Satellite L750 - Director Windows starts with the E945000E error code

Similar Questions

• 'Circular session context Logger Kernal' was able to start with the following error: 0xC0000035

  I hope it helps someone as it has been a persistent problem for some time at least six months. I did the research almost as long and also a solution for this, but I'm done here as a last resort. My question to had is that I believe that this occurs at the start of most of the time with the system, but can occur later also is originally the system will block also up and we have four other systems here that this was never a problem at all. I'm still looking and I hope to find an answer somewhere with out having to do a complete clean reinstall 7. I looked here for answers and met several all through the web, including here none have solved the problem.  I would be grateful at least someone leading me in the right direction on this issue if you can.

  Hope this is the right place to post also. If this isn't the case, please advise.

  Journal name:

  Source:

  Date:

  Event ID:

  Microsoft - Windows - Kernel-also racingl Admin
  Microsoft - Windows-Kernel-EventTracing

  02/06/2013 -07:59:57

  2

  Task category: Session

  Level: error

  Keywords: Session

  User: SYSTEM

  Computer: BarbKeenan-bail

  Description:

  Session "circular kernel context Logger" was able to start with the following error:

  OxC0000035
  EventXmI:

  
  

  BDB6-4648-BC92-F3FDC74D3CA2}">I >
  2

  O

  2

  2

  12
  Ox80000000000000 1 O

  I >
  2713

  I >

  I >
  Microsoft-Windows-Kernel-EventTracing/Admin
  BarbKeenan - bail

  I >

  
  

  Kernel context Logger circular
  

  3221225525
  268436608

  
  

  For what it's worth, I have this error periodically on several Windows 7 systems.

  She seem to be a non-event and does cause some system problems.

  I don't think that your freezing problem is caused by the present.

  However, take a look at this thread.

  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/2eab69ac-7537-40c4-916e-6f6d41c05d4b

• Journal of session "Homegroup" was able to start with the following error: 0xC0000035

  Hi my event error log says: session "Journal of home group", was able to start with the following error: 0xC0000035

  I don't have a setup of home group because I am the sole operator of my PC. (Windows 7 SP1 x 64).
  I assume that the error is so wrong? Y/N?
  If so is there a way to change the reports for this message?
  Thanks for all the support.

  Hello

  1 are you facing a problem to work with any application because of the error?

  2. do you have connected on a network printer?

  3. you remember changes to the computer before the show?

  I suggest you try the following:

  Run a scan of the System File Checker.

  http://support.Microsoft.com/kb/929833

  Also, make sure that homegroup is not created on the computer, even if the computer is not connected to the other computer. When you configure a network device it will prompt you to create a home group. Check the following link to leave a homegroup.

  http://Windows.Microsoft.com/en-us/Windows7/leave-a-HomeGroup

• Get "I/o Error" with the 0x8078002A error code when I start a backup.

  * Original title: IO Error Message - I am an amateur

  When I start a backup of my hard drive to my external hard drive, I get an error that reads "I/o Error" with the 0x8078002A error code.  I am a real novice.  I can do either fix it or work around this problem?

  Hello

  Welcome to the Microsoft community.

  Try the steps in these articles:

  Error message when you try to perform a full backup on a Windows Vista-based computer: "" the request could not be performed because of an i/o device error".
  http://support.Microsoft.com/kb/952272
  Note: It is applicable for Windows 7 as well.

  Perform a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.

• Session "circular kernel context Logger" was able to start with the following error: 0xC0000035

  Is there a way to eliminate the error "Session"Circular kernel context Logger"was able to start with the following error: 0xC0000035?

  Hello A123.

  Thanks for the return of the response.  Regarding your last question, some were told that they have ignored this error without any problem, but I would like to see if we can fix that.  If you start in a clean boot state, you can reproduce this error?  I want to see if a program is causing this to happen.

  Clean boot:

  http://support.Microsoft.com/kb/929135

• Random BSOD with the following error code: 0 x 00000116 whenever I'm in a game.

