Satellite L670D-103 - nothing displayed on the screen

Similar Questions

• Satellite Pro L300 - nothing appears on the screen

  Hello

  Stupidly, I dropped the phone on the floor and now I can hear the phone turn on and the loading of windows, but I don't see anything on the screen. If I pull the laptop to me, applying light pressure, the backlight turns on, but there is still no display. If someone could help it would be much appreciated.

  Thank you

  Hello

  I'm sorry to hear that, JungleMan, but it can happen to anyone. ;)

  In any case, I think that it s something wrong with the display and FL inverter which controls the backlight. You can see an image on an external monitor?
  If yes that internal must replace and also the FL inverter I think because you apply slight pressure only backlight lights.

  You can order a new screen and other parts of an official Toshiba authorized service provider in your country.

• How to change the Satellite L670D-103 using new SSD 80 GB HARD drive?

  Hello

  I have a Satellite L670D-103 with a 320 GB HARD drive running at 5400 RPM which is too slow for me.

  So I plan to change this factory by a new SSD HDD to increase the performance of the overall system :)

  But as the SSD are expensive, I have only a 80 GB SSD.

  I built the recovery on a USB media and I want to use it to restore my system to the new SSD (I previously did the space needed to ensure that all data can be stored on my new SSD 80 GB space; p)

  Retrieving SSD partitioning new procedure is done without error, but when copying image to restore data to freshly created the partition, one not enough space error stop the process!

  It seems that the recovery procedure is possible on a hard drive that is equal or superior to the original size of the disk (320 gb).

  So, how can I restore mysystem on my new SSD?

  Thank you
  Stéphane.

  > It seems that the recovery procedure is possible on a hard drive that is equal or superior to the original size of the disk (320 gb)

  To my knowledge, you have different recovery options:

  (* 1) * recovery of factory default software

  (a) recovery to out of box state
  (b) recovery without changing the HARD drive partitions
  (c) recovery of a custom size partition

  (* 2) * "erase the HARD drive.

  I think that if you choose factory default software recovery of-> recovery to out of box state then the recovery would create exactly the same size of partition on the new SSD which were available on the 320 GB HARD drive.
  I think this might be the reason why you have received this message.

  Perhaps you need to choose the 3rd option Recovery on a custom size partition

  What do you think?

• Cannot install utilities on Satellite L670D-103 with Win7 32-bit Toshiba

  Hello

  I have a problem with my brand new Satellite L670D-103. To install my design software (AutoCAD_32bit), I had to install a 32 bit OS. So, now, I'm running under Windows7 32 bit and my CAD software works great, perfect. The problem is that I can't find any TOSHIBA (utilities or added value or HotKey) software that runs on Windows7 32 bit for my type of computer. If the shortcut keys do not work and my WIFI is turned off! (I need to use the Fn + F8 keyboard shortcut to turn on!)

  I tried to install the other version of "Toshiba Value added package" of another type of computer SATELLITE but it never works...

  Someone has an idea? is there anyone from Toshiba support help me?

  Thank you
  Olivier

  Thanks for the feedback second

• nothing comes on the screen but I can hear the game.

  nothing appears on the screen but I can hear the game, it's just a blank black screen.

  Hi TiaBurt,

  (1) what version of operating system do you use?

  (2) game that you are trying to read?

  (3) have you been able to play the game earlier?

  (4) you are able to play games without problems?

  First and the best suggestion for now would be to uninstall and reinstall the display updated the manufacturer drivers.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Retrieve information for assistance

  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Powers on my computer, but no image is displayed on the screen.

  Powers on my computer, but no image is displayed on the screen.

  You forgot to tell us something about your computer. You hear any sound from the computer at all once you turn it on, it? It sounds like the hard drive turning upward? You see absolutely nothing on the screen? Be more descriptive and include information about your computer (computer desk/computer laptop/brand-model), his age, and precisely what happens when you turn on the computer. It is a hardware problem and narrowing of component that failed is not possible without more information from you.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad).

  MS - MVP - Elephant Boy computers - don't panic!

• When I start my computer Windows 7, it starts but nothing appears on the screen.

  Original title: startup problem

  Hello.

  When I start my computer win 7, it starts (fan starts, dvd disk drive turns on, lights on the Tower of keys on and even usb ports give power IE can charge my phone by usb cable), but nothing appears on the screen (empty, nothing, does not react)

  However, after you restart the computer several times active and computer screen display works fine without problems.

  This problem occurs only when I turn on the computer after having completely off but does not happen when I restart using the option restart.

  I'd be suspicious of an imminent hard drive failure.  Download and run the program tester for the manufacturer of your hard disk drive.  Give me the model number of your player (Device Manager), and I'll give you the link to download. At least, you have to exclude this possibility before you spend a lot of time trying to re - build.

• Firefox will not display on the screen even though with Process Explorer, I see active Firefox.exe but no CPU usage

  I use Firefox as default browser v10.0.2 on Dell XPS8300 Intel Core i5 and Windows 7 Ultimate and Compaq Presario CQ57 IO IO Intel Core i3 and Windows 7 Home. More frequently on the (approximately 90% of attempts) that Dell (50% of attempts) Firefox will not display on the screen when I click the icon. Cannot display other programs when it happens. I expressly say display because I believe that Firefox has started. To work around the problem, I installed Process Explorer on both machines and launch this program first, then click on the Firefox icon. When the problem occurs I see process Firefox.exe in the list of processes; some CPU consumed but, then, no CPU activity. If I click on the Firefox icon, yet another process opens in the list of processes, but with the same answer - some consumed CPU and then no CPU activity. If I have 2 processes running and kill the process from the 1st, the 2nd poster and then everything is normal. If I do not open it treat a 2nd, but kill the 1st process then click the Firefox Firefox is displayed and all then is normal. This problem has occurred since the original on the two new machines installation. I have updated the video drivers on both computers.

