Satellite L750 - no error at startup boot device

Similar Questions

• 3FO error found no boot device

  Original title: Renabling UEFI Mode error

  Last time I reformatted my PC and disable cause UEFI Mode if I turn it off so I can't format my pc!

  [OS before format: windows 8 pro]
  [OS after format windows 8 pro
  Now after formatting, I tried to solve the UEFi, which disables the traditional way
  and I get error 3FO no boot device found!
  my hard drive works fine!

  Hi Eddie,.

  I suppose that you have an HP computer.  Please see this topic for a possible cause of the failure.

  http://h30434.www3.HP.com/T5/notebook-hardware/my-PC-is-saying-boot-device-not-found-hard-disk-3FO/TD-p/778869

  See also: http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/quot-Hard-Disk-3F0-BootDevice-not-found-quot-Error-Message/td-p/2443931

  Note: Changing the BIOS settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS settings can be solved. Changes to settings are at your own risk.

  I suggest you contact HP support.
  http://WWW8.HP.com/in/en/support.html

  I hope this helps.

• Satellite C650-17Z - only PXE error message no boot device

  Hi people I was wondering if anyone of you kind people out there could help me. I have a Satellite C650-17Z model and when turn on is the message I get:

  + Intel UNDI, PXE - 2.0 (builkd 083) +.
  + Copyright (C) 1977-2000: Intel Corporation.

  + For Atheros PCIE Ethernet Controller v2.0.1.9(12/15/09) +.

  + Check the cable connection! +
  + PXE - MOF: exit Intel PXE ROM. +.
  + No boot device - insert boot disk and press any key.

  Can anyone any sense of the message above?

  Hey Buddy,

  This error message means that an incorrect boot order is set and the computer tries to start between LAN port to the internal HARD disk space. It should therefore go into BIOS setup and change the boot order. Put the HARD drive as the first boot device internal.

  Take a look at this article from Toshiba:
  [PXE error message appears during the clean boot procedure | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=8]

• Error 0X0000007B (inaccessible boot Device) to start.

  From two days ago, about 8 or 21:00 my computer freezes whenever I clicked on any icon or attempted to open anything. Not even all that normally appears as yahoo messenger and all my other programs popped up. After this has is spent several times I went to safe mode and thought at first maybe it was something with the memory, or maybe the computer was going slowly I went into cleaning disk and deleted files. Then, I went in my add or remove programs and deleted some things more freeing space. After that happened, I tried again and still no luck. Shortly after, I went back to the security mode and attempted a full McAfee scan for viruses. It took 11-12 hours and there is no virus. Then, I went back into safe mode and tried to do a restore of the system for a few days back. I've tried twice and both times a screen popped up error after about 3 or 4 minutes for system restore. After some research I found this means cessation critical object, so I tried a startup repair, it said 0X000000F4 (0XFFFFFA8006881BA0, 0XFFFFFA8006881DD8, 0 X 0000000000000003, 0XFFFFF800022E3540). I tried twice and both times it ended around 124545 887104. That was 1%. Then I went back into safe mode and some more the object of research and discovered that using the F8 key I could try solve the problem. The second, I pressed the button repair he opted for another blue screen this time with 0X0000007B (0XFFFFF98000A069E0, 0XFFFFFFFFC0000034, the last two are all zeros. I learned that it was Inaccessible boot Device. I tried to use my last known configuration after return in safe mode and that did nothing. I then went to my device because Manager that all the time I did research we're talking maybe a driver is not updated. I discovered that my drivers are all updated, but my IR devices has a triangle attention beside him. When I clicked on properties I found it saying: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31). I tried many things, and every time that I have either get a blue screen or my attempt does not work. Please help me, if I can't find a solution, I'll be forced to format my computer and restart my computer life. (email is * address email is removed from the privacy *)

  Hi Killace,

  Step 1

  Try the suggestions in the article below.
  http://support.Microsoft.com/kb/922976

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  Step 2

  Uninstall IR device drivers...

  A. Click Start, type devmgmt.msc in the start search box and press on enter.

  B. do the driver right click and choose uninstall.

  C. restart the computer and check if that helps.

  Step 3

  Disconnect all external devices.