  For some time now, I have random BSOD with the following error code: 0 x 00000116 whenever I'm in a game.
  I tried to update the video drivers, rolling back to an older version of the driver, even reinstall windows and without having to install anything else except the video driver (without windows updates) I went and started a game(APB:Reloaded) one played for a while and he always gave me this JUDGMENT. I'm out of ideas.
  The machine that I use windows with is an Ace Aspire 5750 G laptop.
  The specifications are the following:
  Intel i5 - 2410 m with Intel HD 3000 (time, 83 all in game).
  NVIDIA GT540m (time, 76 while gaming),
  8 GB of ram.
  I took a picture of the BSOD and uploaded to Skydrive, link here: https://skydrive.live.com/redir?resid=AB28B2FD7DC5BA0E! 196 & authkey =! AF849R6EMQvYixs

  Hello

  Unfortunately I'm not surprised at all symptoms you described.

  As I said above:

  My main concern is that the material side of the issue is rooted in the video to verify that
  as much as you can. And of course it can still be heat related.

  Do not forget to ask in the Nvidia Forums (and support) to see if others have the same
  sort of problems with this video card.

  Rob - SpiritX

• Install Microsoft SQL Server 2005 Express edition service pack 4 (KB2463332) fails with the 0xD59 error code

  Computer tried to install the automatic update for SQL Server 2005 pack 4 (KB2463332) fails with the 0xD59 error code

  Hello Rich Boetsch,

  Please ask your question in the forums SQL Server within TechNet they manipulate all server related issue.

  See you soon

• Cannot start from the CD: Error Code 5. __Asking driver primary IDE channel.

  I install a new copy of windows 7 on my old computer. My computer have no major problems from Advisor Windows 7 report. When the system boots on the DVD I got the error message cannot START FROM the CD: error 5 CODE. Also, I can't start XP installation. When I get to the part on which partition to install I got the message to load a driver. He asks me to load a driver for the MAIN IDE CHANNEL. I have search on Intel, Gigabyte and other internet sites but have not found a specific driver.
  My computer is:
  Processor Intel P4 1.7Ghz
  15 GB OF RAM
  GeForce 7600GS
  320 GB IDE HARD DRIVE
  Card mother Gigabyte GA-8ITX3
  Intel 820 Chipset family with 82801BA (ICH2) I/O controller.

  Help, please!

  P.S. noticed that 2Angel had a similar problem but no solution.

  Error code 5 - can't boot from DVD

  Some people have reported that from the installation of Windows 7 so that Windows XP/Vista is running can help with this error. Update your BIOS may also help.

  Here is a workaround that can also help:
  http://www.SevenForums.com/installation-setup/2591-boot-error-code-5-a-2.html#post31719

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Does not work Windows genuine' with a 0x8004fe21 error code

  Separated from this thread.

  Gerry, I have the same problem described by Joachim and rvc2.  It began with me after KB3004394 has been installed on 10 December.  KB3024777 has been installed on 13 December, but I still get the pop up saying "this computer is not running genuine Windows" with an 0x8004fe21 error code.

  Updates appear in the history of update of review, but do not appear in the installed updates.

  I also have a Dell machine and this is certainly a legitimate copy of Windows 7 (64-bit SP1) with the product code for Windows under the battery cover.

  Any solution yet?

  Kind regards
  Dermo

  Hold off for now if you are not currently having this problem.

• Windows cannot update the 80004002 error code.

  OT: Windows Update.

  I continue to receive messages that Windows cannot update and the 80004002 error code but I put t understand where to go from there. Help!

  Moved from Vista to install, upgrade and activate Forum.

  http://Support2.Microsoft.com/kb/943144/en-AU

  Method 2: Register the Wups2.dll file

• Satellite L450D - 13P cannot start with the new HARD drive

  Hello

  IME novice steve and real computers.
  Two years ago I have toshiba purchest mine 2 is the toshiba satellite L450D - 13p runing windows7! And my partners is the toshiba satellite pro 7 also runing windows!

  The problem is that my hard drive is scrap, so I purchest a new 500 gb HDD, instaled it put in the disk I got with him and nothing?
  Hope any 1 here can help me

  Thanks a lot steve!

