Satellite L650 - strange problem with webcam

Similar Questions

• Satellite A350 - strange problem with hitatchi HTS ATA 320 GB HARD DRIVE

  Recently bought a Toshiba Satellite A350 - still under warranty.

  My problem started with gel/delay of Windows whenever I transferred specific files.
  I found that a lot of my files are the same; It's then that I transfer or open these files - this can take 10 minutes to load crash, then displays a corruption error
  During this phase:
  The hard drive makes a slow repetitive scratching sound
  The laptop hangs for an average of 10 minutes before returning to a usable state - I found more than 15 files and suspect many more that are corrupt.
  I suspect a faulty hard drive, like the check disk crashes and my system hangs whenever I open / transfer of these files.

  I tried to reformat and install the new OS, but always check disk crashes and I lost a lot of important files, because they became unusable.

  Is there something I can do to remedy this
  or
  If the hard disk is defective, Toshiba will replace?

  BTW - I m in Australia.

  Hello

  Exciting announcement, but it will be interesting to know how exactly you do and what kind of data are responsible for this. I want to say I use laptop computers and can not say that some of the data makes my crazy HDD.

  If you really think that there is a problem with the disk HARD nearest Toshiba authorized service provider contact. They will check the functionality of the HARD drive, and if there is a serious hardware problem, you will get a new. Of course for free.

• Satellite P300 - strange problem with num lock keys

  I had a problem with my keyboard lock num. I have a P300D - 131

  By pressing '4' and '8' at the same time, it shows on the screen '4 '.

  By pressing "0" and "6" at the time, tamed, it shows on the screen "0 0".

  This also happens if I touch the very fast numbers. That's why you can't count on the num lock keys! I have this problem since I bought the laptop in July 2008. Now, I found this forum and I hope that really that someone can help me solve this issue!

  Thank you
  HDW

  Hello

  These issues in the past have been resolved with BIOS update. I therefore recommend as a first step of the BIOS update.
  Check the current version on your laptop and the most recent proposed on the Toshiba download page.

  To be honest I don't understand why you waited so long on this subject. Laptop warranty valid and the nearest Toshiba authorized maintainer can help you about this.

• Satellite L670 - strange problems with HDMI connection

  Hello

  I experience problems when you use the hdmi connection:

  My computer: Satellite L670

  Scope: Watch movies on the LCD external (sony bravia) via hdmi

  Computer param: Clone computer - screen plugged - features full power - the screen of the laptop has been set in order to let the computer works normally when closed.

  When you play a movie with the laptop open screen, no problems. I have twice the movie, one on the computer screen and the clone on my external LCD. Perfect.
  But if I close the laptop screen (which would normally have no effect), lagging behind the film on the external display. He stops each 5 seconds for a few seconds and leaves, making it unreadable.

  Did someone had such a problem? Any suggestions?

  Your help will be appreciated.

  If you need to know everything, just ask; (o)

  Thank you.

  When this happens you noticed more often and HARD disk activity flashing LED of the HARD disk on your laptop?

• Satellite A305 - strange problem with power LED

  I have the Toshiba Satellite A305-S6825 and I noticed that when I run the laptop on electric power, the battery light (LED) on the front of the laptop is "illuminated".

  AC power ligtht is the first light on the left; and law who is the witness bright power switch; and in which law is the "LIGHT of the BATTERY. It is the light, I want to talk to.
  I can understand why the light can be WE when I was using the laptop with only the (power) battery in operation. But why the battery led (lit) when I have the laptop plugged into an electrical outlet?

  Is this normal?

  When I turn on the computer, after it's off for a while, and it is plugged into an electrical outlet, I see that battery light is kind of purple color, until the battery reaches 100% charge and then it becomes white.

  When I put the cursor on the bottom right of the screen battery icon, it reads (after full load): full load 100% current power Plan - balanced.

  Hello

  > I have the Toshiba Satellite A305-S6825 and I noticed that when I run the laptop on electric power, the battery light (LED) on the front of the laptop is "illuminated".

  This is nothing unusual. I have another set of Satellite and my battery LED light if the laptop is connected to the power adapter too.
  It changes between the function light orange and blue if the battery is fully charged or not.

