Satellite L755D-128 - having to reinstall USB drivers whenever I start my pc

Similar Questions

• How to move a local network printer without having to reinstall the drivers

  Hello

  Is it possible to change a printer to a network printer on a local printer without having to reinstall the printer drivers?

  The computer on which the printer (a Lanier LP116c PCL 5 c) is currently connected [directly] is running Win XP.  It is a stand-alone computer without any connectivity; network, internet ect.   He has no printer drivers installed because the computer had been connected to another computer by using working groups and was able to print at the Lanier through working groups.  But now that there is no longer connected to the 'network', but rather directly connected to the printer, it will not be printed.

  I tried to change the properties of the driver to "tell the computer" that the printer is now connected directly however when I try to open the properties I: "printer properties cannot be displayed.  The print spooler service is not running.

  How to 'know the computer' that the printer is now connected directly without having to reinstall the dirivers?

  Thank you!

  Carrie

  You have two questions.  One is assigning the correct port for the printer and the other is fixing what is originally the print spooler service to not run.

  As much as I can give you guidelines on how solve the second problem, it will be much easier for you to uninstall and reinstall the printer (once the print spooler works again) that in order to create a "USB virtual port" which is what needs to be done unless the computer was once a printer connected by USB is installed.

  Often, but not always, an order print spooler is the result of a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

  AntiMailware MalwareBytes
  SUPERAntiSpyware

  Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

  Cleaning of printers

  NOTE: If you have ever had (but retired) a Lexmark or Dell - badged Lexmark printer installed, the command "net start spooler" to step below may fail.  In this case, type the following line in the black command prompt window and then type the command "net start spooler" again:

  dependent on the spooler of sc config = RPCSS

  Note that there is no space before the =

  If still no joy, use the alternative method that is linked below.

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.

  Alternative to the method of his first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

  Once the print spooler has started, click Start > printers and faxes, right click on the Lanier printer icon and select properties and select the Ports tab.  If you already have a USB connected printer installed on this computer, there should be a port named USBnnn.  If there is, check the box and OK your way out and your printer should now print when connected by USB.  If there is no USB port listed, then do the reinstall as explained in an Article.  The driver install package available here should create and install the USB port for you: http://www.lanier.com/downloads/driverFrame.aspx?path=http://support.aficio.com/bb/html/dr_ut_e/lan_u/model/c30e/c30een.htm

• Satellite L500-128 - where can I get drivers for Windows 7?

  Hello

  Recently, I bought Satellite L500 with Windows Vista. I hope that make Windows 7 drivers Toshiba soon so I can install Windows 7 Professional on my laptop. Why does take so long?

  Pilots would come I have a few weeks or should you wait until next year?

  Great, from the Netherlands!

  Hi Dennis,

  First of all I'm pretty sure that Toshiba will come out Windows 7 for this model because I created this: http://aps2.toshiba-tro.de/kb0/KBA9A02PX0000R01.htm

  I think that nobody can't say how long it takes until that Toshiba will get the drivers for this model now, but I can understand that not all drivers can be released in one or two days. I guess that Toshiba test riders before they download them and it takes a bit but I noticed that every day more and more drivers for Windows 7 will be available to check the Toshiba page from time to time.

  About Windows 7 drivers on the page United States it of really nice to read that you founded another model with the same specifications then I guess that readers should also work on your model. I m waiting for a feedback on your part because I m thinking purchase Satellite L500 for Windows 7 too so it would be very nice to read your experience with the drivers here. :)

• Satellite L755D-128 does not load

  Hi guys, first thread here. Can't see its been covered yet.

  I live in Greece for a summer season and a few months ago I went to put on (it was low on battery power).
  I plugged in the charger, but has met with no fees or lights or anything. Tried a different outlet, still nothing. I tried several.

  I get a negative reading of 19,28-volt charger, 3.32v with the voltmeter on both terminals battery (laptop upside down) on the right and the first three shorts. If negative is on and in terminal and positive on one of the two most left, he reads a variable less than 1v.
  There is no lights on display and even with the charger and battery removed, nothing.

  Shouldn't it work on only ac? Im a marine engineer can thus weld not etc, but I'm no computer Wizard.
  Does this sound like a problem with one of the processors inside and (probably) of many regulators?

  I'd like to get it going again so I can set the music on my phone outside!

  Cheers for reading, I hope that we can find a solution.

  Best regards, expectantly, George

  Shouldn't it work on only ac?

  Yes, the laptop has no battery if the AC adapter is plugged.
  So even if the battery would be deleted, the laptop should work correctly using the AC adapter.

