Satellite L655 - black screen when power on

Similar Questions

• Satellite U405 black screen when I surfed on the internet

  Madam, Sir, I am a student in the third year and my laptop has a problem, I need help. This will be the black screen when I surfed on the internet for over 3 hours. Why?

  I guess my laptop battery is the key to the problem and a few friends recommend a battery for me web.
  What do you think about this?

  Your ad is a little strange to me.
  How you can surf internet if the screen is black? I mean, it's not logical for me.
  What Toshiba laptop model do you have?

• Satellite A200 - black screen when restarting

  I have satellite A 200 and I have the problem that when you restart, I have only a black screen and goes no further. But I do not beep. Only available in one place. I tried everything, but nothing puts the order. I tried to install Xp, but it does not work. Help.

  Hello

  You mean you don t nothing appears on the screen during startup? Not even the Toshiba splash screen?
  Is you can access the BIOS?
  Please check this box.

  You can also check this; Remove the battery and unplug the AC adapter. Wait a little (1 hour), then after this period of time the two parties again.
  Then try to start.

• Satellite A500 - black screen when I start

  Hi all

  I was using my computer yesterday and it started to freeze all of a sudden, I held the power button and turn off. Today, I don't then restart.

  I have two options:
  1 repair Windows
  2 start Windows normally

  If I choose option 1, it loads the Windows files and then gets to a black screen with nothing on it where I can move the mouse. If I choose option 2, it is "loading Windows" screen and stays there.

  The black screen occurs if I try to boot into Safe Mode, repair windows, or start from another version of Windows 7 that I have on CD.

  Please help me on what to do. I have important data that I've not saved so I have reset to factory as a last resort only.

  How can I access my data? Should I remove the hard drive and put it in another computer?

  Any help is appreciated.

  Hello

  > Should I remove the hard drive and put it in another computer?
  If you have important data on your computer, you should do this to make a backup of these files. I would recommend so buy an external HARD drive enclosure where you can put in the HARD drive to backup all the files on another computer.
  But I think that I will never understand why some people don't have a backup. I think it s the most important thing and always make from time to time.

  In any case, it seems your Windows installation is confusing upward and, therefore, it of needed to restore the Toshiba Recovery disk factory settings, but the it will delete everything on the HARD drive.

• HP pavilion 22xi backlit monitor goes black screen when using

  I have

  led screen have a HP Pavilion 22xi.  It is a year and no warranty left.  He started to go to a black screen when you use it.  I have to unplug the monitor for the display.  the power light lights up but won't stop him.  I saw a few ppl having the same problem, without success to get this resolved.  I tried external monitor on another laptop and have the same problem.  I replaced the AC adapt power and also downloaded the drivers for the monitor.  It's very frustrating.  I tried to reset to factory setting, and nothing changes.  It works for a while, then all of a sudden go to black screen and I have to unplug it from the back.  Please help...

  Hello @squiggy,

  I understand that your LED HP Pavilion 22xi screen just shuts off and will not turn off. After reading your post, it seems that the problem you describe seems to be a physical problem. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html.
  
  I want to thank you for display on the HP Forums. Have a great day!

• Envy 15-j144na: indefinate black screen when you turn on

  I need help I have a laptop of hp envy 15-j144na

  the power led lights up when I press the power on button. the f12 key led stays orange. the caps lock white button will blink twice every four seconds. the screen never lights up.

  When I turn on, I hear the drive power upward.

  I tried to take out the battery and unplug AC and then pressing the power button / stop for 15 seconds then fix ac and power on.

  I tried to remove the battery and memory and power cable. then put it all back together and tension.

  I tried to hold the windows key and the b key and pressing power for a second, but it is not the bios update.

  I tried to connect an external monitor, but it does not show anything

  When I power the laptop on the bios does not appear if I press f2 or DEL or esc.

  before that, windows is checked 10 crashed when using bittorrent and then reset and black screen now power on.

  any ideas?

  I left my laptop this weekend, and he had the same symptoms.

  I swapped the hard drive to another hard drive.

  The new hard drive has windows 7 and the bios reported that he was unable to start. It was different because I could see something on the screen at least BIOS.

  Then I plugged my hard drive laptop screen and back to work and it started windows.

  I don't know why the laptop now works. Very strange. I have never seen this on any previous laptops or desktop computers.

• PAVILION 15: BLACK SCREEN WHEN OPENING THE LID ON WAKE UP

  THE LAP TOP SHOWS A BLACK SCREEN WHEN OPENING THE LID.

  THE SCREEN WORKS WELL WHEN PUT ON, BUT ON CLOSING THE LID FOR A WHILE AND RE OPENING STARTING THE ENGINE AND THE LIGHTS FLASH BUT THE SCREEN IS BLACK.

  TO RETRIEVE THE SCREEN POWER BUTTON MUST BE PUSHED AND WHEN FLASHING JUST AGAIN PUSHED THE SCREEN THEN WAKES UP.

  THIS FIRST STARTED WINDOWS 10 CHARGE BUT WHE I GO BACK TO THE FACTORY SETTINGS AND WHICH IS 8.1

  I TRIED TO REMOVE THE BATTERY TO RESET AND REMOVE AND REPLACE MEMORY CARDS AS SUGGESTED BY SOME SITES I RELOADED ALSO BIOS AND I STILL HAVE THE PROBLEM.

