Satellite L650 starts with error 0xc00000e9

Similar Questions

• My Satellite Pro L450D starts with error 0xc00000e9

  Hello

  whenever I tried to start my Satellite PRO L450d-12 x it shows me,
  STATUS: 0XC00000E9
  Info: An unexpected i/o error has occurred.

  Have idea how to fix?
  I'd much appreciate help.

  Hello

  Can you please tell us what exactly happens when you start your laptop?

  There is obviously a problem in common between the hardware connected to the motherboard. It may be the HARD drive. Of course, it is not easy to say what exactly is the problem.

  If there is no problem for you to install OS again once I recommend you set the BIOS to default settings and install original OS that you got with your laptop. It's simple and the best method to check the operation of the equipment with the factory settings.

  If this will not help, I assume that there is a serious hardware problem.

• Satellite U940 starts with error message after BIOS update

  Hello, I have apologizie for my English, I know that's not the best...

  I made a mistake very stupit, and now I can't use my new U940 satellite - 103.
  I updated the BIOS from version 1.2 to version 1.3.

  Unfortunately, I did not have any recovery media (I'm stupid, yes!).
  When I turn on the ultrabook, he said:
  "Your PC need to be repaired.
  error 0 x 0000001
  Does anyone know what I can do, please?
  THX

  Hmm you see a Toshiba screen when starting?
  Are you abele to access the BIOS?

  If this isn't the case, I guess something was wrong during the update and you will need to request the service in your country to fix.

• Re: My Satellite A500 starts with error message

  My computer laptop satellite A500, after this startup and windows open, a message from the Update Manager "error #-5, I wonder what that might be.
  My operating system is Windows 7, 32-bit 4 GB of Ram.

  Can anyone give me the solution for this error?

  Hi jun07,.

  Who Update Manager you mean exactly?
  I think that a screenshot would be very useful in this case.

  If you mean the update of Windows, you must check for Windows updates again and check if the updates will be installed.

• Satellite A110 starts with error message "PXE".

  I saw something on the internet that I usually look on the web address www.datemule.com I think, and I think without doing something new my laptop started to reboot and then pops up this message:

  INTEL UNDI, PXE - 2.1 (build 082)
  Copyright (C) 1997-2000 Intel Corporation

  For Realtek RTL8100E/8101E Fast Ethernet Network Adapter v1.02 (060510)
  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit PXE ROM

  INTEL UNDI, PXE - 2.1 (build 082)
  Copyright (C) 1997-2000 Intel Corporation

  For Realtek RTL8100E/8101E Fast Ethernet Network Adapter v1.02 (060510)
  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit PXE ROM

  what it means? Please help me to solve it!
  I look forward to your reply! Thank you!

  At first, I must say it's really strange that something like this happens so suddenly. It seems that your laptop can not find the HARD drive as a boot device.

  Start please your laptop, then press F2 to enter the BIOS settings. Check it please on the first page if the HARD drive is recognized and registered correctly. If Yes check it please boot option in the BIOS and don't forget HARD drive is set as the first boot device.

  Please post some info on the status of the BIOS and the HARD drive.

• My CS will not start with error code 16

  How can I find the serial number CS5.5 under MAC OS X if I want to reinstall it? My CS will not start with error code 16, he says: configuration error.

  Please visit the Doc KB: http://helpx.adobe.com/x-productkb/policy-pricing/configuration-error-cs5.html

• Satellite L650 PXE - E63:error initializing the NIC - error start

  I have a Satellite L650, which is 2 months old.

  The motherboard makes a ticking noise (I think it's what makes noise), and when this noise occurs it causes very slow computer! It has been thus since I got it pretty well.

  Today, the computer makes noise, my itunes music started to jump (it was the only program running) and the computer froze and was told that he could not find windows. When I restart my computer it runs the windows startup repair 7, found nothing wrong, and restarts the computer. When the computer restarts, the screen stays black for a long time... and then it flashes a blue screen (flash is so quick that I have no idea of what he says) and asks if I want to rerun the repair. I choose not to start windows normally... and the screen goes black for a long time, however there is no ticking noise, but it seems that nothing happens.

