Satellite L650 - operating system does not start - how to set to factory settings?

Similar Questions

• Satellite L650-14F - system does not have WiFi

  Hi all

  I've seen a few topics about this, but I still can't solve my problems. I have brand new Toshiba Satellite L650 14th but I can't seem to use my WiFi.

  The problem is that the system does not recognize, even in the Device Manager there is nothing. I downloaded the driver from the toshiba site, but when I run it nothing happens. I also tried the BIOS update and install the package of added value, but still nothing. Also, someone mentioned editing tool of Network Device ID registry settings, I downloaded that too, but when I run also nothing happens. I did a lot of research and could not find the solution or the driver work.
  Furthermore, I have windows 7 64 bit.

  Any ideas? I really need wifi, my started classes two weeks ago and no internet at home, I can't do anything useful. Thank you.

  Hey Buddy,

  If the system doesn't recognize the WLAN card, it seems to be disabled.

  You should check the key combination FN + F8 which can enable/disable the WLAN connection.
  In addition on some laptops you can toggle the wireless LAN in the BIOS.

  Check this box!

• Satellite Pro 6100 system does not start

  Hi people,
  I have the following problem. I used my laptop long enough for thet to deplete battery and the device to go into hibernation. Given the againm battery costs, I tried the system and now it does not start.
  The leds light up fine and stay lit upwards. Just nothing happens, the FN key works. After a minute the fan will start to turn upwards and turns down again. But nothing else.
  After some time, by pressing the power button for a few seconds seems to start the machine, but it stops immediately after 30 seconds. Even if doing a memtest.

  anyboy has any idea what could cause this. I tried to remove the hard disk and start it does not affect what anyone, as does move the RAM module in the other slot. Also remove the CD/RW drive does not affect it. Remove the battery and start also give the same result.

  Hello

  Sorry, but tells you don't know is not enough for me.
  If you start Notepad, you see something on the screen?
  A Toshiba start screen appear?

  You suggested that the FN key works. Have you checked it in windows?
  AFAIK the FN keys can work only if the operating system has been launched and the drivers have been loaded. So my strange question.

  The whole thing is very strange. If nothing is displayed and the laptop cannot start, so I guess a hardware malfunction. But you know without any trial it s not easy to say what's wrong.

  Try to disconnect the laptop from the sector and remove the battery. Wait several times (30 min - 1 hour) then plug the AC adapter and try to start it.
  If it won't work and you know that other devices are ok such as RAM or HARD drive so I think that the technician must check the machine.

• Operating system does not start

  My OS (XP) has recently frozen in a never-ending cycle of:

  • Re-boot,
  • With flashing white screen white upper-left
  • Option page prompting me to choose "safe mode, network security, normal, finally, etc..".
  • Re-start again.

  M BUT it never restarts.  How to do this?

  -Thank you, ssaucedo

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  What is your Internet browser and version?

  Your system's disks IDE or SATA drives?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

  What do you see (exactly) that you don't think you should see, and when you see it?

  What do not you think that you should see?

  If the system works, what do you think might have changed since the last time it did not work properly?

  If there is a problem starting, XP is configured to automatically try to start again and you can stuck in a loop not being able to go beyond the screen boot options, or none of these startup options you choose will work only.

  Sometimes, when XP has a problem starting or falls down and tries to start again, it will give you a "short" menu of boot options and none of them will appear to be good to get your system going again.  Something like this:

  Safe mode
  Safe mode with networking
  Safe mode with command prompt
  Last good Configuration known (your most recent settings that worked)
  Start Windows normally

  You have tried them all!

  The options are similar to the Advanced Boot Options menu XP, but the only option that you need (disable automatic error system reboot) are not offered, because XP went too far during the boot process and offers a limited number of boot options.

  If this is the case, you must manually call the Options menu advanced boot yourself until you do not see the option:

  Disable the automatic restart in the event of system failure

  When you get the XP Advanced Options correct start menu you want to see, he has options on it like these:

  Safe mode
  Safe mode with networking
  Safe mode with command prompt

  Enable Boot logging
  Enable VGA mode
  Last good Configuration known (your most recent settings that worked)
  Directory Services Restore Mode (Windows domain controllers only)
  Debug mode
  Disable the automatic restart in the event of system failure

  Start Windows normally
  Reset
  Return to OS Choices Menu

  You need to choose in this menu is the option:

  Disable the automatic restart in the event of system failure
  
  Then if XP does not start normally, you will see an error screen with information and clues about the problem and then you can decide what to do next.

  If you do not see the automatic restart on system failure option turn it off, you must reset your system and start typing the key F8 on the keyboard until you see her disable automatic restart on system failure option.

