Satellite L750 goes no more 'sleep' mode

I've had my L750 for 10 months now. Suddenly it will not go in mode 'sleep' when I close the lid. I checked the power settings and it is set to standby mode when closed.

Everyone has ideas, I'm sick of working full time.

On this virtual path, it is not easy to say why this is happening. The configuration of your laptop is unknown for us but maybe some background process or in the background running application block it.

Try to stop some of them manually and check again.

Tags: Toshiba

Similar Questions

  • dektop copmputer goes no more 'sleep' mode

    My computer screen goes ok in mode "Eve".
    But my desktop computer, which is a homemade computer.  He used to sleep after 20 minutes and now it does not work. I sort all the trick in the book but without result must be a stopped program. I need more ideas tho os is Windows 7 ultimate.

    Hi Robert,.

    According to the description of the problem, you can't put the computer in sleep mode. In order to quickly provide a solution, please answer these questions:

    1. you receive an error message or error code?

    2 did you do changes on the computer before the show?

    Follow the suggestions below for a possible solution:

    Method 1: I suggest you perform the clean boot and check if the problem persists.

    Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

     

    Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 3 of the article mentioned above.

     

    Method 2: You can follow the steps in the article mentioned below and check if it works.

    You can't do a computer that runs Windows 7 stops or sleep

    http://support.Microsoft.com/kb/977307

    You can also run the troubleshooter of performance and check if it helps.

    Open the troubleshooter of Performance

    http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

    It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  • Suddenly, satellite L750 going to sleep - low battery?

    Hi guys,.

    I just want to ask why is that when I'm playing games like Assassins Creed/DMC.
    Sometimes my phone will shut down. The indicator lights on the left side were:

    A/c power: white Uni

    Power: Flashing Orange

    Battery: Flashing orange and

    And when I try to turn it on, it turns even if I press the power button.

    Furthermore, I always remove the battery.
    I could only turn on when I unplug the charger and plug it in again.
    Sometimes I can play for hours and it only happens when I play games.

    Model: SAtellite L750-1EZ

    Hello

    First clarify you something:
    The laptop goes to fashion 'sleep' or he just stopped automatically?

    Now something about the indicators:

    _DC/LED (first left) _
    This lights normally white when properly power adapter.
    If the output voltage of the AC adapter is abnormal or if power outages, this LED is flashing ornage/amber

    _AC power LED: (2nd left) _
    It normally turns white when the computer is turned on.
    If you turn off the computer in Standby Mode, the LED flashes orange about one second on, two off dry. Once when the system shuts down and while it remains off

    _Battery LED (3rd left): _
    This indicator shows the State of charge of battery and white indicates that the battery is fully charged. Orange indicates the battery is charging and orange blinking indicates a low battery charge level.

    Troubleshooting _Now: _
    If the computer turns off and DC IN indicator flashes orange/orange could be linked to the high temperature of the CPU: overheating.
    This can happen due to games because the laptop s CPU running performance
    and produce a high heat dissipation.
    This can happen because the cooling modules are timed by the dust.

    Here is an instruction how to clean the unit:
    http://APS2.toshiba-tro.de/KB0/HTD7A01ZZ000AR01.htm

  • Satellite Pro T130 - problems in sleep mode after you install the update wireless

    After installing the 3G modem & updates on day of Wireless manager from 29 September, my laptop began to have trouble waking sleep mode. Most of the time I had to hard stop. I solved currently the changing options issued for the "sleep mode" in the Panel, for the most part by turning off the advanced features (hybrid sleep, sleep, sleep network adapters usb). However, I want to solve the problem no doubt, as the current options require more time to enter the mode 'sleep'.

    My laptop is a Toshiba Satellite Pro T130 running under Windows 7 64-bit.

    Please help us :-)

    You have installed the updates recommended by Tempro?
    You can send us you have installed versions?

    I assume that with the old versions you didn t have this problem?

  • Satellite C665-p5010 - question deep sleep mode the installation of ethernet

    I get the question of deep sleep mode when installing ethernet in my laptop Toshiba C665.
    Even I tried plugging the cable Ethernet to the sound have not activated

    Pls help me in this situation.

    In Device Manager Ethernet to hidden state.

    Please can someone update on this issue...?

    What exactly do you mean by deep sleep mode?
    Which driver Ethernet have you installed?

    Ethernet could mean driver LAN or WLan.

