Satellite L650 does not detect wifi networks

Similar Questions

• Aspire ES1 does not detect wifi networks

  After a frustration of a few hours, I turn on this forum to help you, please. Ours is not a unique problem, but further discussions on the same issue did not provide enough help.

  Until this morning, the Aspire had only undetected (and connected to) our home wifi network, but has detected nearby wifi networks. Now, he finds none. Our other four devices continue to connect as usual.

  We looked at the list of devices under "network adapters" and in this list, according to the Acer support page, we should have two cards among others here: Ethernet card for wired and wireless network adapter. It is not present.

  We do not know how they came to be "lost" or how we can restore them. Any help would be appreciated and please keep in mind we are reasonably computer, but not technicians.

  Or should I just send the wretched machine back?

  In this case, it is recommended to run the system restore to restore your system to a point in time when your wireless network worked very well. To learn how to perform the system restore, you can check the link below:
  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  Hope this will help you.

• Satellite sometimes does not detect the wireless network

  Hello

  My laptop Satellite sometimes does not detect wireless networks and the only thing I can do is to restart my computer, is there a solution for this?

  Hello

  Well, in most cases the WLan driver update could solve this problem.
  In addition its advised to check the firmware of the might of Wlan router must be updated as well.
  I recommend also to reset the settings of the WLan router and set it up again

  Another idea; Disable the save option in Win 7 the power supply WLan management

  Welcome them

• After a clean install of Windows Vista, Intel Wifi card is installed and activated, but does not detect the network.

  Wireless card not working after a clean install of Windows Vista

  I did a clean install of Windows Vista Home Premium on my HP Pavilion of 32 bits. I've completely updated Windows via Service Pack 2. Given that the clean install, my wireless card, Intel (r) Wireless WiFi Link 4965AGN, was not able to detect all the networks. The Wifi card is listed under NICs as being installed and activated. the hardware on my laptop Wifi switch is set on "on" and the light is blue, indicating that the card is working.

  I can connect to the internet if I connect physically my computer to the modem with an ethernet cable wireless, so the modem isn't the problem. Other computers can connect to the wireless modem, so my Wifi modem functionality is not the problem. The problem with my computer.

  I tried to uninstall the Intel driver and reboot my computer with the generic driver. Install the driver generic, but my wireless card has not always worked. I then ran an update of windows, nothing helps.

  I tried to install the "Intel® PRO /? Wireless and WiFi Link"drivers for Windows Vista (32-bit 13.1.1.1 the latest version and the previous version 12.4.4.5 32-bit) for the Intel® Wireless WiFi Link 4965AGN directly from the Intel Web site at http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Wireless+Networking&ProductLine=Intel%C2%AE+WiFi+Products&ProductProduct=Intel%C2%AE+Wireless+WiFi+Link+4965AGN. The map didn't always work with a driver.

  In addition to the pilots, I also downloaded a tool of diagnosis of Intel (Intel® PROSet /?) Utility of WiFi wireless connection for Windows Vista 32 -? Bit). Said diagnostic tool the WiFi card is not installed or enabled, however, Device Manager maintains that he is also installed and active.

  Is there a problem that causes Device Manager to say that all is well with the card, but does not map to realize that they diminish the radio signals? Everything's fine, diagnostic, it just does not detect networks around him. Help, please.

  Hello

  The on/off switch actually works?

  Since it is an internal adapter to ensure it is enabled in the settings of configuration/F2 (BIOS/CMOS) often like you
  Start - so look at the screen.

  Have you tried the computer on other WiFi networks? You had a WiFi type problem before the
  Re-install of Vista?

  ---------------------------------------------------------------------------------------------------------------------

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Reading TCP does not detect the network closed conncetion error (66)

  Hi dear all,

  Instead of LAN I use WIFI to connect PC and mobile. Read all communications and write operations are performing ok. But the only problem I am facing is that once I disconnect the network from a mobile phone connection my labview TCP read operation does not detect it and only timesout at the specified interval. Although for Bluetooth connection network if I disconnect mobile then BT read detects it as network conncetion closed in error by peer (66).

  Can someone help me on this.

  Thank you & best regards

  Zdzislaw qureshi

  Hi Zdzislaw,

  The behavior you're seeing is expected for TCP as the device will timeout while it is looking for the connection close the connection.  This Wikipedia article explains how TCP protocol works in relation to a handshaking procedure four lanes running in order to close a TCP connection.  I hope this helps!