  I can not tell you what's not here, but the fact is that if the AC adapter is working properly and the laptop does not power upward, then there must be a problem with the internal parts of the laptop as RAM modules, card mother etc...

  Faulty motherboard cannot be resolved (or maybe it could be fixed with a wiring diagram, special tools and enough experience)... Cases of dysfunction of the motherboard, you need to replace it, but it will certainly be a costly affair.

• Series USB drivers does not start error: "this device cannot start. (Code 10) »

  Hello

  I have a usb_dev_serial.inf of TI and a catalogue of security usb_dev_serial_amd64 and a folder containing the amd64
  the DLLs below.  When I used the Add Hardware Wizard to load the .inf, properties of the pilot were "this device cannot start. (Code 10)"
  Does anyone have a suggestion?
  Thank you
  Larry

  Hi Larry,

  Thanks for posting in the Microsoft Community Forum. According the description, I understand that the USB device does not work, rest assured that we will do our best to help you with this problem.

  Answering the question that helps us provide the best solution:

  1. it worked before?
  2 have had any changes made to the computer before the question?

  The Code 10 error applies mainly to the problems of hardware driver and devices or compatibility problems between the drivers of equipment and additional software that is installed in Windows. Therefore, we recommend that solve you these problems with emphasis on device drivers, configuration of device problems and hardware compatibility issues.

  Try the following and see if it helps.

  Method 1:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers:

  http://support.Microsoft.com/kb/943104

  Method 2:

  Install the latest driver for USB and check if that helps.

  To do;

  a. click Start, type devmgmt.msc in the start search menu.

  b. right-click on the USB device and click on Update driver software.

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3:

  Try connecting to another USB port and check if it helps.

  Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.

• I need to reinstall Flash Player whenever I start the computer

  It happened only two days ago, the flash drive fails to run when content internet brwsing. I use IE 9, I didn't install any new program, the same configuration of security/antivirus for 1 year. I have re-installed Windows 7, but the problem persists.

  I also tried all the recommendations in other discussio, but nothing has worked. Evedrytime, I need to uninstall and reinstall Flash.

  A cure for this event?

  Looks like you can run in a permissions problem.  Could you please try going through the steps listed in this FAQ:

  How can I fix Windows with Flash Player permission problems?

• Intel Chipset and USB drivers won't install properly - no equivalent for Windows 7?

  Compal CL51
  2 GB RAM
  32 bit Dothan CPU Intel Pentium M clocked at 1.8 GHz
  ATI Mobility Radeon 9700 graphics card
  100 GB HD
  Windows Experience Index: 3.4

  I was able to install Windows 7 Pro on my CL51 compal without any apparent hitches, except these:
  Intel (r) 82801DBM LPC Interface Controller 24CC
  Universal host controller Intel (r) 82801DBM USB 24 4

  In addition, the function keys volume control does not even if the function for dimmness keys work. Maybe it is something chipset - I don't know because there is no other broken/alerted devices in Device Manager.

  The LPC just shown as an unknown device without no driver interface. I sailed on the drivers from update-> Let me pick-> see her-> everything surfed down for intel and the LPC interface. To paraphrase, he said that it was "not guaranteed to work with System 7. Are you sure you want to do this? Your system might break. "I did anyway and now it manifests, but I don't know its proper operation, although he says he is.

  The USB thing pops up, but then when I unplug the device that seems to use it (TrendNet Clearlink for Skype - model TVP-SP2) you get a triangle of yellow alert on Device Manager. It does not recognize when I plug it in. When I look at its properties in Device Manager, I get this in the status of the device: "Windows has stopped this device because it has reported problems. (Code 43) ». There is no "troubleshooting."

  The windows supports 43 page Code issue is unnecessary, pointing vaguely to the manufacturer of the device or intel - I can't be sure. (http://support.microsoft.com/kb/310123)

  Code 43
  Recommended resolution

  One of the motors controlling the unit notified the operating system that the device has failed in some way.

  If you have already run the Troubleshooting Wizard, you can view the documentation for the hardware for more information about diagnosing the problem.

  The only "documentation" that accompanies this was a quick start and user guide. It works halfway. It stops working correctly, and you end up having to reinstall the drivers if you unplug the unit. Every time.

  The closest I can understand, I need Windows 7 support for all the things Intel 82801DB/DBM on my computer. The Intel site is too vague in it's style of support for downloads. I couldn't tell what to download, or even if I had the right to download.

