Satellite L670-1HD - problem with audio interfaces USB 1.1

Similar Questions

• Satellite L670-153: problem with a SONY 4 GB mass storage

  I have a portable satellite L670-153 with Windows 7 64 bit. When I conect a 4 GB SONY USB mass storage, Windows install the USB mass storage. But after a few minutes, the USB mass storage is disassemble and assemble and disassemble some indefinitely.
  I update the bios and the driver from the chipset, but I still have the problem.

  And what now?
  You can test the functionality with the other 4 GB USB key? Just to see if other brands will be recognized correctly. The problem when used on another PC with the same operating system?

  I have 2 SanDisk and 1 stick USB Toshiba and each of them are recognized properly on different laptops?

• Satellite L670 - strange problems with HDMI connection

  Hello

  I experience problems when you use the hdmi connection:

  My computer: Satellite L670

  Scope: Watch movies on the LCD external (sony bravia) via hdmi

  Computer param: Clone computer - screen plugged - features full power - the screen of the laptop has been set in order to let the computer works normally when closed.

  When you play a movie with the laptop open screen, no problems. I have twice the movie, one on the computer screen and the clone on my external LCD. Perfect.
  But if I close the laptop screen (which would normally have no effect), lagging behind the film on the external display. He stops each 5 seconds for a few seconds and leaves, making it unreadable.

  Did someone had such a problem? Any suggestions?

  Your help will be appreciated.

  If you need to know everything, just ask; (o)

  Thank you.

  When this happens you noticed more often and HARD disk activity flashing LED of the HARD disk on your laptop?

• Satellite P100-487: problem with audio drivers for Windows XP Home 3.11.0.51 - entered

  Hello

  I have problem with this audio drivers 3.11.0.51. The problem is that the output works perfectly but there is no entry.

  When can I expect from the good work on Toshiba support drivers?

  My way to have entry and exit works well is: first install 3.11.0.51 drivers from Toshiba site to install Support Intel 3.14.0.50 and do not restart after the installation. It's hard because every time when I restart the PC I have to for this making begin.

  Anyone have the same problem and found another job drivers?

  Thank you

  HI Supportneeded,

  You gave me the trick with the driver to resolve the problem in the next restart.
  And I replied to your thread Thursday evening at 20:30. Ask you Toshiba phone when we can expect new drivers. (I have a Satego P100-10F) I added a complaint of litte that Toshiba should also support a 'old' OS like XP. And after that at 21:00 the detachment was completely absent.

  Anyway, I tested some drivers of other manufacturers and other Chipsetdrivers, still the same problem.
  the sound with this material does not work on XP due to a rather bad.

  Of course, toshiba brings out a new driver that will feature at the end of February, but now it is March and I see nothing. (stop: a new driver for Windows Vista is online since yesterday)
  I had it installed on xp and the sound is completely down. Whether in - or output.

  you already called toshiba support when they expect our problems?

  Greetings

  [Edited by: admin on March 17, 2007 17:03]

• SL500, Windows 7: Problems with the interface audio external Firewire and Digitus USB KVM switch

  Hello

  I have an audio interface, Presonus Firestudio Project, which connects via Firewire to my Lenovo SL500. On the Sl500 is Windows 7 x 86 installed. I have also 2 rudders (Akai APC20 and M-Audio UC33e), 1 Midi Interface and a kvm switch connected via USB.

  Almost everytime I make music with Cubase or Ableton Live I get holes in my audio stream. Audio playback stops just freezes for 1-10 seconds and the surface of my DAW. This becomes especially annoying when I record.

  Recently, I have disabled all devices in the BIOS except for Firewire and USB, but I am always running into the same problem. Then I got a look at the system information for Windows 7 and the saw - problems/sharing section - USB and Firewire to share the same IRQ. I'm almost certain that this is the problem causing the audio gaps.

  Is there a way to chanmge in Lenovo Sl500 BIOS IRQ settings?

