Satellite L850 - opens the BIOS on reboot, even if no one press F2

Similar Questions

• Satellite L850 cannot access BIOS by using the F2 key on startup

  I'm trying to get to the BIOS of a Satellite L850, but now the F2 then turn does not hit the power switch and then now the "F2" key does not work.

  The key does not work, press fn and F2 change the brightness.

  Any help would be appreciated.

  A retired old man, the only easy solutions and it is not my PC, I try to help a still older retiree.

  Hello

  If you use Windows 8 Please perform the first full stop. After doing this restart your machine and press F12. There you should be able to find the opportunity to enter the BIOS settings.

  Check it please t.

• Computer opens in the BIOS after reboot

  No idea why my computer opens in BIOS will receive reboot? I'm not in contact with other buttons.

  1-2 Yes, but if you have enabled "F12" probably the BIOS want to know the boot manually device (probably a problem); good to hear it's fixed now.

  3. the link is good, it works for me, by the way you can check on the Acer support website

  http://us.Acer.com/AC/en/us/content/drivers/4848;-; Longs % 20M 5 - 583P

  Click on BIOS and download the version 2.29

• After that update the BIOS cannot reboot my Satellite A200

  I did the bios update for the trueearnings tol, just instructrion restart so I can't reboot my computer, then, what can I do?

  Hello James

  It sounds pretty bad for me. It is typical behavior if the BIOS is damaged.
  What you can do? Unfortunately not much besides make the closest meetings of Toshiba authorized service provider and ask for help.

  I'm sorry. :(

• Cannot open the BIOS UPGRADE FILE

  I download the file from the site Web of TOSHIBA BIOS UPDATE. My TOSHIBA satellite laptop computer runs on windows vista. After downloading the file zipped from the BIOS UPDATE I couldn't open it. SO my question is how to open compressed file? I'm surprised that my laptop is delivered with the decompression program?

  Hello

  It is unusual for an unzip program IS built into Vista. But if it's really working then download winrar (www.winrar.com) and unpack it with this program. You have to work, otherwise the file is damaged and needs to be re-uploaded.

  Welcome them

• Satellite C650D - how the BIOS boot CD?

  Hello

  I'm trying to make a disc bootable image to update the BIOS for the model Satellite C650D (PSC16A-02U011).

  Can someone point me in the right direction? I found the download area of the driver for this model, but the update to the BIOS it is only an exe file and my laptop has no operating system on it at the moment.

  If I try to load the system hard disk and then use the exe it gives me all sorts of problems so I m try to Flash the BIOS from a CD while the hard drive is out.

  Then after that I updated the BIOS I have reinstall everything.

  Thank you

  {quote} I m try to Flash the BIOS from a CD while the hard drive is out. {quote}

  I m wondering why you n t replace the HDD and install Win 7 first.
  Then you could update the BIOS (if necessary)

• Satellite L300 - after the BIOS update I have a black screen

  Welcome! I have a big problem.

  I improve my Satellite L300 BIOS to the old version that I download on the official website of Toshiba. I turn on the update program and after about minute, the system will shoot down and on the screen I see black screen only. The light on the drive flashes green and the led in the DVD-ROM flashes orange. I have no idea what's going on.

  Please help me!

  Hello

  It sounds like this during the update of the BIOS, that something was going wrong. I think that the ROM module must be reflashed or in the worst cases, the motherboard should be replaced.

  In any case, you should contact an ASP for help. Technicians can try to reflash the ROM module and solve this problem.
  If you don't know where is the nearest ASP, you can search on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good bye

• Satellite L670 - update the BIOS

  Hello

  I own a Toshiba Satellite L670 running on Ubuntu Linux. I want to update my bios from version 1.00 to last version 2.30.

  But the site offers serverals versions window and one version of the OS "independent." I downloaded it and the .zip file contains only an .exe file I can't use with Linux.

  How can I update my bios? Not there at - it no .bin file?

  Thank you.

  This Toshiba laptop model no is not supported for Linux and all offered stuff on the download page are designed for the Windows operating system only if you cannot update BIOS if you use the failure to take in charge of operating system.

