Satellite L755D - Web cam/mic are not detected by Skype

Similar Questions

• Satellite L500 - Web Cam does not work

  Hello.

  My book built into the camera, and that camera thos not inicialize,

  I have ave made a HARD drive recovery, and after the web camera software was not installed. I downloaded this software one of the device drivers and it instaled in the laptop, but the camera, but the camera does not work.

  Is there a way to fix it?

  Thank you.

  The question is: is cam material recognized and detected by the system or not?
  You can see in the Device Manager?

• Satellite A300D - FN keys and fan not detected

  Hello

  Crashed my HDD (winlogon, MBR, boot,... deleted. Just a disaster), so I have to format the drive and make new instalation of Windows. And it happened Toshiba utility installation. And I can not find the drivers for the FN key. I googled to be called "Utility Flash Cards", but only what I founded is pdf of it. And also my Everest or Notebook hardware control is none of my fans.

  So I ask, where can I find it? Or better... is a place of grand ' ol pack after the new installation of the operating system? Why my fans are not detected by the system? Maybe I just forgot to install a driver. It is quite possible. So, where is a problem?
  And... I'm just curious, y at - there a programe, utillity... etc. which can control the fans?

  I have the Satellite A300D, Windows Vista 32-bit

  Thank you very much!

  Hello

  Can on mate, you can find all the drivers and utilities on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  You must install Toshiba Value added Package. That's all that you need for the FN keys. ;)

  But I m wondering about your question about the fan. Why do you think the fan isn't recognized? Everything about the fan will be controlled automatically. You can change only the method of cooling between performance and battery optimized in Windows power management.

• movie maker error: a video capture devices are not detected

  Filmmaker gives the following statement. A video capture devices are not detected. My camera is plugged in and turned on. This has not happened before.

  What is it?

  How is it connected?

  Filmmaker works with mini camcorders dv connected FireWire, the firewire driver is installed by microsoft, you should not need to reinstall it, apart from a few special cases.

  This device and cable worked before?

  If so, what was the alst time and have you made any changes to the computer since then?

• Bluetooth AC411 speakers are not detected by my computer

  I'm trying to pair my Bluetooth with my pc speakers, but they are not detected. My cell phone is detected. Help!

  Thank you very much for this tip, Nicholas,.

  I tried for a long time and it worked only when I pressed the button.

  I don't understand why this is not mentioned in the Quick Start Guide.

  Best regards

  Cyro

• Peripheral hardware devices - don't work or are not detected in Windows.

  Hardware devices do not work or are not detected in Windows.

  I have exactly the same problem. Is the returned message the Microsoft FixIt. No further details given. Nothing seems to be more information on the problem other than the claim that we exist.

• Some files in my USB SanDisk 16 GB USB key are not detected and when I connect to another PC, all files are detected

  Original title: some files in my USB are not detected and the rest of the files show find when I connect to my pc, when I connect to another pc the files seems to find.

  Hello world

  I have a SanDisk USB 16 G with important files, when I connect to my pc windows 7, some files are discovered, I am able to read other files show as empty files and my pc don't its not able to open them.

  When I connect the same USB for my lap top with windows 8 all the files where to find and I can open with a problem.

  Can some body please help me solve this problem?

  Hi Martin,

  This problem can be caused if the program for the particular file could not be installed on your computer.

  1. What is the file format or the extension of the files that you do not read or recognize in Windows 7?

  2. what exactly happens when you try to open empty files?

  3. have you made any recent hardware or exchange of software on your computer before the show?

  You need to check the files that are not open in Windows 7 and trying to install the software for files that are not opening and control.

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• When I go to add web fonts fonts are not found? How can I change this?

  When I go to add web fonts fonts are not found? How can I change this? When I go to add web fonts fonts are not found? How can I change this?

  fixed after restarting!

• New SATA HDD are not detected on PowerEdge R710

  Hi guys,.

  I have a PowerEdge R710 with the reference number below

  Service number: ADMIN NOTE: maintain the label removed by privacy policy > | Express service code:

  ADMIN NOTE: kidnapped by the Express service code privacy policy >

  I have 2 x 750 GB SATA HDD that are not detected at boot of the server. Obviously, the installation of Windows Server 2012 is not possible because it does not find any drive installed in the system

  Please help as I am new to the hardware configuration.

  Thank you in advance.

  You must configure RAID first. If you use the RAID S100 controller on board, it is not compatible with 2012.

• Satellite L650 (PSK1JA-07C017) - Web cam application does not work

  I have a client who owns the computer above and while I was there yesterday, she mentioned that the web cam is not working. I clicked on the icon and received a popup saying to upgrade or complete installation and after doing this the application still not open. I went to the support downloads section and got the enumerated here uninstalled web cam application the application of the computer.

