does not start at the start of the bios either).

    If anyone has a thought, a similar experience or a solution, it would be really useful

    Greetings,
    JanPieterz

    Hey Buddy,

    You have installed Windows 7 Microsoft disc or Toshiba Recovery disk?

    Well, if the fan doesn't start anymore, you can t a lot and I think that the fan needs to be replaced.
    What you can do is load default settings in the BIOS (press F9 key in the configuration of the BIOS) and save settings. Also clean your laptop using a jet of compressed air, maybe the fan will be blocked by the dust.

    If he doesn t it work s time to contact a technician for laptop. If your laptop is under warranty, the repair will be free. :)

  • Problems with Satellite A300-1 b 0 cooling: fan does not stop

    Hello users,.

    I m new on Linux and Ubuntu, I installed ubuntu 8.10 last week;
    All things are ok, ok start menu because I have XP, network ethernet connection and wireless, updates ok, ok packages!
    just one thing that make me "' it's my laptop fan, I explain:
    He turned on since I have connection ubuntu and it will be off only when that I disconnect "shutt down" my laptop, so it never stops until the

    the use of ubuntu, because with xp there start but if the processor is cold it is stop! and restart and etc...

    So if anyone has an idea, you are WELCOME!

    My laptop configuration:

    Satellite TOSHIBA A300-1 b 0
    Processor: core 2 duo T8100 2 .1GHz of
    RAM: 3 GB
    SATA hard drive
    Marvell Yukon 88E8040T Ethernet
    Intel wireless

    and I have the patched with the latest bios of the toshiba site
    Date of the bios 07 2008 v3.7 blistering

    > The use of Ubuntu, because with XP there start but if the processor is cold it is stop! and restart and etc...
    If I understand correctly using the Win XP the fan does not always with some breaks. Is this good?

    This isn't a problem but a friend feature.
    As you know the GPU creates a lot of heat.

    This is why it is important that the fan is way on and to cool the GPU or CPU if the temperature reached and some point.
    I put t know what temperature must be reached, but it cannot be too high due to overheating problems.

    Second graphics driver Toshiba control the performance of GPU and the dissipation of the heat too. If the temperature rises to a critical level (applications executing heavy performance) the diver decreases performance to ensure that the heat dissipation would come down.

    But this happens only if the cooling module will not be able to cool the internal temperature.

  • Satellite Pro 6100: error message - cooling fan does not work

    Hello
    I have a SP6100 and it keeps giving me an error message about the cooling fan does not. Then he tells me to stop immediately and runs very slowly. The fan come on, but after three or four short bursts it stops and the message appears.
    Is it a mechanical problem with the fan? I took out the radiator and the fan, and it was clean and not sticky.
    What is a system problem? The BIOS has recently been updated.
    Should I just invest in a new cooling unit and if so where would I get one?
    Any help would be greatly appreciated!
    Thank you.

    Hello

    I recommend to contact the ASP (certified partner) because it can test your device and can do a diagnostic test.
    You can be sure that the laptop will be repaired correctly 100%.

  • Satellite M30-604 freezes and the fan does not work after replacing

    Satellite SM30-604. Laptop has left the mat from one day to the next and overheated! Fan won't spin and laptop start only occasionally. Thinking that the fan was fault I replaced the fan but even this new fan doesn't spin. The heat sink is totally clean - dust free inside the fins at all. The laptop is only 2 years.

    Cooling using forced (by sticking a nozzle of aspiration to the output of the cooling fan!) the laptop starts sometimes as normal until the desktop screen with all of the usual icons and no error message. But then, it does not further - the freezing of the screen, keyboard and mouse.

    Most of the time it does not start at all. When it does not start, the blue LED lights up but there is no hard disk activity or LCD at all - even the wifi LED lights even.

    Really grateful if someone knows what's going on. You are not sure if it is the main processor that is defective?

    Thanks in advance.

    Charlie

    Hello, Charlie

    As you know on this path is not easy to give an accurate diagnosis, but according to your assignment, I guess there is a complex problem and unit must be properly verified. I also think that there must be a problem with the electronics.

    It is really possible that the motherboard needs to be replaced but, as I already said, it is not possible to say something specific about your problem. Try contacting Asp and you will see what they say.

    Good bye

  • Satellite L100 - cooling fan does not start up more

    Hello

    On my L100 laptop cooling fan doesn't seem to work! It does not start up more and after awhile the laptop shuts down as it is too hot. What can we do?

    See you soon
    Mark

    Hi Mark,

    The fan lights normally the POST process before loading the BIOS. Your laptop will continue to boot normally, I presume that your fan control electronics is still viable, otherwise the MESSAGE would fail. So, it seems likely that the problem is with the fan itself. I suggest you check that the fan will run in fact and it missed upward (try to blow strongly in grids).

    If you laptop is still under warranty, then you must contact an ASP to get the fan replaced.

    Kind regards

  • Satellite Pro 4200 overheating because the fan does not work

    I have a satellite Pro 4200 and it keeps overheating because the fan does not work I went in and everything seems ok but then I power it upward but the fan does not work someone can help? all cables are connected the fan run at all.

    Hello

    And how to help her in this situation? If you are sure that it cooling fan doesn t work 100% needs to be replaced.
    By the way: did you clean the unit and remove the dust?

