Satellite L850 - weird noise problem (not events)

Similar Questions

• Satellite L850 - charger / battery problems, not normal...

  Hi all.

  First post and all, I had a glance through to see if I can find my particular problem, and I don't think I can.

  I posted this in another sub-forum, but then realized it's here... oops!

  A L850. It will work fine on battery, but only supplies not the charger cable. Helpfully, a colleague also has an another L850 (I bought two together) so I can charge my battery of separately in his machine.

  If I start the machine on a charged battery, it works fine. If you connect then the power adapter, the led is lit on the front of the machine, but it's clearly not load the machine works until the battery is flat and then turns off and will not turn on back until you charge the battery apart and put it back in.

  Whenever the machine is powered, it also complains that the RTC battery is flat, and you will need to set the time in the BIOS. It is the coin cell CR2032 internally on the motherboard isn't?

  what I don't understand, is that the unit understands clearly that the charger is plugged, as seers to say it is the battery. Except that it isn't, and is not to be unity. Œuvres battery for about 40 minutes of our days, after that, dead machine.

  Any ideas? I suppose that there is something wrong with the internal charging circuit, but the fact that the LED lights up when it is plugged suggests otherwise...

  Thanks for all the ideas.

  David.

  More information on this type of bit. When it is plugged in, the icon on the screen says "Plugged in, charge", but battery icon animates not charging about 10 seconds, then stops, and battery is clearly not charge as % drops away slowly.

  I found a Google one of them is the "remove all, hold for 30 seconds, reconnect power. This made no difference. I also found advice to uninstall the battery from the device manager driver software and allow it to re - install. This done, still no different.

  I got the hard drive and in a USB enclosure to retrieve all my files and am doing the 'factory restore' option I think that this is a restore hard disk partition. This work is far away, but in my opinion, is still running on battery only, so do not know if this is going to end!

• Toshiba Satellite L850 - display driver problem

  Hello
  I have a Toshiba Satellite L850-1j9, (PSKG8E-02D00KCE), in collaboration with i7-3630QM and an AMD Radeon HD M 7670.

  The problem is, I'm not able to install the AMD display driver. When I try to install the software and drivers this problem appears: https://youtu.be/AOiPq8WVz_M

  The first time that I was using Win 10. I did the update to win 10 about a month ago and everything was ok until 4 days ago. I was working with my laptop with an external screen connected by HDMI and all of a sudden the screen started to Flash some green lines with a black background (something like you can see in the video).

  I saw on the internet that some people have problems making the update to wion10, I have installed new Windows 8 to see if has something related to win10 but the problem persists.

  I tried to install the intel CPU, a graphics 4000HD Intel GPU, but may not use it as a main GPU. I had this problem: "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »

  I need help please to understand what I can do to solve this problem. I took a peek on the internet and so far, I found a solution that could solve my problem.

  Thanks for your help.

  Hey

  any solution?

  Does anyone know if toshiba will make an update of the bios where I can change the graphics card? AMD to Intel...

• Satellite L850-E8S - shutdown problems

  Hello everyone

  I bought Toshiba Satellite L850-E8S with Windows 8.0 (for a single language) preinstalled in October 2013. At the moment I can't get stop normally.

  Question: * pressing Shutdown (stop) of charms goes up "Windows is shutting down" and after that the screen turns off but power light is lit and the fan keeps operate.* I stop it by pressing the power button, I really want to quit smoking. (Once I didn't notice that and put the laptop in a bag for a few hours and it of a miracle that no equipment would have been burnt, despite the laptop was hot like the Sun) * the problem started after a month of use, and I didn't think her yet.*

  First of all, I thought that the case concerns him * hybrid Shutdown in the Win8. I have visited many forums dedicated for hybrid stop, proven fruitless discussions. *! AND! I had the same problem on my laptop with a slight difference - loading Win7 and Linux * the monitor stays on (with the lights and the fan on either). *
  Moreover, I also saw a BSOD after a day I bought the laptop. This problem concerned Realtek Audio driver and SRS Premium sound. As I understood the question is drivers conflict. Right now I have no installed Audio SRS premium and see no BSOD, but Realtek audio driver is not stable: the sound either begins to work in a few minutes after starting windows or it does'nt work at all.

  First of all, I wish really that someone to help me with the shutdown problem. All tips are welcome.

  Hello

  Check it please http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm, change the settings described and try to turn off your computer is turned on on a regular basis.

  It works for you?