  Anyway, if there is a problem with your laptop BIOS update is not necessary.

• Cannot start by Satellite L850 - no boot device - please reboot

  Hi, can you help me?

  I have a toshiba Satellite, win 8, and when I try to start it it shows the message 'check' media (fail) and then shows "no boot device - please restart."

  How can I solve this problem?

  Unfortunately for these questions there is not some sort of magic bullet. Start your laptop and press F12 to get into the boot menu. If it works check if there is the option to enter setup. Choose this move down arrow and press ENTER.

  If it works, you will see the BIOS settings. On the first page (HAND), check if the HARD drive is listed and recognized correctly.
  In any case, use F9 and BIOS to the default settings. After doing this use F10 to save and exit.
  Check again please. If the same thing happen over and over again I fear you have professional m need help with this.

  What model of laptop do you have exactly?

• Satellite A110 - update the BIOS for Windows 7?

  Hello. I found two drivers support page to your versions of BIOS for my Toshiba Satellite A110:
  01/21/09
  Update the BIOS
  Toshiba Windows Vista 32 bit 5, 40 - WIN World Wide
  01/21/09
  Update the BIOS
  Toshiba OS independent 2, 00 - WIN World Wide

  In 'other info' page on first bios there is a warning that this version is only for windows vista, and on the second page 'other info' he warns, that this version is not compatible for notebook computers equipped with Windows Vista.
  My first question is what this means? If I have OS Toshiba idependent 2.0 BIOS will not install Vista?

  My second and more important question is what version of bios should I install if I now use WINDOWS 7 32 bit?

  Hello

  > My first question is what this means? If I have OS Toshiba idependent 2.0 BIOS will not install Vista?
  You should be able to install Vista using BISO 2.0 but maybe your laptop will generate some questions
  So you need to update the BIOS to 5, 40 - WIN version if you want to use Vista OS.

  If you want to use Win 7 on your laptop then you must first install the Win 7 OS and then you should check out how Windows 7 is running

  Welcome them

• Upgrade memory satellite A110-103 - the Bios shows only 1 GB of RAM

  {color: #000000} Dear Forum Toshiba,

  I own a Toshiba Satellite A110-103 (PSABE6) bought in 2006 of the Belgium.
  I have trouble about an upgrade of RAM for this laptop. The laptop was originally a Samsung 512 MB of RAM.
  I tried to upgrade the RAM to its maximum capaity supported 2 GB.
  I bought and installed 2 Kingstone SODIMM 1 GB Value Ram DDR2 PC2 4300 units compatible with the laptop, but

  in the BIOS, I see only 1 GB of RAM.
  I tested each RAM separately and they work very well. The problem is that when I install in my

  locations of the laptop, my BIOS sees no Ram.Instead 2 GB 2 GB, it shows only 1 GB. I updated my BIOS for more later

  version 1.70 (for XP), but the laptop continues to show only 1 GB.

  I tested the RAM separately:
  -inserted only 1 stick in the drive and the pc started ok showing 1 GB of RAM
  -then I inserted the same stick in another location and it also worked well showing 1 GB of RAM
  - then I checked another unit of the RAM in the same way and worked well
  -When I try to put 1 GB of Ram and the old 512 MB RAm the BIOS correctly showed the new value of 1.5 GB
  -i also checked the other 1 GB of ram and the old 512 MB of ram and showed good again in the Bios with the value of 1.5 GB
  - but when I tried to put the 2 ram set units to obtain the BIOS only detected 1 GB 2 GB.

  Here's the description detailed 1 GB modules that I try to install:

  SLOT #1
  The module size: 1024
  Band Max bandwidth: PC2-4300(266Mhz)
  Manufacturer: Kingston
  Reference number: 9905293 - 0.14A00LF
  Serial number: 6ACC0C46
  Frequency: 200-266
  CASE # standby time: 3,0-4,0
  RAS # for CASE #: 3-4
  Tras:9 - 12
  TRC: 12-16
  Voltage: 1, 8V - 1, 8V

  SLOT #2
  The module size: 1024
  Band Max bandwidth: PC2-4300(266Mhz)
  Manufacturer: Kingston
  Serial number: AD0CCE10
  Frequency: 200-266
  CASE # standby time: 3,0-4,0
  RAS # for CASE #: 3-4
  Tras:9 - 12
  TRC: 12-16
  Voltage: 1, 8V - 1, 8V

  What should I do?
  Help, please!

