Satellite L750D and factory reset - HDMI still doesn't work do not

Similar Questions

• Satellite U400 and factory reset

  I'm having a problem regarding my HDD RECOVERY, which is not present in any option when I try to factory reset, no assistants or something...

  Here are some photos of HARD drive recovery, and as you can see the disk RECOVERY file HARD is in E (4 GB).

  http://s1301.Photobucket.com/user/louiemnb/media/1_zps13fda4d4.jpg.html

  Here is the picture of my computer management where you can find my recovery partition... uh when I try the F12 thing, there was recovery options the other 2 HARD drive but when I click on the HARD drive option, his does not.

  http://s1301.Photobucket.com/user/louiemnb/media/2_zps593ec16a.jpg.html

  Hello

  On this older machine there is not some sort of recovery partition. Recovery image is recorded on the second partition of HARD drive in the folder called HDDRecovery.
  Recovery image installation can be started as described on-
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R02.htm

  Start your laptop using F8. S repair your computer option available or not?

• Installed El Capitan, Mac Mail still doesn't work do not!

  Its been 2 weeks now since I posted about this problem and it has not been a solution or condition that works. I'm starting a new post because the previous is loaded with pages of log files (which have not been answered to) which are simply to spoil the simple problem that Mac Mail does not work with El Capitan for some reason any?

  
  

  Here is the problem:  Mac Mail is still not loading new emails automatically or are all sent messages save or synchronize my Imap Server account.  When I quit and restart Mail the new content is available to and updates the mail for the first few minutes, then it stops to date?  The fan runs as fast when the mail is enabled.  Activity Watch monitor Mail consumes the majority of all CPU, energy, drive, and memory.   All other devices, my Iphone, and another computer running OSX Yosemite with the same Imap e-mail account properly.

  My setup: I don't have an Imap account, I have an early 2011 Macbook Pro 17 "with 16 GB of ram and an added SSD drive like the HD primary with a second (original) hard drive installed into the CD slot.  My mail server is at the pair.com

  Here's what I've done: cleaned up all unwanted files and Recycle Bin, deleted all the log files and rebuilt and reindexed mail.  Reset the Pram and NVram, reset the SMC. Repair hard drives and permissions. Remove the account from the post office and then reinstalled clean.

  I spent weeks on this problem without success, it can be addressed with an update rather than teach me how to be a programmer and fix this problem myself, I hope.   I hope someone out there (El Capitan authors) can help me fix this seamingly simple and isolated? I have no other problem with El Capitan.

  Thank you

  John

  You happen to have installed antivirus software? I had a similar problem and when I uninstalled my Norton (not only disenabled) software my e-mail problems disappeared.

• Re: Satellite A200 - 23 X: functions of keys doesn't work does not correctly

  Dear friends,

  I have the Toshiba A200 23 X I installed Win XP + SP2 and everything seems to work fine, except when I press FN + F6 F7 0r which increase or decrease the brightness of the screen, nothing happens. The first function keys (power speaker, stanby,) works. If anyone can help me.

  I know this question, I guess that your laptop has been pre-installed with the Vista operating system.
  Am I wrong?

  Portable Satellite A200 series needs a BIOS update to the XP version if a Windows XP operating system has been installed. Please check the European driver Toshiba page and you will find the good BIOS XP.

  After update BIOS your FN buttons should functions still

  Check it out!

• Flash made by still doesn't work do not on wix

  Hello!

  I have a lot of experience with yet. Currently, I need to create a Web site for the school and I do on wix.com wix is supposed to accept flash (.swf) files, so I made one on yet. It's very simple: only a menu driven from the texhnology tab. Nothing complicated, just the motion menu. I did and it worked perfectly. When I download on wix and put it, the flash does not work: it's just a black box. I've made several versions (1920 x 1080, 1080 x 720, flv...), but none of those who worked. I really envy of good quality so help me please

  Thank you!

  If you spend just a minute or two looking at the support section of the wix website, it says that your swf file doesn't have links to external files (what does the swf again)...

  http://support.wix.com/index.php/The_Wix_Editor/media/SWF

  It seems that wix does not support this capability, or if they do, they don't document how. They also specify that they provide any kind of support for swf files created on the outside, such as those you create in still. WiX maybe isn't a service, you should use.

• My sndvol32.exe file is missing how to install this program.still doesn't work no not at the moment until we can do.to open again my sndvol32.exe file

  ------

  See my reply to your post later.
  MS - MVP - Elephant Boy computers - don't panic!

• HP ProBook s 4530: hard reset and factory reset the same thing?

  Hello

  I wanted to know if the hard reset and factory reset are the same things?

  my laptop does not light and I discovered that I can reset hard, but I don't want any of my data on HDD to erase. is this possible?

  (I stop before so there is no data on the RAM)

  Thanks in advance.

  Hello

  No, the factory reset will bring your machine with status (time opening the box) byt hard reset will not.

  Kind regards.

• I lost the code for the option menu 'limitations' of the iPhone 4, how can you do then? so I can come and factory reset, it is a 4 digit code, so I can be able toexample factory reset the phone, don't know if this is the right forum for my question but

  I lost the code for the option menu 'limitations' of the iPhone 4, how can you do then? so I can come and factory reset, it is a 4 digit code, so I can be able toexample factory reset the phone, don't know if this is the right forum for my question but

  Sorry, but the restriction password cannot be reset, it is part of the backup and restore a backup that was taken after the restrictions were activated, restore this code again.