  It seems you ve not laptop wholesale experience here is the led and the LED are very effective and don t waste power as a common light bulb.

  So relax and enjoy you machine!

• Satellite L40 - strange problem with battery LED indicator

  Hello

  I have Satellite L40 - 18w and I have a problem. When the battery is low or that he is in charge of the led is orange, but when it is fully charged there is no led indicator. Even if I turn it on, there is no light and if I check the power connection options AC adapter is recognized. Operating system is Windows XP PRO SP2. I tried to find the Toshiba Power Saver, but it seems that he can't stand L40.

  Would it be a hardware or a software problem?
  Thank you in advance for your help!

  I had the same problem.
  Remove and install back the battery.

• Satellite U300 - strange problem with volume control wheel

  I bought a U300 last week and I find that the volume control wheel doesn't move very easily. It seems that you have to push it slightly to adjust the volume, and when you release your finger, the volume goes in the direction you moved to slowly. Everyone knows this?

  In addition, when pressures above the express card slot the housing compresses. This happens on all the U300s?

  I would go back to the store I bought in and ask, but I live quite some distance from him so I thought I'd see if anyone here could help first. All responded very appreciated.

  Thank you.

  Hello

  Looks like the wheel is stuck and something around the wheel blocks the volume wheel. I think the best idea is to return the machine as you said, since it s very unusual described what you´ve.

  You can also send your machine to a service partner chartered for an assessment of health/repair of equipment.
  If you need help to find the one closest to your country, you can use the following link to find some:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Good luck, welcome and good weekend

• Problem with webcam not fixed with Vista SP1 on Portege M700

  The Vista SP1 does nothing to the failure of Vista to recognize the built-in webcam Portege M700.
  The existing forum thread mark this question as a response, despite the link to the document toshiba mentioning the error messages entirely different from those cited by those of us with problems

  I find it strange that the M700 UK wouldn't have a built in webcam; is it really true?

  Hello

  I noticed a problem with webcam in time early Vista release, but it was linked to the Vista OS stroller and was solved by SP1.

  Sorry, but another problem with webcam into the unknown for me and as far as I know internal webcam works fine also on Portege M700.

  As you already suggested the internal webcam is not available on all Portégé M700 series. Toshiba notebooks, any series, are equipped with different hardware specifications and example to the webcam internal, in the light of the webcam and internal microphone are available on some models.

  Maybe no problem with a webcam, but some Portégé M700 does not really have an internal webcam ;)

• I have a strange problem with my RAM supported by installers. When I check the activity monitor, 3 installers are open and they start around 80 MB memory RAM used for about 7 or 10:08 minutes or so.

  I have a strange problem with my RAM supported by installers. When I check the activity monitor, 3 installers are open and they start around 80 MB memory RAM used for about 7 or 8 concerts after 10 minutes. I have to force them to quit, but I don't know what I am closing or why they open in the first place. Applications downloaded on iTunes?

  

  In addition, the Console has opened with the same message several times, but I don't know what that means.

  Any help would be appreciated.

  Hello

  The last is a picture of the Terminal window.

  Just because it lists 'Console' does not mean that it has nothing to do with this application.

  You have not said why or what you're trying to install so I can't help with that.

  You can use the activity monitor to leave their.

  After you select an item, use the X in a type of stop sign icon and confirm force quit.

  

  21:36 Thursday; September 15, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• Problems with WebCam? YouCam allows to test your WebCam

  Software using YouCam to solve your Notesbook WebCam problems

  Problems with your computers webcam portable? You can use the YouCam software to solve problems with your webcam. It was really only a few questions, which can cause problems with webcam. Driver problems, bad video configuration and software issues. YouCam will be able to identify these two problems for you.

  Troubleshooting with YouCam

  
  First you want to make sure that all other applications are closed. Other applications can steal the priority of the YouCam software that could interrupt the troubleshooting. Then open the YouCam software. If there are problems with the WebCam, you will be alerted with an error message here.

   

  "Unable to connect to the video device" error:

  Hope this helps to solve many problems of webcam. Again, this is an informational message that should serve as a reference. If you have gone over these steps and are still problems please create a new thread and include your computer model, operating system, and any other information that would be helpful in resolving the issue.
  
