Satellite L655 touchpad button ON / OFF does not work after the installation of VAP

Similar Questions

• Satellite Pro L20: FN + F8 key does not work after the installation of new

  Hello
  I just reinstalled xp on my laptop and I can't find drivers that work my hardware (F8) wireless function key.
  Unfortunately I don't have the CD of drivers Toshiba with me, I work as an expat abroad so I count on the official website of Toshiba for my drivers.
  I downloaded all drivers successfully vital but can find no reference on the site that will help me with the problem.
  I tried to turn on the radio via the LAN setting but when I try to activate I get the message telling me to turn on the hardware!
  Any suggestion would be accepted with gratitude.

  Thank you

  Hello

  On the Toshiba driver page, you will find the installation instructions how to install all the drivers of Toshiba.
  It is very important that pilots will settle in the right order.

  In addition, if you want to spend on the WLan, you have to activate the WLan switch on the side of the laptop and also to enable the antenna WLan with FN + F8.

• LIP does not work after the installation of a local language, writing in my windows software 8

  LIP does not work after the installation of a local language, writing in my windows software 8

  

  This icon is hidden... and there is no preview in the installed LIP.

  
  I hv uninstall the software, but for the LIPS does not work

  Hello

  You use the Microsoft Account or Local user account?

  Create a new user account and check the status of the question in the new user account.

  Create a user account

  http://Windows.Microsoft.com/en-in/Windows/create-user-account#create-user-account=Windows-8

  You can also refer to:

  User accounts: frequently asked questions.

  http://Windows.Microsoft.com/en-in/Windows-8/user-accounts-frequently-asked-questions

  Thank you.

• Satellite U200 - sound does not work after the installation of Win8.1

  Hello guys,.

  I have some old Satellite U200-165. I installed windows 8.1 Enterprise assessment successfully after that I changed the hard drive SSD, but the sound does not work. Windows showing that his work perfectly, but it does not come out.

  An advise please.

  Satellite U200 is a pretty old and not supported for Win8 or Win8.1 machine. I think that we have no report on this forum how this old piece of equipment works with Win8.

  If the sound card is properly installed, have you checked all the sound settings?
  I presume that the same problem is with a headset, right?

• Audio does not work after the installation of Vista on Satellite Pro a series?

  Done a format and a new facility with vista ultimate and can't get the audio from realtek to work.
  The drivers install properly but don't have still no sound.

  Download realtek 97 and drivers HD, but still no luck.

  I had this problem some time and fixed it but I can't find where I found the solution of :(

  Any help would be great, thanks!

  Hello

  First if all would be very useful to know which model of laptop you have.
  Second, you could find the driver of his right on the page of Toshiba and so you n t need to test several audio drivers! The one on the Toshiba driver site works for sure.

  I read about a similar problem on Vista OS and these Toshiba document should help you:
  [Audio cut off (no sound) after the installation of Windows Vista: http://askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=1886 758xml & sliceId = & dialogid = 54568603 & stateId = 0 0 51373343]

  Check it out!

• Qosmio X 500-webcam does not work after the installation of W7 Ultimate

  Hello
  I have a big problem.

  First: Sorry English is not my native language and I can't find a German support forum here.

  I have a new laptop Qosmio X 500, and I installed Windows 7 Ultimate 64 - Bit of news. I try to install all the drivers from the site Web of Toshiba, but it't really didn't work with the Webcam.
  I can't install it. It works once, I can install the "Web camera Application", but he says that it cannot find the web camera. Then, I uninstalled the "Web camera Application" and try to installed new.
  Who does not work now too. He asked: "if I'm going to delete all" but I delete them all! And I can not install the "tinstall.exe" I don't know what it is, but it is from the WebCam Driver of Toshiba.

  In the Device Manager there is no Web camera too.

  All means what? Is the WebCam broken? I've had the laptop for 5 days.

  Greetings

  Hello

  Qosmio X 500 shipped with Win7 64 bit OS so I really put t understand why you use clean install of the OS. Ultimate version is so important to you?

  At first, I must say that the Qosmio X 500 is more complicated for laptop for any new OS install and all things must be installed in the correct order.