  You will have to start without the help of the data backup, configure the phone to factory settings and start over. Follow the steps mentioned in this article:

  Use iTunes to restore your device to factory settings - Support Apple iOS

  If you lose or forget your password restriction, you must erase your device and then put it up as a new device to remove the restriction password. Restore the device by using a backup does not delete the access code.

  copied from: Sur les Restrictions (parental control) on iPhone, iPad and iPod touch - Apple Support

• Whenever I click on any button of the trial download on the adobe Web site you I get redirected to a page where the 4 squares are moving to load the page, but never load it, I left my browser on for hours and yet it still doesn't work anyone can help?

  Whenever I click on any button of the trial download on the adobe Web site you I get redirected to a page where the 4 squares are moving to load the page, but never load it, I left my browser on for hours and yet it still doesn't work anyone can help?

  clear your adobe.com cookies or use a different browser.

• I ran the system analysis tool and without result updates still won't work.

  * Original title: Windows 7 updates

  It seems I'm not the only one having problems with the updates of Windows 7. I ran the system analysis tool and without result updates still won't work. Is it possible miss me a the question .dll file not showing? I googled about it and still nothing.

  Appreciate any info someone might have on this

  Are there specific error messages or error report numbers given when it fails, or is it just apparently running, but does not find anything?

  If it is running, but apparently not finding anything, just leave it for a while 'loooooong. It was reported a few recent Wu take many hours to find anything, esp if she has a lot of updates to find and install.

  If its reports an error/message number, what (exactly) do report?

  Something to try:

  Update your anti-virus software and run a full scan. Then:

  If its doesn't work, check that service 'Windows Update' and 'Background Intelligent Transfer' are listed and running, according to the instructions of the ' how to check if services are running' section of this article - https://support.microsoft.com/en-us/kb/2730071 IF you have actually the error referred to in article, try the FixIt.

  If WU and BITS services are listed and running, try to reset the Windows Update components - https://support.microsoft.com/en-us/kb/971058

  If still no joy, run the update utility - http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Update-troubleshooter what makes as that report?

• with firefox 43 yahoo and yahoo mail doesn't work does not correctly

  With the help of win 7 and firefox 43.0.1, I have 4 computers and now all have problems with yahoo and yahoo mail doesn't work does not correctly. Loading sites, but most of the features are missing and clicking on what whether changes to the lists of text. I have disabled flash / anti-spam etc., cleared cookies and cache and even firefox loaded down once again and have upgraded, no help. I'm forced to use IE now.

  I tried Yahoo support, they said try Firefox... In any case, it's Firefox and I found a solution using the 'Refresh Firefox' button. Whatever the problem was fixed on two of my computers so far. Got to update my setting again but it's 10 m, compared to the 10 hours I spent trying all that is nothing.

  Thanks for the help!

• a sentence installed updated software, "OSx recovery software update" and the overview application still refuses to work however I try to launch it. He started and left immediately after recovery immediately, she leaves, she shows also a no document error

  I just installed new updates of software, "OSx recovery software update" and the Preview app still refuses to work, however I try to launch it. He launched and immediately closed unexpectedly after unexpectedly WARNING recovery he immediately left again, it also shows a notice of error document

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Step 1

  For this step, the title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

  Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  Step 2

  In the Console window, select

  DIAGNOSIS AND diagnostic USE information reports ▹ user

  (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway.

  If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

  When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• spell check doesn't work is not in outlook on windows 7

  Hi the spell checker doesn't work is not in my outlook for windows 7. This can be corrected?

  Sincerely, Robert H.C.

  Outlook.com has a manual spell at the top next to the options button control. It won't appear that if you write an e-mail AND if your browser is not checking spelling himself. In most modern browsers the spell checking is done by the browser itself and may need to be enabled in this browser

  http://email.about.com/od/windowslivehotmailtips/Qt/How_to_Use_the_Windows_Live_Hotmail_Spell_Checker.htm

  You may need to activate in your browser

  Google chrome
  http://support.Google.com/chrome/bin/answer.py?hl=en&answer=95604

  Firefox
  https://support.Mozilla.org/en-us/KB/how-do-i-use-Firefox-spell-checker

  IE , it depends on the version you have.

  http://blogs.msdn.com/b/ie/archive/2011/11/08/typing-with-speed-and-accuracy-in-IE10.aspx

  For additional amount IE 10 tips https://ie.microsoft.com/testdrive/Browser/SpellChecking/Default.htmll

• LR 5 doesn't work is not on the new Macbook Pro.

  LR 5 doesn't work is not on the new Macbook Pro.  Have tried 2 CC downloads, download licensed 5.6 and 5.5 download licensed, all the results in the same thing.  It comes up with the screen base but no signs and gives that an error occurred when changing the modules.  Nothing I have tried seems to help.  He also said "start with lightroom mobile at the top on the left, although it said it's Lr 5.6.  Anyone else having problems?  Calls to adobe are no help and have to wait until Monday for technical support.  Surely this must run on a NEW laptop with any other installed software!

  Setup logs was very good.  Application installed but is not working properly.  Finally got Adobe support and it turns out be a file permissions error.  Had to add applications and myself as accessors of the Lightroom folder under ~/Library/Adobe/ path and set permissions to read & write (was read only for everything except system) and apply to all the cases closed.   Works fine now.  Including this here in case when someone else is going through this issue.

• DNG Converter doesn't work is not on a camera called raw photo

  DNG Converter doesn't work is not on a raw photo camera that always comes back with this Message "check if the camera is recognized.   "

  Supported cameras Camera Raw plugin | Compatible cameras