Satellite L650-1EQ - black screen and overheating problems

Similar Questions

• After logging on my Satellite Pro only black screen and the cursor are visible

  I have a windows vista pro (PSAASE-00G004GR) satellite after turn on and typing the password for windows vista, the screen goes black but I see that the cursor moves & because it seems that the hard drive also works in th background, but I can't see anything except the mouse cursor , I tried to boor with other options (LAST WORK safe MODE KNOWN FEATURES... etc) but it's still the same only black screen and the cursor...

  I do not prefer the product cause of my data recovery on this subject, any ideas?
  thnx

  Hello

  You have the Satellite Pro A100 PSAAS hmm if you want to save your personal data, I recommend to remove the portable computer HARD drive and try connecting it to another computer via an external USB HDD controller. These cases of 2.5 HARD disk are not expensive and you can buy it in every store of the computer.

  Then you could try to recover the laptop delivered together with the Toshiba Recovery CD.
  But wait; have you tried to connect the laptop to the external display?
  Check it!
  Maybe you could see something on the second screen.

  I think that this procedure could be useful to clarify what s wrong.
  To me this question looks like a small little dysfunction of the FL inverter.
  In this case the installation of the new operating system will help you not to solve this problem.

  But who knows the verification is necessary to find what could be wrong.

  Good luck and bye ;)

• Satellite Pro L450D black screen and will not respond to any keys

  Hello

  My niece has used his Toshiba L450D for almost a year now and he really liked it, who was until last month. She turned on her laptop and when she presses the button of the mouse, the button cracked and he fell into the laptop.

  Now my brother contacted Toshiba and I was told because it is under warranty it might return for repair because it was a common fault. Then he he packed in loads of air bubbles and a box to make sure it was safe.

  A few weeks later he came back repaired but we were all shocked that the laptop was put in a very loose box and you could hear this rattling noise. When we turned on the battery was flat and we had a new boot menu.

  As she installed it Windows 7 laptop would boot directly into Windows 7, but now after the repair of the laptop shows a menu black screen with as follows:

  + Windows 7 +.
  + Recover Windows to Factory Settings [active EMS] +.

  So we started in Windows and everything went well, but now after 5 or 10 or even 20 minutes, laptop displays a black screen and will not respond to keys or mouse movement. There is nothing on the screen its just black.

  I started in SafeMode (which was more difficult with the new menu) and it does the same thing. I even managed to do a virus scan quick who took 3-4 minutes and was clean.

  I would like some advice on what my niece is very angry, and it's difficult to explain what is happening to a child in the primary school.

  Any help would be grateful.

  Hello

  Have you tried the option of HARD drive recovery?

  If this is not the case, try to set the notebook back to factory settings using HARD drive recovery.
  Turn on the device, press F12, choose repair my computer, then select Toshiba HDD recovery.

  I hope it will work!

• Satellite A200-1CR - black screen and no boot

  Model:
  Toshiba Satellite A200-1CR

  Question:
  By pressing the power button to power on the computer for a full boot, the power LED lights up but still black screen (not even of lighting). The logo led 'Satellite' in the lower left corner of the chassis remains off while the HARD drive has made a unique quick snap; DVD activity led (the device) always remains on even without any CD inserted, by pressing the eject button do nothing (status bar is locked) and no sounds of activity.
  No logo screen of boot (show stays), not of beeps dark and wide, no DVD or HARD disk activity, keyboard seems does not (all combinations that should light up an led, capslock, numlock, etc, does nothing), the fan works.

  I have already (without success) tried:
  -Unlock the tray, insert the rescue CD and power on
  -Remove the main battery and power on with AC adapter only
  -Insert a bootable USB stick/external HARD drive

  The computer worked as expected the day before and there has not been any kind of shock. Described is the situation I faced when I turned on the next time (only 24 hours later).

  What could be wrong?
  Thank you.

  > By pressing the power button to power on the computer for a full boot, the power led turns on but screen stays black

  Well, looks like hardware problem; Maybe the memory problem or something serious with the mother or the CPU. It of really difficult to say what could cause this.
  You can try to check the RAM modules.
  Trying to start using a maybe only module, it is useful in the case otherwise I fear, you will need assistance from technicians Toshiba ASP m

• Satellite C660 powers, black screen and switches off the power

  Hello world.

  I have a C660 - 22v.Everything worked very well. An hour later, then to use the laptop again, it works, and he turned on as normal in 2 clicks, then more nothing. Just a black screen, not yet turned on, then after 5 to 15 seconds, the fan accelerates for a second or 2, then the laptop turns off.