• Satellite L850-13 q can not write DVD

  Hello!

  Recently, I tried to write several DVDs without success. It's a problem that took place several days ago, out of the blue, since a certain time has passed since I finally wrote a DVD. I've tried several brands of DVD, so the DVD are not the problem. I also used several DVD writing programs (Ashampoo, Nero, ImgBurn), none of them worked. I don't get any errors during the process of writing, in fact, everything works as it is supposed to. In addition, the surface of the disc is clearly written.

  But when I insert the DVD, Windows is considered as a blank DVD. I use Windows 8 (the script used to work perfectly before, also under Windows 8) and I am very sure that no harmful changes to the operating system has occurred, since I also did a clean installation of Windows, the result of Scripture being the same.

  DVD player satellite L850-13 q (TSSTcorp CDDVDW SN-208AB)

  Help?

  Have you checked DVD burned on some other PC? Are all recognized as blank discs?
  What is with the CD? Have you noticed the same problem with burning data on CD empty?

  It's really strange question, and it's not easy to say what can be the problem. If I understand you just the same problem persists with the installation of operating system clean (factory settings), right?

• Re: Satellite L850 - BIOS update problem

  Hello

  I have problem with my laptop Toshiba Satellite L850 (PSKDLA-0C900R). When upgrading the BIOS to 6.1, there was windows pop up with error

  "Flash process will end!
  Current platform have secure start capability, it must provide the location of storage interface IHSI NV.
  Please contact BIOS OEM enginner to add functionality... »

  I pressed OK on this error and it upgraded the BIOS, but now I can't change any option in the BIOS, I can get into the BIOS settings and can see BIOS options but it does allow me to change a

  for example if I want to change the boot order, I can go into the BIOS and can see boot order but cannot change or select one of the options

  I use Win7 64 bit

  What should I do?
  Help, please...

  If I m remembering well updates to BIOS version 6 is designed for Win8.
  If it is not necessary to don t change anything.

  You have problems with your machine?

• Satellite L850-150: Webcam does not work

  Hello world!

  First of all, sorry for my English not good enough. I'm from the Spain and I bought a laptop Satellite L850-150 less last year.

  The problem is that I have not tried the webcam so far, and when I did, it does not work!
  When I used the webcam application, it is said: "it is impossible to start the webcam. Check the camera and restart the application or computer.

  I reinstalled the driver for the webcam, but it does not work still... you have any idea or solution? Thank you

  Hello

  What is the status of the webcam in Device Manager?
  Webcam is properly recognized?

  The webcam can be enabled and disabled in the BIOS.
  That's why I recommend you to check the BIOS settings.
  BIOS-> Advanced-> Configuration-> webcam system

  If his permit and if the webcam is properly recognized in Device Manager, I think that you must uninstall webcam once more.
  Then you must clean the registry using some tools like e.g. CCLeaner. It is a freeware software. By using this software you can remove some temporal files and can repair and clean the system registry.

  After this short cleaning procedure, restart the computer again, download the latest webcam software of the Toshiba page and install again. Reboot once more and then try to stars of the webcam.

• Satellite Pro L20 keyboard problems not fixed by the update of the BIOS

  Hello

  When I type in MS Word or another application, certain characters are not displayed. This problem is known.
  I followed the recommendation of the TOSHIBA BIOS V1.30 for PSL25E update. Unfortunatey, it does not help.
  I would be gateful to any Advisor.

  Thank you
  olbur

  Hi Olbur

  I didn't find any official document on this subject, as you say, known issue. Can you please send a link?

  I have the Satellite L20 and there is not much difference for Satellite Pro L20 and I have no such problems, but I'm interesting about this. The L20 keyboard is not the best one, but all the characters are not displayed correctly. Maybe you type fast. ;)

• Satellite L850 - indicator wireless is not off

  Hello

  I have the Satellite L850
  Windows® 7 Home Premium 64-bit (pre-installed, Toshiba-HDD recovery)

  When I switch the lan wireless off (using f12)

  the indicator doesn't turn off wireless!

  I have not found "the indicator wireless settings" on my system!

  any help please

  Thanks in advance

  Some models are delivered with Win8. Can you please send the exact model number? I just want to check the specification.

  Anyway, if you have Win7 when you press F12 can you see at the top of the screen flash cards?
  When you press FN + F12 you see option ON / OFF for the WLAN?

  Somehow, this question is strange to me. When you use the laptop with the settings, it should work properly.

