Satellite L655 - 19(d) does not start correctly

Similar Questions

• Satellite Pro L850-1DW does not start correctly

  Hello

  I have a client who has a L850-1DW / PSKDHE-00E005EN laptop.

  She keeps pointing out that the computer does not start successfully from the cold.
  She argues that the question arises mainly when the battery starts but sometimes when it is plugged into the mains.
  I can see where point of newspapers that BSOD were registered at the start and that, on more than one occasion, his computer was recovered from a restore of Windows. He has also recovered factory once too.

  Although I've seen the consequences of these issues of "start-up" I have yet to experience first hand with the device.

  I noticed yesterday that the BIOS is outdated (as I had an alert Tempro).
  I upgraded from 1.6 to 6.50. Yet once, I didn't have problems.
  I can't find the release notes for the BIOS so I don't know if this is a known problem that has been fixed.
  I don't know if this "intermittent" defect is just that or if the user has the power button down too hard or for too long and in fact inadvertently crashing NB itself.

  Any suggestion is welcome.

  Otherwise, I guess I have to connect a call with Toshiba.

  On this virtual path, it is not easy to say what the problem is here. In my opinion, you should ask your client if you can make the data backup and install original recovery image. To my laptop computer reviews must be tested with the settings without installation of additional software.

  > I don't know if this "intermittent" defect is just that or if the user has the power button down too hard or for too long and in fact inadvertently crashing NB itself.
  Who knows? Ask your client and show how to start the laptop by pressing the button walk / stop. It must be done slowly and for only one second.

• Mac does not start correctly

  Hello, my Imac does not start correctly. When he plays the macsound boots but only half of the load of the boot. Then it restarts.

  What I have done:

  (1) unplug everything and held the power button for 10 seconds.

  (2) held the shift key--> after that I have a few bluish vertical lines

  (3) held cmd + option + P + R-> after I have a few vertical lines bluish, but bigger

  (4) held the c key

  (5) very slow D

  (6) CMD + V-> it's fast to read and to search for errors

  After all these different things, randomly I these bluish vertical lines and sometimes a few flickers on my screen.

  Can someone help me?

  If I need to reinstall I can recover my data?

  I appreciate your help and thanks for your help.

  I solved the problem! I googled a lot and I found that it was the GPU was down. Well, I searched and found the solution...

  I think that apple don't want to hear or see. But if you are a little technical or handyman, Cook your GPU in the oven. Yes, bake your GPU in the oven! See the link: https://www.youtube.com/watch?v=9vPM41ZmLos

  I warn you all, be very patient and very carefully, or you can destroy your beloved mac. The case may go to an apple store workshop.

• My iMac does not start correctly. Instead, I just a gray screen. Safe mode starts, it's ok. No problem. So I ask what next step can I try? Thank you very much

  My iMac does not start correctly. Instead, I have a gray white screen. Safe mode starts, it's ok. No problem. But not in safe mode, only grey screen again.  So I ask what next step can I try? Thank you very much and sorry for my bad English.

  Reinstall El Capitan without erasing the drive

  Make sure that you have a current backup before continuing.

  HD recovery start:

  Restart the computer after the ring, press in and hold the COMMAND and R keys until the menu screen to appear.

  Repair

  When the recovery menu appears, select disk utility and press the continue button. Disk utility charges and select Macintosh HD entry indented from the list on the left.  Click the first aid tab in the toolbar... If disk utility reports any errors that have been corrected, then re-run first aid until no errors are reported. Wait until the operation is complete, then quit disk utility and return to the main menu. Select restart from the Apple menu.

  Reinstall OS X: Select reinstall OS X and click on the continue button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than Wi - Fi and more reliable.

  In the future please post in the appropriate forum. Your question is not related to the developers forum. I will take care of moved it.

• Satellite L655 new battery does not charge

  Satellite L655 new battery does not charge

  Hello halik

  It is not easy to say what the problem is here.
  Purchased new and original Toshiba battery with the same part number (model number).

  New battery is recognized by the system?

• 6 Lightroom does not start correctly

  LIghtroom 6a fonctionnee om my 10 (x 64) of Windows without problem for 6 months. After the installation of a slide (CyberViewX) scanner and a regular update to Win 10 that occurred automatically when closing down the computer, the 6 Lightroom does not start correctly since I restarted the computer. I uninstalled the scanner CyberViewX program and rebooted the computer again. The only thing that happens when you try to open LR6 is a message that an error has occurred when opening the catalog. I do not have a backup catalog, and there is a button where I can choose a different catalog. When you press this button I find the backup catalog, but when I chose this catalogue I go back to the original message and the backup catalog was obviously not chosen. There is a button to create a new catalog as well and when I press this button I just in my photo folder and there seems to be no way to create a catalog or open LR6. This form of dialogue is obviously not working correctly.

