Satellite L850 - unidentified network, try to use the LAN card

Similar Questions

• Satellite L850 cannot access BIOS by using the F2 key on startup

  I'm trying to get to the BIOS of a Satellite L850, but now the F2 then turn does not hit the power switch and then now the "F2" key does not work.

  The key does not work, press fn and F2 change the brightness.

  Any help would be appreciated.

  A retired old man, the only easy solutions and it is not my PC, I try to help a still older retiree.

  Hello

  If you use Windows 8 Please perform the first full stop. After doing this restart your machine and press F12. There you should be able to find the opportunity to enter the BIOS settings.

  Check it please t.

• When you try to use the current content, I get the message "network error."

  My photos open in a mixture, but when I try to use the content aware filter, I get the message "network error."

  Can you please try this: logout and log back? Please let us know if the operation is back to normal. We will fix a bug in this area in a future release.

• Firefox does not open, and when I try to use the "run", it says that the file has been moved, etc. I use Windows 8 and I can't lose my favorites. Help?

  Firefox has been great to work on my computer for months and then suddenly he could not load pages. So, naturally, I restarted my computer, but when it restarted Firefox does not open. The icon lights for a bit as usual, then it fades and never actually opens. When I try to use the "run" command, I get this error:
  "C:\Program Files\Mozilla Firefox\ refers to a location that is unavailable. It could be on a hard drive on this computer or on a network. Make sure that the disc is inserted correctly, or that you are connected to the Internet or your network, and then try again. If it can't be located, the information may have been moved to another location. »
  I also tried the same thing for the file in the x 86 folder, but it gave the same error and I went and looked for the files in the given location and they were there.
  Firefox is not to fall down, so he isn't there an other error message, I can give you.
  The things that I had my favorites are really important, I can not lose those, but I am fine with anything else have to re-installed, etc..
  Help please?

  I've never tried it myself, but the forum has a series of measures for a "clean reinstall" Firefox. Even if you do not delete the record of your personal settings (AKA profile) during this process, a backup of this folder is always a good idea in case something goes wrong.

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

• Satellite P750 - overheating when using the graphics card

  I have a Satellite P750. I have a few games that I love to play, but I am unable to because that laptop overheating during the execution of these games.

  The specifications of the P750 with GeFORCE 540 m graphics card and 8 GB of ram easily meet the requirements of the games (Counter strike source, cod mw3).

  While playing the games for about 10 minutes, all right.
  After this step, things start to warm up, and small defects appear on the screen.

  Small rectangles of messed up graphics.
  If I don't leave the game immediately, I get a BSOD with errors such as "IRQL _less_than_or_Equal.

  The vent on the left side of the laptop runs very hot when this happens.
  I cleaned dust vacuum on and uses a fan/cooling pad to try to cool it.
  Makes no difference.

  I updated to BIOS and graphics card drivers

  WHAT CAN I DO TO PREVENT OVERHEATING WHEN YOU USE THE GFX CARD

  Hmm using the page of the Toshiba driver graphics driver?
  Such driver is a bit different from the other nVidia drivers because it s modified for mobile use. It contains some kind of overheating protection.
  In case of higher temperatures of GPU, such driver would clock down GPU performance in order to increase the temperature of the GPU.

• Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  • I am running Windows 7 for packs SP 1 or SP 2 does NOT solve my problem since neither one works with Windows 7.  Is there a way to search for this MUI (Multiple User Interface) missing file? The every thing must have himself installed in the first place. I took my mom (she died in June) and my brother on this PC as users so even if they do not use this PC supports multiple users. Maybe if I deleted as a reboot and additional users it will solve my problems. My updates install OK but I can't run at all system restore. It creates a restoration point OK but when I try to sr back to a restore point before I get the error 0x80073AFC topic of the missing MUI file. Then, when I spear SR it is said that he could not and no files have been changed because of the error 0x8000FFFF error, unspecified catastrophic failure and could not retrieve the file several times when system restore is attempted.

    I'm running Windows 7 on a HP Pavilion with browser Firefox 3.6.8 browser Opera 10.60, IE8 and Google Chrome 5.0.375.125 browser browser.