  Thank you!
  Sean S

• strange problem with Ericsson H5321

  Hello

  I have a strange problem with Ericsson H5321 on my X 230. Until a few weeks ago, the card worked perfectly as a modem (at least on Linux, so I guess it would be too much work in Windows). Unfortunately, a few weeks ago disappeared from the network manager modem connection. I checked that all the special device for this files still exist:

  $ because I in/sys/class / * / * {ACM, wdm} * / device/interface; echo-n "${i}: ';" $ Cat {i}; fact
  
  / sys/Class/TTY/ttyACM0/Device/Interface: H5321 gw Broadband Mobile Modem
  
  / sys/Class/TTY/ttyACM1/Device/Interface: H5321 gw Mobile broadband data Modem
  
  / sys/Class/TTY/ttyACM2/Device/Interface: H5321 gw Mobile Broadband GPS Port
  
  / sys/Class/usbmisc/CDC-wdm1/Device/Interface: H5321 gw management of mobile devices to wide band
  
  / sys/Class/usbmisc/CDC-wdm2/Device/Interface: H5321 gw Mobile Broadband USIM Port
  $ lsusb | grep Ericsson
  
  

  .. .and I also checked it works like GPS (at least kind of: it generates data on/dev/ttyACM2 NMEA streams, but cannot get a GPS fix even after 45 minutes with access to an open sky).

  Then I tried to run windows 7 and the card is visible in the "Device Manager", but there is also no possibility to create the GSM connection in the connection menu in the bottom right.

  I tried a new install of Windows 7, I tried to reset the BIOS (even with the removal of the battery backup), but still I can't force them to work again. My BIOS is fully upgraded BTW: the problem appeared during the use of 2.61 and I also tried with recently published 2.62.

  My cell phone is always on the extended warranty, but as modem bought in line with the basic configuration it was only covered by the warranty of 12 months has expired

  Today it came to my mind that, as the modem itself seems a little work (present, responsive GPS device) then maybe it's a SIM card reader that is actually damaged (which would explain a bit why the camera itself is present, but I can't create a connection). Can someone confirm or deny my theory? If it is valid, then I could still replace SIM card reader because it is part of the basic configuration.

  Thanks a lot for your suggestions!

  [Mystery solved: I managed to put the SIM card on a wrong side...;]
  [I hate myself so muuuuch;]
  ([btw: Lenovo could fix their SIM card reader, so there is only one possible way to put a SIM card using his corner of heart: it would have saved me 2 days of stress and an investigation;]) )

• Strange problem with HP OfficeJet 6500 709n

  I have a very strange problem with my printer HP 6500 E709n wireless network.  I have recently upgraded to Windows 8 and everything worked well.  Then, all of a sudden I wasn't able to scan more.  The HP Solution Center says that the printer is disconnected.

  The weird part is that it appears in the section of Control Panel as active and properly connected printer and devices and I can still print to it, but not scan to it. He also says in the network section of the HP solutions center that the printer is connected and ready.  The printer is connected to my wireless network and I also use it with a Mac Mini.  The Mac can print and scan to it.

  No idea why this is happening and how to fix it?  Thank you.

  This problem of not being able to scan only started after upgrade to Windows 8?

  If so, then to solve the problem, you must first uninstall the Windows 7 software and then reinstall the software of Windows 8 long.

  To uninstall the software, follow these steps:

  1 right-click or press on and hold the lower left corner of the screen, then click or type programs and features. A list of installed programs.
  2. click or tap the name of your HP printer, and then click or tap on uninstall.
  3. follow the on-screen instructions to uninstall the software.

  After you have uninstalled it, go ahead and download the full software features for your printer. It can be found on the link below.

  Driver and HP Officejet Full Feature software

  Install this version of the software and try to scan now!

  Let me know if it works for you, good luck!

  -Kyle

• Problem with webcam on Acer Aspire E1-532

  Hello guys,.

  Problem with webcam on Acer Aspire E1-532,

  I have installed new OS on my system and realized that my webcam no longer works, HD webcam, I tried the search for solutions on the net for the 2 last days but cudnt find something specific to the problem.

  I m running Windows 8.1 company on my system, help out me please my friends,.