  Best regards

  belochim

  After Plug and install a USB audio interface that I borrowed from a friend, I noticed that whenever I changed my KVM switch to the surface of the other PC Ableton froze for a second. The audio stream on the other hand kept and just as it was supposed to.

  The KVM switch is a "Digitus Pocket 2-port USB KVM switch" model No. "DS-11402-1".» This KVM switch seem to be a kind of diffusion in the USB bus which then interrupts the audio stream running on Firewire.

• Satellite M40-307: problem of Audio with USB (pc--> hifi) link

  I have a Toshiba M40 - 307 for a month and a micro stereo system (Philips mc-M570).

  I can link them with USB direct connection to hear the sound from the speakers of Philip pc.

  Only problem: I have several intermittent workers during each session sounds acoustic (movie, game, mp3...)
  I tested it with two other PCs (NEC e DELL) and I didn't have any problem.

  Do you know where the problem may be? USB?
  Thanks for all your replies!

  Hello

  I put t know if this link will help you, because this link contains information on a W2k, but it seems like it might be a Microsoft driver problem.
  http://support.Microsoft.com/default.aspx?scid=KB;%5BLN%5d;817865

  I would recommend to google a bit.

• Satellite Pro C650D - problems with the audio and game controllers

  Hello

  I recently had problems with my microphone and speakers/headphones and game controllers.
  Sometimes the microphone stops working when on Skype, for example, but most of the time works fine, once again, when I restart the pc.

  Stakeholders sometimes still work when I connect headset.
  Some of the sounds are still coming through the speakers while some coming through the headphones.

  I have a usb game controller which also did not work everything properly.
  If I assign buttons in the program that they do not work in the game.

  All these devices are in Device Manager in a group that makes me think it's sort of annoying update doubtful that messes with them.

  Any body have similar problems or know what to do better?

  See you soon
  Laurin

  Hello

  Can you please send some details on the laptop model and the system you are using?

  With regard to the issue of sound/mic:
  > The microphone sometimes stops working when on Skype, for example, but most of the time works fine, once again, when I restart the pc.

  Are you talking about internal microphone or external? This only happens using Skype?
  In your case I would test the microphone using different applications to make sure that is not a Skype related issue.

  > Yet sometimes the speakers work when I connect headset.
  I recommend this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=65295

  The user has had a similar problem, but this phenomenon was linked to the Realtek HD Audio Manager settings.
  She wrote:
  + In the upper right corner, there is a small yellow folder called "Connector settings" in my version. +
  + There, finally I could re-enable the setting "enable popup dialog box, when the unit is plugged. +

  + So now when I plug an external speaker or headphones, it appears, and I select the option "helmet" (instead of "line-in"), and then the sound only through the headphones/ext.speaker.+

  Regarding the game controller:
  > I have a usb game controller which also did not work everything properly.
  > If I attribute buttons in the program, they do not work in the game.
  I put t think its problem of laptop in my opinion, you must make sure that the controller is compatible with the games you play and also recommended to check some info provided by the manufacturer of the game controller.

• Satellite L670-143 - problem USB or midi

  Hello

  I have a Toshiba laptop with 64-bit windows market 7.
  I recently bought DJ Mixer with midi control an allen and heath xone db2. When I connect it to the usb port it works for a minute and then stops working. I tried all usb ports and have the correct driver installed, but nothing works.
  Next to the mixing table, I have a midi controller allen and heath xone k2 and it works fine on my Toshiba laptop.

  I also have another laptop (Medion) as well as the works of mixer on this laptop, so the unit is not broken.
  Anyone got an answer to my problem.

  Just a question: do you have other problems using the USB ports?
  I mean other USB devices are working properly?
  If you have any other problems using the USB ports in connection with other USB devices, I don't think this problem is related to the laptop.

  However, it may still be a compatibility problem between two devices, but in this case, you should check out midi mixer manufacturer page for some details.

