Satellite L755D-10U - I want to restore to out of box state

Similar Questions

• Satellite L755D-10U: Wireless Communication switch and fixed to off

  Satellite L755D-10U part number: PSK4YE-00J00HEN

  I've had this laptop since June and have been very happy with it
  Last night no reason apparent, the wirelsss set itself off and I cannot turn on again.

  Have you looked in the settings of the flash memory card - everything is ok

  Any help would be appreciated I need to be able to use the wireless function.

  Hello

  The WiFi network can be switched on and off using the FN + F8 function.
  Did you check that? Note that Fn + F8 turns and BT too so don't forget that Wlan was chosen and not BT!

  But the Fn + F8 functions if the WiFi card driver is correctly installed.
  If there is something wrong with Wlan driver, then the Fn + f8 would not work too.

  This is why an update of the driver might be useful too.

• Re: Satellite A205-S5000 - restore to out of box

  I have a Satellite A205-S5000 & I want to restore it to out of box. I can see the "Toshiba System Volume" when I try to create a restore point, but I can't my machine to go to do the restore.

  Any advice will be greatly appreciated.
  Thanks Dave1958

  > I have a Satellite A205-S5000 & I want to restore it to out of box
  This seems to be a Toshiba US series.

  Here, I found the manual for this device.
  [Manual satellite A205-S5000 | http://cdgenp01.csd.toshiba.com/content/support/manuals/userguides/su1931068/SatA200A205_GMAD00130010_07Apr23.pdf]
  Here you can find instruction how to recover the device

  To recover the disk HARD using the disc utilities stored on HDD monitoring this statement:
  -Be sure that the laptop is OFF
  -Press and hold the 0 (zero) while turning on the laptop. Then the Toshiba Recovery Wizard should start.
  -Then click on recovery of factory default software and press next
  -Follow the next steps and the instructions on the screen.

  If this does not work, then you will need to order the recovery for US disc series.
  Here is the link:
  https://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/serviceUnitVerification.jsp?orderType=SFF

• Satellite L755D-10U: cursor blinking after replacement of Wlan

  I have a L755D-10U with the built-in - wireless Mini PCI - E (1/2 height) a Realtek 8188CE card.
  This card is about the worst piece of technology that I met.

  It works when it wants to, but as soon as I started working hard, he decided to abandon the connection and fail completely to the I disable and enable - by software or by + key combination.

  I finally had enough and decided to replace the card with an Intel Centrion Advanced - N 6200.
  I put in the laptop, turn on and...
  ... BIOS screen, then just a cursor flashing at the top on the left and a 100% locked the system.
  It's nothing to do with Windows as the same thing happens if I remove the hard drive.

  No idea why this should be?
  I can see no sign of updates to the BIOS for this laptop, but can't believe that Toshiba would limit the material which can be used as a replacement for their machines.

  > ... BIOS screen, then just a cursor flashing at the top on the left and a 100% locked the system.
  > Has nothing to do with Windows as the same thing happens if I remove the hard drive.

  What happens if you remove the new card Wlan?

  You can switch the BIOS screen and is Notepad starts the windows correctly?

  If the laptop would be able to start without Wlan card inserted, then it means that the new Wlan card is not compatible. This could cause your problem

  In this case, you would need to remove the WLan card and need to use another compatible Wlan card.

  By the way: this is an interesting document from Toshiba which offer a solution to the question: + Wireless Lan (Wi - Fi) drops or disconnects completely. +
  http://APS2.toshiba-tro.de/KB0/TSB12033H0001R01.htm

• Where can I order a recovery for Satellite L755D-10U disk

  Hi, my son bought a L755D-10U Satellite in July 2011, two days ago, I turned to see failure to look me in the start screen. I can not even recovery is pretty scary, because it suggests that there is a hard drive problem. Could I have some help and suggestions here please you that while I can understand what is happening on my computer two weeks ago, my own equipment is 9 years old and has been planned, however, my son is 3 months old and should not have any problems at all.

  Thanks in advance
  Tuppence:0)

  This page;
  http://backupmedia.Toshiba.EU/landing.aspx

  Welcome them

• Satellite A300-1lT - I want to restore Vista with recovery option

  Hello world

  With my Toshiba nothing but problems. First of all, I waited replacement screen for months cause it wasn t all at the warehouse. K, after that I went down to XP but pilot are buggy, sound is poor, cannot get USB 2.0 to work, the system is slower that Vista so I decided to go back to Vista.

  But of course, there is no DVD so I need to restore via the restoration of HARD drive folder that I have. But cool, Toshiba doesn't let me to download the utility to create a backup DVD. So what can I do? I have HDD Recovery folder, how now create DVDs without utility that first of all they gave me.

