Satellite L670-1john crashes during startup when HDD Stor.e Alu is connected

Similar Questions

• Satellite L670-1john - activity of fan and temperature

  Hello

  When my Satellite L670-1john is not in standby mode and when no application is running (only OS) with an ambient temperature 20 ° C temperature wich about must be the processor?
  At what temperature fan start and stop?

  Feeding method chosen is normal with the optimization of the performance, the AC adapter.

  Thank you

  Hey,.

  Why is it important for you? You have problems with the temperature?

  The activity of the fan will be controlled automatically. Everything you can adjust change cooling method in Windows power to optimised battery management.

  By the way: here's a similar thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59683&TSTART=0

• Satellite Pro A110 crashes during the transfer of the large data in LAN

  Hello

  My Satellite Pro A110 crashes during the transfer of the large data in LAN. The network driver is a Realtek RTL8139/810 x Family Fast Ethernet NIC I've been looking through this forum and found some wire whit exactly the same problem, saying that the solution is to update Realtek lan set up in BIOS, not the computer BIOS, but I can't find any link to download the necessary upgrade file. Can anyone tell me please where to find this upgrade file or send it to me directly?

  Thanks in advance

  Is - this transfer of data in the company where you work? Do you want to download data from the server, or how to understand this? How to understand what you mean under big data?

  Have you tried downloading data on the Internet? For example, if you try to download some trailer HD (more than 200 MB)?

• Satellite Pro A100 crashed during Windows BIOS upgrade, now does not start.

  Satellite Pro A100 crashed during the upgrade of the bios from windows (upgrade the bios using windows), now the laptop will not boot. I press the on switch and it gives me just a blank screen, so I think that resets itself. I really need help solving this because I have a University paper due in the next few days and I need my laptop!
  Close for any help.

  It's a scream! :_| : O

  This looks like a damage ROM module!
  How did you do the BIOS update? I have red in this forum that a wrong procedure or wrong BIOS can damage the motherboard.

  I think that it s a deal. I put t know if it s needed to change the entire motherboard or update the BIOS again but I n t think you will be able to do it yourself.

  I think the best way is to ask the Toshiba service partner in your country.
  I think they'll give you more details on the handling of the Fryer

• p6710f, crashes at startup when installing 2 Cruzer of Sandisk USB flash drives

  Hello

  Question: My HP p6710f desktop computer crashes at startup when 2 Sandisk Cruzer USB drive (8 GB/FAT32, a 16 GB/FAT32) is installed in a hub Targus USB2 multiport (connected to the back USB port of p6710f).

  With USB flash drives installed, from a market boot: Boot past the BIOS (blue) screens, then 'underline' cursor blinks just on the black screen and hangs.  It does not start a Win7 from the hard drive.

  With USB flash drives installed, from a bunch of market: If in the (blue) BIOS screen, I hit the ESC and select the hard disk device (which is the top of the "boot device") then boot proceeds normally and boots Win7 from the hard drive.

  If I do the trunk with the key removed USB, the boot process proceeds normally and starts Win7 disk.

  I have flashed to the latest ROM system from the support page of p6710f.  Who really seemed to solve the problem for a while, but the hook finally reappeared.

  I copied all the data on USB flash drives, formatted their 'rapid' and copied all the data back.  No joy.

  Here is a link to the Sandisk Cruzers.  I deleted all the files on U3/etc. out of them, I want all of the space available on them for auxiliary data storage, I can't boot from them:

  SanDisk Cruzer

  Thanks for any help,

  -Gary K

  Hello

  Probably of the order of startup in the BIOS has been set to use the USB is/is the first choice. Please, move them down. Here's how:

  http://support.HP.com/us-en/document/c00364979

  Kind regards.

• Photoshop CS3 crashes at startup when it comes to the 'TWAIN menu construction' article

  My copy of Photoshop CS3 crashes at startup when it gets to the "construction of the TWAIN menu items' section.  What can I do to fix this?

  Hello

  Please visit this thread to duplicate Photoshop CS3 Extended Crash at startup.

  Let us know if this helps

  ~ Assani

• Satellite A210-15Y crashed during the update of the bios

  The worst case has happened and the laptop computer crashed during an update of the bios. I know that there is the possibility to repait the bios with a tool of recovery from crisis. For this purpose you have to press 2 keys (in most cases FN + B or Win + B) during the connection of the supply cable and the next start. I tried many books, but nothing happened. Can someone tell me the keys on which I have to press a 210 - 15Y satellite and maybe where I can get an image of cd of the tool of the crisis, because the laptop does not have a floppydrive?

  Hello

  As far as I know that the BIOS crisis procedure may be crazy by a technician of the ASP.
  You can not download a version of traditional BIOS who can update the BIOS from a USB FDD floppy.
  You can download only focused on the victory of the BIOS that can be run so that windows operating system is running.

  In my opinion, you should get in touch with a local ASP!

• Thunderbird crashes on startup when turned on lightning. RESOLVED itself after windbg. Weird!

  I have used Thunderbird with the addons of lightning for a long time without any problem. Almost 1 month however, Thunderbird crashes on launch when lightning add on is enabled. I have restarted Thunderbird in safe mode several times and restarted with all add ons disabled. Thudnerbird works fine then. When I activate the addons one by one, custody of Thunderbird works up until the point I have activate lightning.
  I've left Thunderbird it is gel for an hour, but still there is no way to get the program to start working again (except reboot with all the add ons disabled). I use the newest Thunderbird with the latest version of lightning on a system Windows 8. I hope that you will be able to help me.

  Please post your crash IDs.
  See https://support.mozilla.org/en-US/kb/mozilla-crash-reporter#w_viewing-crash-reports for instructions

• Satellite L670-1john - difference between versions of BIOS

  My laptop bios version L670-1john is 1.9, download, bios '2.10 - WIN. "

  What is the difference between the versions?

  It is necessary to update my bios?

  I put t know what the difference is, but if your laptop works well and you don t have any problem with it, don't update anything.

  Touch Don t well running system!

• SpeedGrade 20141 crashes at startup when dual monostable display is enabled

  Just updated to Speedgrade 20141 and I got the message "Adobe Speedgrade 2014 has stopped working" immediately after the splashscreen.

  After that I uninstalled and reinstalled it, it worked fine. So, I loaded my custom settings and did a ranking. After trying to start again later, he crashed again. Another reinstall solved that, until the next boot after that and so on.

  I troubleshoot-made the problem and determined that Speedgrade now would crash at startup, whenever I would have to the dual display output on. If the dual display output is disabled, it starts normal without crashing. Since it is a standard installation without whom I can not grade, it is a major disappointment.

  It wasn't a problem with the original version of 2014.

  My system:

  Windows 8.1

  Intel i5 2500 k

  ATi R9 280 X 14.9 WHQL @Catalyst

  16 GB OF RAM

  I have my second monitor connected via HDMI.

  Thoughts?

  BTW, I like usually the update, especially all the great new features in the Official Journal and DirectLink improved and more robust workflow.

  The issue has suddenly disappeared, I can now start Speedgrade with output double display. No idea why, I wouldn't change anything.

  in any case, that's all. Thread closed.

• Satellite L670-1john - recovery Will HDD work if I leave the D partition?

  My laptop is L670-1Jn

  On my drive C: is installed windows
  On my drive D: is installed HARD drive recovery

  With windows 7 I want to create a new partion E: on my D: drive
  The E: partition will be reserved for my data.
  Once create E: partition I want to do a picture disc C: and D:

  Serious problems:
  first I used first HARD drive recovery
  If that doesn't work I'll bring disk C: and D: images

  My question is: HDD recovery works if I create a new partion E: on my D: drive?

  Hello

  To be honest, I've never tested it, but I think that you should be able to use HARD drive recovery, even if the partition D has been changed, but that's just my opinion.
  So before you change anything on the HARD drive, I recommend you create the recovery disk!
  The recovery disc helps you define the laptop (and also HARD drive) back to the factory settings if anything went wrong with the HARD disk or similar

  With recovery disk, you are on the safe side you know
  I think you can run a series of experiments after the recovery disk was created.

  Please share your experience with us, I m very interesting.

• Satellite Pro L100 - Crash during the update of the Bios

  Hello

  I am the owner of a Satellite Pro L100 (PSLA4E)

  On the Toshiba site I downloaded the BIOS update. While installing I read that it was necessary to supply cable is plugged. Before I could cancel for the cable, he had started and then frozen. The computer stopped working and so I turned it off! Since then, I've read that it was a very big mistake!

  When put on the fan starts and I can hear etc cd drive spinning. After 15 seconds, the screen is blank, the computer starts beeping!
  Is there a way to solve this?

  Thank you very much
  Rich

  Hi Richard

  Seems not good buddy from your description, that something went wrong during the update procedure and now the ROM module has been flashed properly.

  Maybe you area lucky man and the motherboard isn't too bad, but only the Rom module must be flashed again.

  Unfortunately, this must be done by the technician of the ASP. You will need to contact the ASP in your country for assistance.