  If I force a reboot, I get an error message saying along the lines of;

  For Atheros PCIE Ethernet controller... Check the cable connection
  PXE - E63:error initializing the NIC
  PXE - MOF: exit intel PXE ROM
  No device bootable-insert boot disk and press eny key

  Help, please!

  > Today, the computer makes noise, my itunes music started to jump (it was the only program running) and the computer froze and was told that he could not find windows.

  Sounds like the HARD drive failure.
  That would explain the PXE Boot error as well.
  This error occurs if the laptop tries to boot from LAN because other sources bootable couldn t be found.

  In my opinion, you need to replace the HARD drive.
  If the warranty is valid, get in touch with a local ASP from Toshiba and ask the new HARD drive

• Re: Satellite L650-1GZ with LED turn signals

  Hello

  My laptop Satellite L650-1GZ not illuminate. The power supply light is OK. I tried with 2 different Chargers.

  When I press the power button of the laptop before flashing together 1 time every 4 seconds or more, but the laptop does not light.

  I tried with and without battery.

  Thank you very much!

  Hello

  I think it is s hardware problem.
  The question is: as parts is defective?
  In my opinion, you should start with modules of memory RAM.
  Try to power the unit using a module in each slot
  Now that if it can help but it s worth a try.,.

• Satellite L650 of disc error

  My Toshiba Satellite L650 does not start.
  When I turn it on, TOSHIBA is followed by display disk read error, press ctrl + alt + delete to restart.
  I did it and the same thing happens again. So far, only the F2 and F12 works, I tried F8, it gives a continuous beep loud then the same message.

  Can anyone help?
  Any suggestions would be much appreciated!
  Thanks in advance!

  See you soon!

  Hello

  What HARD drive is visible in the BIOS?
  HARD drive is recognized in the BIOS? You will need to check the first page of the BIOS.
  Usually, you should see the HARD drive and the HARD drive name.
  If disk HARD isn t in the list, then probably it of defective and must be replaced.

  Waiting for your comments!

• Defender fails to start with error 0x800106ba after application Vist SP 1

  I used Vista service pack 1 and now advocate does not start with a code of error 0x800106BA. I tried to uninstall it, but has not found how do for anywhere. I also tried to reinstall but the system says it is the first part of Vista. Any ideas?

  I used Vista service pack 1 and now advocate does not start with a code of error 0x800106BA. I tried to uninstall it, but has not found how do for anywhere. I also tried to reinstall but the system says it is the first part of Vista. Any ideas?

  You have already discovered, your AV closed your Defender Windiows because your AV has his own Defender, and having 2 defenders on the same machine will create conflicts.

  List of the AVs that will stop Windows Defender are...

  Microsoft Security Essentials
  Norton
  MacAfee
  AVG

  Canoe uninstall you or reinstall Windows Defender. It is part of the operating system. He lives and dies with the system.

  You do not get 0x800106B error code if you try to open Windows Defender, which is disabled by your AV.
  So, question:
  What did you want to do what it will take to open Windows Defender?

  If you try to enter the startup programs, you can do without going through Windows Defender.

  Start < in="" the="" search="" box,="" type="" msconfig=""> Startup tab > here is the list of startup programs...

  To disable - uncheck the box.
  To activate the checkbox....

  WARNING: Make sure that you know for sure to turn it off. If you are not sure, ask first.

• Search service Windows fails to start with error-2147218174

  Windows search has stopped working for my Outlook emails and other areas of the system, I went into the service panel and tried to start the Windows Search Service.  He was able to start with the error 2147218174.

  My first question: what does this number mean?  This number gives a clue as to the cause?

  I tried SFC, but system files are ok.

  I ran the store search & index, but who could not fix, because the service does not start.

  A discussion for a similar sounding problem, Microsoft asked a user to set a may be corrupt user profile by copying to a new.  But this has not fixed the problem for this user, so I probably shouldn't waste time with this step.