  PS.
  You can say s not Toshiba fault; you did that blah blah. Of course, but first I waited replacement screen, I have original Vista DVD by wasn t given, I can't even download Toshiba utility. What sad piece of equipment. I have the experience, my first OS installed was BACK and Win95, many OS installation, after that, but I install back my OS in 2009 would not be hoping that its going to happen.

  All the ideas you good ppl

  Sorry mate, but in this case you need a new recovery disk. The HDD Recovery folder is not useful to you because you do not have Windows Vista and as you already know that the Toshiba recovery disc creator cannot be downloaded.

  You must order a new disc of a Toshiba authorized service provider directly:
  [https://backupmedia.toshiba.eu/landing.aspx]

  To be honest, this is not a problem of Toshiba. If you start the laptop for the first time, you get the following message and should not be ignored:

  + Important INFORMATION +.

  + your system is equipped with a hard drive recovery system. If you need repair.
  + your computer in the restaurant to original factory State, you can do it directly.
  + HDD (press F8 when you start your computer, choose "Repair your computer" +)
  + and follow the instructions in the menu) or create a media drive bootable recovery to that end. +.

  + Toshiba recommends you create recovery disk medium uses the "Toshiba Recovery Disc Creator' to ensure the +.
  + Hat you are able to restore your computer to the State of origin, installed at the factory, even if your computer +.
  + Gets severely damaged.

• How to restore my computer toshiba laptop out-of-box state?

  A few days ago I received a notification window report a problem with my operating system (although it's practically new) in my laptop Toshiba Satellite 15.6 "3 GB 320 HD. After not being able to open ALL the files in my office (ex: icon workstation), task bar (the ex icon) or even start menu (e.g. Control Panel), I decided to restore my laptop to an earlier configuration, when the problem was not present. At the end of the restore process, I received an error message. I restarted my laptop again and the problem continues (not being able to open the files, applications, or programs). I then decided to restore my laptop with the option of deleting is not my current data. Out of 47 process had to be done, my set up spun without progressing to the #3 / 47 (display of SMA - I think). Although I was warned not to disrrupt the process, I forced my laptop turned off after 30 minutes.

  Now, when I try to boot my laptop, I get a message that my computer is preparing for first use; When I get to the 'Welcome' screen, my session runs without procedure. After forcing my laptop off and restart my computer several times, I left my laptop computer spinning during the night and when I woke up, I could choose, "Administrator" or "guest user". When I click on "Administrator", a screen will appear indicating that I don't have permission to enter this environment. When I select "Guest user", I have to enter my username and password. Although I never created a password for this laptop, I'm not allowed to login without password.

  I am now trying to restore my computer laptop out-of-box settings, but when I try to hold F8 at startup, I don't have the option to select the recovery settings, as I already did when I tried to restore my laptop to an earlier configuration.

  For Toshiba, you press and hold "0" while turning on the computer...

• Average recovery creating Impossible on my Satellite L755D

  Hello

  Try to create recovery disks for my Satellite L755D-10U through toshiba bulletin board, but whenever I click on the icon to create a recovery media, I get an alert that says:

  the creation of means of recovery is impossible!

  Not found the HDD Recovery folder on the second disc of the first hard drive. There is no valid Envirenment recovery of HARD drive on this computer.

  My best friend has exactly the same laptop that I bought at the same time (sad, I know) but its made fine records. I don't do anything else, can anyone help me, does anyone know why mine does this?

  Thanks in advance

  Still is it that creation of recovery utility Toshiba doesn't have access to the recovery image stored on the HARD disk.
  Unfortunately, nobody here can tell why.

  I put t know what did you do with your laptop, but I presume that you have changed the structure of the partitions or perhaps somehow remove HARD drive recovery image.

  If your friend has absolutely the same notebook (the same part number (PSK4YE) that it can create this disc of recovery for you and you can use it on your laptop. If this isn't the case, you have a problem.

  Please send comments.

• Satellite L755D - back to Windows 7

  Hello

  I installed windows 8 on my laptop L755d and I want to restore it to windows 7 (factory setting) using the partition. I followed the steps I did the other times (press F8 and select Repair) but based now on what the key does nothing.

  Any help please?

  After the installation of clean operating system you cannot use recovery partition to install the recovery image. You can do this by using only a recovery media.
  You have created recovery disks?

• I want to restore my computer to factory specifications

  Original title: I want to restore my computer to its state when it was taken "on shelf".  How?

  I have a Dell laptop gave me my grandson.  He has "stuff", I have no interest.  I would like to "resurect it than it was when it is brand new."  Don't need its programs, games, etc.

  Good plan!

  See How to restore or reinstall Windows on a Dell computer

  You want to 'Step 2' unless the laptop is so old that he must use 'Step 3'.

  (And, of course, you don't have to do all the "backup and restore important files and data" because you want to get rid of all this.)