    Can you tell me what I try next? Thnks a lot and sayonara for now the guy-Jack McElwee / keimanzero the Scion of the Anime in Brookhaven PA - USA

    OK I tried everything and nothing works! Only added beginners are updated browser Opera 10.63; IE9 (Beta); Firefox 3.6.12 and Google Chrome 7.0.517.41 and Java 22. Of course like everyone else in the world, I had to uninstall/enable and disable/download again and reinstall new Adobe Flash 10 and 11 of the shock wave and they keep crashing too! Hello 4 keep screwing browsers and now I get connection network problems. I run Comcast doctor and did everything it said to do, but nothing works. Oh and I added 7-Zip and WinZip also. Likewise, they will not work! Help! Thanks - K & K

  keimanzero,

  Comcast of Norton Security Suite version is installed? If Yes, who and perhaps malware is most likely to cause questions you have published, in particular the failure of the restoration of the system.
  First, configure the system to boot - How to solve a problem by performing a boot in Windows Vista or in Windows 7
  NOTE: Start-up mode minimum state all the 3rd party firewalls will be disabled. Open Control Panel > Windows Firewall to make sure that the native firewall of Windows 7 is now on.

  Download and Save the update system (or CheckSUR) tool. You will need to download the specific Version of CheckSUR corresponding to the architecture of the system to Windows 7. If you do not know the architecture of the system, and then click the link that says "Click here to show or hide the instructions step by step with images" under method 2: download the update directly system preparation tool from Microsoft Download Center .
  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  Once the download is complete, close all open programs and browsers. Now, run CheckSUR with the system connected to the internet because it will download the .cab for system files. Reboot once CheckSUR is complete.

  Secondly, I suggest that you run the File Checker system while in the same clean boot state.
  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the field search programs and files .
  2. Right click on cmd.exe in the programs of list, and then choose 'run as administrator '.
     If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  3. At the command prompt, enter the following line exactly as written including the space between thec and the/and then press ENTER:
     sfc/scannow

  When the analysis is complete, test to see if the problems facing the system have been resolved.

  If they are not, you will need to contact Norton support for the version of Norton Internet Security Comcast to get help, or just uninstall NIS, run the Norton removal tool (right click Norton_Removal_Tool.exe, choose "Run as Administrator"), reboot and then check to see if the problems are still occurring.

  Expert MowGreen Windows IT Pro - consumer safety

• How to use transfer windows for xp to xp. When I plug usb computers are delivered to the top with the same screen and when I try to use the transfer to the new computer, it just said information gathering and sits for hours

  How to use transfer windows for xp to xp.  When I plug usb computers are delivered to the top with the same screen and when I try to use the transfer to the new computer, it just said information gathering and sits for hours

  Hello, welcome.

  The process is automatic and the maximum transfer rate should be about 20 GB/HR. If the process crashes during that long of a time, it's probably because of something internal rather something you're doing wrong.
  For reference purposes, I included this link. It goes into the details of the migration from XP to Vista (and the basic steps you follow). The instructions are for migrating to Vista via the network, but you can easily follow the steps and choose a different option for your specific installation.
  http://www.windowsnetworking.com/articles_tutorials/migrating-Vista-using-Windows-easy-transfer.html
  For both machines, I recommend you to prepare for the transfer using the following procedure:
  1. click on START > run

  2 type "msconfig" (without the quotes) and press enter

  3. go to the "Startup" tab and uncheck all the entries displayed

  4. click on 'Apply' at the bottom right

  DO NOT RESTART YOUR COMPUTER AGAIN

  5. click on START > run

  6. Type "cmd" (without the quotes). Right-click on the result at the top of the menu START and select 'run as administrator '.

  7. type chkdsk /r and press enter

  8 allow the system to attempt disassembly of the volume

  9. allow the system to plan restarting

  10. restart your computer

  11 let checkdisk analyze the file system on your hard drive

  12. Once completed, perform the same steps on the other machine

  13. Once completed, repeat the transfer

  
  Let us know what happens

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I try to use the send to compressed (zipped) folder option I get an access denied message

  When I try to use the send to compressed (zipped) folder option when I right click on a file I get the following message

  Unable to complete the operation.

  Access is denied.