  Put your computer in a clean boot.

  The following link has steps showing how to perform the clean boot:

  Note: Please make sure that the computer is configured to start as usual according to step 7 of the article:http://support.microsoft.com/kb/929135

  Bindu R - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite showing C55-5-137: no boot device please don't restart

  Hello
  Just bought a computer portable satellite c55-5-137 and when I start the computer shows this message: no boot device - please reboot the system.
  Tried to boot from usb win7, same message. Also in bios I don't have the option to disable secure boot, the only option is uefi (grayed out). Need help .

  I assume that the HARD drive is not visible somehow for your system.
  When you enter the BIOS disk HARD is listed and detected correctly?
  Try to set the BIOS to default settings and check again.

• Satellite C660-IHK - 'Reboot & Select good Boot device'

  First of all, thanks for any help. I don't know anything about the inner workings of computers, so things, please explain to me how you would do for a baby! Here's the problem: my Satellite C660-IHK is one month. I have not much used, nor had any problem with it. Until last night. I turned it on, the logo appeared as usual, and then it went to a screen that tells me to "Reboot and select proper boot device or Insert Boot Media in selected boot device and press a key. I have no idea what that means or what I should do now.

  On another chance, I pressed 'Set Up', which was located at the bottom of the screen when the logo first appeared. I went to 'Boot '. Here is the info:

  HDD/SSD
  USB
  WEIRD MATHITADVD-RAM UJ8BO
  FLOPPY DRIVE
  LAN Realtex PXE

  On this page, I am also told "choose the priority of the computer starts". Again, I don't know what it should be. Any help would be appreciated.

  Thank you

  You see this message every time when you start your laptop?

  It's a little strange.
  Start your laptop and press F2 to enter the BIOS settings. Use F9 and set it to check and default settings, if the problem persists or not.

  If Yes, restart your laptop and press F12 to get into the boot menu. Check if the HARD drive is listed there. If Yes, select it and press ENTER. Windows starts correctly?

• Error message is Boot Device not found, Hard - Disk (3F0)

  Hello!

  I have PC HP Pavilion dv6 with operativ system windows vista Entertaiment. I got an error as Boot Device not found. Please install an operating system on your hard drive. Disk-hard (3F0) Recovery does not work and received the error 100a

  Please help me

  Kamal

  It seems that the hard drive has failed and needs to be replaced. Laptop SATA hard detail can be used. Just be sure to get a quality at least equal the original in order to use recovery disks. It may be big, but not small ability more. For example if you have a 320GB hard drive you can use a 500 GB hard drive but not a hard drive of 250 GB.

• Satellite C650D problem hard drive - no boot device

  No boot device, please insert the boot disk and press any key any... and yet once again and again.

  It is not a problem to make a recovery, but it is each to come a few days again.picture freezes, everything stops, and the black window is forthcoming with this info...

  And of course support Toshiba does not Saturday... any solution for this weekend?

  I fear you're right m.

  If you n t know how to find nearest provider for service Toshiba Toshiba support page visit - http://eu.computers.toshiba-europe.com > support & downloads > find an ASP.

• Satellite on L9W - B Mini - Inaccessible Boot Device

  Hi all

  I installed win10 and decided to do a complete reset that I gave this computer to someone else to use.
  After the reset, it does not start properly and fails with an "inaccessible boot device message".

  I created a USB boot with a version of win8.1 to install, but no touchscreen or keyboard works, so I can't go ahead with the installation.

  someone had this problem? I want to refer to toshiba that I'm tired of this device

  Thank you

  Hi, I installed Windows 10 and reset mine causing this problem, it seems Windows 10 upgrade does not work properly.

  The drivers for the keyboard and touchscreen are not standard, so are not integrated to the version 8/10 bootable usb. You can get a normal usb hub usb microphone and plug in a usb keyboard/mouse to go or if you have created a recovery drive as Toshiba tell you in the instructions it will actually contain the right key drivers.

  To boot from the recovery disc press FN N (F12) as soon as the machine is running and the Toshiba logo shows, and he will give you the option of what to start from.