  In my opinion, you should check if you have installed the software correctly.
  I read the XoneDB2 manual and it mentions some important details (installation of PC page 28).

  1. connect the XONE:DB2 your grid and turn on.
  Do not connect the DB2 to the PC at the moment.
  2 open the Drivers folder and run Setup.exe.
  3. Select your preferred language
  4. Select install driver
  5. When prompted, connect the DB2 to the PC with the USB cord.
  6 If this window appears, select Install.
  7 the USB driver will now install.
  8 If this window appears, select Install.
  9 restart to complete the installation.

  + The installation process may differ slightly depending on the operating system and +.
  + Security software. +
  + * Note: * always use the same USB with your XONE:DB2. When installing on a MS +.
  + System Windows, drivers will be involved through the USB port to which you are currently connected. If you try to use the DB2 with a different USB port, or without having to install drivers at all, the system can operate but with degraded performance (XP, Vista, Windows 7), or may not work to +.
  + all (2000) +.

  + * Driver Installation check * +.
  + Once the driver installation is complete, you will need to check that the XONE:DB2 is recognized. Connect the XONE:DB2 to your PC/laptop and then right-click on my computer and select manage. Then select the Device Manager in the left window. Expand the section sound, video and game controllers to reveal the WDM audio and MIDI for the XONE:DB2 drivers. Expand the Bus USB controllers section to reveal the XONE:DB2 ASIO driver and its version (version) in this case number V2.9.31. +

• Problems with audio/video streaming with USB devices on zero clients

  Hello:
  We are using view 6.1.1 in our environment and problems getting audio/video streaming to work well with the USB headsets, with zero customers.  Helmets are Jabra Link 360 and customers zero Samsung NC241.  Helmets are used as well for the phones to Jabber and also as audio device by default.   We started with the audio driver Teradici and everything seemed to work well, except that users could not answer calls on the headset itself with the button on the headset.  They were able to answer the calls of Windows though and the part worked fine.  In order to get the physical button to work, we had to first fill the USB receiver they use on the zero clients so that Windows will see as the device Jabra 360 and not the audio device Teradici.  Then we had the EHCI USB mode on them as well, and after that he started to work very well.  However, the helmets also serve as the audio device main as well as the communication (phone) device, with audio streaming continuously throughout the day.  With the current configuration, audio streaming will cut in and out during the day, and audio/video is not always to stay in either phase.

  I also applied the registry in this KB hack, VMware KB: improvement in audio quality when you use speakers or USB headsets with a desktop VMware view Horizon 5.2 , which helped clear up Crackle that we originally with the part phone headsets.  But there is still the issue of streaming audio.

  I wonder if the effectiveness of the bridging USB is not as effective and also is there a way to make this work better?  I read that the use of the pilot Teradici is supposed to help with audio/video problems, but do not know how that can be applied to USB devices as we use.  I've been reading upward on Teradici audio/video settings, but do not know where to go from there.  I was hoping that there are some best practices to use USB headsets with a view, but so far I'm not finding anything useful.

  For any help or suggestion would be greatly appreciated.  Thanks in advance.

  We were finally getting help by the people of Cisco after validation in the here and even open a support ticket with VMware, which was open for more than a month without will.  Where others try to implement similar, here are our findings:

  • Zero clients combine traffic USB and PCoIP.  It is not good when there is a lot of audio/video/USB traffic, especially the USB headsets that also carry audio softphone.  In our case, the USB traffic was so dense that it was causing audio and video become troubled and freeze and eventually cause the pcoip_server service to break in the virtual machine itself and cause the client disconnect.  The fix?  Don't use customers zero with USB phones software, they are not just designed for this type of solution.
  • Thin clients are much better designed for USB softphones.  In our case, we used the Cisco VXME client, which is the method of support for the use of Windows thin clients with the client of the Horizon.  There is integration between the two products that isolates the VOIP traffic out of the virtual machine and keeps it local on the client itself.  Regular audio and video traffic still go through the virtual machine using Teradici or VMware RTAV driver.