  • Satellite L750 - face recognition (more rant of partition)

    With this Satellite L750 - I just, I would say that I'm getting a little cheesed off with it! I thought that Toshiba has improved, but maybe not.

    When I click on the face recognition program, all I get is a window that says "you are not authorized to perform this task - please contact your administrator for help"-great! Any ideas?

    And the drive is partitioned into equal parts between C: and D:. I want to reduce D: and extend C:, but to do that I need a third-party program like W7 disk management doesn't let me do. Why on Earth put in two equal partitions! Maybe I'll empty the bunch and do a clean install of W7 Ultimate (I have a permit) - Tosh is simply a hash of it in my opinion...

    Post edited by: mikeharry

    Hay

    Who cares what are Toshiba? Toshiba offers portable computers with factory settings. No one force you to use while it is. Create the initially and later recovery disc you can do with the partitions you want.

  • Cannot wake up Satellite C850 Windows 8 from sleep mode

    I accidentally mode "sleep" rather than stop it - and now cannot get back in my system-
    Blue light flashing power button on the front.

    Tried power / touch - keys - pad, but nothing just a black screen with cursor...
    How can I get back in. Recorded in my neighbors PC currently.

    Press and hold the power button / long 4 sec.
    Then the laptop should power OFF.
    Wait a few seconds, then press the power button again.
    Should work.

  • L50D-B satellite will not wake from sleep mode

    My satellite L50D-B - 16 Q won't get out of the way 'sleep'.
    When I turn on the power button so the NUMLOCK and CAPS LOCK light

    Hello

    How about this solution:

    • Disconnect the power adapter
    • Remove the main battery
    • Power button press and hold 30-40 long s
    • Reinsert the battery
    • Plug the power adapter
    • Press the power button

    Note: Repeat this procedure 4 or 5 times in the line and check if you could power the unit after each step

  • Satellite L750-11W - its more powerful is on the left side - SOLUTION

    Ive always noticed something strange on the sound when you use when using headphones and portable speakers.

    The sound is more powerful on the left side. I checked the sound balanced and it is balanced. I mean that it is attached to the same amplitude of the right speaker and the left...

    When you test the speakers with the windows audio software (tested the speakers, one at a time) the left is more powerful than the right and another strange thing is that the test of the right speaker its peeping (sound tests) is lower amplitude for the right speaker and it is not complete...

    The sound is about 2 sec and on the right speaker, this is what happens: the sound is lower and it can be heard for 1 second and after that the rest of the sound can be heard on the left speaker (the sound is more powerful)

    The audio driver is up to date

    I just found out what my problem was. It's the smart audio 3d immersion option. * I disabled it and the sound is normal now *... but there is a question why 3d immersion for whom?

    > I just discovered what my problem was. It's the smart audio 3d immersion option. I disabled it and the sound is normal now

    Great! Thanks for the comments!

    > but there is a question why 3d immersion to whom?

    Smart Audio provides various settings that change the audio properties, that I want to say that it is a sort function that allows you to change the sound.

  • My gamma automatically goes out of sleep mode

    I have the laptop of Lenovo W520 with the calibrator of color (not sure if the software is the culprit).
    When I calibrate the color using the color (Pantone software XRite) Stallion seems big enough.
    The question is whenever I just watch the gamma goes to a very high value every time and everything is washed and I have only two ways to solve this

    That could be the applet of the control panel graphics Intel apply it's own color profile and your substituting at startup.

    Try to go into the MSCONFIG Startup tab and uncheck the three Intel graphics of start-up entries. (This could cause a shot of life battery.)

  • Satellite L100 105 initialize not sleep mode?

    Hello I have a big problem!

    I shut down my computer on the eve.
    But when I turn on the unit again, I don't see anything on the screen!
    No Toshiba symbol no nothing.

    It seems to load the HARD disk shortly and the HDD LED flashes, the DVD drive reads something, and the keyboard lights little Flash at the same time. as a normal boot process. But after that, it will be processed again. It's like a loop!

    I need help. someone has an idea for my problem?

    Hello

    Seems not very well.
    If the Toshiba welcome screen does not appear then that there might be something wrong with the hardware.
    I think you don't have a lot of possibilities. Contact the service partner allowed in your country to control the laptop.