  However I do have permisions complete on the file and I am the only user and administrator

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, try to start in safe mode (repeatedly hit F8 key so that the start and go in safe mode with networking).  Then we will check some of your system files:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well it will complete with no corruption, he couldn't fix it (if there is such corrouption post here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.  This can sometimes solve the problem on its own.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.

  If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side.

  I hope one of these procedures can solve your problem.  If this isn't the case, after return and we will try something else.  Return message anyway so we know how it turns out.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• Unidentified network, cannot connect to the internet + 169 ip address

  Hello!

  I also have this annoying problem. I've seen a lot of posts similar and tried all the proposed solutions, but nothing worked.

  I have a

  ZTE zxv10 w300 camera and 2 computers (a laptop and a normal pc)

  There is no internet access on the computer that is not connected to the router with the cable. It can connect to this unidentified network, but not to the internet.

  This is the case with both computers.

  In addition, the computer that is first connected to the router with cable, will have this 169 ip address.

  I could solve this problem by disabling the wireless adapter, turn off the router, and then turn on the router and activation of the adapter, but then it changed back again. On one of the computers, or both.

  Any ideas what could be the problem?

  Your wireless card is not connected to anything.  The lines in bold show that the wireless adapter has an IP address that is generated by 'Addressing IP private auto' (APIPA).  This is what happens when the adapter is configured to obtain an IP automatically from a DHCP server (for example, your router) but isn't able to get one, either because the DHCP server on the router does not work (not in your case), or because it is not a valid connection between the adapter and the router.

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: Atheros AR5005G Wireless Network adapt
  Physical address.... : 00-1D-0F-F4-36-5B
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::19db:c2d7:452d:b16a % 11 (Preferred)
     Autoconfiguration IPv4 address. . : 169.254.177.106 (Preferred)
  ... Subnet mask: 255.255.0.0.
  ... Default gateway. :
  DHCPv6 IOOKING...: 184556815
  DHCPv6 DUID customer...: 00-01-00-01-1A-36-12-69-00-1D-0F-F4-36-5B
  DNS servers: fec0:0:0:ffff:1 1%
  FEC0:0:0:FFFF:2 1%
  FEC0:0:0:FFFF:3 1%
  NetBIOS over TCP/IP...: enabled

  On wireless connections, it is almost always the result of a misconfigured encryption password, but it can also occur if the router is configured with a MAC filter (or any other security measure) in order to prevent the connection, or if a firewall on the computer is not properly configured.

  From the network and sharing Center, click on the link 'Manage wireless networks' to get this screen:

  

  You can do several different ways.

  1 remove all wireless networks configured except a you know relate to networks other than your own, you will need to keep (for example, a wireless network at work).  Now connect to your network without wire in the usual way and carefully enter the encryption password.

  2. change the wireless network appears in the list to have the correct encryption password.

  3 remove all wireless networks configured except a you know relate to networks other than your own, you will need to keep (for example, a wireless network at work).  Connect to your router with an Ethernet cable and connect to the router configuration utility.  Disable all configured for the router security measures: encryption, MAC filtering, time of day restrictions, etc.  Now connect to the network without wire in the usual way.  If it works, you can reconfigure the security measures using a router configuration utility (even if there is really no need to use anything other than the WPA2 encryption and a password).

  If you are unable to connect to the router wirelessly when you have disabled all the security on the router, check third-party security software installed on your computer to see if it blocks the wireless connection.

• always says service unavailable when you try to use the apps

  Hello

  I have a HP Photosmart 5510 and whenever I try to use the said apps try not available service later. I can't connect at all more to him.

  Alright. Press the wireless button and press 'Print report' or 'Print Info', it should print a network configuration for you page.

  After that you have, we will need to access the built-in Web server (EWS) printers. You can do this by entering the IP address of printers (from the Network Setup page) browser press and the address bar type.

  Once there, press the 'Network' tab at the top of the page. From there, you'll want to click on the button "IPv4", on the f-side of the page. It will be there for wireless and wired, so make sure you click the one for you, but you are connected. If you do not see "IPv4", you should see 'Networking', press and press "Network Address (IP).

  Then, you click the small round button next to "Manual"IP address", and then fill in the IP address, subnet mask and default gateway using the information available on the network configuration page.

  For the primary or the preferred DNS server, you will want to enter 8.8.8.8.

  For secondary school or another DNS server, you will want to write 8.8.4.4.