  Hope this helps others who may run this question.  One thing we did not try was a wired headset using the AV sockets on the zero client and Teradici audio driver.  This can work, but our needs here were the headphones must be bluetooth, so we were forced to stick with USB.

• Satellite M70-190 - problem with USB

  Hello!
  After you uninstall Windows XP and BIOS update, I have a problem with the USB ports. My work does ' t of USB flash drive. Windows also find a USB flash drive, but I can't find it in "my computer".
  If anyone idea about this problem?
  PS, External HARD drive works perfectly, as the USB mouse and USB WiMax modem.
  I m hoping someone out there can help with this problem.

  If I understand you well you don't have problem with USB port, but with a single USB device. Right?

• Satellite C660-1PH - problem with Chicony USB 2.0 camera

  Hello.

  I recently purchased satellite C660-1PH and I have a problem with my webcam. When I use Skype the image of me is blurred.

  Any ideas? I looked fot the webcam settings and these are all the default ones.
  What do I have to uninstall and reinstall the drivers from scratch?
  Lia

  Hello

  * @ economid *.
  How did solve you this?

  In my case, the protective film has been mounted on the front of the cam.
  I removed it and the photo quality was much better.

• Satellite P300D-14F - problem with USB

  Hello

  I want to make a USB to boot, but the laptop does not recognize (I mean in the bios)

  For example, when I connect the external hard drive (1 TB, Hitachi HDT721010SLA360) I can see it in the Start Menu (http://s017.radikal.ru/i432/1202/20/b7b7edd221f9.jpg)

  But when I connect my USB drive (Transcend JF V30 / 4Gb, JetFlashTS4GJFV30) I have not even USB option in my Menu of Boot (http://i021.radikal.ru/1202/67/6bae3812f88c.jpg)

  Have problem in my USB?
  If so, could you please tell, what are the usb key properties must work properly, so that I could do the usb startup key.

  P.S.: on the first time 1 TB of HDD and USB connected photo (also connected SAMSUNG HD501LJ 500 GB), the second peak connected the USB _only_

  Hello

  To my knowledge, it there has not of special requirements to the USB flash key, a common USB should be recognized correctly as boot device.

  Of course, it might be possible that there is a problem with your USB key
  On the other hand, it might be possible that your USB drive is not formatted correctly.

  I think you need to format the Flash DRIVE to FAT32 standard and need to make it bootable.
  If this does not help, try another USB flash memory.

  Good luck

• Problem with audio on laptop Toshiba Satellite C855D-S5232.

  .. .lately I had ALL sorts of probs with audio... first helmet to quit smoking, has no longer recognized and now external speakers work not and embedded speakers continue to play static. Can you help me?

  Download and install the latest driver 'Sound' on the Toshiba support site:

  http://support.Toshiba.com/support/modelHome?FREETEXT=3386622

  J W Stuart: http://www.pagestart.com

• Satellite L500-01u012 - problems of audio output

  I have a Toshiba Satellite L500-01u012 and I have problems with the audio output.
  When I plug a headphone or audio output in the audio output port, it does not neutralize the internal Laptop speakers.
  It's really annoying me and I wonder if there is a way around this?

  I have windows 7 Home premium 64-bit sp1 with all the latest patches to update, and I tried to remove, restart and then reinstalling the driver several times without success
  I also got the image of the plant cell to try to fix that and its still nto work.

  I downloaded the drivers from the toshiba support site, but they did not help

  Hello

  Is this something new or you have noticed this problem in the past too?
  Generally by default the internal speakers should be turned off when you connect earphones.

  I put t know what laptop do you have exactly (model number you wrote may not be the right) and what sound card is inside, but please check the audio options in the Panel.

