Satellite L655 sometimes does not recognize the wireless card

I have a L655. Most of the time it works perfectly fine. Sometimes when I turn on my computer, it does not recognize my wireless card. He considers that it is not at all.

The icon in the status bar says that there is no cable ethernet plugged in and nothing on the wireless.
Usually this icon is not present, and one for the wireless is (whether it is connected or not and if there are connections available or not). In the device manager there is nothing for the wireless card.

Under network card it has only ethernet. Its as if it does not exist.
Basically the way to solve this problem is by restarting simply my computer until he figures it.
Sometimes, it can take 5 or more times.

Any help please?

Hello

What satellite L655-xxx you have exactly?
As far as I know there are different models with different wireless network cards.

Your BIOS is up to date? Please check this box.

So now to a few proposals of solution:
First of all that I recommend to check if the update of the Wlan driver would improve the Wlan functionality.
In addition, you must deactivate the energy saving feature for Wlan in Device Manager and Windows 7 power options as well.

Tags: Toshiba

Similar Questions

  • Satellite A110-294 does not recognize the wireless card

    Hello

    the question is:
    Why my Satellite A110-294 does not recognize the wireless card?

    I re - install Xp PRO with all the drivers.

    I have try all the drivers Wireless: Wlan intel + proset intel atheros wlan + wlesscmgr

    I don't understand, can you help me?

    Thank you
    André

    Hello

    To my knowledge, the A110-294 uses the Atheros WLan card and therefore the Atheros Wlan dirver should be the right one.

    You can find the latest driver for Atheros WLan here:
    http://APS2.toshiba-tro.de/WLAN/

    Just a question;
    You see the local network card in Device Manager? I mean, you should see an Ethernet controller or an unknown device in the network adapters
    The driver is missing, then the device must be marked with a yellow exclamation point

  • Satellite A205-S4577 does not recognize the SD card inserted

    Hello

    I have a Satellite A205-S4577.
    I just got 2GB sandisk wake up your phone mem card.
    When I insert the card into my card reader it does not even after that I restart my system.

    Can anyone help?

    Your laptop will recognize standard SD cards?

    There may be a compatibility issue with microSD flash memory cards.

  • Equium P200 does not recognize the wireless network with Win XP card

    Dear team

    I recently installed windows XP on my Equium P200 (he had originally vista).
    Now, I have a problem with the Atheros wireless card. The computer does not recognize the wireless card is installed. I tried uninstalling the drivers and reinstalling, but nothing works. In the hardware Manager, I get an error code 10 when you try to install the drivers. Can someone please help.

    Thank you

    Are you sure that you have an Atheros WLan card installed on this laptop computer at 100%?
    I recommend you to check the bottom of the unit. There are labels with information about the wireless network card! I think that there is a number. Then google for this number and you should get information on the wireless network card.

    Eventually he s one card Intel. | In this case, you should try to install the driver from Intel.

  • PC can not recognize the wireless card

    Hello. I have a Presario CQ60-205EZ running vista home basic 32. I had virus problems and had to format and reinstall vista. I used vista (Home premium 32) friend dvd with my product key. Everything is fine, but now, the computer does not recognize the wireless card. It does not list in the Device Manager (I think it's in the other devices section) and I tried to download some drivers from the hp site and apply them here but they do not work. I even tried to go into the bios, but I found no option to deal with it. I suspect that miss me a pilot but which and how to apply it? Can anyone help please? Thank you!

    It works!

    Thank you very much, this forum is great!

    Best regards

    Jorge

  • I have a toshiba laptop purchased recently. After the scheduled updates it does not recognize the wireless network. I have to do a system restore. is there a solution for this problem?

    I have a toshiba laptop purchased recently.  After the scheduled updates it does not recognize the wireless network. I have to do a system restore.  is there a solution for this problem?

    Hello

    Make sure you have the latest network adapter drivers fron toshiba

    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

    and if windows update is at the origin of the problem change how to get updates to uncover the problem update

    When you have found the issue, a right click on it then invited uac then hide

    read the information on the link below

    http://www.bleepingcomputer.com/tutorials/tutorial140.html

    Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

    Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  • Moto Q does not recognize the memory card

    I just added a 2 GB memory card that is approved for the Moto Q 9 M... For some reason, my phone does not recognize the memory card. In the memory section it shows the card is unknown.

    With a previous discussion, I saw, I did add the memory card on my PC. It does not recognize the card... Any ideas?

    Thank you

    Jason

    Try formatting the card on your pc and then install it on the phone. If it's 2 GB sandisk it should work fine. If the phone or the card is left. Sometimes reformat card strives to set everything right.

  • Portege R700 - Autocad 2011 does not recognize the graphics card

    Hello

    I have toshiba Portege R700 with 64-bit win 7 installed.
    I need the computer for use with autocad 2011.

    For some reason any auocad does not recognize the graphics card installed on the computer.
    I suspect it because very little memory is allocated for the graphics card.

    How can I change with the memory allocated for the graphics card, or perhaps, can someone show me where can I find a driver that supports autocad.

    Thank you very much!

