Satellite L650 - video but no sound on the TV with an HDMI cable

Similar Questions

• 4540 s: no Signal from my computer to the TV with a HDMI cable

  No Signal from my computer to the TV with an HDMI cable. What can I do? Windows is up to date! My laptop is Hp4540s, Enterprise 64-bit windows 10

  Hi!, attilak:

  Welcome to Forum!

  (1) try, update of the graphics drivers, of... http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5229457&swLangOid=8&swEnvOid=4192

  (2) try to change, by others, the HDMI cable.

• Satellite L650 - no sound on the TV using an HDMI cable

  using a HDMI to connect to the TV picture cable works fine but no sound through the TV, sound out of speakers to computer. How can I configure so sound comes through the TV?

  Hello

  Usually it should automatically work but try it please check the settings in the sound properties > reading.
  Switch off the speakers and turn on the digital audio device (HDMI).

• Pavilion 11 x 360 pc cannot connect to the tv with an hdmi cable

  How to connect my laptop to my HD TV with a HDMI cable? I have tried all of the suggested routes, checked the TV and cable, but still get a blank screen. Are there updates or I need to install drivers?

  rochpellets wrote:

  How to connect my laptop to my HD TV with a HDMI cable? I have tried all of the suggested routes, checked the TV and cable, but still get a blank screen. Are there updates or I need to install drivers?

  Hello

  Exact model name/number, operating system 32 or 64-bit?

  Have you been good Page 24 and 25 of the present user guide for HP Pavilion PC 11 - n001xx x 360.

  Also, try a hard reset before trying.

  It's the latest Intel graphics driver for HP Pavilion 11-n001xx x 360 PC Windows 8.1 (only supported OS).

  Follow the user guide & check again.

  Thank you

• Satellite L650 - 13 M - high sound under the touchpad

  Hello

  When I work with my laptop, I hear a sound of high light (as you may know an insect repellent, just a little louder). It's not very loud, but it can be really annoying. If you listen closely from below, you can see that it comes under the touchpad. Does anyone know what makes this healthy and how I can possibly solve the problem?

  Thank you very much

  Post edited by: wokhog

  Hello

  It is difficult to tell what this sound can be, but I read on similar sounds from the faulty power supply.
  To be honest, I m not a L650 owner but maybe you should get in touch with a local ASP which could check the hardware and could find a reason for this high sound ground.

  Good luck

• Satellite C55D - no sound on the TV using an HDMI cable.

  Hello

  When I connect my laptop via hdmi cable to the TV digital sound is heard through the speakers, but not on TV.
  It worked well before, not now.
  Everything is connected, I tested with new cables. It is set up.
  Devices, it seems that none connected.

  Help, please?

  Try to activate sound output manually in the sound properties. What entries you can see in the devices section of reading?

  

• No sound from the TV using a HDMI cable not connected to the laptop ASUS G75VW.

  I have an ASUS G75VW, when I connect the HDMI to my TV, I get only audio through my computer laptop speakers or headphones, while it is plugged.  In addition, the TV picture is only 480 p.  When I check the sound icon, it shows that the HDMI port is "not connected" even though it is.  I tried to uninstall and reinstall the driver on both the NVIDIA site and the site of ASUS.  Same question.  Help, please!

  Hello

  Make sure that it has the TV volume.

  You can also make sure that the connections are appropriate. Try to connect to another HDMI port as well.

  Refer to the section: "Check if the cables are connected correctly" and set the HDMI audio device as the default value.

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab2&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I also suggest you to consult the steps mentioned by "Karthik Vengaloor responded on 14 January 2013" and perform useful methods.

  Reference:

  Windows 8 audio via hdmi on desktop cable

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-pictures/Windows-8-audio-through-a-HDMI-cable-on-desktop/79aaa786-8311-4FA2-8206-0e57b8861baf

  Hope this information helps. Response with status so that we can help you.

• Connection to the TV with an HDMI cable

  I have a HP G60 laptop with Win7. When connecting to a TV with a high-definition HDMI cable, all I get on the TV screen is my screen background image. No icons, no cursor, nothing. It worked the last time I tried it about 6 months ago.  The graphics settings are like a "expanded" monitor, which puts only annoys me anything.

  try to use the Intel® driver update utility you may need new drivers of HD.

