Satellite L670 - after Win 8 upgrade WIFI does not work properly

Similar Questions

• Satellite L500 - after Windows 7 upgrade games does not work in mode full screen

  Hello..

  I just received my upgrade to windows 7 in the mail and I installed it and all is well...

  But if I run a game that is not in the same as the computer screen resulution is a square in the middle of the screen and it is two big black lines down on each side. It does not put the game in full screen. The games in the same resulution works very well.

  Some games may be put to the resulution have this computer.

  How can I do then come in full screen?

  Thank you

  Hello

  Have you tried to update the display driver? Maybe you have an older version that is not fully compatible with Windows 7. Just check the Web from Toshiba site to get the latest version:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Normally for mode full screen in games you choose the native screen resolution of your screen there.
  Check this box!

  And it would be interesting to know in what games this problem exists

• Satellite A110-906 - Win XP Pro Installation does not work properly

  Dear all, good day!

  I bought a new laptop model Toshiba Satilite A110-906. I want to install windows XP Professional with my CD under license, but I get error after installing copyiny files.
  The error is blue appear with hardware problem.
  PCI.sys error
  When I install Vista, it works fine.
  Any help will be much appreciated!
  Thanks in advance

  Raja

  Don't forget that your original CD of Microsoft Windows contains all the hotfixes and service packs 1 and 2.
  You can use a "nLite" application to create this CD with all updates

• Satellite P200 accidents + message: graphic card driver does not work properly

  Hello

  hope that this issue has not been covered before, but I've owned a Satellite P200 for 3 years now, and this week, it crashes all the time.

  When it started going down he gave me a few messages in the sense of "your graphics card/driver does not work properly and windows will be arrested to avoid damage.

  It has progressed to the point where now when I turn it on, I have vertical lines running down the screen and the screen flashes on and outside. Within 20 seconds, it restores the BSOD - 'there was a problem and windows will be arrested. Error Page_Fault_In_Non_Paged_Area"then stops.

  I ran a system restore but the problem remains.

  I have a feeling that my graphics card is toast. Is this good? Are there any other options to try? Thanks in advance for any answers.

  Matt

  Hello

  Sounds like the GPU problem.
  But try the graphics card driver update.
  Use the most recent driver for your graphics card.

  In addition, clean the fans of portable computers.
  Dust and debris could prevent the cooling fans to turn with the best speed and this could lead to a higher temperature which would lead to overheating.
  Use a jet of compressed air. I also use it and it helps to get rid of dust and debris.

  If this is not enough, then a problem of graphics chip would be possible.

• After that insert update trigger does not work properly

  Hello experts!
  
  I created an insert/update trigger after and what strikes me is that it does not work as expected.
  The trigger starts a procedure that performs an insert in a second case of changing values table triggered table ("my_table").
  
  The problem is that in my second table values, which are correlated to the "my_table", are not changed by the correct values immediately. The trails of the trigger and insert!
  
  I need to update two times to values appear in my second table. Then only the data of the first update will be inserted in the second recital to table the table parent ("my_table") held the most recent values.
  
  Do you have an idea what could be the problem?
  

  create or replace
  trigger myscheme.after_update_insert_set_tw
   after update or insert
    on myscheme.my_table
    for each row
    
  declare 
  
  begin
  
   pr_my_table_tw_sync_sk(:new.lng_falle, :new.int_fallennummer, :new.lng_schaedling, :new.objectid);
  
  
  end;

  Brgds,
  
  SEB

  Remove the pragma autonomous_transaction and validation of your relaxation. This might be the reason. The transaction autonoumous cant properly consider the values of the current transaction (which is not engaged yet).

  This is not logically (if the upgrade fails or is rolled at the time you do not want the inserted row).

  If you then get a problem because the mutation of tables, you will need a different solution: an autonoumous transaction is not the right solution to workaround.