  But back to your questions:
  > All means what?
  It probably means that you are missing something
  > Is the WebCam broken?
  Probably not. Install original OS, you got with your laptop and test the features of cam again.
  > I've had the laptop for 5 days.
  This statement is not relevant at all. If you do something yourself and it works not that's problem and even your laptop is 5 hours old.

  What now? is original OS install an option for you?
  You have created recovery DVDs until you have installed the clean version of Win7? I hope because without DVD, you won't be able to install it using the option of HARD drive recovery.

• Intel WiDi does not work after the installation of update Windows 10 anniversary. X 1 yoga

  I get a message Notification of Windows ' cannot run this application on this PC: Intel WIDI software display does not work on this version of Windows. "

  This message appeared after the upgrade to Windows 10 anniversary.

  Indothai,

  Microsoft to Intel Widi support was eliminated in 10 Windows. WIDI has been replaced by an application called Miracast. If you try to run an application depends on Widi, you may need to upgrade the application or to find a new use.

  For more information, see this Intel review: https://communities.intel.com/docs/DOC-111153

  Thank you

• Windows Server Update service does not work after the installation of KB2720211

  I have a Server 2008 SP1 32-bit Standard, which had the role of Server Update for the Windows software installed connected to a WSUS upstream server and everything worked, with 17 clients connected to him and get everything their approved patches.  It was a new server starting with WSUS added at this time 1 months ago.  He had to be upgraded to SP2 S2008 which I did and WSUS have continued to function.  After being on SP2, there was another 152 patches to be applied and after that WSUS does not work anymore.  It appears 1 patch that has been applied has been KB2720211 that seems to cause problems for a number of people.

  The problem is that the update service does not start.  An error message comes back that the service has not responded in a timely fashion and I can't find the log files anywhere on what it is.  Here is what has been done so far all that in the same issue:

  1 deleted WSUS and restarted and installed it again.

  2 Remove WSUS and Windows Internal Database, restarted and installed it again (using the download of KB972466).

  2.1 install SQL Management Studio and logged to an internal database SUSDB and checked it is not set to single user (I believe it is set for multiuser name but I'm going from memory)

  3. install the KB2720211.

  4. installation KB2734608

  5 remove WSUS and Windows Internal Database, restarted and installed it again (using the download of KB972466).

  I am looking for any information on how to solve what is the question, because there is nothing in the log files I can find and no event in the windows event viewer.  I am ready to start with the server however if there is something I can look at to possibly solve the problem, please let me know.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Bat button fn - b Audio does not work after the installation of Win 8.1

  I read here about what is a problem.  I tried about 4 things without success, so I am posting this!

  I have beats HP Envy edition 14-2166se laptop which works entirely 8.1 update Win and using the audio driver sp63555.

  Everything works including the audio beats program just cannot move to the fn - combo button b or to disable the function controller audio beats. Any help would be great!

  Hello

  In this case, try the following.

  Open windows control panel, open programs and features, right click on the "HP System Event Utility" entry and choose uninstall.

  Once this done, reboot the laptop and let Windows load completely for a few minutes.

  Then, download and install the software version of HP Quick launch on the following link.

  http://h30642.www3.HP.com/pub/SoftPaq/sp56501-57000/sp56929.exe

  When the installation has finished, restart the computer again and let Windows load fully before checking the key combination fn + b.

  Kind regards

  DP - K

• My internet does not work after the installation of El Capitan 10.11.3.  Help, please!

  I upgraded to El Capitan 10.11.3 tonight and now internet will not work.  I can't connect to the app store either.  I can connect to wifi but safari says "Safari cannot open the page.  Safari can't open the page "https. ' / / www.yahoo.com/.  The error is "the operation could not be completed.  Operation not permitted. (INSPOSIXErrorDomain:1) ' can someone help!

  Thank you!

  Hi SmilingDaddy

  Here are a couple of things to try. Here I am assuming you are using a wireless router?

  Open system preferences > network

  The name of your network appears in "network name"?

  Click on the button "Advanced...". »

  In the WiFi list, make sure that your preferred network is at the top of the list.

  Click on the TCP/IP tab and click on 'Renew DHCP lease'

  Now you have Internet?