  Kind regards

  Sushant

  @justin: thanks for your comments,.

  last week I fixed it fortunately, I kept on looking for HD webcam drivers and found a driver called "Realtek HD Audio drivers". I just uninstalled all previous drivers for webcam and audio too, then I installed the HD audio driver and then everything works fine now, indeed, acer crystal webcam is not necessary all, juice install this driver HD and everything works fine... Thank you.

• Strange problems with the database

  Hello

  I just got my Fuze and am very happy with it; However, I am having a very strange problem with the database. I have a 16 GB sdhc card that I use with the "rocket" and there are about 4 songs on the card that will not play and have no information charge tag. Their tags appear in the tag browser (not the in the track information screen) as just an empty rectangle. Under the track information screen, sizes are listed as ~ 4000 mb. The songs will not play and I can not jump in front of one of these songs once they were loaded.

  At first, I suspected some kind of corruption of tag, so I set out that night to track down the problem. I removed the 16 GB card and reset the player. Then, I loaded one of the corrupt in the internal memory of the player. The track has been scanned and played correctly. Then, I removed the track of the internal memory and it loaded on another SDHC card. Yet once, everything worked correctly, so I knew that the card I was using was a kind of system files or physical problem. I returned the original 16 GB sdhc card in the reader and checked that the file was still unplayable, and then I plugged the "rocket" to my computer. I transferred the unplayable file on my computer and compared (with md5sum) to the original file, thinking that if there was the file system or physical corruption the copy of the map would be damaged. However, the files were equivalent.

  To make things even more interesting, I also have problems with the registration of the kind. I have some files tagged Genres such as 'Classic' and 'Rock '. In the list of the genre, I see this:

  C

  CL

  CLA

  CLAS

  Class

  Classic

  Classic

  Classica

  Classic

  Rock

  So, there is corruption on the kind of 'Classic' but not the kind of "Rock". Each of the substrings of 'Classic' contains only a few titles, with most of the other titles listed where they should be. I checked that the tracks are labeled correctly and in exactly the same way as the other tracks that do not have this problem.

  I am at a total loss about what to do, and I'd really appreciate any advice or suggestions. I use the current firmware, 2.03.31a and the songs in question are in Ogg Vorbis format.

  MM

  Thanks for your replies.

  I managed to find what may be the problem. Tracks that received corrupt tags had the names of total path with more than 256 characters. It seems that the driver internal fat32 the rocket uses vomits all over the place when the path name is too long. Before the "rocket", I got an iPod running rockbox tags with the same directory structure that I have on the "rocket", so I don't think that this restriction on the length of the path name is a limitation or requirement of the fat32 file system. Reduce the path corrected the problem with the files being unreadable.

  However, the problem with foires genres the rest. Looking at the files show that corruption, they all have a little information in tags. Most of the information is contained in the hashes I have files that identify them via musicbrainz. The limit on the total number of characters in the tags of the track includes the "rocket" label is not read or use?

  MM

• Strange problem with BT Headset!

  Hello

  I have a very strange problem with BT headset.  My Z3 is model of official unlocked Docomo of SO - 01 G.  I got PlayStation Voxtube 500 BT headset BT version is THE 4.0.  This headset has been used with Nexus 5 (Android 5.1.1) without any problem and the battery last almost a week to stanby with a few minute talk time per day.  However, after not getting Z3 with Android 4.4.4, pairing with Voxtube has no problem.  Then, the battery is discharged within 4-5 hours stanby.  I tested it for 3 or 4 times, it has come down to that there must be something worng with the battery of the headset.

  So, I got with PlayStation representative claim (it is only a few months old).  Surprisingly, representative of PlayStation has all the test suggested no stanby time problem with their phones iPhone 5 or Sumsung Galaxy S5.  Then I took back recharged so its performance is very short wait duration the same as before.  So, I tested it with my iPad Mini 3 and performance return to normal standby time.

  So, it can be concluded for only problem is with the Z3. But once again with the mating with the other headset BT Jabra Tag2, stanby time is within the normal range (4-5 days).  When that happens?  I am very confused. Should I give up on PlayStation?

  Thank you for your time,

  Simply upgrade to 5.0.2 lolipop and hope this will help me on this issue.