  As for the thing of volume of service - I am used to use it in Windows XP. I would of course only it in Win7.

  If anyone has any suggestions as to what to try next, I would be grateful.

  Thanks for the replies. I went on the Intel site.

  I downloaded the chipset from the Intel site identification software. I discovered that I have a 855 Chipset of the PM. Then, I got on a chat session with the Intel Support cat.

  The short of it is that there is no way to upgrade to this chipset regarding Windows 7 for Intel.

  The transcript of the conversation:

  Intel: Hello. Please use the Customer Support chat service. We are pleased to be of service. How can I help you today?
  you: I have a laptop CL51 compal, which uses the game of 855 PM chips, depending on the software of the identifier, I downloaded Intel. I need Windows 7 drivers, but they are not available for Win7 in the download area of support for this chipset. What can I do?
  Intel: I apologize, but there are no drivers available for this operating system or Microsoft * Windows * Vista *.
  you: when will they be available?
  Intel: My apologies, but this controller has reached its end of life there will be no new updates for new operating systems software
  you: I now have windows 7 running on the computer. It seems to work fine, except that one of the device drivers come with the yellow triangle. I can do everything I have to except the function keys are not express of adjusting the volume (volume up and down with function keys). How crucial the chipset is correct for a functional system?
  Intel: This new operating system must have all the required software for this chipset work, so it should be good, but with limited capacities
  you: Control Panel-> Device Manager-> other devices-> unknown device-> properties-> "the drivers for this device are not installed. (Code 28) There is no driver selected for the item or a set of device information. To find a driver for this device, click Update driver. »
  Intel: excuse me, but we would not know what device means the Device Manager, this chipset was not intended, and it is not tested for Microsoft * Windows * 7, at this point, you can use this operating system at your own discretion
  you: Yes, I thought. However, when I go to the dashboard-> devices and printers-> laptop-> Trouble Shoot it seems to think it is called Smart@IO. Is something Intel?
  Intel: He doesn't seem to be a controller of us
  Intel: You may need to verify with the laptop manufacturer to see which devices are installed on this system
  you: under control panel-> Device Manager-> other devices-> unknown device-> properties-> general it is said "location: on Intel (r)" 82801DBM LPC Interface Controller - 24CC "»
  you: this seems Intellish.
  Intel: This is part of the chipset controller, but as mentioned, there is no software for this controller that run on Microsoft * Windows * 7 and this operating system must have the software required to make this mature product to work
  you: so the problem of chipset is not relevant?
  Intel: It seems to be, please keep in mind that you are using a non validated platform
  you: it's the fact that I can't use function keys to change the volume of the sound related to the chipset?
  Intel: Is not part of the chipset
  you: so another driver is required for the volume function keys work correctly, no Intel...
  Intel: OK, most of these devices is third-party components
  you: OK, so if I don't use the chipset, what exactly he controls?
  Intel: He will take care of i/o control for USB devices
  you: Okay, that might be the reason why I can't get some USB HID devices to work. Anything with compatibility Win7 looks good, however.
  you: I tried a TrendNet TVP - SP2 ClearLink Skype speaker. It works fine on other systems. Just not this one because of the thing at the end of life on end of Intel. It is likely that if they have a Win7 compatible driver I could operate or I'm stuck here?
  you: it works still fine on new lenovo to my wife with Vista.
  Intel: You may need to verify this issue directly with the manufacturer of your system with TrendNet
  you: my system manufacturer is probably going to tell me that it is an end of life issue - referring me you Intel - but I bet you knew that already huh? . I'll check with TrendNet to see if they can build a new driver for Win7. Thank you. This clears up a lot of things. Hard drives seem to work well. Other USB devices work as well, especially if they are sized to work with Win 7. Once again thank you. Happy new year.
  Intel: You're welcome.

• Average recovery creating Impossible on my Satellite L755D

  Hello

  Try to create recovery disks for my Satellite L755D-10U through toshiba bulletin board, but whenever I click on the icon to create a recovery media, I get an alert that says:

  the creation of means of recovery is impossible!

  Not found the HDD Recovery folder on the second disc of the first hard drive. There is no valid Envirenment recovery of HARD drive on this computer.

  My best friend has exactly the same laptop that I bought at the same time (sad, I know) but its made fine records. I don't do anything else, can anyone help me, does anyone know why mine does this?

  Thanks in advance

  Still is it that creation of recovery utility Toshiba doesn't have access to the recovery image stored on the HARD disk.
  Unfortunately, nobody here can tell why.