  Good luck and have a nice day

• SQL-Developer EA3 crashed during startup

  Hi, I start sql-developer on my Ubuntu 13.04 and it crashed with errors:

  "A fatal error has been detected by the Java Runtime Environment: SIGSEGV (0xb) at...".

  Version JRE: Java (TM) SE Runtime Environment (7.0_45 - b18) (build 1.7.0_45 - b18)

  "Java VM: Java hotspot 64-bit Server VM (24, 45 - b08 mixed mode linux-amd64 compressed oops).

  I tried "ulimit unlimited-c" before starting to enable writing core dump.

  But if I run sql-developer as the user root, then it start normally, so I suspect it's insufficient privilege when I start with normal first time user. I changed the owner of sqldeveloper & Java to myself, but it didn't work (which was owned by the root previously).

  I do not know how to analyze the dump or the error log file created during the accident, but I don't want to start it as root user. Thus, anyone who can give a solution would be appreciated.

  There are a few related threads when SQLDev running as root "solved" the problem on Ubuntu... looks like the final solution came down to this

  unset GNOME_DESKTOP_SESSION_ID

  Try this, or search the forums for the other 2-3 threads around this topic.

• Preview crashes during startup by clicking on an image

  If the preview is already open, it works fine. If it is not open and I double click on an image of that overview hangs when it attempts to open. The image is configurΘ for dΘmarrer with preview. Here is a part of the accident report:

  Process: Preview [1741]

  Path: VOLUME/Volumes/_CCC SafetyNet/*/Preview.app/Contents/MacOS/Preview

  ID: com.apple.Preview

  Version: 8.1 (877)

  Generation information: Preview-877000000000000 ~ 8

  Code type: X 86-64 (Native)

  Parent process:? [1]

  Responsible: Preview [1741]

  User ID: 502

  Date/time: 2016-07-28 23:30:42.615-0400

  OS version: Mac OS X 10.11.6 (15 G 31)

  Report Version: 11

  Anonymous UUID: D7B9B2AF-FF35-14CC-5D70-918AFE0C4A2E

  Time since started awake: 28000 seconds

  Integrity of system protection: enabled

  Crashed thread: 0 dispatch queue: com.apple.main - wire

  Exception type: EXC_CRASH (SIGABRT)

  Exception codes: 0 x 0000000000000000, 0 x 0000000000000000

  Note the exception: EXC_CORPSE_NOTIFY

  Request for clarification:

  Reason for termination due to an untrapped exception 'NSInternalInconsistencyException' app,: "unable to load CommonToolbar.proplist.

  ending with an exception uncaught of print type

  Abort() called

  Any suggestions?

  Hi, nealt2!

  Thank you for using communities Support from Apple. After reading your post, I understand that if you try to open an image with preview, the application will close unexpectedly except if it is already open. I use Preview to view the pictures quite frequently, so I know it is convenient to simply double click on an image and open it automatically - I'd be happy to help you with some troubleshooting you can try!

  My first recommendation is to stop the preview application, then re - open all holding the SHIFT key. After you have done this, you can exit the application again and try to open a file with a double click.

  If the app still unexpectedly quits, try restarting your Mac using the menu  Apple in the upper left corner of the screen and selecting Restart in the drop-down menu, if you have not already. Once the Mac boats back, try to open a picture.

  The next thing I would say if you still have problems for the application to open by clicking on an image file would be to restart the Mac in safe mode and try to open a picture there. The article below will give you more information about the safe mode and how to enter if you're not familiar:

  Try safe mode if your Mac does not end commissioning

  Even if the title of the article is not specific to your situation, safe mode is always a good step to take. He runs a system check when you start and also disables some software that may cause a conflict. Take note of the results you will find trying to open an image in safe mode, and then restart the computer and try again.

  If your preview application still quits unexpectedly, after having tested in safe mode, the next step that I recommend is setting up a new user account and trying to open a picture it. The following article will allow you you know why test in a different user account can be useful and help you create a new account if you need assistance.

  How to test a question in another account on your Mac.

  See you soon!

• Satellite Pro A60 crashed during the update of the BIOS

  Updating to BIOS ver 1.70 to 1.90 (from Windows XP) my Satellite Pro A60 off without any warnings. After about 5 minutes of waiting I went it. And... computer just several beeps and stops again.
  Anyone has idea what it means? Is it possible to turn it on again?

  Hi Vladimir,.

  I suspect that your BIOS is damaged when your A60 turns off. Unfortunately, this means you A60 are a failure now his POSITION leading to generate failure codes series.

  As Felix said codes tells the Toshiba Service Agent exactly what the problem is so you will need to contact them for assistance.

  HTH