• No Signal from my computer to the TV with an HDMI cable

  Hi, I have a Pavilion dv6 with operating system windows 7. the cable works with my friends on tv computer but not mine on television.

  Hi Zack1,

  Try this to see if it helps.  Download the Chipset driver and the graphics driver on the links below and save the installation on your desktop programs.

  Chipset

  Graphics driver

  Then, in Device Manager, open graphics cards, right-click on the graphic chip Intel and select Properties.  Click the driver tab, and then select uninstall.  Once completed, do the same for the for the Intel High Definition Audio Codec under his video and game controllers.

  Return to the desktop and install the driver from the Chipset, then the graphics driver.  When finished, restart the PC and see if that helped.  Check in that both Device Manager the Intel graphics card and Intel Hi Definition Audio codec have reinstalled successfully, and if you see now the Audio HDMI option under the playback (found in Control Panel, sounds) devices, as demonstrated by the top option on the screenshot below (ignore the fact that it is ATI ", I just said the TV icon option).

  http://S175.Photobucket.com/albums/W146/rproffitt2000/?action=view¤t=7Speakers.PNG&newest=1

  If it appears correctly, try the HDMI connection and see if it works now correctly.

  Best wishes

  DP - K

• No sound from the tv with hdmi w3 connection

  I have a standard micro HDMI to connect my w3 to tv.  When a movie plays on the w3, I can see the video on the Tablet and the tv, but only the Tablet has its.  Is this normal?   I checked that the tv properly with other hdmi sources works but have no way to test the brand new microphone cable or w3 drivers.

  I was unable to locate a compatible driver on intel.com.

  However, I tried the w3 with a different TV and everything worked as expected: even with only a 'driver' Intel ESS Audio Device (WDM) available.  Passage of the tablet on television was automatic.  I did plug in and turn on the tablet in front of the TV and everything worked.

  I tried the same procedure with the original tv and the results were good video but no sound from the TV.  The sound remained with the tablet.

  I hae 2 TVs and 2 blueray players.  I swapped every combination of TV and player and everything works well.  Since the Tablet works well with at least one TV, the hdmi cable is ok.  My conclusion is that the current configuration of the Tablet works with some TVs and others not, and until I can find a better driver I'll just have to live with it.  I wanted to be able to watch videos with the Tablet when I traveled and will just have to wait until I get whenever I go to see if it works.  Not very desirable but it's like that.

  Thanks for your suggestions and help.

  Problem solved (sorta).

• How to connect my Satellite C650 TV with a HDMI cable?

  Connect my laptop with my TV?

  I have satellite C650 laptop that is not that old, but ive connected my laptop to the TV using a HDMI cable and it does not work.

  The TV is a samsung 1080 p one, I would be grateful for some advice.

  Thank you very much

  Claire

  Hello Claire

  I assume you are using your laptop with original operating system preinstalled that you got with your laptop, so it should work without problem.
  Connect your laptop to the TV with an HDMI cable. If your TV has multiple HDMI ports please allow good port on the TV and after doing this FN + F5 key combination use switch from laptop to TV.

  When you use the FN + F5 key combination you see several options, including HDMI option?

• Recently, when I run a game CD I get video but no sound.

  original title: No audio on game CD
  Recently, when I run a game CD I get video but no sound. I tried all the obvious difficulties as re - install the game, reinstall direct X and nothing made a difference. I can play CDs of music very well. I cleaned my hard drive also and checked all the relevant drivers - everything seems to be "working properly" except that I can't get audio to play. Strange...

  You can try to use system restore to revert while it worked.
  http://support.Microsoft.com/kb/306084

  Also make sure that you have the patch 1.02 installed for the game.

• ezcap usb 2.0 video capture video but no sound error code 10

  ezcap usb 2.0 capture video like the video but no sound, it says error code 10

  the driver is downloaded I use Windows 7 64-bit, he worked on another computer
  Thank you
  Chris829

  Hi Chris829,

  Where did you download the drivers from?

  Method 1:

  Run the hardware and peripheral troubleshooting tool and driver updates by using windows update.

  Open the hardware and devices Troubleshooter

  For more information, see the article:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  Method 2:

  You can try to uninstall and reinstall the driver and check if it helps:

  Step 1:

  Uninstall the drivers from Device Manager.

  a. click Start, type Device Manager in start search box and press enter.

  b. Locate the device, right click on the device and select uninstall.

  c. restart the computer and check if that helps.

  Step 2:

  You can also check the manufacturer's Web site and try to install drivers Windows 7 64 bits for the device and check if it helps:

  Update drivers: recommended links

  You can also consult the support Ezcap link and check if it helps:

  http://www.ezcap.TV/index.php?Main_Page=index&cPath=71

• Sound is terrible but when I lock the pc with his play he will quality and full volume.

  My Acer Aspire V5 - 573G plays sound like its coming from the inside of a tin can no matter if its from the built-in speakers or external speaker/headphones. But if I lock the pc with reading he kicks with the volume and the quality of the sound. This started after I had my second update Windows 10 (first obtained then did a factory reset because of another problem and installed windows 10 even once).

  I tried the update - lying all the drivers audio and deactivation and activation.

  Is anyone familiar with this problem?

  If your audio system Dolby, check if it is enabled and try to turn it OFF / ON to check for changes.

• Internal speakers work but no sound when the headphones are connected.

  Internal speakers work, but no sound when the headset is connected Mr. fix gives a clean and level flight controlpannel indicator report / sound show sounds present but no sound on 3.5 mm jack audio 6.0 vista Home Basic travel mate acer 2480 laptop.

  Ive seen to be a common problem and have tried everything short of putting my computer or the cabel in the freezer for this problem, although I had an old pair of computer speakers that the power of the headphone plug in my garage-30 and a jack 3.5 cold didn't help.

  Most recent driver realtek audio and Manager running audio acer, everything seems fine all levels on and not cut anything off
  Lists of control pannel/sound/speakerproperties
  control information
  Realtek High Denifnition
  Reatek'a

  Jack information
  LR ATAPI internal ATAPI
  LR 3.5 mm Jack (will disappear if not plugged headphones\auxcabel)

  some levels are muted
  Advance tab default settings
  quality of studio 24 bit 48000 Hz

  boxes of exclusive mode checked (when it is disabled, that no sound was heard)

  Information appears a jack was pluged into and when unplugged.

  the computer knows its their and it shows his work but ive tried several pairs of headphones, including the new ipod with the remote, I tried an old pair of speakers that have no other energy source that 3.5 mm cord all work witch on my i pod, I also tried pluging in a splitter first and also an adapter to use a guitar cord pluged amp in an another apapter back down to 3.5 mm a little stupid and redundant but I didn't lie when I said I TRIED EVERYTHING I could think maximum\ read forums\ many watch on youtube.

  computer repair guy told me that fault call manufacturing equipment but guaranteed was 2 weeks upwards.
   
  I do not think it is a matter of hardwear tho and am convinced that it can be resolved is so close to work, I'm sure there must be a setting or patch or codec sumthing that will correct the problem, but it's my first (LIRA) ask for help.

  With frequent this problem or other similar appear from what my research has shown that I don't know that it can be resolved, or millions of laptops with drivers realtek audio hd are all defective.

  My next try is an external usb sound card. I tried already but no stores in my area have them (Wal-Mart, the source, Staples), all had never heard what I was talking about. I saw on the web less than 5 dollars but have no confidence in the sites offering the devices. Has anyone bought from a trusted site.  could talk to the teak of microsoft but they wanted to charge me $ $50 so decided to save money to buy a card usb sound, if I can't solve the problem.

  Sorry for any ignorance or typos and long reading but I hope someone can help with this problem

  Check with the manufacturer of your system's support and their forums (if any).

  Have you checked on the website of the manufacturer of the device for the latest drivers?

  Realtek - HD Audio Codec Driver right side
  http://www.Realtek.com.tw/

  Download - SAVE - will click with the button straight on and RUN AS ADMIN

  NOTE: Often restore audio drivers to check the version after installing and restarting is
  see if the version you have installed is there, otherwise repeat the installation - restart until it is. This may take
  several tests according to the recommitments how much he makes.
  Rob - bicycle - Mark Twain said it is good.