  Click on apply and when the message appears saying that the changes have been applied, press 'OK '.

  Press the power button on your printer, wait that it completely power off and press it again to power it on.

  Let me know if that solves your problem.

• Qosmio F20-155: colors wrong when I try to use the S-video connection

  When I try to use the S-video, the photo shows with wrong colors or color of Pentecost. Do I need some kind of driver?

  Sometimes the photo looks like it (press the link to see)
  http://www.jawally.com/VB/uploaded/6_ss.gif

  Please give little assistance...

  Thank you for your time

  Majed

  Hello

  Just a question: you´re talk about the video-in and video output on your laptop, not an expansion or a USB-video output or something else card?
  A machine you have respectively which model do do you have?

  Greetings

• HP 1287c Windows 7: windows 7, try to use the model of hp 1287c hp 5302 keyboard does not

  have a hp 1287c windows 7 tries to use the model of hp 5302 keyboard does not respond

  try to use the old Hp keyboard model 5302 was for windows 2000 did not know if could use when I plug computor does not recognize he wonding if possible to work?

  45fmj

  Hello

  Well, the keyboard is now very cheap, the converter may not work correctly. After 16 years of him please give a rest.

  Kind regards.

• Error 91 - try to use the variant of the function of data

  I'm running a problem when you try to use variations in my application. I have a setup of State machine that a State creates a list of tasks (cluster of tables), and then converts it to the Variant. The variant is fed into a shift register that allows me to access the list of tasks of a different State.

  The problem comes when I try to use the variant of the function Data. I right click on the task cluster to create a constant and then wire to the TYPE of the variant of the function Data. I wire the variant of cluster of task to the terminal of the VARIANT. When I run the VI, I get error 91: or the possible reasons: LabVIEW: the variant data type is not compatible with the data type of wired for the input type. ».

  How can I get this error if the type that I have connected to a Terminal TYPE of the Variant Data terminal is a constant created from the exact type created a variant of?

  Section of the machine of the State where I wire the cluster variant:

  

  Section of the machine of the State where I use the data out of the cluster variant:

  

  The constant wire to the terminal of data TYPE variant was created from the cluster that is connected to the Variant type data. I don't understand how there is a type mismatch?

  Is there another State between these two?  I notice you have some tunnels 'Use default if unwired' coming out of the structure of your business.  First of all, clear on the tunnels.  Second, in cases where you do not only affect the data, the data directly from the tunnel entrance in the tunnel exit of the wire.  I recommend using the tunnels linked to make it even easier on yourself.

  With the default tunnels being output, your variant coming could really be empty, so the conversion fails.

• Arrow keys on the keyboard. Try to use the keyboard and mouse.

  New Gateway laptop with windows 7. I play a lot of games online and I can't find anywhere how to change this, or if it's the phone or the operating system. When I try to play a game on IE with the arrows that they automatically stick causing the game almost impossible to play, also when you try to use the keyboard and the touchpad the touchpad locks when the keyboard is in use. Help, please.

  It is a known problem if all goes well with Flash and Internet Explorer.
  Source: http://social.answers.microsoft.com/Forums/en-US/vistagaming/thread/d006871e-4701-4e80-9062-197f28251ac5/

  The only thing you can do is use another browser until what Adobe fixes the problem.

• When I try to use the Windows Update link for my XP computer I get a message indicating that the location where the Windows Update stores data has changed and it needs to be repaired. How can I solve this problem?

  When I try to use the Windows Update link for my XP computer and after using Windows Mr. Fix - It, I get a message indicating that the location where the Windows Update stores data has changed and must be repaired. How can I solve this problem?

  I'm not that computer literate and do not understand what needs to be fixed.

  This problem just started a few weeks when I noticed that I had any recent download automatic update that I regularly get. So I tried to do it manually through access via my control panel.

  I use ESET Antivirus Node32 software.

  Hello

  1. What is the error message or an exact error code?

  2 have you made changes on the computer before this problem?

  3. you try to check the updates?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Reset Windows Update components and then try to download the updates.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756

   

  Method 2:

  File system scan tool checker and then try to press Ctrl + Alt + Delete and check.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe):

  http://support.Microsoft.com/kb/310747

  Please respond with more information so that we could help you more.