Satellite L770D - 10 M: Linux installation cut off my warranty?

Hello
I bought a Satellite L770D - 10M and I have "a user of linux opensuse
Can I reformat the hard disk in order to install opensuse without losing the warranty?
Thank you

Of course you can do it. You can do with your computer laptop all you want.
Before installing Linux create recovery disk. One day if you want to still have factory settings use this disk for the installation of Windows operating system.

If you install Linux without create recovery DVDs, you can do this but follow Toshiba recommendation on the creation of recovery DVDs.

Tags: Toshiba

Similar Questions

  • Satellite Pro A60 cuts off after 3 minutes

    Hello

    work in IT Support generates many puzzles, but I currently have a Satellite Pro A60 which cuts off after 3 minutes.
    I have deleted the main CPU fan and have noticed that the VGA Chip Set fan fails.

    It is not at all which makes me think that it is completely broken or there is a problem with the motherboard.
    Who is more likely and if not card mother, can I buy a VGA heatsink thermal elemnet / separate fan and if so what is the part number and ball park cost?

    Matthew

    Hello

    As you already suggested this strange faucet portable bottom may be related to high temperature and to overheating.
    You are right; the malfunction of the fan could be a reason to close automatically and sometimes down.

    > can I buy a VGA heatsink thermal elemnet / separate fan

    Usually, the cooling modules are pieces separately and can be replaced.
    But notebooks disassemble and replacement of cooling modules is not easy and a little more difficult for someone who has no experience and never changed something like that. It s just too risky, because this person may damage the motherboard very easily.

    So, it's probably best to contact the technician of specifications for these s replacements!
    The ASP can command the support of the head of Toshiba warehouse cooling modules and compatible and could replace it.

    Best wishes & congratulations buddy ;)

  • Satellite Pro A100 PSAACE just cut off completely

    Everything was in working order last night. Today when I tried to use my laptop in the University, after awhile the laptop just cut off completely (not 'window stops', literally just cut off). At this point I noticed was the charge indicator not illuminated.

    So I checked that it was in the form correctly and everything was connected, who he was, but still no joy. I think it is maybe that my charger is dead on me.
    But I'm not positive, as when I remove the battery and reinsert it, the "power connection" comes on, even if the charge light.
    I could put my laptop then reinsert the battery, but it would be cut at random (probably because she have relatively no power left in it).

    Does anyone know if that means anything?
    When it is on, but not connected to a power supply when you move the battery icon... He thought it was still connected to a power source (if I had the power cord in or out of the laptop).

    Sorry if this seems obvious to some, just I would prefer not to buy a new charger to see that there is a problem with the socket on the back of my laptop, or a problem with the laptop battery etc. If you unplug your laptop, then remove and reinsert the battery, it lights the led "connection voltage?

    Hope to hear some reviews soon, that could help me cope with my laptop troubles.

    Thanks for reading,

    Dan

    Hello

    Simply put your laptop turns off automatically. Is this good?

    Well, for me it sounds a little like the laptop stopped automatically to prevent material damage due to a temperature high.
    Perhaps this was caused due to overheating.

    This can occurs if the modules of cooling don t work properly and can not cool with a maximum return. Generally, this is related to dust and debris blocking the cooling fans.

    This happened to me too many times there... I cleaned the cooling fan using a jet of compressed air and it helped.

    Maybe you should check this too...

    Welcome them

  • Cursor images are cut off 20%-80% of the height, has been very good in 34

    On our Web site, we have a slider with about 10 images that have always worked. Now, users who have installed the update of Firefox to 35.01 cannot see the full images. Instead, some images are cut off 20%-80% of the way down on the cursor, while others are intact and completely visible. Image size/type has no effect.

    Everyone knows this?

    Clear the cache and delete cookies only from Web sites that cause problems.

    "Clear the Cache":

    • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

    'Delete Cookies' sites causing problems:

    • Firefox/tools > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

    • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
    • Do NOT click on the reset button on the startup window Mode safe

    You can try to disable hardware acceleration in Firefox.

    • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

    You will need to close and restart Firefox after enabling/disabling this setting.

  • How can I place the bookmarks from a Linux installation on partition commune/home for various Linux distributions on separate partitions for access?

    17 Firefox under Linux with Linux installations on separate partitions, with a repertoire common/home its "own partition.

    I would like the json files to appear only on the / Home partition and each instance of Firefox to read and write files json here only

    Hello

    One way would be to start the Firefox Profile Manager in each Linux instance and that it points to a profile of another Firefox installation folder, preferably one that has been customized in a satisfactory manner. You can then delete the profile by default in every Linux installation.

    Profiles Howto

    Profiles of school boards

    Files & profile folder

  • Satellite L770D - 10 d - the processor upgrade

    I have SATELLITE L770D - 10 d with AMD A4 - 3300M and I would like to upgrade the processor to for example A8 - 3500M, since they have the same socket and TDP. I have the Toshiba support pages, but I couldn't find an answer.

    This is because toshiba usually does not support updates to their laptops and if they do its own risk

    the only way to know if it works is to screw open the laptop and see if the cpu is not soldered to the motherboard
    If that's your out of luck and the custom then able to switch on the cpu

    If not then u check if the motherboard support is the same as the new A8 - 3500 m

    If it's the same thing then u go to the step following and demand for the bios - mods.com if your BIOS has the required firmware for this cpu

    then IF that is okey then you will be able to replace the cpu

    remind u this will require you to disassemble almost all computer laptop and high risk damage to your product if it is not done right
    so, if you don't have any COMPUTER knowledge id suggest u not not for this

    This time did so with L500-1ZP, which came with an i3 330 m and upgraded to an i7 620 m still solid

  • Satellite C850-A958 - BT Stack installation stucks & utilities BT are not available

    Model: * Toshiba Satellite C850-A958 *.
    Purchase date: January 13, 2013
    Warranty status: still under warranty until January 13, 2014

    * Issue 1: * "Bluetooth Stack" utility is blocking and not to complete the installation procedure.

    * Problem 2: * there is no utility 'Bluetooth' work due to the installation of stuck.
    Operating system: Windows 7 64-bit

    Address the situation/address Description
    My laptop SSD (Solid State Disk) had a manufacturing defect represents in the form of bad sectors & because of the guarantee, he was in a process of change for the defective part by the center of service allowed in my country.

    When she came back to me, I started to install the operating system and drivers (my computer portable edition does not include operating system drivers).

    I faced a serious problem and it was not existing before, when installing "Toshiba Bluetooth Stack for Windows" the installation process is not completed successfully and it's freezes to an important point.

    This process blocked the program of "Bluetooth Stack" menu is already created and if I try to run any utility of it I get an error message saying: + "the program can't start because TosBtAPI.dll is missing on your computer. Try reinstalling the program to fix this problem. » +

    Installation stucked treat freezes - for more than two hours in fact - and the only solution cancels the right low "Setup Bluetooth Drive_r" installation process by pressing "Cancel".

    After windows restarts, I found the menu of the program seems like a properly installed (complete the menu & highlight of the elements on the inside), but if I run one of the utilities include a message required to reinstall the Bluetooth driver and when to start it stops at the same point of freezing again as endless and repeated behavior.

    I tried to install a new copy of Windows several times - also re - download the source file for the Web from Toshiba site several times with the same result every time.

    Currently, I can't use any uility driver bluetooth more!

    I want to know:

    What is the solution to this situation?
    Is it possible that the bluetooth hardware is damaged during the process of evolution of the SDA in the service center?

    Thank you

    Hello

    I think I know what you did wrong the laptop supports the Realtek Wlan / BT combo card.

    This means that a single module shares the feature WLan and BT.
    To ensure that the two would work correctly, a [Bluetooth Filter Driver Package | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 312 & selProduct = 7499 selSh 3439 = ortMod & language = 13 & selOS = 30 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 1 & ID = 81895 & OSI D = 30 & driverLanguage = 42] must be installed.
    After that, you could install the battery Toshiba BT.

    Next to the installation of this software, you must also install VAP (value added package) which is an essential part in the Windows 7 environment.

    Once again:
    First install: VAP
    Then Realtek Wlan driver, after this suite Bluetooth Filter Driver Package by Toshiba BT stack

  • Tecra S3 RAID-0, the Linux installer does not recognize the hard drive

    Hello

    I've been googleling much and the only one I found is a post on this forum: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=8758

    I have the same problem, the RAID controller is not recognized by one of the distributions of linux in circulation, and so the hard drive is not recognized, so the linux installation is not possible. I tried FC7 and SUSE9. Due to the demands of work, I need to install FC7.

    If there is no driver available for linux, it is possible to disable the RAID controller on the laptop? If so, is that someone could put a guide of how do, or send me to a good link on the subject?

    Thank you
    Alex

    You will be very happy if someone with S3 and Linux will write here. Until you wait for the check you must fill the pages of Linux support:
    http://Linux.Toshiba-DME.co.jp/Linux/index.htm
    http://newsletter.toshiba-tro.de/main/index.html

    Maybe you will find some info here.

    Bye and good luck!

  • Linux installation - I can not find the installation script

    I'm trying to follow the LabVIEW for Linux installation guide, but I have a problem. This post will be long, as I will try to tell you what I've done so far. I am also kind again on Linux, so I don't know there are a lot of things I don't know.

    I try to use http://www.ni.com/pdf/manuals/374718a.html#installing

    and http://www.ni.com/pdf/manuals/375845d.pdf

    First step of the guide is to insert the installation media "' and run

    # sh. / INSTALL

    and it's pretty easy. Or at least it would be if I had no idea where that sh file is. I requested a copy of the installation discs for my University (I install on one of their computers), and they said that while they do not have any what Linux install disks, they were pretty sure "it's here somewhere," whatever that means. This seems to be the extent of their knowledge about linux.

    On this disc is a folder named slcp10 with the content slcp10.cab, slcp10.mis, and slcp200_mft.cab, which are all of the files of windows and as far as I can tell cannot be run under linux, unless I'm using WINE, which is clearly not the way to go.

    I have also some ISOs from the Department of licensing website, but also, no one seems to know anything about installing Linux. After you mount the ISOs, I see that they contain records Bin, Common, Distributions, licenses and Readme (which is full of all kinds of trivial things). They also contain the files academicsitelicense.html, asladminresource.html, autorun.exe, autorun.inf, nisuite.xml, patents.txt, readme_core.html, setup.ede and suite_md5_1.xml, which none do look promising. Again, I know only how to install .exe files using WINE.

    I have since then turned to the internet to try and download directly from OR and went to http://www.ni.com/download-labview/ and selected ' already own LabVIEW? Download the latest version. From there on, I select the drop-down list for alternative OS and select MAC OS x I read somewhere on the help pages OR that it would work on a linux machine (which seems logical, that the MAC is UNIX-based, right?). Well, it gives me a file dmg (apparently some sort of file mac?) I found a way to use Linux by extracting in 7zip and then ride the hfs file. It always seems to be some sort of evaluation program because it contains LabVIEW2014Evaluation.pkg, readme.html (which takes me to the installation of OSX readme-useless), installation_guide.pdf (again, only for MAC and useless for me), drivers.webloc and Extras files and licenses.

    I'm at the end of the roll, man. I feel that I'm taking crazy pills. I've never had so many badly installed a program before in my life, because technically I haven't yet started the process of installing again, and I'm already about to defenestrate from my computer. Please help me. I don't know what else to do, and I don't know there is a very simple solution that I am too ignorant to see.

    Our lab run us windows, and cake installation. After learning Linux over the last months, I never thought I would say this, but in fact, I would like to have a machine windows right now.

    Well, I managed to get installed it, but only because I found another ISO of site licensing department which had linux install files. Curiously, this unique ISO is a bit 3 GB while there are three other ISOs each come at least 7.5 GB. Are there really that many missing packages on Linux?

    Sorry if someone reads this has similar problems, but the best I can do is tell find Linux installation disc.

  • Cut-off for the 6008 analog input voltage

    I am using the analog inputs NI USB-6008.  The specification says they have a 144 k ohms input impedance.  But it does not say what is the cut-off voltage.  If you leave a disconnected and measure the voltage you will get 1.4 volts.  So I guess it's the cut-off voltage, but it is not spec'd.

    Someone agree that these Amnesty International isn't terminatied by 144 k - ohms to 1.4V?  Is this in the documentation somewhere?

    Figure 7 on page 16 of the NI USB-6008/6009 User Guide and specifications shows the strange input of this unit circuit.

    Lynn

  • laptop keeps cutting off after 1 hour. new battery installed

    laptop keeps cutting off after 1 hour.  new battery installed why this phenomenon occur?

    Have you checked your Power Options settings?

    The following article is maybe worth a visit:

    Adjust Windows XP Power Options
    http://www.lancelhoff.com/adjust-Windows-XP-power-options/

    A Google search for power management / Power Options
    will provide more information.

  • Windows Media Player play about half of the clip, then the picture cuts off, the screen goes black, but audio continues to play.

    Windows Media Player play about half of the clip, then the picture cuts off, the screen goes black, but audio continues to play.  Just reinstalled MP 11, same problem.

    Hello

    · What is the number and the model of the computer?

    · This occurs when you are working on any specific file format?

    · Were there any changes made on the computer?

    · You play the file in mode full screen?

    Change hardware acceleration

    a. you can try to change the hardware acceleration in the middle and check (you can try another level too.)

    b. right-click on a space empty on the desktop.

    c. go to the resolution of the screen.

    d. click Advanced settings, and then click the "troubleshooting."

    e. set hardware acceleration in the middle. (Here you'll get the only option your video card sound support).

    You can also check: you receive an error message of codec or audio plays video but does not play when you play media files in Windows Media Player 11: http://support.microsoft.com/kb/926373

  • HP Deskjet Ink Advantage 4515: Photo cut off when printing, but only on glossy paper!

    Hello.

    Im trying to print 10 x 15 normal image.

    Whenever I try to print, that he cut and every time that different! That's what I did.

    1.) tried to connect the printer via the USB port. Did not work.

    2.) tried different programs to print. Did not work.

    3.) exchanged new original ink. Did not work.

    4.) tried different paper glossy. Did not work.

    5.) tried to use Scan Doktor.Didn't work.

    The only solution that worked was that I tried to print on paper 10 x 15 non-glossy while the image does not get cut off.

    As you the cann see the picture at the top is printed on the other side of glossy paper (not glossy side) and it worked fine. Just the quality is terrible.

    All the solutions for this? It would be great...

    Thank you

    Greetings

    In the paper here troubleshooting steps can help solve the glossy feeds does not correctly.  I would say that the cleaning rollers as shown in the solution of two.

  • Computer runs slowly, and cut off when I watch or listen to the music or video

    My computer is HP Windows Vista - office computer.  My computer runs slowly, and cut off when I watch or listen to any video or music.  I tried restore, to restore all the drivers for the original version (but did not offer the video card) and all I could think to do.  My computer will not be completely updated anything - I think that my video card is bad.  What can I do?  inexpensive if possible preference.  Thank you!

    Hello Deedahday,

    Thanks for posting on the Community Forums of Microsoft Vista.

    This problem may occur because of many factors. Follow the steps below; It could help us solve the problem.

    Access the link below and follow the steps to optimize Windows Vista for better performance.
    http://windowshelp.Microsoft.com/Windows/en-us/help/83EC0FFE-EE04-4D53-8B87-25D1F05C954E1033.mspx

    Try to update display drivers:
    Try to access the computer manufacturer's website and select the model of your computer and download the latest drivers to screen for your computer and install the same.
    Access the link to download the drivers from the manufacturer of the computer: http://www.hp.com/#Support

    Also set the virtual memory of the system managed size:
    a. click the Start button and access control panel
    b. click on system and Maintenance
    c. click System.
    d. in the left pane, click Advanced system settings. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    e. on the Advanced tab, under performance, click settings.
    f. click on the Advanced tab, and then under virtual memory, click on change.
    g. Select 'Size of system managed' and click on Set.
    h. click on apply and Ok.

    Restart the computer and check if it works very well.

    It will be useful.

    Thank you and best regards,

    Srinivas
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • electricity cut off while I spend to lollipop

    Hello!!

    I have D6503 Z2 and did not start or activate normally after electricity cut off while I spend at lollipop... What can I do?

    P.S my warranty is almost out because I bought in Dubai and now live in Egypt and I turn to local care of Xperia in my city, but they ask you to pay $40

    You may need to perform a repair of software using PC Companion. The process will erase all internal memory. You might need to charge your device for about 1 to 2 hours until the device has so at least 60% battery.

    Make sure that the device is not connected to the computer or laptop and turned off (sometimes you have to press the power button / stop and volume until what the machine vibrates 3 times or on some devices, it must push the small button near the tray on the back of the camera or SIM).

    Open PC companion-> support area-> update phone software / Tablet-> repair my phone/Tablet blue highlighted. Follow the steps, do not plug your phone until you are prompted to press volume down while plugging in the USB cable. If PC companion does not start the repair process, you may need to run Windows 7 compatibility mode (in some cases XP).

Maybe you are looking for

  • Can I set Firefox as my windows 7 default email client?

    I already have Firefox program etc. email mailto/send to Gmail, but I also want to put the Windows 7 default email client to use FireFox (who knows how to use gmail). For example, when in Windows Photo Viewer, I click on "send" and then "join" I get

  • DeskJet 1510: Scanning as Word doc

    To scan a document and then save it to work on it

  • Generation of reports 8.6 LB

    When I place the new report VI on a new VI, the error list displays a compilation error in the standard State: set VI police report I use the html report for my application, but I would like that peace of mind as to why this compilation error

  • Pavilion 17-g121wm: laptop refurbished with no Windows license key

    Greetings, I just got a used Pavilion laptop. It came with 10 windows pre-loaded and is in perfect working condition, but they stripped all the stickers from him, including one with the Windows license key. If I buy the HP recovery media, it will hav

  • Windows Mail Security Popup

    Suddenly, I get a Windows Security popup asking username and password everytime I try to send or receive e-mail in Windows Mail.  This information is in the account profile, the block remember password is checked, and there has never been a problem b