  Try turning off WiFi, either in the same pane of network, or by clicking on the WiFi icon in the menu bar. Then wait a minute and put it back on.

  If you hold down "Option" key and click the wireless in the Menu bar, you can click on the 'open Wireless Diagnostics... '. "There is also info even before making it on the signal strength, etc... WD can give you help and additional information.

  Let us know if it works and if not, please give any info you can. Are you using WiFI? Are you using a cable/DSL Service? What model of iMac?

  Hope this helps, Greg

• Libretto W100 - 10 d - 3 G Module does not work after the installation of the system

  Hello

  I just reinstalled the software on my Libretto W100 - 10 d, from the internal HARD disk recovery partition recovery procedure.

  After the intervention, I have a clean booklet; all works well, except my 3 G Module is not recognized: the SW of Wireless Manager is not installed, and the 3G module does not appear in Device Manager more!

  It seems that the 3G module is not installed! of course before the recovery procedure, it worked like a charm!

  I suspect something has disabled the 3G module (usually something similar happens in the BIOS...)

  Can someone help me so that the 3G module working in return?

  Of many tanks and best regards

  Hello

  Have you checked the settings in the BIOS?
  To be honest I'm not quite sure if BIOS contains separate power switch or option Wlan 3G but you must absolutely check it m.

  To access the BIOS press ESC and F1
  Where would the BIOS contains 3 G or Wlan option, make sure that this option is enabled.

  Then visit the Toshiba UE driver page and download and install the Ericsson 3 G driver
  This is the driver for the 3G module.

• Internet does not work after the installation of updates

  From 2 updates (KB972270 and KB955759) internet wouldn't work once these updates have been installed.  I removed the updates and turned off the automatic update feature.  Periodically, I would try again but the same result.  I'm now 16 updates to download and I tried last night, but once again not Internet... even after manually loading all, but updates 2 above.  I want to keep my computer up to date but can't seem to solve the problem of the internet.  Is there a problem with the Microsoft updates?  How can I fix the problem, so I can update my computer?

  Open Internet Explorer (only) to http://windowsupdate.microsoft.com GOLD http://update.microsoft.com/microsoftupdate . Select CUSTOM and scan: are any of the updates other than KB972270 and offered KB955759?

  NB: If an update of root certificates is listed under the category of optional software updates on the left side of the scan results window, install it to enjoy greater security of IE8.

  If you choose not to install KB955759, you run difficulty he #50326 in http://support.microsoft.com/kb/954157 to protect your computer.

  Note: I'm not going to tell you it's OK do not install a critical security update. If IE crashes after installation of an update, something is wrong with your computer (e.g., an infection, one or several incompatible modules of the IE; a "horked" install IE8).

  If you install a security update & have a problem...
  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Office of creative cloud does not work after the installation of yosemite

  About 2 weeks after that I installed on my macbook pro 2013 yosemite I can't open the creative cloud Office. the logo is displayed for one second on the menu bar, then disappears again. Also the software CC I already installed (Indesign, Acrobat) seems to not work perfectly.

  I have already uninstalled and reinstalled the Manager of office with the same result. Now, I think about downgrading to the mavericks...

  Thanks for any help!

  SOLUTION. I had the same problem, after doing a cat from Adobe it came down to an app called Cooliris in Applications. Not sure yet what done.

  Deletion of it worked.

  Before that we went to the library-LaunchAgents, made a copy, call the old LaunchAgents and move these files.

  com.adobe.AAM.Updater - 1.0.plist and

  com.adobe.ARM.de23d1e3aa2d00ce38d73f10fcbdc8dcaaaf6be989610710a1ddda77.plist

  We did something with the LaunchDaemons as well, not sure, but it did not initially help. Just deleting coolers made

• Reference Dell OMSA - does not work after the installation of KB3161608

  I recently installed the last batch (June 2016) the MS updates on our servers.  It went well with the exception of two servers, both running Server 2008R2 and a PE2970, a PE2950.  These are our only two servers running server 2008R2.  On both machines, after installing all the updates, I was unable to open OMSA.  The browser will display "Internet Explorer cannot display the webpage".  OMSA continued to work properly on the rest of our servers, which are almost server 2008.