• Satellite A100-233 - error that unrecognized USB device

  I have a problem with my USB ports, they where working fine but all of a sudden they start gives me error that unrecognized usb device. I tried to reinstall XP but still the same.

  Can someone give my solution to this problem?.

  Hello

  You have yellow exclamation marks in Device Manager?
  I had a similar problem with the USB ports a few years ago. I removed the ports in Device Manager and reboot the laptop. The USB ports will recognize again.
  Furthermore, I reinstalled the latest chipset driver and everything worked well.

  The latest chipset driver download on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good luck! :)

• Satellite L750 - gray screen at startup

  Hi guys,.

  I have Toshiba Satellite L750 slightly less than 2 years. He developed intermittent problems, when starting it arrives with white/grey screen and disappear when the login screen is ready. Sometimes touching the upper left part of the disappears from the screen it. Other wise I have to keep restarting. I have checked the cable connections between screen and motherboard, and they seem good.

  I have also connected my laptop to an external display while it shows the gray screen and the external display. The screen is not cracked or the other.

  Help, please. Thank you

  Googling around you can find a lot of discussion on various forums on similar problems and many different explanations why something like this can happen. On this virtual path, it is not easy to say what may be wrong with your laptop, but it is certainly the unwanted material.

  In my opinion you should either continue to use your laptop until it can be possible and later when the issue gets worse search solution or contact the nearest service Toshiba and ask for help.

  Guarantee is generally of 2 years (depending on the country) but if you opened it on your own guarantee is canceled now.

• How can I fix this error? Available boot device. YOUR 0: Installed; YOUR 1: Installed; YOUR 2: None; YOUR 3: no

  I can't use my desktop pc, because this message appeared when I started my pc since the closure.  Help, please!   I'm not very computer savey.

  The message should look like this:

  No available boot device:

  SATA 0: installed

  SATA 1: installed

  SATA 2: no

  SATA 3: no

  This means that there is a problem with your hard drive. If, in addition, the message is not be displayed correctly, there must be something else wrong with your computer. You will need to bring to a repairman.

• Latitude 6420 after withdrawal of hard drive and put it back: no found at startup boot device

  Hello!

  Dell Latitude 6420

  I took out the original disc where I run Window 7 to check a few specifications written on the disc. When I put it back in the machine to turn on and start the machine it says: no boot device found.

  Diagnostics of the BIOS is unable to find either disk rhe. When I plug the drive into a usb disk drive in another machine, I can see that all date is there.

  Help! What should I do to make the machine recognize the drive again?

  Best regards

  Arnstein Aas

  Hi Arnstein,

  If you do not see the drive in the diagnosis, the BIOS is not able to see the drive. So I think that there is a connection problem. I would like to try remove it and put it back.

• U840-111 satellite shows an error at startup

  Basically, I was using my laptop computer and suddenly, he crashed and grew the "blue screen of death" I restarted and let the restore program starting run.

  After that he had finished he kept makes this message 'there is a problem because of evil to disconnect a device as an external hard drive. If this message persists, contact your hardware vendor... I tried to reboot several times but nothing helped. I think I might need to restart using a boot disk (which is a problem that the laptop didn't come with an os disc) or even take it to be repaired.

  Any advice.

  Stand by.
  According to specification your U840-111 was delivered with Windows 7 Home Premium 64-bit pre-installed. Original recovery image is saved on the HARD drive and it is strongly recommended, and described in the user s manuals document the laptop owner should create recovery media that can be used if the disk HARD recovery doesn't work.

  For notebooks without optical drive, it is clearly described that recovery media bootable USB can be created using preinstalled Toshiba recovery media creator tool. So first question: you created this bootable USB key?
  >... and let the start of the restoration program managed
  Do you mean that you have started the HARD recovery disk image installation?
  > I use a USB boot drive.
  Does that mean exactly?

• Installation of Satellite L750 poster error recovery

  Trying to get back to the factory settings but displays ERROR: 10-FC12-0003. Help, please

  You have posted another thread here:
  http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=256003
  the laptop was not able to start the system, I think that this problem could be linked to this error message.
  Possibly the HARD drive is faulty or something wrong with the memory

  Are you able to boot other disks like Win XP, Vista or Linux?