  Tried with the batteryout & just the charger pluged, just the battery, hold the power button, all sorts of ways, but it only of the switches off the power.

  I think that the hard drive has failed. Any help would be welcome as its out of warranty (16 months).

  A big thank you in advance, Neil.

  In my opinion it has nothing to do with the hard drive. I assume that there is a problem of electronic power supply. I have a similar problem with my A300 and at the moment I put t know what to do.
  Repair is probably quite expensive so I m thinking about selling on eBay as being faulty.

  Problem is that we cannot do much. What should do? You can dismount, take a look inside and put the new.

  Either it works or not. I'm afraid that your problem is for the service and it must be checked by the guys from the services of m.

• Satellite L300D-13s - black screen and nothing appears

  Hi, I have Toshiba Satellite L300D-13 s (pslc8e-02p013en).

  I turned off my laptop as usual and when trying to turn it back on yesterday, I have NO screen. I can here it whirring and all my lights are on, my battery is showing green (paying), but all I have is a black screen, no markers, imprecateurs, whatever it is?
  Have I somehow turned off the screen?

  I was in battery saving mode if it has nothing to do with it at all?

  PLEASE HELP - I DON'T KNOW WHAT TO TRY

  Thank you

  Hey,.

  Normally the battery saving mode (stand-by) has nothing to it. On my Satellite L300, it works correctly and I often use this mode.

  In any case, it would be interesting to know if you can see an image on an external monitor. The internal monitor FL inverter is may be defective and so it does not show an image... Who knows? ?:|

• Satellite Pro C660 - black screen and a cursor flashing during startup

  When my laptop start, after it shows the press f2 or f12 and then from windows, it goes to a black screen with the cursor blink.

  The lights are on at the front, but there is no activity on the hard disk, such as the indicator light does not blink.

  Need help. Thank you.

  I think that your HARD drive is dead.
  You need to replace the HARD drive with a new 2.5 SATA HDD.
  Replace the HARD drive and install the OS by using Toshiba recovery disc.
  I hope you ve created one in the past

• Toshiba Satellite A215-A4757 black screen and unable to initialize

  Received the black screen after trying to download the update of the BIOS; has been logged in as administrator, but received the error 'need to be logged in as an administrator. Could not go further. Process had not begun restore point then minimized and tried to validate the connection as an administrator. Locked screen and got a black screen with errors about bad driver. Doesn't seem to be valid. In any case, I liquidated - power off. Does not power on f11 or any other key - cannot start. Keyboard seems dead. seeing lights to drive DVD could perhaps start with the startup disk. However, do not have (not too smart). Is there a way to get a system of information-based boot disk? I had a previous assignment but did not because months ago. Thanks for any help/suggestions.

  Perhaps your message to: http://forums.toshiba.com/?

• Satellite Pro 6100: blue screen after overheating problem

  My laptop overheats a year ago and since then I can only use it for about an hour at a time. First sign, it's going to blue screen, it's the hard drive starts clicking and about 5 minutes later, he dies.
  Let it cool down for a few hours, then it is well again. It is not the disc hard as I tested it in another laptop.

  Any ideas?
  I desperately need to work again, it has been the best laptop I've ever owned, and I hate the idea of having to buy a new one with a touchpad.

  Hello

  Generally, the laptop overheats because the cooling module may not work correctly.
  I guess that the blue screen appears because of the overheating.
  In this case, I would recommend checking the cooling fans. Fans cannot work properly because of the dust and debris.
  The use of the vacuum cleaner is the best way to clean the fans.
  But be careful.

  In addition, the square around the laptop must be free. It is important that fans can take a breath.

• Satellite A210 - 11 p - gos black screen and HARD drive does not

  Hello

  My Satellite A210 - 11 p suddenly goes to a black screen and the hard drive stops working. It is always under tension and if I want to restart I have to unplug the unit and remove the battery.

  I thought it was overheating and checked the time and they were really high in the 1980s. I took the fan and cleaned (very dusty) and the basic form of thermal paste. Temperatures plummeted now immediately but I still have the same problem, I updated the graphics driver and watched the temp on GPU (which is fine) but the problem is still happening. I used a number of programs to check for errors on the hard drive and no reported problems. I reloaded Windows 7 but still no joy.
  The problem seems to occur at any time and is not due to the execution of a given program, even just browsing with firefox

  Not too sure what to do and any advice would be welcome.

  Hey Buddy,

  > I reloaded Windows 7 but still no joy.
  Have you ever tried with Toshiba Recovery disk operating system?

  The Toshiba recovery disc there is an image of the settings from the factory with all the drivers and tools. If you install Windows on this disk, you factory back.

  That would mean if you have the same problem after the installation of recovery it s really bad hardware working because you have pretested settings of Toshiba. In this case an authorized service provider can help you make an accurate diagnosis what part is affected.

• Re: Satellite L675-10 t black screen after disassembly problem

  Hi all

  I recently had some problems with my L675-10T overheating, even when I was with a big fan of cooling for the games.

  I realized that the problem resulted from blocked exhaust and dust and it is why, after reading and watching the many tutorials, I opened my laptop computer successfully and all cleaned up.

  The temperature dropped to 20 c and I was happy.

  The next night, however, took my laptop and headed for the living room, and it will stop.
  Black screen and nothing passed. So I ran to the internet and found this solution, it worked btw.

  1. turn off your computer
  2. unplug all wires (including energy)
  3. disconnect the battery from the bottom of the computer.
  4 re - connect the power cable. (the battery should not be in the computer)
  5. turn power on. The screen works. Choose start windows normally. (if you get this screen)

  The thing is, the same thing happened to me this morning as well.
  Twice in 2 days and im a little worried I did something wrong during Assembly of the laptop or something. Any ideas? Or do I keep accountant with the above solution?
  Looks like a mess of power upwards of sorts.

  Thank you in advance.

  Hello

  I assume that this question has not happened before you have disassembled the laptop. Right?
  To be honest this similar issue happened to me to. The portable light not (black screen) after I'm entered in the mode 'sleep'. However, this happened only once

  It s hard to tell why this happened to you it of not impossible that you have damaged something for disassembled the procedure.

  However, the fact is that the warranty is not valid more because you opened the laptop. That is why any approach (especially parts replacement) to solve this problem would cost money.
  So ultimately it s your decision: a technician visit to downtown to see the pieces of equipment or keep your stay with the workaround mentioned above.

• Satellite - black screen and can't restart with the recovery disk

  I have a black screen and can not restart with the restore disc but it seems to be.

  I find this odd, I can't ask Toshiba direct on my problem, but I have to wait for one nature in the heart of my problem or give me a helping hand

  Hey,.

  This means that you can see anything on the screen of the laptop or only if you try to start with the recovery disk?
  You can start Windows or access the BIOS?
  You must post a few more details, otherwise we can t help you :(

  Furthermore, Toshiba is not your first contact, you should ask an authorized service provider. They can help you too! :)

• Satellite L300 has only a black screen and will not load.

  Mobile hit child around keys shortcut if, Esc, cap locks, fn etc loading upward on the web, top computer laptop has black screen and then tried to load up.
  See screen for a moment and then is become black and now the laptop starts but the screen is black and nothing else happens.

  Can someone help

  Thank you
  Tony.

  Hello

  You mean that you are not able to access the BIOS?
  Have you tried to use the FN + F5 key combination to switch to view different devices? Select this check box. Maybe the output display has been switched to external monitor?  :|

  If nothing will not help to remove the battery and disconnect the portable AC.
  Wait for about 1 hour then reconnect both sides and try to turn on the laptop.

• Satellite L350 - 170 Vista black screen and strong continuous beeps

  Since an update of windows who has not completed, the pc does not start.
  After the first page, it goes to a black screen and beeps very. I don't have a recovery disk when I bought the pc.
  Have tried with recovery Vista downloaded, holding the key F8, it happens where you can choose the repair of launch, it launches the application, but then after a few seconds it stops and starts beeping again.
  Is there a recovery cd (download) I can get for this PC and how to fix this?
  Thank you

  What happens if you try to start Windows in safe mode and delete update (s)...

  > Is there a recovery cd (download) I can get for this PC and how to fix this?

  There is no free download link, you can buy a [Recovery disk | https://backupmedia.toshiba.eu/landing.aspx] Toshiba you can also do a new install of Windows since Windows copy disk.

• Satego X 200-21 L - black screen and 3 beeps at startup

  Hello

  I have a problem when I turn on my computer (Satego X 200-21 L). I had a black screen and 3 don't beeps no boot up BIOS not nothing what do I do?

  Everyone everyone please help!

  Hello

  Looks like a hardware malfunction on your laptop, because normally these beep codes mean that it s something wrong with the hardware.

  Is that what you have installed extra RAM? If Yes, remove it and try to boot with original RAM only. Also try to reset the RAM in the slot.
  It work?

  In the worst cases, you must go to an authorized service provider. Technicians can check the laptop and determine the cause of this problem.