Satellite L655 - DVD Player cannot not all data on a disk

Similar Questions

• Satellite A660 - DVD player does not recognize some DVD

  I have a new Satellite A660-17th with a drive HL-DT-ST DVDRAM GT30N, running under Windows 7 64-bit.

  The reader will read most DVDs. Commercial DVD (region 2) are very good. However, there are problems with the DVD recorded with DVD recorders. Recordings of DVD + R using a Philips machine work very well. DVD + R and DVD - R using a Sony HDX 1095 of RDR machine do not work.

  I hope that the disc is ok and that this problem can be solved by changing some settings or other?
  Any ideas?

  Hey,.

  If commercial DVDs are working properly, it s final related to your own created DVD recorder of DVD.
  It s knows not to adjust something on the DVD player without region code

  In my opinion, you should test different brands of DVD to check which is compatible with all devices.
  My favorite is Verbatim DVD - R TDK also makes good discs

  Check this box!

• CD DVD player: can not read data DVD discs that burned same machine

  Laptop with Windows Vista cannot read data DVD discs that burned same machine.  The discs work on another computer.  My laptop will read CD disks, he did, and it will play DVD movies. What's wrong?

  Hello

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD &)
  Burn DVDs and CDs and read DVDs). So it is not unusual for 1 or 2 parts to no function
  while others are doing so correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner
  could help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always
  issue.

  CD/DVDs have a tolerance + - and your can read/write on the outside edge
  tolerances of the disks. They may be delivered, but it is usually cheaper to replace
  the reader.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  This troubleshooting might not help if there are problems of alignment and wear it
  is worth it.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then check the cables
  both ends. Remove and replace, do not just tight. For laptops, you can often clean the
  power and data of the contacts with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the system manufacturer
  and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD &)
  Burn DVDs and CDs and read DVDs). So it is not unusual for 1 or 2 operational parts while
  others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Satellite A50: DVD player does not read DVD only CD

  On my Satellite A50 DVD drive can only read CDs now but not DVD. So I'm not able to use the recovery disc.
  My BIOS is up to date, I think.

  Hello

  Well, what can I say? For me, this looks like a disk failure.
  Maybe the lens can not calibrate properly and that's why the drive is able to read the CD.
  I don't think that the replacement of disc will help you :(

• Satellite L30 - DVD player will not read CD - R / CD - RW

  I have a L30 with a carpet * a ram drive uj-850 s DVD. He reads prerecorded CDs/DVDs, but during the insertion of a CD - R or CD - RW with files that have been burned on the disc it comes tells me that I have inserted a blank disc.

  Also does not burn a disk (tried to burn files to Itunes and it seems to work but the disc was blank when I tried to read).

  I read on another forum that I should delete the upper & lower registry values filters in the folder {4D36E965-E325-11CE-BFC1-08002BE10318} in the registry, which I think could be the wrong advice to follow.

  I deleted the upper part and then realized the lesser wasn't there anyway - it has not solved the problem and I think that it may have caused instability as I have weird errors with different applications since then.

  Help, please.

  > removed the upper part and then realized the lesser wasn't there anyway - it has not solved the problem and I think that it may have caused instability as I have weird errors with different applications since then.

  Well well... from my personal experiences, the results of burning depends on different factors.
  First that not all CD and DVD is cared for and compatible. You need to test different manufacturers!

  Second, the different burning pre-installed applications could have a negative influence on the burning process! I only use Nero and AI? m very happy!
  Last but not less dysfunction of CD/DVD could cause this problem.

  SO what to do?  :| First check if other media works properly and try to burn with Nero. It would also be desirable to renew the operating system to avoid errors in program!

  Good luck

• Satellite A200 - DVD player does not open

  Hello

  I had no computer laptop withmy problems so far and my DVD/CD does not open. I'm not savvy in same computer so bear with me! There is no lights there at the moment and when I turn on the laptop it does not sound like he used to. I looked on other forums and tried things like access to the Device Manager, but it says that it is on it - any other suggestions would be welcome.

  Oh, and I get no error message and in Device Manager its says that "the device works correctly.

  See you soon

  Hello

  You can try to open the CD/DVD drive using something small and thin. Near the eject button, you should find a small hole.
  You have to slide - in the little thing and should manually open the CD/DVD drive.

  Then try to insert a CD or DVD disc and close the CD/DVD drive.
  Check if the drive can read data from the disc.

  I would recommend also check if the CD/DVD drive would eject the disc by pressing eject button check different opportunities.

  Welcome them

• Satellite A300 - DVD player does not

  Hello

  I wonder if someone can help me my dvd drive does not work.
  The little green light does not light and it does not open.

  I used the PIN on the side to open and put a disc in but still nothing.
  I also looked in device management, but he says that the driver is working fine

  Please help im totally stuck

  Dean of the thanks

  Hello

  It seems that your drive is defective and must be replaced. If he doesn t open more you can nothing do I think.
  But you can open the drive if you go into the BIOS?

  If this isn't the case, you should contact the service provider authorized in your country. They can replace the drive of your. If it of under warranty, the repair should be free for you.