  • Windows 7 computer goes into Sleep Mode while the activity of the system

    Hello, I have windows 7 premium.  I think there may be a bug that needs to scan, my system goes to sleep while there is the activity of the system.  For example, when downloading a file, do a virus or by post where analyze or defragment.  I believe that the year 2010 are the operating systems with the smart enough so that the system is active and goes to sleep during execution of these programs are active.  Can someone tell me if this is a bug or suggest software to keep the system awake while 'X' program options is actively running, for example if I do a defrag of HDD, I don't want to change power if the computer is running all night, only for 2 or 3 hours that the scan is running Once the program ends defrag'ing the systemit should then wait for the time set in power options and stop.

    Hello
     
    If there is no interaction from the user to a certain amount of time, the computer goes into a sleep mode was
    application runs in the background. This isn't a bug. You may need to change the settings for options of power as a result.

    Sleep and extended: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions
     
    Change, create, or delete a power plan (scheme)
    http://Windows.Microsoft.com/en-us/Windows7/change-create-or-delete-a-power-plan-scheme

    Thanks and greetings
    Umesh P - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Photosmart 7520: Sleep Mode failure

    I have connected my 7520 Fax item and run the report of Test of Fax with Pass at each event.  The printer goes into Sleep Mode it almost immediately turns back.   When I disconnect the telephone line from the printer, the problem goes away and Sleep Mode works correctly.  Any ideas?

    Resolved - traded filter broadband ADSL with another taken.

  • HP Pavilion starts extended standby/sleep mode and stays there - there is nothing on the monitor

    I have a desktop HP Pavilion Elite HPE-250f (Core i7).

    I have been using internet. Suddenly the computer makes a little sound, and the screen went white. The computer seems to be in hibernation / sleep normal. Generally, when the computer goes into standby/sleep mode (after a certain period of not used), the color on the power button turns from blue to yellow. But this time, the blue color.

    Usually, I can move the mouse and exit this mode. But this time I moved the mouse and nothing happened.

    I pressed and held the power button and turns off the computer. I then turned the computer back on. The power button is blue, there is a green light on the back of the computer, and the fans were at work. But nothing on the screen.

    I rebooted several times, and there is nothing on the screen. There is no beep when the computer is restarted.

    What should I do? Help, please. Thank you.

    I removed the RAM memory cards and reinstalled them. That solved the problem.

  • iPhone 6s more going in as a sleep mode when sitting is not.

    iPhone 6s more going in as a sleep mode when sitting not used. I won't get it any delay message notifications until something wakes the phone as a call or unlock the screen. Sometimes, he sends even calls to your voicemail and imessages simply sit not showing not delivered to the other side of people. Seems to happen only when connected to wifi. Anyone facing this problem or have any suggestions? I checked all the settings that I even tried to leave it plugged to load and forever changed the automatic locking.  When that happens all notifications go out at the same time as overload and the sound does not come through them just the notification screen on... Help!

    Is do not disturb on? Icon of Crescent Moon at the top right

    If yes it off using the control center

Maybe you are looking for

  • NB550D - best way to install Win 7 64-bit and 64-bit drivers

    Hello I improved my NB550D to Windows7 Home Premium and installed 4 GB of RAM.This works much better, but want to go further and make a Windows7 Ultimate _64bit_ _clean install_ in order to take full advantage of theupgrade in RAM. My question is: wh

  • Control of read/write of FPGA Interface

    I need help on control of FPGA read/write Interface. I would like to connect data TCP Read (String) directly to VI FPGA Read, but the entrance is an FXP... How can I do this?

  • No sound on internet, youtube, facebook, etc. But its on itunes.

    I have no sound on the internet when I access youtube, facebook or anything on the web.  I can play dvd, itunes, the sound test.  I installed and re-installed all the plug ins, made sure the pilots were up-to-date.  I tried what I thought may work, b

  • HP G60-635DX won't start or switch to a black screen with blinking cursor

    Hello, whenever I turn on my HP G60-635DX laptop, I get a black screen with the blinking cursor right. I am running Windows 7 64 bit and I tried to do a system recovery using Recovery CD that I bought online, but the computer will not get past the bl

  • HP Laserjet 1212

    The HP Laserjet 1212 have the Auto on / Auto off technology or not? Different stories from HP support.  This is page 2 HPsite that I got the info from http://www.hp.com/hpinfo/newsroom/press_kits/2010/plugandprint/pdf/HPAOAO_Solution_Brief.pdf Someon