  If you miss the window of opportunity F8, you must try again and start tapping the F8 key with more urgency (earlier and more frequently) until you see disable automatic restart on system failure, and then select.

  You must keep trying the F8 menu until you see disable automatic restart on system failure option, and select it.

  If your system has a Blue Screen of Death (BSOD), we need to know what the screen says:

  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Send for the nose and the Red arrows (3 to 4 lines total).

  Send all * line STOP message since there are clues in the 4 parameters.

  If it looks like there is some kind of name listed in the STOP message file, send this line also.

  Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.

  Answering queries and results report of the disable automatic restart on system failure screen and you can decide what to do next.

• Satellite L650-12 q does not start

  I have a PC laptop toshiba L650Q. Its working well for 1.5years now...
  Few days back, I closed the laptop, it's to tell closed the screen (generally it puts even in mode 'sleep').

  After about 10 minutes when I tried to open & start the computer laptop not simply start :(
  I can see the glow of LED battery & power adapter, but when I press the Start button, simply does not start...
  There is a momentary gleam of the power on button, I hear the fan trying to start & then it subsides in abt 2 seconds & laptop simply does not start...

  I tried the TROUBLESHOOTING steps below but without success

  (1) I removed the battery and tried to boot using the adapter, it forces of start up
  (2) I put the battery for like 1 hour & then tried, it forces of start up

  Please let know us the steps of troubleshooting or indications that that could be the problem and how I can solve it...

  Post edited by: dhiru23

  Try this:

  -Remove the battery and unplug the AC adapter.
  -Press the power button / stop along 30 sec
  -Connect the battery and AC adapter to the laptop
  -Try to turn on the unit.

  If this fails, check the memory modules.
  Remove a module and try to start Notepad using a single module. Run the test for each slot and the module.

• Operating system does not start; F11 gives error.

  HP Pavilion dv7

  0xc000000f error code

  -does not start the o/s

  -not boot to safe mode (or whatever it is)

  -System gives error F11 recovery

  -friend did not restore system cd

  -OS is Windows 7

  I removed the hard drive and slave it to my office (using 2.5 USB cable).  The files are accessible except the \USERS directory is MIA.  If I can see the C: and D: (recovery partition)-

  Can I run the program on my desktop computer to create the recovery CD?  (faster you proceed your order/delivery/arrival)

  Other suggestions?

  Thank you...

  ACETech says:

  p/n: NM295UA #ABA

  Installation media (recovery dvd) was not made by the user.  That's why I asked if I could make running the hard drive from outside the laptop (enslaved at my office).  Thanks for the info, I can't do that.

  Will be there without you say the o/s?  It is not sure that vista or 7 32-bit or 64-bit.

  Looking at his hard drive Windows and a Linux flash player, I don't see his user under the \users Directory directory.  It of funny, just might be blown away...

  It's Windows Vista Home Premium 64-bit with Service Pack 1.

  Here link to the specs page.

  Best regards

  ERICO

• [Solved] pc with xp home edition as the operating system does not start after installation of SP2 via automatic updates

  Hello everyone. After formatting my hard drive I reinstalled windows xp edition sp1 family and then installed the latest version of windows update agent. I have the auto update set to download the updates automatically and notify me when they are ready to be installed. Initially, he found 3 updates that I installed and rebooted. He concluded 58 updates. Again, I've installed and restarted. After that, we found ServicePack 2, I installed as well. But after the reboot, the pc does not start. What I get is the windows xp logo which discoloures after a few seconds and I don't see a bar moving from left to right. I left it like that for 3 hours, but nothing has changed. Also, it does not start in safe mode. I get a screen with red and green vertical lines in this case. Anyone know what's the problem? I'd appreciate any help. Thank you.

  I was finally able to solve this problem. That's what I did. I reinstalled windows xp home and followed the same path (but his definition of the automatic updates notify me before downloading or installing updates) until the automatic updates found in the new service pack 2. This time that I did not choose to download it. Instead I downloaded from here http://www.microsoft.com/en-us/download/details.aspx?id=28 and then started in safe mode and installed. I don't know one that makes the difference but service pack 2 has been successfully installed this time and tha pc was able to start after installation. Before that, I also downloaded and installed the latest versions of 2 drivers through drivermax. I mention this in the case where he has also made a difference. After the service pack 2 installation and restart, automatic updates will be found a few others brought up-to-date, but after installation and reboot, it found no others. I had to visit update windows Internet explore and search for updates it and managed to find other updates and finally SP3.

• Satellite U840W - disc cannot be displayed in disk part operating system does not start

  Yesterday I tried to boot my laptop Toshiba Satellite U840W (PSU5XA-001006) and it came with no bootable device - please reboot

  When I try to view the disc in the part of the disk, it cannot see that the USB key that I use to try to reinstall Win 8. In the setup of windows 8 I can't display the installation discs. I can't run the recovery because I don't have a recovery disk and repair does not work as it says that the disk is locked.

  Don't know what I can do now, would be grateful for all those who had suggestions.

  Of course, there is a problem with the internal HARD drive.
  If it is not listed in the BIOS (BIOS first page) then the HARD drive died and that's why the system cannot be found.

  I guess that in this case, there is only one solution: HARD drive needs to be replaced and the system must be installed again.

• A60-155: operating system does not start.

  I have a TOSHIBA A60-155. When I turn on the laptop it doesn't load the operating system, I have read the manual and apparently it is a self-test failure, I tried selecting all modes start but nothing will work. I have not yet tried any recovery CD the problem started after I pressed the power off because the computer froze. Does anyone have the solution to this problem?

  I would also like to know what the BIOS is and what I need to update? my laptop is around the age of six months.

  Hi Ben,

  First of all, you need to update your BIOS if your laptop is only a few months old.

  Second, the boot sequence for your laptop is a three step process:-

  1. the post OFFICE will verify the functionality of your attached peripheral resources, DVD, disk HARD etc.

  2. the BIOS then load and deal with the allocation of RAM etc and also initialize the functions of the basic system of your laptop.

  3. BIOS bed the Master Boot Record to determine what operating system you have installed will be then load the required system or give you a menu of options which you can choose.

  If you press the ESC key as soon as starts the ignition process, you should see the results of the first two steps (the POST and the initial BIOS load).

  The fact that you see the selection menu with the choice of types of loads (i.e., Safe Mode etc.) suggests that your system is unable to load your operating system from the hard drive. The fact that none of the options work indicates that there is a fundamental problem with your hard drive.

  If you have a bootable CD then I suggest that you try to boot your system from CD (press and hold the F12 key during the first power on sequence and select your CD drive in the list).

  Alternatively you can restore your operating system recovery CD, but it will format your hard drive, which results in the loss of your data.

  HTH

• Lack of operating system does not start, no system recovery rates don't work

  My computer is stuck yesterday. I turned to turn off at the main switch. I know it's bad:)

  When I turned it back on, the Startup Repair automatically came and tried to solve the problem. He did not, but said this:

  "Details of the session:

  System disk = \Device\Harddisk0

  Windows directory = C:\Windows

  AutoChkRun = 0

  Number of Root Causes = 1 "

  then later...

  "Root cause found:

  State the start indicates that the OS booted successfully. »

  I did research for the past two days; Here's what I know: I don't do recovery or backup discs. I made one using these instructions: http://neosmart.net/blog/2008/windows-vista-recovery-disc-download. It did not work, did not help. I tried some command prompts but can't seem to find someone with my exact situation and won't make things worse.

  None of the other options work, System Restore, etc.

  The command for a system scan prompts said: "Windows Resource Protection could not perform the requested operation."

  Can you help me? I have the impression that the operating system is it despite what the command prompt said, especially after some of the messages I've read.

  Data recovery, if required:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• WebCache does not start - how to set logging - could not start and run...

  Can someone tell me how to set more detailed logging webcache / opmnctl? The log file, the error does not show anything. I guess I need to change the webcache.xml of the file but do not know the values that I should enter.
  
  This seems to be a common problem. To be exact, I am doing an installation of Oracle Grid Control and this error occurs.
  I worked on it for the last two days and seems to hit a dead end.
  
  I got the solution from changing permissions webcachectl with the same results. I also change the owner to root and tried. Same mistake.
  root @ bin # ls-l
  3508 total
  -rwx - 1 oracle oinstall 16802 Jun 27 11:27 webcachectl
  -rwx - 1 oracle oinstall 3562649 Jun 27 11:27 webcached
  -rwx - 1 oracle oinstall 4651 Sep 2003 29 webcache_setuser.sh
  
  root@hostname bin #./webcache_setuser.sh setroot oracle
  The ORACLE_HOME environment variable is not set.
  Set ORACLE_HOME and redemarrez./webcache_setuser.sh
  root@hostname bin # export ORACLE_HOME = / home/oracle/OracleHomes/oms10g
  root@hostname bin #./webcache_setuser.sh setroot oracle
  
  setRoot task completed successfully.
  
  root @ bin # ls-l
  3508 total
  -rwxr-x---1 oracle oinstall 16802 Jun 27 11:27 webcachectl
  -rwsr-x - 1 root oinstall 3562649 Jun 27 11:27 webcached
  -rwx - 1 oracle oinstall 4651 Sep 2003 29 webcache_setuser.sh
  root @ bin #.
  
  INITIAL ERROR
  
  IAS-component Oracle@hostname webcache$ / home/oracle/OracleHomes/oms10g/opmn/bin/opmnctl startproc = WebCache
  opmnctl: from opmn managed the process...
  ================================================================================
  opmn id = hostname:6201
  0 out of 2 process started.
  
  IAS instance-id = EnterpriseManager0.hostname
  ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
  IAS-component/process-type/process-set:
  WebCache/WebCache/WebCache
  
  Error
  -> Process (pid = 19983)
  Cannot start a process managed after the attempt limit maximum
  Journal:
  / Home/Oracle/OracleHomes/oms10g/opmn/logs/WEBCACHE ~ WebCache ~ 1
  
  IAS-component/process-type/process-set:
  WebCache/WebCacheAdmin/WebCacheAdmin
  
  Error
  -> Process (pid = 19976)
  Cannot start a process managed after the attempt limit maximum
  Journal:
  / Home/Oracle/OracleHomes/oms10g/opmn/logs/WEBCACHE ~ WebCacheAdmin ~ 1
  
  Webcache Oracle@hostname $
  
  Contents of/home/oracle/OracleHomes/oms10g/opmn/logs/WebCache ~ WebCache ~ 1
  Oracle Application Server 10g (10.1.2) Web cache
  Copyright (c) 1999, 2005, Oracle. All rights reserved.
  
  06/09/28 08:34:49 launch
  Oracle Application Server 10g (10.1.2) Web cache
  Copyright (c) 1999, 2005, Oracle. All rights reserved.
  06/09/28 08:34:51 launch
  
  Thanks in advance
  SG

  It is not taken in charge supported. Please check the certification metrix in the metalink.

• Operating system does not start on Equium L350 - 10L

  Hi all.
  My laptop has suddenly stopped working. When I turn it on I have a screen that says "Startup Repair" and under "Windows cannot repair this computer automatically.

  I tried to put it through a scan but nothing helped.

  I'm completely lost as to what it can be. I'm not sure if it was dropped or anything!

  Any help would be greatly appreciated.

  You know what; If you n t have some important files on your HARD drive install OS using the recovery discs. After doing this you will have own preinstalled OS and everything works again.

  If you have more photos and other important stuff saved on the HARD drive, you can remove the HARD drive and connect it to the PC and others as external one. You must have access to all your data and you can make a copy. After that put the HARD drive in your laptop and reinstall the OS.

• New HP Pavilion laptop 15-e026AX (Windows 8 operating system) do not start

  I am extremely irritated that the new HP Pavilion 15 - e026AX laptop I bought flipkart.com online does not start. Whenever I turn on the machine it is automatically goes to the BACK gives me an option of opening Documents HP, or who allows as the operating system does not start. If the OS has not been installed? I have not received any manual with the machine either! Help, please!

  Sincerely

  CGI

  Hey, CGI,.

  Do you know if the unit is brand new, factory sealed, or if it is a unit used/given to nine? Since it was not purchased directly from HP, it is difficult to know what had been done to the unit before he did in your hands.

  Since it came to you in this condition, please contact the seller and see if they can replace or help out you.

• "Your operating system does not support the 64-bit version of Silverlight" when you try to install Silverlight on your computer.

  Original title: Silverlight problem

  OK, so something was wrong when I was watching Netflix and I had to uninstall Silverlight. When I tried to reinstall it, it says "your operating system does not support the 64-bit version of Silverlight". I have a 64-bit version of Vista and I use Chrome. Can anyone help? I don't want to lose to Netflix.

  OK, so something was wrong when I was watching Netflix and I had to uninstall Silverlight. When I tried to reinstall it, it says "your operating system does not support the 64-bit version of Silverlight". I have a 64-bit version of Vista and I use Chrome. Can anyone help? I don't want to lose to Netflix.

  Clean installation of silverlight and reinstall...

  How to clean a facility damaged Silverlight and then reinstall Silverlight

  http://support.Microsoft.com/kb/2608523

• My mini ipad 4 has no battery completely not discharged, called to the charger, but the system does not start. What should do?  Already a time connected to the charger, but the system does not start. I have iPad 3 months and never suffered no damage.

  My mini ipad 4 has no battery completely not discharged, called to the charger, but the system does not start. What should do? Already a time connected to the charger, but the system does not start. I have iPad 3 months and never suffered no damage.

  When connected to the charger make a forced reboot: hold the home and sleep buttons, wait for the Apple logo, release the buttons. May take a few tries.