• Satellite U400-PSU44E - problem with XP drivers

  Hello
  I have the Satellite U400-PSU44E. It was the Vista Home Premium pre-installed spirit, but I had to install XP Pro.
  Under XP I have problem with installing the drivers. If I try to install driver sound I get info that the media is not found, even with the modem driver. I tried to install the electricity utility of Eve - in the last step of the installation, I get an error, and this error ia´m getting always ia´m try to uninstall this version adding utility / Removo programs.
  HARD drive protection utility I also install the Cana´t - I Dona´t don't know if this feature is supported in my Toshiba, but if this pilot is being Satellite U400 PSU44E I think it should be.
  ChipSet drivers and BIOS I installed as the first.
  I downloaded only the drivers from the web site of Toshiba (ce.computers.toshiba...) for win XP.

  Any suggestions?
  Please, please, help me!

  PS: is there some suggested order of installing the drivers for this model?

  Post edited by: helpfinder

  null

  Hello

  I n t have U400 cannot say much about it, but if you want to have good facilities order here it is:

  1 Windows XP Service Pack2 (RTM)
  2 Service Pack2 (RTM) VALUEADD folder
  3 SUPPORT Service Pack2 (RTM) folder
  Microsoft Internet Explorer V6.0 (SP2) 4
  DirectX V9.0c 5 (SP2)
  Windows Media Player 10 V10.00.00.4036 6
  7 Windows Movie Maker V2.1.4026.0
  Module 8 SLP OEMSLP2.0 (523759)
  9 Microsoft .NET Framework V1.1.4322 (SR1) V1.1
  10 Microsoft .NET Framework V2.0 V2.0.50727.42
  11 Sun Java 2 Runtime Environment V1.6.0_03
  Module of Chipset Intel (r) 12 V8.3.0.1014
  13 Intel iMSM Driver V7.8.0.1012
  14 Intel Crestline-GM / UMA Driver V6.14.10.4096
  or
  14 AMD M82XT /M86 Driver 8.452.2 - 080130 a-059240C
  15 Conexant CX20561 Audio Driver V3.47.1.0
  16 Marvell 8040/8055 LAN Driver V10.51.3.3
  17 Synaptics Touch Pad Driver V10.1.7.0
  18 Alps Touch Pad Driver V6.0.305.11.1
  19 V7.70.00.00 Conexant Modem driver
  20 modem region Select utility V2.2.3.2 (RST223MAC02)
  21 Golan/Kedron Intel Wireless LAN Driver V11.5.0.32 for XP with cat
  22 Intel Proset utility for XP V11.5.0.0.3
  23 Atheros Wireless LAN Driver V7.4.2.75
  24 Atheros Client Utility V7.0.1.70
  25 Realtek RTL8187B Wireless LAN Driver V5.1116.1226.2007
  Camera Chicony 26 V6.2.238.1217 software
  Bluetooth Stack for Windows by Toshiba V6.10.02T 27
  28 TOSHIBA SD Memory utilities V1.8.1.1
  29 Authentec AES1610 Fingerprint Utility
  Toshiba TrueAcess Manager Suite V7.9.0.4 (20080229)
  V2.00.01.00
  30 TOSHIBA ConfigFree V5.90.08
  31 TOSHIBA help V1.03.00 upd4
  32 TOSHIBA Speech System V1.00.2514
  33 CD/DVD Drive Acoustic Silencer V1.00.008
  34 Toshiba HDD Protection V2.0.2.3
  PC Diagnostic TOSHIBA 35 tool v3.2.6:
  36 TOSHIBA Touch ED V3.0.1.0
  TOSHIBA Hotkey Utility V3.0.1.0 37
  V3.0.1.0 utility TOSHIBA 38
  39 TOSHIBA Control Utility V3.0.1.0
  40 Toshiba Power Saver V7.04.02.Q
  41 Toshiba zooming Utility (smooth view) V2.0.0.24c

  Install all the necessary stuff following this order of installations.

  Please send comments.
  Good luck!