Satellite L670 series: fast ethernet or gigabit ethernet?

Similar Questions

• Satellite L670 series keyboard problem

  Hello

  I have a TOSHIBA L670-11Z computer and 16 other people on a [french forum | http://forum.hardware.fr/hfr/OrdinateursPortables/Composant/defectueux-portable-satellite-sujet_58317_1.htm#t1186048].
  We all have the same problem with keyboard.
  When we type something, some keys are lost down by the keyboard (such as a buffer overflow)

  An external USB keyboard works very well.

  Some of our machine went to TOSHIBA support and came back with the same problem!

  This problem is known outside France?

  I did a [Facebook page | http://www.facebook.com/pages/Mon-Toshiba-deconne/175966572415167] on that with [video | http://www.facebook.com/video/video.php?v=123891791004342] showing the keyboard stopping by hitting the button "a".

  Concerning
  Paul TOTH

  Hello

  I know that this theme, that it has been already discussed here.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=219679
  According to some users in this forum, BIOS update helped to address this problem.
  That is why I also recommend updating the BIOS!

  Please also take a look here:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=57236

  Change the settings in the
  Control Panel' - 'ease of access' - "change how your keyboard works" - "configuration Bounce Keys.

• Satellite C660: fast ethernet or gigabit ethernet?

  Hi all

  No matter what owners here Satellite C660 series?
  Looking at various Web sites, the common consensus is that the C660 series is not equipped with gigabit ethernet, but with regular fast ethernet.

  Can anyone confirm or deny that please?
  Does or does not gigabit ethernet?

  Thank you very much
  Kind regards
  Rene Fennet

  What Satellite C660 do you have exactly?

• Update the driver Via Rhine II Fast Ethernet Adapter

  Help, please!

  I can update my Via Rhine II Fast Ethernet Adapter driver with the 3.84.0.1 64 bit version of Windows XP same dough I'm running a 32-bit Windows XP?

  I could not find a version to 32 bit Win XP.

  My current driver version is 3.32.0.417, and a few programs scan driver free, that I found on the Internet it were classified as 'old '. My Internet connection isn't going very well.

  My system information:

  Widows XP, home edition, service pack 3, version 2002, intel celeron 420 CPU @ 1.60 Ghz, 160 Ghz, 384 MB RAM

  Thank you very much and God bless you!

  Tiberiu, Romania

  # No, if it's only for XP - 64.

  A driver is 'old' does not mean that you need to replace.  The general rule for Windows drivers is, "if it ain't broke, don't fix it."  You should only update a driver if the device does not work correctly and you have reason to believe that the driver is at fault, or (b) the new pilot adds features that you want or need.

  OTOH, if you go to the real Web SITE (instead of random file download sites), you can find a driver for XP 64 and XP (i.e., XP-32) who seems to be newer than yours - version 3.87.  This driver is for the following models, which can be yours (you have failed to identify the specific model you have).

  Integrated VT8251, VT8231, VT8233, VT8235 & VT8237 integrated (Rhine & Rhine II), VT6103 Rhine (PHY), VT6105/L/LOM and VT6106/H/L/S series (Rhine III), VT6105M management Fast Ethernet Controller (Rhine III), VT6115 Fast Ethernet Controller (Rhine III), VT6107 Fast Ethernet Controller (Rhine & Rhine II)

• Realtek Fast Ethernet Controller RTL8139 works do not under Windows 7.

  I have a problem getting my Realtek Fast Ethernet RTL8139 controller working under Windows 7. During my first installation of windows, in which the controller was visible device manager, I think to remember, but after the first reboot, it disappeared.
  I have two controllers active ethernet in my system, the first one mentioned above and the second: Realtek RTL8168C (P) / 8111C (P) Family PCI - E Gigabit Ethernet NIC (NDIS 6.20) [on board].
  Certainly, the controller who is not found is working because LEDS are light when I connect the card to a cable. The other computer that is connected to my PC even shows that a 100 Mbit connection has been created (with problems though). However, it is not possible to communicate.
  I already tried to install the latest drivers from Realtek for Win7 page (dated on the 22.09.2009) but it did not help.