  I put t know what did you do with your laptop, but I presume that you have changed the structure of the partitions or perhaps somehow remove HARD drive recovery image.

  If your friend has absolutely the same notebook (the same part number (PSK4YE) that it can create this disc of recovery for you and you can use it on your laptop. If this isn't the case, you have a problem.

  Please send comments.

• Satellite L500-(128) & start a Linux Live USB Stick

  Hello

  Can someone tell me if it is possible to boot from a USB stick (for example with Xubuntu 9.10 on it) on a new Satellite L500 (-128)?

  She has the necessary options USB - HDD it in the BIOS for this?

  The owners of any Satellite L500 there able to give accurate information? would be appreciated. I could do with the knowledge before you buy one.

  Thank you very much.

  Yes, the L500 can boot from USB Flash Drives. I believe that all 2008-2009 Toshiba laptops can boot from USB :)

• Satellite L755D PSK36E - need drivers Windows 7

  Hello

  I have the laptop to my girlfriend and she asks me to install windows 7 (64 bit) for her.
  I did it with a Dvd I had of my own Pc.

  But now I have a problem.
  On the new laptop to be installed are not all drivers I think.
  The wifi does not work, and the office are also very mutch pixeled I guess.

  Can someone give me somethink like a pack of drivers I need?

  Its a Satellite L755D PSK36E

  I hope for more help...

  / Pascal

  Hello

  You will get all the drivers here:
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp

  There you can select the Satellite L755D PSK36E-> Win7 64 bit

• Where can I download drivers for Satellite A210-128 XP

  I A210-128 and want top WinXP. Where can I get/download the XP drivers for my laptop?

  Hello

  Satellite A210-128 seems to be new to the market...
  It looks like the Toshiba page pilot European provides the drivers for Vista at the moment.
  I think you should wait a little bit and I'm sure that XP drivers will be available in the near future.

  Of course, you can try to install drivers XP chip manufacturing site.
  If you need graphics drivers I recommend visit www.laptopvideo2go.com or www.omegadrivers.net.

  concerning

• HP 15.6 black liquor "-r131wm: im having truble with my usb drivers"

  Im having some trouble with my USB ports both 3.0 and the other usb port two 2.0 do not respond they give a signal of power because they can charge my phone but the OS which I down graded to win. 7 NPT back usb ports that I watched usb drivers and he scored as drivers uninstalled, I ran windows update but that was no good please help I need to get the work done but with output usb port no need im thak you in advance

  Hello:

  Use the W7 x 64 drivers for the HP 250 G2 except the BIOS and firmware files.

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5449369&swLangOid=8&swEnvOid=4059

• How to reinstall the usb drivers?

  Original title: usb driver problem

  I tried to reinstall my windows xp computer usb drivers. I uninstalled root hubs and restarted the computer. Now, I can't use my mouse or keyboard. Can I do something to reset the computer without using my keyboard?

  Hi Usbloser,

  I suggest you to follow the steps in the article in the Microsoft Knowledge Base and check if it helps.

  How do I recover from a corrupted registry that prevents Windows XP startup

  http://support.Microsoft.com/kb/307545

  I hope this helps.

• Reinstall the USB drivers for laptop G62-367DX operating system windows 7?

  Hello!! I recently got a HP G62-367DX laptop about a month and half ago and a mouse without a wire about two weeks later. The mouse no longer works last week and tried to put his receiver in other ports usb with no luck there. I also tried to do a system restore and uninstall usb drivers and then by using the device driver to find the hardware changes defective. The only thing I got was an error indicating that the software device driver has not been installed successfully. Is it possible to manually install the drivers I need, or is it a problem of operating system that may require a reinstall of my OS? I would greatly appreciate any comments. Thank you.

  You will need to reinstall the original chipset drivers.

  Go to the Start Menu -> click on all programs ->, click on manage recoveryr (open Recovery Manager).

  From there, under "I need help immediately" you can select "Hardware Driver réinstallation"-> click Next.  When you see the list of available selection drivers "ATi (or AMD) Driver VGA" and click Next.  Once it's done, click on finish, then will restart your computer and you can test your system/USB devices to verify that it is fixed.

  If it does not, meet with your specific model number or PN (product number).

• Getting the package USB without having to reinstall the Application

  Hello.

  Let's say that one captured an installation of an application and only the Thinapp option. Later we realized that the USB option is more useful. Is it possible to get the USB package without having to reinstall the application and the caturing for USB?

  Best regards

  Yes, just add

  SandboxPath =.

  to the \[BuildOptions\] Package.ini article, then run build.bat again