  There was a lock by the catalog file, and I deleted this file. I also tried all the tricks LR running as an administrator and assign full privileges for all users of my photo file.

  The only thing I have not tried is to uninstall and reinstall the whole LR6, but I have a lot of photos and work so I hesitate to do this without knowing that it is necessary and if sure that I can get everything back in order with the old catalog and all restored. Anyway to fix corrupted with the installation DVD files?

  What should do? Help!

  Hi bjomb,

  You suggest to choose the option to create a catalog and give it the name once you get the pictures folder window, and then choose create.

  This would create a new catalog.

  check if it opens the new catalog, and it passes under the background processes in the Task Manager.

  If it does not, then you need to reinstall Lightroom program and it would not affect your changes as changes are stored in the catalogues and catalogues remain it is same when the resettlement.

  Kind regards

  Claes

• Satellite C650 - Windows does not start correctly

  I have a Satellite C650, who does not start, when it lights there are two options, Startup Repair launch which leads to a black screen and mobile arrow, the screen remains like that until you turn it off the button stop (seriously ive left for about 10 hours). The other option is to start windows normally resulting in a blue screen and the laptop restarts itself.

  Help me please, make things worse I can't find the box that it came in which contains the guarantee and recovery disc

  Hey Buddy,

  You can start your laptop in safe mode? This means that if you press the F8 key before Windows starts and you choose Safe mode can you start Windows?

  If this isn't the case I think that it s something wrong with your Windows installation and that's why you need to use the Toshiba Recovery disk to restore to factory settings.

• Satellite U300 - Windows does not start correctly

  My U300 Vista Home run came in a boot loop: Windows can not start correctly and makes me want to use repair system, which failed and just makes me want to stop the computer again.

  I've tried without success, but failure mode it no more. I have a product recovery CD, but the system does not start from him. When I studied at the start, I saw that the BIOS does not detect the optical drive.

  Help please! Thank you.

  Hi nonprofit.

  You could try to load the default settings in the BIOS. Maybe it will be reconigze the CD/DVD drive again.

  Otherwise I think that it of necessary to replace the defective drive. Then, you would be able to use the Toshiba recovery disc again. This will restore factory in a few minutes.

• Satellite M45: Windows XP does not start when you click on the user name

  I have a portable Satellite M45 in XP service pack 2.
  After starting the PC, he gets that windows journal under the screen, I click on connect my name and nothing happens.

  I have completely reinstalled the operating system, updated all drivers etc, and it was fine for one night.

  The next day, I'm back to square 1 and cannot log in again.
  It starts in safe mode, but I don't know how to start to solve the problem.

  Can someone advise please?
  Thank you

  It's very strange!
  Have you removed any spyware or Trojans?

  Question you is really, really strange, and I guess that the 'bad' software causes such problems...
  It seems that something changes that replaces Userinit.exe.

  A similar question has been described here in the MS knowledge base:
  http://support.Microsoft.com/kb/892893

  It seems that some registry have changed and that's why the connection does not work correctly!

• Satellite A300 - rotates but does not start

  Hello

  I have a Satellite A300. I had several probems for the boot since 2 months ago: when I want to turn on my laptop, it turns on but the screen keeps black and it does not load the screen "Toshiba Leading Innovation". 'Satellite' (to the left of the mouse) light is on (it would go only about a second then to start and then turn off) and it will turn off.

  I try again for so many times with all the possibilities: without battery, only with the power adapter, two, but it does not start. I don't know what I can do. I always Hibernate my laptop because I'm afraid of can not start it the next day.

  Could you help me? If she cares: I had to buy a new battery (not original from Toshiba) because I had to change the original. No more changes to my laptop.

  Thank you very much and sorry for my English written: S

  Diego

  Hey Buddy,

  > I had to buy a new battery (not original from Toshiba) because I had to change the original. No more changes to my laptop.
  Of course, it s always advisable using Toshiba original spare parts only, but if you notice the same problem with AC adapter only it s not related to the new battery.

  Just to make a better diagnosis: If you have connected an external monitor? The internal display is perhaps the problem and doesn't turn on and it would be useful if you are testing the situation and an external monitor.

  But this noise as a hardware problem serious and in this case, you can wait to contact an authorized service provider. Technicians professional diagnostic tools to make an accurate diagnosis and to Exchange defective equipment parts.

• Satellite A300-15 a does not start after the installation of the alcohol program

  Hello...

  Satellite A300-15 has, I bought yesterday and after completing the installation of Vista, I tried to install "Alcohol" but my judgment of the laptop and now I'm not able to boot up the laptop.
  It does not start in any mode.

  I forgot to make recovery disks. I think that alcohol is not compatible with Vista. Error I get is below.

  Can someone tell me the solution?
  Please help urgent

  "A problem has been detected and Windows has shut down to prevent damage to your computer.
  If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps: blah blah... "

  Looks like a problem familiar to me, as I had the same one with the Daemon tools. After installing these tools, I couldn't start my Windows XP. I guess that it somehow mixed upwards of some drivers or registry entries, but not sure about that.