  I tried another browser, but that has not worked.  OMSA reached 7.3, so I downloaded and installed 7.4.0 and the 7.4.0.2 updated.  I found references to similar online, and some of the install OMSA fixes problems using the prompt, or "runas admin".  I installed them all over the place, but no matter how I installed it, I got the same result!

  I've not found errors in the event logs of the server.

  So I started uninstalling updates until I found the one who broke it, and it was KB3161608.  Uninstall this update fixed OMSA on both servers.

  This updates is listed as optional, so I'm not sweating it for now.  I believe that this is a certificate problem and could be fixed by creating a new self-signed server certificate, but this isn't really my area of expertise.  But I wanted to put this out there in case it might help someone else.

  In my tests, you should communicate the updates installed then OMSA will not work.

  KO 3161608

  KO 3172605

  KO 3172614

• LivePatch does not work after the installation of 2.18 MW

  Hello
  I just installed 2.18 MW. (BTW, the installation will fail if you are using a '!' tank in your system user password).
  I then created a customer. I've created a project yet.
  I clicked on the tab LivePatch because I want to reach 2.19 before I have create my project. The following errors below were posted. Can I fix it now? I have an aru_mw_r12_version.txt file (I have currently). I would like to know that my installation is valid/work/good.
  Thank you, Dean
  ----
  Checking Version LivePatch
  The current Version of LivePatch is 2.18
  Last Version of LivePatch is UNKNOWN
  A later version of the Maintenance Wizard is available.
  Run the phase 1 of the automatic LivePatch...
  LivePatch Phase 1 output
  