  In general you can swap the HARD drive or update it with more a (ability), but the installation of recovery should work. It is important to use compatible HARD drive for certain system.
  I did several times in the past. No problem at all.

  After HDD change the value of the BIOS default settings and start recovery installation using created the recovery disc.

  Start your laptop and when you see Toshiba welcome screen pres F12 repeatedly to enter the boot menu.
  When the menu is displayed on the screen, put the recovery DVD in the optical disc drive.
  In the menu choose you CD/DVD and press ENTER.
  Installation of recovery should start.

  Please do so and send feedback.

• Satellite L30 - 10Y always starts with the message of repair

  Hello

  Whenever I try to run my Satellite L30 - 10Y (PSL33E) I get the window with the message Startup Repair (Windows cannot repair this computer automatically).

  I went through the list full repair and still have the same message.

  Can someone please?

  Hello

  Maybe the operating system is confusing upward
  Have you tried to restore using the Toshiba Recovery disk?
  Check if it works!

• Satellite A30 does not start with the USB device connected at boot time

  Hello

  I have a Satellite A30 and sometimes it does not start.
  After turning on, not even the BIOS starts.
  even if sometimes the BIOS starts, but the OS does not load.

  I figured out that its related to USB devices connected at boot time.
  If no USB devices are connected, it starts without a problem.
  Even if the start-up is suspended, as soon as you unplug start it BIOS USB devices.
  Its ok to connect USB devices later, once the system has started.
  I disabled "removable devices boot" and "network startup."
  just in case, but it makes no difference.

  BIOS is version the most recent (1.70) and it comes up with all kinds of USB devices.
  printer, mouse and (self-powered) external USB hard disk.

  Is this a known issue?
  There is no known workaround solution?

  Hello

  I put t know why this happens, but it has to do with the BIOS.
  The same thing happened on my old laptop. I couldn't start my unit while the USB printer has been turned on and connected.
  The only solution is to disconnect the external USB device during the boot process.

  RSY you should check if the order of boot in the BIOS has been on the HARD drive first.

• Windows starts with the failed disk verification process

  When you start Windows, the process is interrupted with the following message:
  Checking file system on C:
  The type of the file system is NTFS

  One of your disks needs to be checked for consistency.  You can cancel the disk check, but it is strongly recommended to htat you continue.
  The disk check was cancelled.

  He continued to cancel itself and Windows continues to leave now. It is a HP Pavilion dm4 with Windows® 7 Home Premium 64-bit. How to solve this?  Please help me!

  Hello

  1 how long have you been faced with this problem?
  2 did you recent hardware or software changes to your computer before this problem?

  Step 1: If you are able to boot into normal mode successfully then, try to download the Fixit of the article below and install it.
  http://support.Microsoft.com/kb/975778

  Step 2: If you are unable to boot into normal mode, try to start in safe mode, and then perform the check of the drive in safe mode.
  Reference:
  http://Windows.Microsoft.com/en-us/Windows7/what-is-safe-mode 
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Step 3: The repair of the boot on the computer.

  Reference: http://windows.microsoft.com/en-us/windows7/products/features/startup-repair

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Satellite Pro L series starts with the error message

  Someone played with the BIOS or whatever on my laptop.

  Now, I can't get beyond the log in screen safe mode (black and white) and the error message that oxoooooo7b OXF7A8E63C OXC0000034 rises.

  I can not find discs to reboot or something else and don't know what to do to solve the problem.

  Any help will be most appreciated, because I'm really at a loss for what to do for the best, that I don't know much about computers as of how put the right problems like this.

  Hello

  You can try to repair the system.
  Switch on and press F8,
  Now, you will see the advanced boot options:
  Here you can choose the option: last known good configuration

  If this option does not help, restart the device and press F8 again.
  Choose the first option: fix my computer
  Here, you can choose between different options.
  You can enable Win 7 to find the problems and fix automatically or you will use the Toshiba HDD recovery option to restore the entire system.