  • Satellite 1800-400 does not start, or crashes after upgrading RAM

    I have the original configuration of RAM for the S1800-400 with 120 MB. I bought a 256 MB RAM with the following description: EXT256-3069/JR, MEM 256 MB RA Toshiba Satellite PRO 4600 series C650, PIII-7500/750/800 #PA3069U (I think the brand is Transcend).

    When I put this slot in the machine, keeping the original and start the computer, it does not start, either on the initial screen of freezing before downloading anything either or that goes to the screen where you can start it in safe mode, but then it does not start.

    I removed the new RAM and it works well again.

    What can be the problem:

    (1) is this new RAM is not compatible with the computer? Based on the selections of the internet service provider, it should be (it's a Portuguese company with their own memory configuration options).

    (2) the computer can work with the original 120Mo and the new 256 MB, or should it be both the same size/brand?

    (3) is there any other problem that I don't have?

    TKS

    Hi Ricardo

    I agree with feliks.
    The module is not compatible and not taken in charge can be responsible for your problem.
    The best way is to use the Toshiba recommended of the memory modules.

  • IdeaPad Y560p - fan does not start

    Hello people:

    I recently sent my knees lenovo repair due to a problem with the screen, but it is only the installation on the problem I have now. During the repair the motherboard has been replaced, since then, the fan does not seem to start then I suffered a little stop withdrawals on overheating. Please say if there is a way to configure the fan manually or... all I have to do.

    Thanks in advance.

    It has been plugged in, and somehow it works now even if I don't. And thanked all the you the mysterious man, really thanks!

  • Update the BIOS Alienware x 51 does not start

    After the BIOS level and rebooted the system, now it seems changed the configuration of startup and 10 Windows does not start.

    I checked the boot options and saw that one selected is now Legacy of start and it seems that Windows 10 works with UEFI.

    Should what boot option I set by default in the BIOS so that window 10 restarts automatically?

    Any help would be apreciated.

    Hello

    Boot option should be UEFI. Disable secure boot, and then on the Advanced tab > Integrated devices: change SATA AHCI mode.

    If the problem persists, press F9 to return to the default settings.

    Let me know how it goes!

  • Satellite T130-11u with Intel CPU Q300 does not start

    Hello

    I installed a Q300 240 G in my T130 LU.
    It does not start.

    I tried to use the restore disks, everything went well.
    But it's boot after that... it's LAN check while the boot device is set to Q300.

    I tried with a Windows disc.
    It says that the disk is locked and I need to unlock it. (Messages are in French).

    I forgot something?

    Concerning

    Jean-Luc

    Automatic response...

    I managed to get to start.

    I had to put:
    "Exectute-disable bit capability" to [Disabled]
    "Control" mode SATA [compatibility]

    After that, I managed to install the system and start (most important) it.

    Once the system was working, I have reset these entries to the normal configuration without any adverse effect.

    Concerning

    Jean-Luc

  • My MacBook does not start and fires after the Apple logo. I received this error via FirstAid detail in disk utility.

    Hi Apple/community,

    I need a help.

    What it means? Operation failed! My MacBook Pro does not start. It cuts after the loading screen. What will happen?

    Any help will be greatly appreciated. Thank you!

    Well, it seems that your MacBook Pro hard drive has failed and cannot be repaired by disk utility.

    Try to reboot into single user mode: How to start your Mac in single user mode or verbose--Apple Support

    If it works, try to repair the disk with this command:

    fsck -fy

    (http://osxdaily.com/2013/08/07/how-to-repair-a-mac-disk-with-fsck-from-single-us UH-mode /)

  • MacBook Pro does not start safe mode or recovery mode without start up

    I use my MacBook Pro almost daily for several months now, and all of a sudden I stopped and start it up to a kernel panic (so it seems) who never lets me start normally, safe mode is a nothing helps. Recovery mode does not start, and when I try to use an external drive usb in the selection of drive it will appear. I don't know what to do more and I'm stuck. I'm not able to get in all the menus, so all I have is these pictures of panic before it restarts. Post picture soon submit iPhone photo.

  • Dell Dimension does not start in Vista after upgrade

    A friend had a Dell Dimension E521 that won't start - has the missing file system\hal.dll.

    As there was nothing on this computer, he needed, I rebuilt it install a new copy of Windows XP, used the upgrade disc closed for upgrade to Vista and ensured everything in its original package has been installed. Let him install the Windows updates at night and in the morning, after a reboot it indicated that there is an update available. I've updated that and restarted and he said there are only four more updates that memory on the video card. I've updated those, but now it does not start at the top.

    I'm going through the boot process, but as soon as it is the screen black with the Microsoft Corporation and the (green?) bar he starts moving forward a very small amount, and then restarts. It comes up with the selection of Windows startup screen and I tried the secure boot and last good Configuration known without result.

    I tried the original XP disc to do a repair, but this doesn't seem to work with Vista?

    How can I recover a work computer or do I have to reinstall again?

    Thanks for any help, that all the world can offer.

    If you have installed Windows Vista good the first time that the hard drive should be fine however I would suggest running the Dell diagnostics just to be safe. To do this follow the instructions on page 405 of this document and perform extensive tests.

    http://philipyip.files.WordPress.com/2013/02/Windows-reinstallation-guide-02-02-2013.PDF

    What video card you have? Have you tried to remove the video card and running using the onboard video? Have you installed Service Pack 1 before the system drivers?

Maybe you are looking for