  It IS concerning.
  Marius Militarescu

  [email protected]

  {color}

  I think the problem is that the two s of RAM are not compatible, but it is not explained to me because use you two identical modules.

  In your case I return the RAM to the computer dealer and say the modules work together in your notebook, but your laptop definitely supports 2 GB of RAM.

  I think that there is no other way because you have updated your BIOS to the latest version.
  Here is the part number for RAM Toshiba compatible:
  1 GB OF DDR2 400/533 (PA3411U-1M1G)

• Satellite died while the BIOS update

  Has been downloaded new update of the BIOS and portable powered down in the middle and when I reboot I have nothing on the screen and the computer seems to do nothing.

  What can I do to recover my software or reset?

  Hello

  I'm afraid that you can't do anything m
  Seems that the ROM module where the BIOS is stored, has not been flashed properly and prevents the computer from starting properly.

  You need professional help
  You should get in touch with a local ASP in your country and have to ask for help.

  Greetings

• L50t-A-145 - angle which satellite is opening the lid?

  Hi guys,.

  I'm considering the purchase of a Satellite L50t-A-145, but I really need the cover/display to open at 135 °. The reason for this, I'm a DJ and have a Tablet laptop at 45 °, so with the laptop that I need the screen to go to 90 °, plus another 45 ° to take the screen vertically.

  Can anyone of you let me know what kind of angle opened the l50 to? Today, it is difficult to get any laptop to exceed 120 ° due to the modern design of hinge, the real pain for all those who want to open more.

  Thank you.

  Operating instructions, you can find the info that the screen can be opened to a wide range of angles for optimal playback, but it does not provide the values accurate Angel.

  My Satellite U500 cover can be opened at about 120 °, but Max.
  I guess that the same values would be available for L50T too.

• Satellite U400 - after the BIOS update I can't start Windows

  I have laptop Toshiba Satellite U400, PSU44E and Win XP. After you have installed the new BIOS v. 3, 80-WIN32, it is not possible to start Windows, it always ends in restart. It is also not possible to reinstall Winsdows, as it always ends with the blue screen.

  Any help or suggestion?
  How can I install back my backup BIOS BACK?

  Hello

  Did you really choose the good BIOS for your laptop? Because on the Toshiba site Web are different models U400 has so you choose for PSU44E BIOS on Toshiba page?

  After the BIOS, you should load the default settings in the BIOS.
  Did you check that?

  A downgrade from the BIOS is not possible. This is possible only from an authorized service provider. So, you should contact them and ask a technician for help. I m sure they will help you. ;)

  Good bye

• Satellite A300 - after the BIOS update I can not install two OS

  Hello everyone:

  I bought a laptop Toshiba Satellite A300-247 with Windows Vista Home Premium.

  Then I formatted it and divided the hard (320 GB) into 6 partitions and installed Windows Vista and Windows XP on drive C to drive D after having changed the SATA controller mode in the BIOS for compatibility. The computer worked well with 2 operating systems. However, when I updated the BIOS to version 1.9, two operating systems stop working and one of them can be installed: XP can be installed when SATA controller mode is placed on compatibility and Vista can be installed only when the SATA is changed to AHCI.

  Is there is no explanation of what past? And can I install operating systems 2 together again?

  Thank you

  Hello

  First of all, I doubt that this has something to do with the BIOS update. I think that after the BIOS update HARD drive mode has been changed from AHCI to compatibility and therefore the OS didn't start.

  Anyway, in compatibility mode you can install Vista and XP without the SATA drivers. This should t be a problem.

  But do you know the difference between compatibility and AHCI? AHCI mode is faster and therefore I would recommend this mode.
  Like you said Vista you can already install in AHCI mode and for XP, you need Intel Storage Manager. This package includes the SATA drivers you need and here is a step by step guide to use these drivers:
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

  Last but not least, you can install 2 OS. You can do what you want! ;)