  System Specs:

  Processor: Pentium Dual-Core CPU E5300 @ 2.60 GHz
  (Vivid RAM) memory: 4.00 GB
  Graphics: NVIDIA GeForce 9500 GT

  System

  Manufacturer: Gigabyte Technology Co., Ltd..
  Model: G31M-ES2L
  SystemType: 64 Bit - OS
  Number of cores: 2

  Network card:

  Realtek RTL8168C (P) / 8111C (P) Family PCI - E Gigabit Ethernet NIC (NDIS 6.20) [work]!
  Realtek RTL8139 Fast Ethernet Controller (NDIS 5.1) [DOES not work!]
   
  OS: Windows 7 Professional (Version 6.1.7600)

  Hello

  Uninstall the audio player of the program and features.

  Then install the Realtek driver by downloading it from the link below:
  http://America.Giga-Byte.com/filelist/Driver/motherboard_driver_audio_realtek_azalia.exe

  Cheers and enjoy... :))

• For Fast Ethernet SFP modules

  Hello

  We are looking for fiber-to-ethernet converter.

  Is there any SFP module that plugs directly into the Fast Ethernet to a switch port.

  Please visit the following link: -.

  http://www.Cisco.com/en/us/prod/collateral/modules/ps5455/ps6578/product_data_sheet0900aecd801f931c.html

  He said "the Cisco100BASE-X Form Factor Pluggable SFP (Small) (Figure 1) is a hot output device that plugs into the Fast Ethernet ports, dual rate Fast/Gigabit Ethernet ports or Gigabit Ethernet from a Cisco switch ports or a router, which connects the port with the fiber cabling network.".

  If this module can be plugged into any port of FE, is it compatible with Cisco switches only?...

  Please reply,

  Thank you

  Amit

  The SFP port is just a place where the optical SFP is sitting in the switch (connect internally to power, data bus, etc.). SFP offers you the possibility to install a plug-in to adapt to the requirement of the network; If short-range fiber, fiber long reach or same RJ45 without changing an entire line card or switch.  SFP ports are integrated in the switch by a manufacturer, not bolted on after.  The specification for the connector module and SFP interface is detailed in an SFP MSA (multi-source agreement); designed to offer a platform in the industry to build.

  If your switch has a fixed electric port and you do not have access to power (for a converter to media or other), then the terminal switch will be replaced by a device with a fiber interface option. That, or you'll find a power on fiber system with enough power to drive a Media Converter (which I don't think that there are still).

  I hope this helps!

• If I remove the Reaktek RTL 8139/801 x program Fast Ethernet NIC family in my PC it will affect my internet access even if it is not make it now

  If I remove the Reaktek RTL 8139/801 x program Fast Ethernet NIC family in my PC it will affect my internet access even if it is not make it now and apparently it works either way because I get a message that it is unplugged and I tried to fix and it tells me to insert a cd, which I did not.

  Hello

  You must have the drivers for the RTL 8139 NIC - you can download it from the Web to Realtek site - here is the link:

  http://www.Realtek.com/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=6&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  LC

• driver realtek RT8139/810 x Fast ethernet for HP CQ58-d57SR adapter

  Take the new HP compaq CQ58-d57SR. Search help driver realtek RT8139/810 x Fast ethernet for Win7 32 adapter?

  After installation position rezult pilot will be negativ. Run Auto search on internet, win7 see adapter ok

• After increasing my speed with my ISP, I get the message by default Outlook Express Mail POP3 / PPP DID not, does not [00000008] ULi PCI Fast Ethernet Controller

  Network adapters [00000008] ULi PCI Fast Ethernet Controller failure

  I had a slow Internet connection.  Recently, I changed to 1 Mbps. After this change, I get the following messages:

  1. default Outlook Express Mail

  POP3 / PPP

  FAILED

  2 network cards

  [00000008] ULi PCI Fast Ethernet Controller has failed

  Kindly help

  S C DIOP

  After setting the network card to make IE work, then check OE.  If the OE still has problems, check under Tools | Options | Connections and tools | Accounts | Mail | Properties | Connection to be sure, the settings are correct.  You may also need to remove your e-mail account, close OE and then add it back again.

  Steve

• Spectrum X 360 13: adapter usb to fast ethernet for X 360

  My spectrum X 360 comes with a USB fast ethernet adapter manufactured by Asix. Type AS88772A.

  When I use it on another computer, it installs and works fine. But on the spectrum: not a beep. I tried to remove the drivers, reinstall the adapter with the drivers directly from the manufacturer (HP does not provide any driver on his site), threatening even the stupid thing, but no go. There is a recovery partition to win 8.1

  Anyone know this problem and maybe even have a solution? Thnx.