• Satellite Pro A300: Win 7 Upgrade DVD does not list my laptop model

  I bought a Satellite Pro A300 that came with Windows Vista pre-installed on it. I was offered a Windows 7 Uprgrade for 30 by Toshiba that I bought and got 2 discs:

  (1) Windows 7 Upgrade disc
  (2) Toshiba Win7 Drivers Upgrade drive

  I have updated successfully however the drivers Toshiba disk does not list my model of laptop. I tried to install the drivers on the disk for the OEM software such as drivers of web cam (which are not available online), but they do not work. Also now my DVD player does not open and I can't view the contents of the disc?

  Can someone advise who I come into contact with to get a drive for my laptop model?

  Hello

  What model of laptop do you have?

  Have you tried to choose another model instead of your laptop model?
  Do this!

  I read about a similar question here in the forum and the user could solve this choose another laptop model number.

  By the way; all Win7 drivers can be downloaded from the page of European driver from Toshiba:
  http://EU.computers.Toshiba-Europe.com

  See you soon

• After updating IOS 10 wifi does not work on my iphone anymmore 6

  IPhone 6 c

  IOS 10

  after update Wifi makes connections but wifi symbol disappears immediately after the connection.

  functions of the iPad without problems. Reset hardware doent change the problem.

  What could be the problem.

  You must first check your Wi - Fi router: check if other devices can be connected. This will let you know if there is a problem with your Wi - Fi router. You can restart your router and restart the connection to WiFi.

  Make sure that Wi - Fi and you can see your network

  Go to settings on your iPhone > Wi - Fi and check if it is enabled. And if there is a blue check mark next to a network name means that your iPhone or iPad was connected to this network.

  Restart your iPhone/iPad, router, cable/DSL mode

  If this does not help, reset your network

  On your iPhone, iPad, got to settings > general > reset > reset network settings. This will reset Wi - Fi networks and passwords, cell parameters and VPN, and APN settings you used before.

  These measures should help.

• Satellite A100: After OS reistallation FN keys does not work

  I recently bought a satellite a100 in Germany. Since I put on the English version of win xp I can't use all the function keys. I can't use the multimedia keys on the left. also, I can't change the screen brightness by using the function keys.

  does anyone have a solution to my problem

  Hello

  Visit the Toshiba driver and install all the drivers of Toshiba in the right order.
  Please note that there are different series A100. Choose the right drivers!
  Please see also the installation instructions if available!

• Satellite L40 - Wifi does not work properly

  Hi, when I want to connect my L40 to some network close to home, don't go or Walker it connects, it is said that my access is limited don't work or are in need of a network address, something like that... is the problem with my laptop, or something else?

  THX

  First of all, you should check if the WiFi signal is strong enough.
  I guess you want to connect to that you have the router WLan ;)

  However, more you must update the WLan, then BIOS card driver if they are available.

  Please post your results!

• Satellite Pro P300-1FQ - wifi does not work properly

  Win Xp installed, the wireless guard stop and start.
  I've read the threads and I need to make a Bios Update.
  Click on the link to download it, but get a blank page.

  Is there another place I can get it?

  First of all, I would like to try other workarounds first before trying to update the BIOS.

  I recommend updating the driver WLan first!
  The laptop seems to be to use the Atheros WLan card.
  You can download the driver Atheros here:
  http://APS2.toshiba-tro.de/WLAN/?page=downloads

  In addition, you must turn off the WLan to save energy.
  This can be done in power management Win 7!

  Then go to Device Manager-> card WLan-> properties-> Advanced tab
  Here, you can check the different settings and change is necessary.

  Last but not least the BIOS can be downloaded from page European driver Toshiba and download functions because I could download the latest version of the BIOS

• Satellite L300 - MSKLC1.4 keyboard layout creator does not work properly

  Hello

  I installed the MS MSKLC 1.4 tool. on Toshiba Satellite L300 and Vista32. This tool is to generate a clean keyboard layout.

  I wanted to implement Gujarati signs for a friend. To do this, we put signs and letters on three 'levels' in this keyboard layout:

  1 Standart "a, b".
  2. pass the speeds as "A B"
  3 Altgr + key

  The first two levels with letters not run very well, but the last of them.

  We have tested in Open Office 3.1 and MS Works Word. The two programs do not accept Altgr + key letter.
  Open Office has no special function keys altgr +.

  In an editor that comes with MSKLC 1.4, level 3 also works very well. NO problem here!