  I WOULD BE VERY GREATFUL FOR ANY HELP.

  Hi @lily-springer,.

  Thank you for your update.

  I am pleased that now when you close the lid, it does nothing.

  You don't have the possibility to contact the HP support for assistance. They can access your system remotely to help overcome the difficulties.

  Contact HP to Contact HP Support assistance

  Good luck!

• HP Compaq has a black screen at power up... The BIOS Corruption failure?

  I have a Compaq Presario CQ61 product: VM9496Q2X model: CQ61-319WM series: [edited by moderator serial number], which has a black screen when I turn on.  The wifi button stays red and the caps lock flashes twice.  I think that it indicates a BIOS curruption faliure.  I tried to reset by unplugging and removing the battery and holding the power for 30 seconds button.  I tried the f8 key and esc repeatly to power upward. I also tried pressing the windows and the B key and the power key, but nothing has worked.  Any help would be greatly appreciated!

  I'm very disappointed with the lack of response of an HP Service Technician.  I ended up taking my laptop to a computer repair shop.  My problem is that the graphics card has become dessoudée of the motherboard.  They have rearranged my motherboard and it works fine.  fix $ 79.00.

• Start-up problems: I have a black screen when I log in the menu

  When I start my computer, I get a black screen when I log in the menu. I can still access the computer on safe mode, but I can't find a solution. Antivirus Avira found no detection, so I don't think that's associated virus.

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Scan with Malwarebytes in SafeMode with networking to ensure:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that thePerform quick scan option is selected and then click on theScan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button toview the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  It's Vista Security Forum.

  If the above does not she, repost in the Vista repair and recovery Forum:

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/threads

  See you soon.

  Mick Murphy - Microsoft partner

• got black screen when changing the screen background images

  got black screen when changing the screen background images

  can any one help

• Black screen when viewing of DTV, can hear the program, but no image.

  original title; Windows XP Media Center Edition 2005 - black screen when viewing of DTV, can hear the program, but no image.

  When I set up my Windows XP Media Center Edition PC to view DTV, I used the Setup etc., XP scanned and found all the available DTT channels. I thought as much, worked for BBC1, BBC2, worked, then I went to view ITV1 and other channels, could hear the noise perfectly, but there is no picture, just a black background. He used to work because I previously installed the computer. However, wouldn't be a difference that the TV signal will of the antenna, in a block of TNT, and then in the computer, there always used to work. I have that, it is not a signal problem because I could watch the TNT cable SCART on the computer and the image and the sound is fine just using the freeview box. It seems to be the Media Center. Please can someone help me? Thank you

  Apparently, this was caused by an outdated ATI graphics card driver. I recommend upgrading your graphics card driver to resolve this issue. Should work fine then

• Computer stops responding with a black screen when you start Windows XP. Cannot select anything advanced startup options

  Original title: can't open Windows
  I can't open my laptop at all... block when I select anything in the mode without failure or screen black normal mode :(
  What should I do? Thank you!!!

  Hi Mihou,

  1 have. what changes you made before the question?

  2. What are the options you see in the advanced startup options?

  You can follow the methods in the article in order to solve the problem.

  Computer stops responding with a black screen when you start Windows XP
  http://support.Microsoft.com/?kbid=314503

  Azeez Nadeem - Microsoft Support [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Computer stops responding with a black screen when you start Windows Vista

  Computer ceases to respond with a black screen when I run Vista, this happen right after the installation of updates. original title: computer stops responding with a black screen when you start Windows XP__

  If you think that Windows updates are loaded:

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  MS - MVP - Elephant Boy computers - don't panic!

• Black screen when loading apps on the device Dev Alpha

  Dear all,

  can someone give me advice on the question? (I have found no similar post, so please forgive me if duplicate messages...)

  My configuration:

  -Alpha OS Dev device: 10.0.4.197

  -SDK Webworks 1.0.2.9

  I always get a black screen when I deploy & launch applications for the test (I use a debugging token)... I'm afraid that I may have problems of compatibility between the version of the OS and SDK Webworks... I'm about to upgrade the unit right now, but if anyone else has experienced the same problems, please let me know! Any help is very appreciated!

  Moreover, the two training simulators & VMWare work very well...

  Thank you very much

  -marco

  Hi Marco,.

  Could you let me know if the update of device solves your problem?  If this isn't the case, you are able to provide example code, and I can test on my end?

• Fable III has a black screen when the game restarts in the locker room.

  I loaded Fable III, but the locker room screen was black. I went to Nvidia and downloaded the latest driver for the Ge Force 7800 GTX. I have Windows 7 with an Intel dual core & 4 GB Ram. I rebooted Fable III but I still have a black screen when the game restarts in the locker room. The internet shows that my CPU will launch the game. How can I solve this problem of black screen?
  Thank you

  Original title: Fable III problem

  Hello

  Fable III is a graphically demanding game designed for next generation equipment. Your computer must have both a powerful CPU (processor) and a graphic chipset (video card). The video card must also be using the latest video card drivers for the highest level of performance and compatibility between your hardware and Fable III.

  The issue is limited to Fable III for PC? Are you facing other than display issues when reading Fable III for PC?

  You can view the following link to learn more about this:

  Fable III for PC: video and required system configuration problems

  http://support.Microsoft.com/kb/2547300

  I hope that helps!

  If you need help on this problem or any question of windows in the future let us know.