  OK, you can try to uninstall tool first start Vista in safe mode (press F8 before Windows starts upward).
  You should then be able to enter in Vista without problem.

• Satellite Pro A200 PSAE4E does not start after upgrading BIOS XP

  Hi, I need help!

  computer laptop, tested just got everything ok with Vista business and everything works fine.
  Now, I have a requirement to test a laptop duel boot XP build and follow the attached instructions to change the BIOS so that I can install XP.

  Restarted the laptop with the bios disk selected bios XP and everything seems ok.
  The phone rings, I answer. When I finished, I think back to the laptop and screen is white.
  Leave it for 20 minutes still white. Stop the laptop and reboot, no tosh start screen, nothing.

  Now does not start, so what do I do to get this thing working again?

  Hey Buddy...

  This looks very bad! :(il ressemble pas à quelque chose a mal tourné àle cours de la procédure de mise à jour dele de BIOS, et donc l'ordinateur portable ne peut pas démarrer correctement.)

  I hope that the ROM module must be flashed again.

  This can be done only by an authorized service provider.
  I see no other solution for contact ASP in your country and ask for help and handling.

  Good luck and best regards

• Satellite A200-24 b does not start

  I got my A200-24 b for almost 2 years now and the problem I have is driving me crazy.

  My laptop does not start at times. All the LEDs come, this Satellite down left indicator as well. But there is nothing on the screen.
  Doesnt matter what operating system I use, and I even tried to install the latest version of the BIOS. Nothing.
  I see the drive hard led flashing, and I can even hear the Vista startup sound.
  I have to turn it off manually by pressing the manual power button. Even this doest work sometimes. I remember the until routine start-stop 10 times.
  The problem is that Windows 7 will automatically repair mode. This never happened with vista.
  I even tried to change the memory chips live in vain.

  Will you please keep in mind what is happening randomly and I was not able to recognize a pattern.
  Any help will be appreciated.

  Its still under warranty.

  > Its still under warranty.
  Can you see Toshiba welcome screen or enter the BIOS settings?
  In my opinion you should not play with it. Put original Toshiba recovery DVD and install recovery image, if possible. Test it with the factory settings and if there is some problem of nearest service contact and let them repair your laptop.
  Satellite A200 is not latest model laptop, and I can imagine the warranty is valid for the next months only.

• Satellite Pro L650/L650D does not start

  My laptop Toshiba does not work...

  When he was for a restart, the it closed suddenly... I want to start (start), but when I clicked on the Start button, it does not start... The LED lights were lit, but the laptop does not start...
  At the present time, the lights went out, I don't know how...

  It means that the laptop is break down?
  I hope not, because I don't want to spend more money with that... :(

  Is there someone who could solve this problem?

  Thank you very much, long in advance,
  Raquel

  It is not easy to solve these questions, because nobody knows what is the problem. It may be BIOS related issue or some other hardware related issue.
  It's that there are not a lot of options in this regard.

  You can try to remove the battery and unplug the power supply, press the power button / stop for a while and try again with power running. The same thing happens again?

  > The lights were on, but the laptop does not start...
  You hear cooling ventilation? When the laptop is turned ON it turns off a few seconds later or stays, but without any reaction simply?

• Satellite A200 - support Button does not start when windows starts

  Hey,.

  Today, I decided to disable unnecessary programs as many as I could (to speed up my pc), so I went to Msconfig (I have vista home premium 32-bit) and a lot of things off. Including the "toshiba button support. The next time I restarted my additional buttons on the top of the keyboard all worked, next to one. Who normally turn on windows media player. This time, he did nothing at all. Game/resume, stop, forward, back and button internet all worked without problem.
  However, I really liked the WMP button, so I tried to find out what the problem was. I discovered that it was the support of the key, so I decided to reactivate it.

  However, this didn't not help: (.) I turned it in msconfig, but it does not start with windows more: (.) I know this is the program that I need, because when I run the program manually (this is the program: programfiles/toshiba/TBS/HSON.exe) the button works.
  I put a V in front of the msconfig program, but it does not work. Anyone has an idea why not?

  Edit: I found a solution, even if not the best. If anyone still has the same problem:
  I made a shortcut for the program to run (can be found in C:programfiles/toshiba/SCT and is called HSON.exe). Then I clicked start and said 'all programs', here I chose the "opstarten" folder, it comes to the Dutch version, but my guess is it's called something like 'start-up' in English. In this regard, I glued (copy / cut-> paste) the shortcut to the program, and now he begins again :)

  Hello!

  I agree with Akuma. You should try to reinstall the Toshiba value added Package. This determines media keys FN and all special functions on the laptop buttons.

  Search on the Toshiba site for an update:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye