Satellite L775 - mouse pad does not work properly

Similar Questions

• Qosmio X 870 - mouse pad does not work properly

  Hello

  My mouse pad is facing upward and I don't know why. It works when I restart the laptop, then after a few minutes, it does not at all. I checked the properties in Device Manager and it says it works properly... which is not the case. I uninstalled the driver and reinstalled. He always does.

  Not sure if this is related to some of my key of F does not not to my other thread - https://forum.toshiba.eu/showthread...ns-not-working

  A question I've had for a while (which may or may not be related) is my TOSHIBA x 64 compatible ACPI logical value and general-purpose device has a problem. On the device manager says "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) ». I uninstalled and reinstalled this with driver Toshiba utility pack and it always happens with this error. I cleaned the registry several times using tuneup utilities 2013. It is probably not bound as it has been like this for a long time with no obvious side effects. But it's annoying nevertheless.

  Maybe windows 10 could save the day (I'm on the 8.1). I hope. In the meantime if anyone has any suggestions I would be very happy.

  Good, someone else who might find this is useful - it turns out that it was a hardware failure. My laptop hinge was loose, and therefore the case had to be replaced. He also replaced the mouse pad - now it works fine.

• Mouse pad does not work properly

  I bought my laptop toshiba 2 moths ago, but yesterday, my mouse pad no longer works correctly.

  I can still use it to move the arrow on the screen but cannot use it to doubleclick on something else.
  I need to use it in conjunction with my left hand button which is very frustrating.

  I was wondering if anyone had any ideas how to solve this problem, thanks

  On this virtual path, it is not easy to understand what is the problem there. It is not easy to tell if problem described is related to the touchpad software.

  Try to do system restore and roll back the OS a few days back and check if the same problem persists.

  By the way: which laptop model you have and what operating system are you using?

• Satellite NB10T-A-101 - mouse pad does not work

  I have a touch screen for Toshiba Satellite NB10T-A-101, the touch screen works very well but I use mostly the mouse pad I find using the slider easier.

  But recently my guarded cursor freezing for a second or two and then to spend once again, but now the mouse pad seems not working with the left and right click buttons work but not the touchpad.

  I made sure the touchpad is enabled in the mouse settings, so I don't really know what to do now.
  Any suggestions would be greatly appreciated
  Thank you

  Hello

  Have Hmm you also checked the FN + F5 key combination?
  This would enable and disable the touchpad as well.

  But from my point of view, it would be possible that the touchpad module is malfunctioning.
  I m thinking about the hardware malfunction because the touchpad buttons work and just touch the touch work area module doesn't correctly.

  Usually, if the touchpad would be handicapped by any software, both; as well as the touch buttons does not work.

• Satellite Pro M10 - infrared does not work properly

  Hello

  I have a Satellite Pro M10 and my infrared does not work. I downloaded the zip file with the drivers from this site. Then, I uninstalled and reinstalled, but it always happens in the Device Manager under "unknown - SMC IrCC - Fast Port infrared (IR Module: HP). (with an exclamation point). When I look at the properties it says under device status:

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Click Troubleshoot to start the troubleshooter for this device.

  However, under Driver Details is said:
  C:\windows\system32\DRIVERS\smcirda.sys

  I extracted the zip file in my home directory of c:\downloads\infrared.
  whatever I do, it does not now. It worked when I bought it, but I have too many things on the system for a new installation. Which brings me to another question. Is it possible to re - install windows without losing all your data, etc.? I did it with other systems (95,98) Windows. But it seems that the Toshiba recovery disc means any wiping.

  Thanks in advance for any help.
  Chris

  Hello

  If your HARD disk contains two partitions and you have saved the data on a second you can reinstall the operating system on the first partition using recovery DVDs.

• My built in mouse pad does not work

  My built in touch pad does not work.  How can I solve this problem?

  Hi LisaGreenberg,

  I'm sorry to hear that you're having trouble with the mouse pad.

  Before you start with the troubleshooting steps, I would like to ask you a few questions.

  (1) Windows operating system you are using?

  (2) what is the brand and model of the computer?

  (3) you receive any code or an error message when you try to use the mouse pad?

  (4) have you made no changes before the show?

  Please follow the link and check if that helps.

  Mouse, touchpad and keyboard under Windows problems: http://windows.microsoft.com/nl-BE/windows/help/mouse-touchpad-and-keyboard-problems-in-windows

  Please answer we help you solve the problem as soon as possible.

• Satellite C850 - internal MIC does not work properly

  my knees thoshiba (C850 - B237) internal microphone does not work properly. I checked my record with webcam... but can hear the noise only... in the settings of the sound card, everything is ok... I also did the uninstall device driver and restarted... But the problem is still... Help, please

  You must mark the internal mic as the default device.
  This can be done in its tab → click right on internal mic to record and choose the default device

• mouse pad does not work anymore

  Hello

  I had to take my laptop to Best Buy three times already in the last month because it stops just to work.  They insisted it was not a problem of HP or material and suggested that contact Microsoft because their suspicions, it's when a certain update comes through, it will start on the cushion.  Could this be true?  And, if so, why is that happening?  I don't know what specifically does update, nor do I have the time to find out.  In addition, I don't want to update the drivers EVERY TIME that happens to get my pad works again.  This is ridiculous.  I didn't buy this laptop with an eventuality I have to constantly update the drivers when Microsoft sends updates.

  Please notify.

  Thank you.

  TERI

  Hello

  You can contact HP directly, if it is still under warranty factory... usually 1 year... They may be able to help without worrying because you have a warranty extended through BestBuy.

  I have just returned your laptop to HP for touchpad\mousepad problems...

  My question is a little different in this mine worked, but did not work properly...

  When I tried to move the pointer, he'd try to scroll instead, or bring up the right-click menu.

  Sensitivity fluctuate wildly from extremely sensitive, to the point that tapping on it would not make a selection, and I have to use a button...

  Your most likely machine uses a Synaptics Touchpad. I tried all the drivers available. Some work better than others, but all have the same problem.

  A HP technician informed me that it was probably a defective touchpad, or possibly to the main Board of the laptop...  The touchpad feels a bit distorted, as it has a hump in the Center...

  It is with Windows 7 Pro SP1, not of Windows 8 and before Windows updates have been installed.

  It is possible that Win 8 is somehow causing the problem, but my guess is that it's a hardware problem like mine.

  For one thing... If the cushion sensor sends the wrong signal drivers not detect properly.

  Sometimes reinstalling drivers will fix it temporarily, but it will not happen...

  BTW... There is a setting that activates the light or not. Even if the light goes out it comes on briefly when you start the machine, and then after maybe 30 seconds it turns off... It is a function of energy saving do not use light.

  Try to uninstall the drivers and restart the computer... It will then use Microsoft drivers instead of the custom. None of the gestures will work, but the pointer and buttons should... just as a test.

  You can also consider getting a USB mouse, if it isn't to inconveinent. At least until you get a fix.

• Satellite C70D-B-300 does not work properly

  Hello
  Since I bought my laptop Satellite C70D-B-300 I have a few problems:
  (1) I can't turn off the laptop, (the screen turn off but laptop still running), similarly I can't close the session
  (2) start menu windows apps and sometimes that I can't open (if I click nothing happen)
  (3) 3/4 times a day, the laptop get in crash, I can't do nothing, I need to shut down with the power button (press for 10 seconds) even with ctrl + alt + delete does not work
  (4) new problems with 10 windows, I can not open a shop, sometimes cortana and star menu does not work so I need to restart... but I guess windows problem not Toshiba

  Thanks in advance

  There are too many problems.
  In my opinion, you must reinstall the original recovery image feature and test the laptop with 'presets' again.

  What is an option for you?

• Satellite L500D - integrated webcam does not work properly

  Hello world

  I have a L500D (I got it for about 2 months now) and yesterday I realized that my webcam did not work properly even if it worked just fine a couple of days.

  Here's the problem: when I turn it on (via Skype or through application of camera web toshiba), the colors are reversed: it's exactly like I had added an effect on the image as 'Posterize' or 'threshold '. Everything is bright, grainy, saturated...

  I tried in low light and high, and the night mode is not on.
  I couldn't solve the problem with the webcam settings, but regardless, I, can not do anywhere near a normal image.

  I spent a lot of time surfing the web but couldn't find a solution (or someone with a similar problem, in fact). I have windows 7 64 bit.

  Any help would be greatly appreciated. I run my laptop with a lot of care, which makes even more beat when something goes wrong... Thanks in advance!

  Jminiz

  Hi mate

  Didn t find such a problem described discussions, it seems that you are the first person who has reported this

  Have you tried to reinstall the webcam software?
  Try this.
  First remove the software of webcam and then after new reboot, install the new downloaded webcam software.

  PS; have you removed the thin sheet secure the lens of the webcam?
  Check it!

• Satellite L50D-B - TouchPad does not work properly

  My TouchPad is not working properly, it stops working after a few seconds after the start. Can someone help me?

  To be honest, it is not easy help these problems.
  What exactly happens? Touchpad is completely off? I want to say is there any kind of reaction?

  Have you tried to turn again using the F5 button?

• Satellite 1100 - CD player does not work properly

  Hello, I had problems with my cd player, it will not read anything under windows, but it will read my CD to restore DOS system and restores my whole system. I called someone at the helpdesk and he said to try and restore the system and see what that is and it did not even a difference, please help!

  Hello

  I think that your staff Helpdesk had run Win XP system restore to restore the operating system! If this does not work, you can try to reinstall the standard CD/DVD driver in the Device Manager!

  If this does not resolve the problem, according to me, that a full recovery of the system must be done! Then it will not work!

  Good bye

• Mouse/mouse pad does not work on my Satellite M30X

  Hello

  I started having problems with mouse pad & mouse on a Satellite M30X. By clicking on the icons on the Desktop gives erratic results as evil etc start application and does not. The operating system has been reinstalled with a new hard drive and put BIOS up to date without success.

  Looks like maybe the motherboard has everyone seen elsewhere... and have the solution.

  At soon Scottie

  Hello

  tried with a few external mouse/keyboard? If it is not already then try and check the what happening. In both cases I suggest to contact a local for a hardwarecheckup servicepartner, because your question seems serious and cannot be resolved with software, DO-IT-YOURSELF tips or things.

  Here´s a link to find the nearest servicepartner in your country:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Would be better to let a few technicians do their work ;)
  Welcome them

• Mouse pad does not work on Satellite C855-13D

  Hi, I have a SATELLITE C855 - 13 T.

  I got the TI monthly and now the mouse pad stopped working. Both the touchpad and and right/left clicks don't work. I managed to connect an external mouse on the USB port that works very well. I restarted the laptop several times and also checked the settings of Control Panel-mouse, which indicates that the device Touchpad works properly. I also checked the option to disable the external internal when device is connected is also unchecked.

  I would be very grateful if anyone has any advice on how to get this working again.

  Thank you very much

  To be honest all you've done is just. You need to check if the touchpad is disabled somehow but if everything seems to be on the last and final test you can do is to install original recovery image and test the feature with the factory settings.

  OK, it's a method more radical but more effective to check the operation of the equipment.

  Please post a feedback about your decision what to do and result about if you try to check with the factory settings.

• Satellite A300D - funktion scroll Mouse pad does not work

  Hello
  I use a laptop A300D - 16 c. I have a problem with the mousepad wiered. The right side of the mouse pad, which is used to scroll the page, stop working. This has happened several times and very often. But I am not able to trace what exactly causes this problem. Whenever he stops working, there are different activities.

  A reboot of the system will not solve the problem and it will start working again. But I couldn't find the exact reason for the problem.

  It is very annoying, we the scrolling feature will stop working. All parameters of this mouse pad are the same and has not changed.

  Anyone know this problem with A300D and have a solution?

  Please share it with me.

  Thank you
  Méhul

  Hello!

  It's not easy to say what the problem is, but you should do an update from the touchpad driver.
  You can download it on the Toshiba driver download page:
  http://EU.computers.Toshiba-Europe.com

  Furthermore, you have the problem only with the keyboard or an external mouse too?

  Good bye