  Kim

• Laptop does not detect WiFi or USB

  My laptop was running on Windows 8.1 and I decided that I wanted to go back to Windows 7. I installed Windows 7 Ultimate, but now my laptop does not detect my Wi - Fi. I thought I should just update the driver associated with a wifi adapter but it does not detect my Flash drive either. I tried to reinstall Windows 7 and Windows 8.1 but I still have the same issues. Help?
  
  Quick notes:
  Computer: HP DV7
  Operating system: Windows 7 Ultimate

  Using HP recovery for your computer media, he would return to a factory State... including all partitions of the plant, operating system, drivers and HP software. The HP recovery media should solve all problems, except those that are from the real hardware.

  Otherwise, you can download the drivers from the page that was provided and install them. Once again, just after the "Hardware ID" string for any unknown devices.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• HP 15-Ay007la: Wi - Fi does not detect wifi access points. HP AY007LA downgraded to Windows 7.

  Hi again once, I went down my laptop for windows 7. And one, I installed the drivers Wi - Fi, Web page of drivers and works, but when I reboot, the wifi no longer works, I tried to download, uninistalling, install again too many times and do not work. Map Wi - Fi are correctly installed and windows doesn't detect not all bad. But do not work, displays a red one does not detect a Wi - Fi connection. Map of the Internet: bcm43142

  Have you tried pressing the F12 key to enable the wireless?

  The one with the airplane on the key icon.

  It would be the only suggestion I can offer.

  If the bluetooth driver was not installed, try the previous version...

  This package contains the Broadcom Bluetooth driver and software for models supported that are running a supported operating system. Broadcom Bluetooth 4.0 driver is required to enable the Broadcom Bluetooth 4.0 devices and is compatible with Broadcom Bluetooth 3.0 and earlier versions.

  FTP://ftp.HP.com/pub/SoftPaq/sp71001-71500/sp71440.exe

• Unable to connect to the Internet error "Windows does not detect a network card installed properly"

  Internet does not connect and connection was well 5 hours ago. Message states: "Windows did not detect a network card installed properly" How should I proceed? Connection is on the laptop, but also other devices. Problem is only with the office.

  Any help is appreciated

  OT: Internet connection

  Hello

  You did changes to the computer before the show?

  I suggest you try the steps from the following link:

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• VM does not detect the network drivers

  I am in need of VMWare and have installed a Windows 7 VM but it does not detect the drivers for the network.  What drivers I need to give it, it of the network drivers for the host machine or is this something specific to VMWare?

  Thank you

  Simon

  Settings edit-> Options tab, you can change the guest operating system type. Check if Windows 7 is available. If this is not the case, try WIndows 2008 or vista.

  Marcelo Soares

  VMWare Certified Professional 310/410

  Technical Support Engineer

  Globant Argentina

  Review the allocation of points for "useful" or "right" answers.

• HP 15-ac042TU: do not detect WiFi networks

  I have a HP 15-ac042TU (portable) (Core i3
  4th gen / 4 GB/1 TB / Free DOS)
  (M9U96PA) problem with detecting WiFi its foundation not to any network I tried to work with several drivers but is not currently working Broadcom 802.11 network adapter is installed tell me what driver should I install to run

  Hello:

  The only suggestion I can offer would be to try this driver if you have not already done so.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827&swItemId=ob_153525_1&swEnvOid=4192#

• Satellite L650 does not start

  Have had problems over several weeks with my laptop does not start up. See: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=65765

  Worked fine until last night for a week or two. Booted up ok, but gadgets has not appeared and no Yahoo Messenger that starts automatically.
  I couldn't click on all items on the desktop or the bar at the bottom of the screen. Stop and asked if I wanted to force closing down of applications that were still running. I said yes.

  Laptop turns off and then when I rebooted it came with the screen Toshiba startup and startup of Windows and the Windows logo but then received the message that Windows could not start and I wanted to start normally or repair. I ran repair, but the AI get after Windows loading files is the cursor on a black screen.

  I tried to turn off and then I get the message when start saying that WIndows did not start successfully and I want to repair or start normally?

  If I click on the repair, it comes up saying Windows is loading files and then I just get the cursor on a black screen. The hard drive light does not illuminate and nothing seems to happen (I used to open a new window).

  I tried pressing F8 at startup upward and I select the Windows repair option, but that said just from Windows and then I get the cursor on the screen black as above. I have also tried changing the boot sequence so that it boots from CD/DVD first and insert the recovery disks, but once again nothing.

  I'm now getting really tired after you have everything reinstalled at least 4 times in the last two weeks.

  I do
  (a) buy a new copy of Windows 7 and the gap of the partition recovery that she clearly doesn't seem to work;
  (b) throw the whole 18 months old laptop and buy a different brand or
  (c) is it possible that it's the hard drive which is a failure and that I should buy a new hard drive and Windows 7 DVD?

  Any help is appreciated because it drives me crazy!

  Nigel

  > I ran repair, but all THE get after Windows loading files is the cursor on a black screen.

  > but that said just from Windows and then I get the cursor on the screen black as above. I have also tried changing the boot sequence so that it boots from CD/DVD first and insert the recovery disks, but once again nothing.

  Looks like the HARD drive is faulty.
  You can test the HARD drive with freeware like Drive Fitness Test or similar tool, but car aptitude test would help you to create a bootable diskette that would test the HARD drive.

  I think that the HARD drive needs to be replaced if errors would be detected according to the news from the other thread, you have created a recovery disc, so it shouldn't be a big problem to reinstall the operating system once more once the HARD drive has been replaced.

• 5.1 ESXi does not detect my network cards during installation

  Hi I am trying to install esxi 5.1, but during the installation, I get an error not detected no physical network adapter and then abandons the instillation. I know that my network card is not detected until I have install the driver, but I don't know how I can install the dryers to exsi, during the installation of windows.
  

  When I try to search the compatibility guide I get no results.

  
  

  My specs are:
  

  MB: FOXCONN P9657AA
  BIOS VERSION: Not sure
  CPU: Intel (r) Core (TM) 2 CPU
  6420 @ 2.13 GHz
  2.13 GHz, 8 GB of RAM
  Memory: (DDR2 240Pins) (CORSAIR)
  VGA: NVIDIA GeForce 8500GT NX85T256H PCI Express X 16
  PSU: Not sure
  HARD DRIVE: 1 MAXTOR IDE HARD DRIVE 250 GB
  CD/DVD: LITE-ON DVDRW LH-20A1P SCSI CdROM Device
  OS: N/A
  Network cards: OnBoard LAN

  LAN Chipset - Marvell 88E8056

  Max LAN - 10/100/1000Mbps speed

  and a second NIC not sure of the brand, I pulled it on an old PC that I have laying around.

  Thank you

  network Marvell cards is not supported according to the guide of comptaibility

• Satellite L650 does not start sometimes the Power button

  Sometimes when I press the button works / starting the fan of laptop and the laptop does not start.
  However when I press once again lights up.
  This does not depend on how long you keep holding the power button so that it starts.
  Anyone facing this problem.

  Thank you.

  What exactly do you mean by does not start?
  Is this means that the laptop has been closed or has been set to standby or hibernation mode?

  Are you able to see the Toshiba start screen when you switch on the device?
  If fans hang on this means that the laptop has been put under tension, and then you the OS should start to initialize.

  PS: usually it s no matter how long the power button could be pressed. Briefly press (1 sec) should turn on the laptop.
  But if you do not want to power OFF using the Notepad works / stop, then you will need to tap more long time 4 sec long but it is not recommended that this reset should be made only if the OS hang

• Fedora 17 does not detect my network wireless Satellite 11 850 L.

  Hello
  I just installed Fedora 17 in my laptop and my wifi can not be detected. It is a REALTEK RTL8723AC.

  Does anyone know what driver to install and how?, does anyone know another way to make it work?
  Thank you for your attention.

  Kind regards.

  As you probably know Toshiba doesn't support Linux, then maybe you should post this question on some Fedora forum. Here, you have more chance to answer or discuss this subject with experts from Fedora.

• Re: Satellite C660 - 29G does not detect wireless networks

  Hello.

  I own a SATELLITE C660 - 29 G PSC1LE, bought in Spain.

  Once shaped my development pc, I installed Windosws 7 64-bit.

  As I lost the DVD attached to the purchase of the laptop, I have downloaded all the drivers for my model based on the Toshiba site

  I installed all the drivers and the thing is that the wireless card is most recognized. I can´t see WiFi available.

  I connect to the laptop with a cable to get access to the internet and it works properly.

  Could you please help me?
  Thank you.

  You can first test what is the status of the WLAN card in Device Manager?
  Wireless network adapter installed and registered correctly?

  If yes do not forget the wireless network card is enabled.
  Please check and post comments.