  I re-installed with the application that I had downloaded ut that did not help. The same behavior was exposed. I googled a little and I saw many enties from others so I came here to have this problem, but no solutions.
  Any help would be appreciated.

  Sq

  > A full installation of operating system due to a failure of the application and judging by the results of google search a known issue that should have a fix now.

  This could be a software problem I mean it is possible that the system could be confused to you that it is not impossible? In my short life, I noticed several times this dirty registry may cause issues such as

  > I have installed with the application that I had downloaded ut that didn't help
  Well, maybe you should try to clean the registry using some tools such as CCleaner for example before you install the driver if this is not enough, then I would try to reinstall the image of Toshiba

• Web proxy settings are not configured correctly. Have problems with games and other applications.

  original title: apps do not correctly configured

  The default Outlook Express mail, The default Outlook in the Express News with the Internet Explorer Web Proxy are not configured correctly. Because I had problems with the game apps and stuff in my email address.

  Hello

  · You receive an error message or error code?

  You can access the links below:

  How Set Up Outlook Express - and http://support.microsoft.com/kb/2409264

  To configure the web proxy:

  HOW to: Configure Internet Explorer 6.0 as a Web Proxy Client in Windows 2000

  http://support.Microsoft.com/kb/310296

• Since the L7680 installation my usb ports are not detected...

  It seems that something in the registry has been changed.  My Western Digital Passport (mass storage device) is not detected is not my SanDisk Micro (2G).  Western Digital will work in the USB from the printer, but don't the SanDisk.  I've lost the use of all of my USB ports on my computer processor and montor.  They used to work before installation.  I uninstalled and reinstalled, I check startup items in MSCONFIG.

  I read on the Microsoft support page which the hkey_local_machine\system\currentControlSet\Control...

  should be set to activate, but I do not have this folder in XP.

  Western Digital does not know what is happening, or not SanDisk.  HP really gave me the run around way to uninstall and reinstall, but I didn't get an answer that solves the problem.

  It seems to me that since it was drivers from HP which caused my other unit to pass unnoticed, HP should be able to tell me how to solve this problem.  I do too much research for a new product.  I know I'm very frustrated, and since this is a new printer I still have time to take it for something that's going to work.  I had a Dell that has worked well, I wanted to just an upgrade.  I guess I could have updated by Dell.

  Just about the evacuation, someone has an idea what the fix is for my USB not detected ports that have been replaced by the reader on this printer?

  I added a new HP printer to my set all my ports no longer works. None of my flash drives or removable hard disks worked. I tried everything and then read "ports must be updated". My computer is older than three years and the ports of origin are 1.1 and are of most new USB 2.0 devices. Long story short, I went to microcenter and bought new ports ($11.00) and add them to my computer. All ports are now functional.

• my web cam works do not need help please

  When I bought my laptop that my webcam was working and now it not, what should I do?

  Hello

  You will probably need to reload the drivers of the device and any camera control software.

  Login as an administrator.

  Control Panel - Device Manager - Imaging - write down of the brand and the model of camera-
  Double click on it and on the tab of the driver version. Now, click on update of drivers (which may
  do nothing as MS is far behind the drivers of certification). The RIGHT CLICK on the camera
  -UNINSTALL - REBOOT - it will refresh the driver stack.

  Now, go to the system manufacturer's website and download the latest driver of the camera and other partners
  the camera software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each
  pilot.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Then let windows updates on however prevent loading of drivers that are often
  older than those that you have installed. If updates suggests a pilot then hide it and
  glance manually to see if their really is a more recent version (at the time of system and peripheral manufacturer
  the manufacturer sites).

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Network drivers are not detected after a clean install of Windows 7

  Original title: reinstall Windows 7 ultimate

  Hi I have just reinstalled windows 7 ultimate 32 bit on my laptop and does not detect the driver from the internet. How can I fix it...?

  Hi Mosochapis,

  To provide the proper resolution, I would need more information on your side.

  1. What is the number of brand and model of the laptop?

  2 do you have wireless or wired Internet connection?

  I suggest to install more recent network driver on the manufacturer's Web site and check if it helps.

  Check out the link:

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Check out the link for more information.

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Internet connection are not detected

  Hi, I switch from win xp to 7. After the installation of acrobat 8 made, I had the problem during the activation. Can't activate error msg "INTERNET CONNECTION NOT DETECTED". Please help solve. Thank you.

  If you use the 32-bit version, you can be in the best chance. It seems like a lot to win 8 is similar to Win 7 (I know it's probably debatable) and several people reported to work on Win 7. If you haven't tried with the record as an administrator and by disabling antivirus during installation, you may be successful. However, you have apparently installed. There may be some changes to the operation of the internet on 8 to win and who will be, but this isn't something I'm good. If you are not in a hurry and stop regularly, maybe some people will be accompanied by suggestions.

  AA7 and before, the main problem with Win 7 was the failure of AcroTray. I hope some people will be here soon.