  ERROR: std.err has produced:
  tail: unable to open ' / Stage/patches/MWiz/aru_mw_r12_version.txt' for reading: no such file or directory
  tail: unable to open ' / Stage/patches/MWiz/aru_mw_r12_version.txt' for reading: no such file or directory
  [/ mwiz/oracle/mwizdb/10.2.0/eof/scripts/COMMON/auto_livepatch.sh[1596]:
  /mwiz/Oracle/mwizdb/10.2.0/EOF/log/INSTANCE_-99/get_from_url_.log: cannot create [no such file or directory]
  grep: /mwiz/oracle/mwizdb/10.2.0/eof/log/INSTANCE_-99/get_from_url_.log: no such file or directory
  egrep: /mwiz/oracle/mwizdb/10.2.0/eof/log/INSTANCE_-99/get_from_url_.log: no such file or directory
  grep: /mwiz/oracle/mwizdb/10.2.0/eof/log/INSTANCE_-99/get_from_url_.log: no such file or directory
  grep: /mwiz/oracle/mwizdb/10.2.0/eof/log/INSTANCE_-99/get_from_url_.log: no such file or directory
  [/ mwiz/oracle/mwizdb/10.2.0/eof/scripts/COMMON/auto_livepatch.sh[1596]:
  /mwiz/Oracle/mwizdb/10.2.0/EOF/log/INSTANCE_-99/get_from_url_.log: cannot create [no such file or directory]
  grep: /mwiz/oracle/mwizdb/10.2.0/eof/log/INSTANCE_-99/get_from_url_.log: no such file or directory
  egrep: /mwiz/oracle/mwizdb/10.2.0/eof/log/INSTANCE_-99/get_from_url_.log: no such file or directory
  grep: /mwiz/oracle/mwizdb/10.2.0/eof/log/INSTANCE_-99/get_from_url_.log: no such file or directory
  grep: /mwiz/oracle/mwizdb/10.2.0/eof/log/INSTANCE_-99/get_from_url_.log: no such file or directory
  [/ mwiz/oracle/mwizdb/10.2.0/eof/scripts/COMMON/auto_livepatch.sh[1596]:
  /mwiz/Oracle/mwizdb/10.2.0/EOF/log/INSTANCE_-99/get_from_url_.log: cannot create [no such file or directory]
  grep: /mwiz/oracle/mwizdb/10.2.0/eof/log/INSTANCE_-99/get_from_url_.log: no such file or directory
  egrep: /mwiz/oracle/mwizdb/10.2.0/eof/log/INSTANCE_-99/get_from_url_.log: no such file or directory
  grep: /mwiz/oracle/mwizdb/10.2.0/eof/log/INSTANCE_-99/get_from_url_.log: no such file or directory
  grep: /mwiz/oracle/mwizdb/10.2.0/eof/log/INSTANCE_-99/get_from_url_.log: no such file or directory
  [/ mwiz/oracle/mwizdb/10.2.0/eof/scripts/COMMON/auto_livepatch.sh[1596]:
  /mwiz/Oracle/mwizdb/10.2.0/EOF/log/INSTANCE_-99/get_from_url_.log: cannot create [no such file or directory]
  grep: /mwiz/oracle/mwizdb/10.2.0/eof/log/INSTANCE_-99/get_from_url_.log: no such file or directory
  egrep: /mwiz/oracle/mwizdb/10.2.0/eof/log/INSTANCE_-99/get_from_url_.log: no such file or directory
  grep: /mwiz/oracle/mwizdb/10.2.0/eof/log/INSTANCE_-99/get_from_url_.log: no such file or directory
  grep: /mwiz/oracle/mwizdb/10.2.0/eof/log/INSTANCE_-99/get_from_url_.log: no such file or directory
  [/ mwiz/oracle/mwizdb/10.2.0/eof/scripts/COMMON/auto_livepatch.sh[1596]:
  /mwiz/Oracle/mwizdb/10.2.0/EOF/log/INSTANCE_-99/get_from_url_.log: cannot create [no such file or directory]
  grep: /mwiz/oracle/mwizdb/10.2.0/eof/log/INSTANCE_-99/get_from_url_.log: no such file or directory
  egrep: /mwiz/oracle/mwizdb/10.2.0/eof/log/INSTANCE_-99/get_from_url_.log: no such file or directory
  grep: /mwiz/oracle/mwizdb/10.2.0/eof/log/INSTANCE_-99/get_from_url_.log: no such file or directory
  grep: /mwiz/oracle/mwizdb/10.2.0/eof/log/INSTANCE_-99/get_from_url_.log: no such file or directory
  LS: p *: no such file or directory
  CP: cannot create the file ' / mwiz/oracle/mwizdb/10.2.0/eof/log/INSTANCE_-99/get_from_url_-99_.sh': no such file or directory
  =====================================================================
  The phase 1 beginning of LivePatch to Wed Oct 10 14:13:31 EDT 2012...
  By using the existing LivePatch directory for log files: /mwiz/oracle/mwizdb/10.2.0/eof/livepatch
  Download the latest version of the Maintenance Wizard LivePatch.
  
  Runs the script to download get_from_url_ - 99_.sh in/internship/patches/MWiz
  
  ################################################
  
  ERROR - looks like ftp failed, see ls-l p\ * (see above) of EOF_PATCH_TOP
  EOF_PATCH_TOP = / stage/patches/MWiz
  Journal of session: /mwiz/oracle/mwizdb/10.2.0/eof/log/INSTANCE_-99/get_from_url_\*.log
  ===================================================================
  (1) ask the administrator trying to run the ftp script manually.
  OR
  (2) HOME/.netrc value, then try to Script: /mwiz/oracle/mwizdb/10.2.0/eof/log/INSTANCE_-99/get_from_url_-99_.sh
  
  Get_Patch_Updates utility to download p_R12_GENERIC.zip from updates.oracle.com
  ERROR: Could not download the latest patch to MW.
  Please download and manually it apply.
  =====================================================================
  ERROR! Cannot download the patch to updates.oracle.com.
  Please see /mwiz/oracle/mwizdb/10.2.0/eof/livepatch/auto_lp_26574.log for a more detailed error.
  =====================================================================

  You can use the manual method to download the livepatch.

  If you want to continue to resolve this with me that is fine also.

  Some time after the release of Maintenance Assistant 2.18, Oracle has changed how they connect to the server updates.oracle.com causing connections and downloads to fail.

  The solution is to 2.19 and this is the reason that the ftp was unable to download the patch. You could manually place the patch in the directory EOF_HOME/patch $. This should cause the tool to use the already downloaded patch and don't try to ftp the patch from the update server.

  Thank you