  How this can happen? What should I do?

  Jens

  MSKLC 1.4. is available:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=8be579aa-780D-4253-9e0a-e17e51db2223&displaylang=en#overview

  > On a German-Toshiba A50 with XP.
  > THREE States appear Gujarati letters.

  To be honest I never tried to MSKLC1.4 keyboard layout creator but I n t think that it s a question of Toshiba.
  I think that it s related to the UK keyboard layout because he of working with available German (as you suggested).

  My personal suggestion could change the layout of the UK keyboard for the German language in Control Panel-> regional options & language control

  Check if this help

• Satellite L500D PSLK0A Toshiba Recovery Disc Creator does not work properly

  Hello

  I am trying to create a recovery for my Toshiba Satellite L500D PSLK0A-00U009 disc.
  When I run the Recovery Disc Creator he starts to open then it comes up with a box with an exclamation point, he says: 'cannot open target partition. Then the recovery disc creator will open. It seems normal, then when I insert a CD for the process seems to work then it says error and stop and ejects the CD, the error is that the code is: 0E01B5-26-510444 D 9

  I already uninstalled and then program then reinstalled with the help of a download from the Web MyToshiba site and this has not fixed the problem.

  Any suggestions?

  Hello

  Have you tried different discs from different manufacturers?
  How about you, USB flash memory usage? AFAIK, you can create a bootable Recovery USB flash stick too.

• WiFi does not work on the battery!

  Hello

  I am running Windows 8.0 (64 bit) and my wifi does not work properly in battery mode. AC adapter, it works 100% perfect but in battery operation, it always goes to limited connectivity. He repaired, but 25seconds later, he gets the same problem. Limited each time connectivity. It's a never ending cycle warranty has expired and I am not happy with it.

  Even if repaired, impossible to open any website. Full 5 bars wifi but still the same result. Tried manually (TCP/IP IPv4 settings) but did not work at all.

  My wifi driver is Intel Centrino Wireless N 2230 (15.12.0.6 updated version of the intel.com site).

  C2Y46AV product number (HP ENVY DV6 NOTEBOOK PC)

  Serial number [thank you for visiting the Forums from HP Support. I'm sorry to inform you that your message needs some changes to remove personal information].

  Tried everything that I could possibly think off such as disabling firewall windows Norton Firewall & Running but still the same problem.

  Can you please tell me what to do?

  HP update.

  Can you please provide a solution for this.

  Thank you

  Navaid involves.

  Hello Ophelia-involves.

  Thanks for posting on the HP Forums!

  I understand that the computer has problems connecting to the networks without wire on the battery life. I'll do my best to help you! After some research, I actually found a Microsoft document that contains the steps I would have provided for your problem: you may experience problems with connectivity or performance issues when you connect a portable computer that runs Windows to a wireless access point

  Please try these steps and let me know what happens. Thank you!

  Mario

• WiFi does not work on Satellite C-55-A - 14 G with a Win 8 64 bit OS

  My wifi does not work on Satellite C55 - A - 14 G 8 64-bit Windows.
  How can I fix?

  There is wifi on other computers, but not on this laptop.

  Hello

  You always win 8?
  Microsoft has already published the Win 8.1 System.
  It of recommended to update 8 Win Win 8.1 because different bugs have been fixed and new features have been added.

  The 8.1 update win is free and you can download the Microsoft Store update files.
  Please perform updates, such as recommended by Toshiba and essential update, the driver and tools.

  I guess that after updating the WLan would work properly.

• I upgraded Qualcom Ateros and now my wifi does not work.

  Original title;

  I upgraded Qualcom Ateros and now my wifi does not work. How is it?

  I've just updated and now my wifi does not work. I trust Microsoft updates... But this time I shouldn't trust...

  Hello

  1. what operating system is installed on the computer?

  2. How is that you have updated drivers for QUALCOMM Ateros?

  3. what exactly happens when the problem occurs? You receive an error message?

  If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. Check out the following link.

  Restore a driver with its previous version

  http://Windows.Microsoft.com/en-us/Windows7/restore-a-driver-to-its-previous-version

  Also check out the following link:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Let us know if it helps!