  Good luck! :)

• On Satellite L500D DVD player does not work - Code 39

  my dvd driver does not work it says driver may be corrupted or missing (code 39) I got it 3 days new

  read here:

  http://APS2.toshiba-tro.de/KB0/TSB7801XL0000R01.htm

• Satellite P20: DVD player does not work

  I have a rug * UJ-820 s for a DVD player, but it has stopped working, I put a disc but nothing more to share a bit of ROAR. I looked in the Device Manager, where it says that "the driver may be corrupted or missing. (Code 39) »

  I uninstalled and reinstalled but I still get the same error. Anyone know if there is a update available or if there is something else I should do to address this issue? Thank you.

  Hello

  I noticed that many users on this forum have reported the same issue. It's a very strange question, and I really can't understand why this happen.

  In any case, thanks for the comments.

• Satellite A500 - DVD player does not recognize a single disc, but the other doesn't

  Computer: Satellite A500
  Software: Vista Edition Home Premium

  Disk drive recognizes all other disks (5) overall, but you don't "see" one of the disks.
  The drive works very well; I've cleaned the disc (rightly) and still no luck. \

  That is what it is?

  Hello

  Eventually the disk is defective (production error) or it s not completely compatible with the CD/DVD drive.
  There is nothing unusual and can always happen. Disposable this disc and try another...

• Satellite L650 - DVD player does not work and not visible in my computer

  Hello

  recently, I noticed that my dvd on my toshiba drive does not work.
  This isn't even apper in the 'My Computer' folder.
  And when I put a cd or dvd in the drive, it does nothing... Here is the screen of "My computer":

  http://img267.imageshack.us/img267/8458/31854306.jpg

  He had previously worked, but I don't use dvd for a long time player and when I tried yesterday it did not work...

  Hello

  You need to remove the upper and lower registry filters.
  But before doing so, please remove the CD/DVD drive in Device Manager.

  Then start the registry (regedit) and then remove the filters above and below this key:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Then restart the laptop

  I think this should help you

  Good luck

• Satellite A100-998: CD/DVD player does not recognize digital camera installation disk

  Hello world.

  I just tried to install my digital Canon camera on my Satellite A100 - 998 (PSAA9E), but the drive just won't start. It is not recognizing that the disc is in the drive.

  I tried the drive with a music CD and it works very well and thinking the disc that came with the camera was defective, I tried in my desktop pc, and it installed without a problem.

  Anyone have any ideas why my portable drive is to play music CDs, but not to pick up the cd software...

  Your help would me most appreciated.
  Rgds,
  Neil

  Weird noises...
  Do you have any burning application or something that has to do with CD-writing/emulation/etcetc. ?

  Maybe these programs may cause such problems. Just to realize what you have on your system and tell us, maybe we can find a solution.

  Welcome man

• Satellite A100-447 - DVD player does not read some discs

  Hello

  I have a 4 month old Satellite 100-447 (PSAAN), came preloaded with Vista Home Premium and a carpet * CD/DVD super-multi UJ-850 s player.

  The DVD player does not work properly. It will recognize a few blank, but never DVD-R DVD and won't recognise any DVD at all serious. He is very good with CD and DVD movie discs. It's just recordable DVD where there is a problem.

  Also when you try to write to a DVD, when he chooses to recognize a TI-error in half way through.

  What can I do?

  Thanks for your help.
  Adam

  Hello

  You can do the follwowing:

  Go to this website http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp,

  Download the latest update of the firmware for this drive, install it, and then try again.

  Sometimes, the manufacturer must update their readers for the newer recordable media and so I think that it is possible that your drive is simply not up to date.

  Welcome them

• CD\DVD player does not display the contents of the data DVD.

  CD\DVD player does not display the contents of the data DVD, but will display the content of the data CD.  What is happening on more than one PC, and it began when Active Directory GPOS have been applied for the PC.  If untying policies the problem persists.  What happens on DVD ROM and DVD RAM drives.  Scanning software has been added to these machines, think it might be an ASPI crush.  All these machines are XP SP3 running McAfee.  When you insert a DVD with data on this topic, the name of the drive in windows password DVD RAM drive to CD drive, and if you try and browse the DVD it displays as a blank CD.  I changed something on the PC with the policy but cannot understand what he.  Other identical PC can view the contents of the DVD very well, but they never had the same strategies.  Any ideas, thank you.

  Hi PDoneen,

  The restore of the system; restore the computer to the before date when policies have been launched on one of the affected computer.

  You can check the link for the steps below: how to restore Windows XP to a previous state:http://support.microsoft.com/kb/306084

  Post back with the results.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite L650 - 1 Q 3 - DVD player does not recognize DVD

  Hello everyone,

  My dvd player is not able to load any dvd. The loading time takes infinite for a long time, but he doesn't play CD
  I tried the Microsoft Fix - It already and remove the key from regedit Upperlimits too.

  Computer sees dvd station and dvd inside, he just cannot run it.
  I am using Windows 7 64 bit with all the updates.
  What should I do now?

  Kind regards
  Joost Verbraeken

  Hello

  Have you tried to install a third party player to check if the problem persists?
  You can test it with VLC player. Download is free.

  You created the recovery DVDs?
  It will be interesting to know if the DVD writing is possible.
  Only a few DVD recognized correctly in Windows Explorer?

  You know that's not easy to say what the problem is here. You need to know if it's general order questions with optical drive or related to the drive that you are using.