  Windows system event log contains the following entry that could give an additional hint:

  DCOM got error '1053' attempt to start WSearch service with arguments "" to start the server: {9E175B6D-F52A-11D8-B9A5-505054503030}

  Around the time this problem started to happen I upgraded a data disc to a hard drive different and changed the drive letter of this data.  Could he have mistaken the search services with the existing database of index and somehow prevents the service to start?

  By chance I came across a possible solution.  I went to "Indexing" / Advanced Options / rebuild the Index and now the Windows Search Service shows that it is "started".

  I am surprised that I have not read this suggestion on the forums of Windows support in response to questions from the other user has the same problem.

  It will be interesting to see if it works in the long term...

• computer HP Pavilion laptop starts with error message disc 1 failed with code 301

  I have a HP Pavilion laptop dv6 - 6033cl running with Windows 7.  In the last days, it starts with the error message: "Test Drive: 1.

  SMART check failed

  Failure ID: RU3TRQ_5KK6PJ_MFH14J-60BE03

  Product ID: LH597UA #ABA

  HARD DRIVE 1 "

  When the computer is running in normal mode, bodyguard Windows sends messages saying that it detects recommeds and failure of disk 1, I perform the backup.

  This computer is more than 2 years old and is more under warranty.

  Can someone, please.

  Thank you very much

  Your hard drive is dying quickly and must be replaced. If you have not burnt the recovery discs again I'd get burn soon or you will have to order from HP. You will need to boot and install Windows when you put the new drive in.

  Burning discs of recovery HERE

  Example of hard drive HERE

• EBS fails to start with error afpoload

  Hello
  
  All on a sudden our EBS refuses to start with the following error message. We are on 12.0.6 version, and did not any changes recently. As it is an instance of production, we should be reviving a SR tomorrow when getting to work, but just thought of posting here - just in case some of you have been there earlier. Fast ideas will be highly appreciated.
  
  
  ORACLE APP-FND-01564 942 error in afpoload
  
  Cause: afpoload failed due to the ORA-00942: table or view does not exist.
  
  The SQL statement being executed at the time of the error was: select NODE_ID from FND_NODES where SERVER_ID =: asid and was executed from the file & ERRFILE.
  
  
  Concerning

  Hello

  Changes have been made recently?

  Select FND_NODES where SERVER_ID = NODE_ID: asid and was executed from the file & ERRFILE

  You will find FND_NODES table in the database?

  Have you tried running AutoConfig on the node in database/application layer and see if it helps.

  Please check the file application.log for more information about the error. If no error is detected in the newspapers and the above did not help, then please get the FRD file and post the complete error here.

  Thank you
  Hussein

• Re: Satellite L850 - Toshiba system settings utlity starts with error message

  Hello

  I had this problem for months and I'm sick and tired with her...
  Whenever I try to start the configuration utility, I get the following message: Please install Toshiba system driver first.

  I have all the drivers, and they are all to date. I use Windows 8 on my Toshiba Satellite L850 1kt. I also tried on Windows 8.1 and it has the same problem. In addition, it is impossible to uninstall the system configuration utility, it gives me the following message: Setup has intterupted.
  Andrew

  Stand by. According to specification for laptop, your laptop has been offered with Win8 pre-installed 64 bit. When used with the factory settings, everything should be OK.
  > I use Windows 8 on my Toshiba Satellite L850 1kt.
  Do you use original Win8 that you got with your laptop or your own version? Original version is tested and should work properly. Have you changed anything or removed from the system?

  Reinstall if possible original version of the OS (recovery image) and I m sure that everything will be OK.

• Recovery procedure starts with error message - Satellite L10-333

  Two problems really

  One of my CD / DVD player plays up.

  I can't record dvd had / CD on this subject.

  However, I can watch DVD / CD on this subject.

  I tried different brands on CD but does not resolve it.

  So I decided to restore my computer to default to see if that fixes however I get the message

  "RECOVERY".
  MACHINE TROUBLE!
  THIS SOFTWARE IS DESIGNED FOR TOSHIBA PERSONAL COMPUTERS. "

  and it wont let me restore default settings

  Any help much appreciated

  Andrew

  And you use recovery media delivered? Is - the first time you try to use it?