• Satellite L755D-11W: cannot change the graphics chip in the game settings

  Hello

  On my laptop Satellite-L755D-11W, in some games and applications does not change the graphics chip. Otherwise said, at the time to choose the right game, I want to put a high-performance and change AMD Radeon HD 6400 M-> AMD Radeon (TM) HD 6520 G, click Save... but the settings are not saved and the AMD Radeon (TM) HD 6520 G is not selected for the match (())

  This happens not always, but often in the games and 3DMark2011.
  Drivers for video cards are the last who are on the Toshiba Support site.
  Official website of the AMD driver only is not supported (())

  Please help with this problem!

  Hello

  L755D-11W uses the AMD Radeon HD 6470 M graphics chip.
  So what GPU belongs to the Radeon HD64xx series and I don t think you could choose a series superior GPU (AMD Radeon (TM) HD 6520 G) in the properties of the game if the GPU is not supported.

• Satellite L755D-10N - noise muffles watch movie

  If I watch a movie on my laptop Satellite L755D 10N PSK4UE, Win7 64 bit) sound often cut (only 4-5 min after the start).

  BUT:
  If I connect a speaker / headphones and disconnect the sound comes back.

  I downloaded to leave [this driver: http://www.toshiba.hu/innovation/download_driver_details.jsp?LNG=23&service=CE&selC fulltext = 2 & selFamily = 2 & selSeries = 178 & selProduct = 646 5 & selShortMod = 2965 & language = all & selOS = 30 & selType 4 2 = & yearupload = & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = all & selectedLanguage = all & type = 42 & page = 1 & ID = 79 506 & DISO = 30 & driverLanguage = 42] site Toshiba but this driver didn't fix my problem.

  What can I do?

  Thank you
  Gabor

  How have you tried to install the audio driver?
  Has uninstalled the previous drivers installed before you begin with the installation of the new?
  You must uninstall the previous audio driver installed permanently.

  Go to Device Manager and expand the audio, video controllers, game zone
  Here you will find audio devices. Here, you have to remove/uninstall the driver.

  Then expand the area of Systemdevices
  You will also find the definition audio HD controller. This device should be deleted also.
  Then, you have to restart the laptop.
  After restarting again, wait for the deleted devices were recognized again and then install the mentioned audio driver Toshiba driver page.

  Note: You should also check if your Windows 7 system is up to date! All patches and updates must be installed!

  I had the same problem with my laptop Tecra running Windows 7 and mentioned workaround solution has helped to solve this problem, and that's why I put t think its hardware problem.

  I'm not very well if this workaround works in your case, but you should check these steps of m.
  Worth case you will need to use the Toshiba recovery procedure to restore the laptop to factory settings.

• Satellite L40 - 10U - does not start

  Hello

  My Satellite L40 - 10U won't boot to the top. I turn it on, fan, DVD-ROM, battery LED works. Hard drive LED flashes only once (if I'm lucky). The screen is blank, in the light of the Sun, I noticed it darkenes lit, but no other activity (I tried external, still nothing). I also tried the trick with removing the battery push the power button, and plug the charger, etc but still nothing.

  Now, I noticed that when I remove the Rams (or try connecting only once in time) it still does exactly the same thing, so I want to make sure if it is a problem with the Rams dead? Is there a way to check the Rams without connecting to another obstacle not tariff (I did not)?

  > my Satellite L40 - 10U won't boot to the top. I turn it on, fan, DVD-ROM, battery LED works. Hard drive LED flashes only once (if I'm lucky). The screen is blank, in the light of the Sun, I noticed it darkenes lit, but no other activity...
  And what happens at this point? Laptop will stay on or get OFF automatically?

  By the way: check it please http://aps2.toshiba-tro.de/kb0/TSD57013H000JR01.htm

• Satellite L755D: black screen after startup or switching of external monitor

  I have a strange problem with my Satellite L755D. I normally use an external monitor that works very well.

  If I want to switch to the laptops monitor using Fn + F5, the laptop monitor remains dark, but you can see (more guessing) office.

  Just the bright background lights. Same thing if I boot without the external monitor. In the beginning (phase BIOS?), you can see the normal symbols, then the screen turns to.

  Funny, is that these two problems do not appear when I cut the power supply and the laptop runs on battery only.
  Any ideas, what the reason could be?

  Thank you
  Mason

  Funny, is that these two problems do not appear when I cut the power supply and the laptop runs on battery only.

  Maybe you should check the configuration of power plan that is used only in battery mode.
  It might be possible that the backlight settings have been set at a lower value by using the power of the battery.
  I recommend you to check this in the ATI catalyst and windows power options.

• Connect FireWire to a Satellite L555-10U

  Question: How to make a firewire on a Satellite L555-10U connection?

  Hello

  As far as I know that this laptop doesn't support firewire port.
  If you want to connect to an external device which supports a firewire interface, then you must use USB firewire adapter or cable like this
  http://www.USBFireWire.com/parts/RR-28107big.jpg

  Welcome them