  Rob.

  The problem has been resolved.
  I did a full restore from the recovery partition and I upgraded to win 10. It works fine now. I couldn't not to identify the cause.
  Rob

• The model name of my DM9601 To Fast Ethernet adapt is DM9601 to Fast Ethernet Adapterhas has stopped working correctly because a compatible driver is not available for this version of Windows.

  has stopped working properly because a compatible driver is not available for this version of Windows.  This is the error I get and it made my computer unable to re boot. Please help me how to set right.

  Thank youy

  Hello

  you left in the name of material on

  DM9601 USB to Fast Ethernet card; fix?

  and sorry, but I cannot find a driver for him after XP

  you are also posting in the wrong forum

  Try the forum hardware and drivers

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware?page=1&tab=all

  or contact the hardware manufacturer

  they write drivers for their products, not from microsoft

  ______________________________________________________

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Realtek fast ethernet card does not work on laptop with Vista

  My realtek fast ethernet does not work with my windows, what can I do about it?

  I have no internet access on my laptop

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• Realtek RTL8139/810 x Family Fast Ethernet NIC #2

  Hello

  I recently bought windows 7 ultimate and am ready to upgrade to windows xp day, but just need an answer to the question.

  I have a Realtek RTL8139/810 x Family Fast Ethernet NIC #2 adapter and when I run windows 7 upgrade advisor it shows that it is compatible, I wonder what I have to install the drivers/software for this after installing Windows 7 or just install my internet as usual?

  Thank you

  You shouldn't do anything. The driver should be installed automatically.

  Thank you
  Chris

• Windows 7 Upgrade Advisor - Rhine II fast ethernet ADAPTER

  I am currently running XP SP3 32 bit on AMD Athlon 64, 2 GB RAM machine.  I want to upgrade to Windows 7 64 bit.

  I read this: http://windows.microsoft.com/is-IS/windows7/help/upgrading-from-windows-xp-to-windows-7

  I ran the Windows 7 Upgrade Advisor - version 64 bit says 9 questions, 8 of whom are software (Adobe, shockwave, .NET 1.1, etc.), but that makes me nervous is VIA Rhine II Fast Ethernet adapt driver would need to be updated.
  I run Belarc and identified as VT8237 chipset. so I downloaded the latest driver here: http://www.via.com.tw/en/support/drivers.jsp and got the 3.87 driver version dated Date may 5, 2011.
  I have re-ran Upgrade Advisor, and it is still showing that I have to get the latest driver.  I have the latest driver, using my CURRENT operating system to choose.
  Do I need to download the driver for the VT8237 selecting Windows 7 as OS?

  You need to download and save the driver Windows 7 for the VT8237.

  After the upgrade, you must apply the driver. Until you install the Windows 7 driver after the update you will not be able to access the internet.

  It would be wise download and save all drivers Windows 7 you might need for your system.

  The upgrade cheaper, assuming that the offer is available where you are, is to upgrade to Windows 8 at price special launch. You'll need the drivers Windows 8 If you did.

  Given that you want to move to 64-bit, you must upgrade to a club. If you have access to a 64-bit system, you can buy and download an upgrade in line 64-bit on this system. The upgrade is not bound to the system on which it is downloaded.

• D-Link DUB-E100 high speed USB 2.0 Fast Ethernet Adapter

  I have a problem with my LAN card when I come overseas for a business meeting. I choose not to send my new phone Samsung difficulty since it is necessary for a meeting. So, I bought this adapter for temporary. It took me an hour to make it work on my Windows 7 with WinXP driver (there is no Win 7 drivers available). I found it works well if I use only for my Microsoft Outlook, but not at all for the Web site. Most of the time I try to surf, my system crash and blue screen appear. Any people have any idea what should I do? I have to be on this thing for months and I have so much to do between this computer and my office.

  Why can't you buy something that is Wondows 7 compatible? The DUB E100 is also old

  On the site of D-Link...

  «The D-Link DUB-E100 is a Hi-Speed USB 2.0 10/100Mbps Fast Ethernet Adapter specifically designed to plug into a port Universal Serial Bus (USB) available on a computer desktop or laptop PC running Microsoft Windows XP, Me, 2000, or 98SE.»