    Hello

    What Portege R700-xxx you have exactly?
    As far as I know the graphics memory cannot be assigned manually.
    Everything is controlled by the graphics driver and you have no influence on this

    You can try updating the graphics card driver maybe it would help.
    The most recent driver found on the page of the European driver Toshiba
    If not, you should check the manufacturer of the graphics chip driver

    Good luck

  • 5 c does not recognize the sim card

    I got a plan on the development of media and 5 c. Phone is unlocked and now does not recognize the sim card. What should do?

    What is the error message you get?

  • T440p - Ericsson N5321gw does not recognize the SIM card

    Hey, my new T440p with integrated WWAN Ericsson N5321gw does not recognize the SIM card. I am running Win7 64 Bit and in the Device Manager, I see the Ericsson unit without any error. Once I launche logins, I have the error message if there is no SIM card inserted and I have to insert the SIM card and try again. The SIM card is inserted as indicated next to the slot (although I tried in other ways, too). I tried two different SIM cards just to be sure, two SIM cards work in my phone. Any idea? Thank you very much!


  • Hello! I restored my iPhone 5 because IOS 9.2 does not work well, and now the IPhone does not recognize the SIM CARD ☹️ please someone help me! What can I do?

    Hello!! Recently, I have restored my iPhone 5 because IOS 9.2 does not work well. But now my iPhone does not recognize the SIM CARD.

    I Don' t know what to do, help me please

    You get an error message?

    What did he say?

  • An SD card is inserted, but my laptop Packard Bell does not recognize the memory card.

    Original title: peripheral equipment

    An SD card is inserted, but the PC (my laptop is a Packard bell) has no reaction. It does not recognize the memory card.

    Thanks for your help.
    Christine.

    Hi Stefano,

    Thanks for posting your question in the Microsoft Community.

    This problem can be caused if the SD card is damaged or the card reader may not work properly.

    1. What is the brand and model of the SD memory card?

    2. What is the number of the model of the Packard Bell laptop?

    3. you receive an error code or the message after inserting the SD card into your laptop?

    4. have you made any recent hardware or exchange of software on your computer before the show?

    5. have you tried to insert different SD card in your laptop?

    6. have you checked the SD card in another computer?

    7. you try to connect the SD card to a built-in card reader or externally by USB port card reader?

    8. is the specific question to a SD card or any type of cards?

    9. are you able to detect the SD card in the Device Manager?

     

    Open the Device Manager:

    http://Windows.Microsoft.com/en-in/Windows7/open-Device-Manager

    If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

    Open the hardware and devices Troubleshooter:

    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

     

    For reference:

     

    Updated a hardware driver that is not working properly:

    http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

    Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

  • Since the new update Illustrator does not recognize the graphics card to my SURFACE PRO 2 and the digitizer stylus does not work properly.

    Since the new update Illustrator does not recognize the graphics card to my SURFACE PRO 2 and the digitizer stylus does not work properly.

    Any ideas out there?
    I know the pro 2 surface is not the real model, but at least it should work fine.

    arwinq,

    You can see the system requirements, including the maps here.

    https://helpx.Adobe.com/Illustrator/system-requirements.html

    but I fear that you may be taken in this GPU issue described by butz in post #13 here:

    https://forums.Adobe.com/message/7773402#7773402

    You can try to switch between GPU and CPU by pressing Ctrl / Cmd + E, or you try disabling GPU performance by clicking on the icon of the rocket in the bar of the App, or on the top of the menu bar, deselect the box Performance GPU. You may also uncheck performance GPU in your preferences.

  • Satellite 1900 (PS192E) - does not recognize the CD/DVD

    Hey all,.

    I just bought a Toshiba Satellite 1900 (PS192E) and place an old 20 GB HDD from an old laptop.

    When I boot, the screen is in VGA 16 color mode, it recognizes the DVD player, but does not recognize the CD/DVD when inserted. I tried to install and run the utility "driver robot" Toshibas, but the display is such that I see all of the screen to start the search.

    If there is someone out there who could give me some advice, I would be extremely grateful.

    Thank you very much

    James

    Hello

    OK, you have installed the disk HARD of another laptop but too format the HARD drive? I mean if the HARD drive performed from another laptop, you need to reinstall Windows because now you have other hardware installed.
    What version of Windows is it?

    If you want to install a driver for the graphics card go into Device Manager and select Update driver.

  • Satellite Pro 6100 does not recognize the single battery external power

    Whenever I have start Satellite Pro 6100 Win XP Pro with standard battery mounted and connected to the power supply computer laptop does not recognize the ext battery supply single supply and during 'start-up' goes into hibernation.

    By pressing the power on button laptops "wake up" and indicate that the battery is empty or may not even decide when completely loaded, then says connect the station even if still connected, looking under Toshiba console when it runs shows running on battery when still in the power of the ext?

    I have two batteries and both give the above symptoms even when I remove ext of laptop power always runs with power supply by battery but no light orange or green for battery.
    Any ideas?
    Concerning
    Phil

    Hello

    Is your AC adapter malfunctions or there is something wrong with the power supply to electronic s laptop.
    In the first case you could purchase a new compatible AC adapter and could check if the laptop can run successfully.
    The second possibility is a serious hardware problem, but in this case, the laptop must be checked by an authorized technician.

Maybe you are looking for