  OK, let's see if we can solve this problem and make it work for you!

  First of all, if you start Firefox in safe mode (restart your computer first, then when you open Firefox, hold down the SHIFT key) it starts more reliable? This is usually caused by a defective module. If this does not help, then restart Firefox, go to the Firefox, then add-ons button and disable your extensions one by one until you find the troublemaker.

  Also, try to update to Firefox 11, it has several bug fixes that might make life easier here.

  Just as a few troubleshooting steps base to ensure that we have all the bases covered,
  Run all Windows updates, install all required service packs, etc.

  Update all of your plugins (Flash, Java, etc.): http://www.mozilla.org/plugincheck/.

  Download and install MalwareBytes Anti-Malware, run a full scan. http://www.malwarebytes.org/. This check allows that there is no virus on your computer, causing problems. You can uninstall this program after having cleaned the infections.

• Satellite P10-304 turns on but the screen is off.

  Hi there... Please someone help me. I m having this problem since last week with my P10-304... it was working fine... but now last week I turned it off and turned the morning we return on the use of battery that he kept on going stand-by mode... and when I turned it off again and plugged the AC adapter is on, but screen didn't seem to turn on...

  I thought that the screen has gone... but last night I turned it on. He walks and went to hibernation! Don t know why. And now the same problem again... I turn power turned blue and the screen is blank (as it s off) I put t know what to do. I tried using the recovery disk. But nothing comes on the screen, as I said, the screen is blank as is it turned off s.

  Please help me... !!!

  Hello

  Well, this is a strange question. It's not easy to say what can be the problem.
  But first you must remove the battery and the AC adapter for 1, 2 hours.
  After this procedure, use the power supply for the test to work.
  If the problem is still topical, I guess that it s a hardware malfunction.
  In this case, the best way is to contact the service partner.

  Best regards

• I have Dell ispron B130 running windows xp, how do I print what is displayed on the screen using the PRNT SCRN key?

  I have Dell ispron B130 running windows xp, how do I print what is displayed on the screen using the PRNT SCRN key?

  The 'Print screen' button is misnamed.  In fact, what happens when you press it, it is that an image of the screen is copied to the Clipboard.  You must then open an application that can work with images (paint works) and paste in the opened window (or right-click > paste or edit > paste).  Then you can use the regular print of this application (for example, the file > print).

  You can also download free IrfanView.  It is a very handy utility.  It allows you to open and view a wide variety of image file formats and also has the capability of the bulk renaming of files and - for your current number - capture screen images and prints them out.

• When I click on START / all PROGRAMS /, most programs do not display on the screen.

  I had a problem with a virus. Used Microsoft security programs to remove it. However, when I click on START / all PROGRAMS /, most programs do not display on the screen. Any ideas on how to solve this problem?

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/310353
  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  Method 2:
  Create a new user account and check if it helps:
  http://support.Microsoft.com/kb/279783

  It will be useful.

• Somehow the display on the screen rotates 90 degrees

  original title: Dell vostro 1400.

  Somehow the display on the screen rotates 90 degrees cw on the Dell Vostro 1400 laptop.  How to rotate the screen 90 degrees ccw?

  Hello

  Try Ctrl + Alt and upward or down arrow... see how you go with it

  Concerning

  GT4U

• Loginoff, save your settings and Windows stops no display on the screen, every time I stop my Windows XP Professional SP3

  Hi all

  Hi Patfaucher1974,
   
  Your question seems incomplete. When you say "Windows is no display on the screen stop" means that you do not get the screen that says "closing Windows"?
  -You are unable to shut down your computer?
  -If so, can remind you to make changes to your computer between the calendar when things worked fine and now?
   

  Try the steps listed in the article below and check if that helps you:

  Your computer stops responding when you try to shut down in Windows XP

  Additional reference on:

  Advanced Troubleshooting for shutdown problems in Windows XP

• This message is displayed on the screen at startup "smrgdf program is missing.

  This message is displayed on the screen at startup - what is it and how do I do it please?

  Hello

  Check the suggestion of Volunteer J of his last message

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-pictures/images-on-MSN-home-page-do-not-load-Yahoo-home/95970f3f-6b8f-4cf5-ad28-8b8e4c7ba646

  smrgdf.exe seems to be a file of System Mechanic.

• Turn off the display on the screen for the next meetings

  I have several MX300s TC7.3.6 running.

  They are all registered to CUCM and TMS as the alternative directory server.

  Can you tell me how to disable the meetings to come, displayed on the screen?

  The MX800s have a field in CUCM for OSD - Todays booking power, but not the MX300s

  THX,

  Rob

  The command is there for the MX800 won't say he supports it, the TodaysBooking configuration is supported only on older codecs that perform TC software.  It isn't a way to disable the OSD indicator for future meetings, your only option is to use a custom wallpaper that will eliminate some parts of the OSD as the clock and the list of upcoming meetings.