• Satellite L850 - special function key not working not properly

  Hello world

  I had Satellite L850 bite of windows 8 64 (pskg8a-07f001) running for only 2 months.
  Only within this week, the special function key does not work do not, whenever I start the pc, I have to go into toshiba assist office then the function key, and then click ok, it will work.

  But the touchpad has been defined as licence also under keyboard setting was defined as special function mode. But don't know why every time you start the pc must go in the function key box, and then click ok.

  When I bought everything is ok, I can use the special function key to turn, up and down the volume and disable wireless... etc.

  Please notify. Thks a lot!

  Have a look here:
  Function key change to Satellite and Qosmio 800 series
  http://APS2.toshiba-tro.de/KB0/TSB2903E00000R01.htm

  You can use the traditional keys FN + F mode or just a F key mode.
  This can be enabled and disabled in the BIOS or the HWSetup

  In BIOS go to Advanced-> system-> the function mode button configuration
  This mode can be changed
  Also remember that the function button is activated too

• Satellite L850-1v0 - alert "Cable not connected" when external monitor OFF

  Hi all

  I have a portable Satellite L850-1v0.
  My monitor is an A.c.e.r X233H
  Windows 8

  I have the setting 'Disable the display' 5 minutes.

  However, when the laptop off the screen I get a small box that bounces around the screen stating "Cable not connected". The monitor is connected via the VGA port.

  If I connect the monitor to my other machine it turns off fine and do not show this message.

  How can I get the laptop to turn off the display correctly?

  Thanks in advance
  Richard

  > when the laptop off the screen I have a small box which bounces around the screen stating "Cable not connected". The monitor is connected via the VGA port.

  The message appears because the signal to the external display was interrupted because of the setting: turn the display off.

  > If connect the monitor to my other machine it turns off fine and does not show this message.
  I think that the other computer/laptop supports another graphics card and so this message does not appear.

  Satellite L850-1v0 support and use of the 4000 Intel HD Graphics intern, who is part of the processor Intel® Core i3 - 3120M and this graphics card shows these alerts

• Satellite L850 - Win8.1 will not let me install the chipset drivers

  Hello

  After I've upgraded to pro 8.1 windows 64 bit 64-bit windows 8 (preinstalled), I thought that windows will not let me install the chipset drivers (downloaded from "toshiba site" for windows 8.1 pro 64-bit), but they stay with windows drivers installed for them.
  The Device Manager displays all installed and properly using. In addition, during the implementation was executed to install the chipset driver, he skipped most of them, to install a missing driver only (unfortunately have not kept any screen to show). I tried to install using the Device Manager (automatic search or manually navigating the computer files downloaded from the site), but it keeps saying that the drivers are up-to-date (drivers with the version from 2006, when later seen on the site are 2014). Any suggestion what to do?

  Model name: Satellite L850-1MK
  Version of the operating system: Microsoft Windows 8.1 Pro 6.3.9600
  CPU: Intel (r) Core i7-3630QM cpu @ 2.4 GHz
  GPU: AMD Radeon HD 7600M

  Hey... good news.
  Thanks for the comments.

• Satellite L850-147 - Audio problem with output jack and balance

  Hi all

  When I plug in my headset on my laptop (Satellite L850-147) and try to listen to music, I hear music (instrumental parts)... by far, I can hear the voice of the singer.

  I found a turnaround with the adjustment of balance in realtek HD audio manager 100% or 100% left...
  But this isn't the way that music have to play...

  I have reinstalled the Realtek HD Audio Manager but without success...
  Any idea?

  Thank you

  Hello

  And have you checked the settings in the software you use to play the sounds?
  Of course the Realtek HD audio Manager supports the sound configurations and you can change different sound effects such as environment and Equalizer but the same or similar options are supported by each software reading and I also recommend to check this!

  By the way: Toshiba laptops are pre-installed with a HD Audio SRS Premium application. To access this, go to:
  Start-> all programs-> SRS Lams-> SRS Premium Sound Technology
  Here, you will also get some options that could be interesting for you.

  Also recommend checking Audio improve
  Make a right click on the icon of speakers in the taskbar then on playback-> speakers devices->, click Properties
  On the development tab, select the sound effect you want and click on apply.

• Satellite L850 - speaker right does not, Win7 32 bit

  Right speaker L850 satellite does not work in Win 7 / 32-bit

  That headset stereo speaker OK.
  Thank you for your good advice;

  Best regards, Joh

  Check please if the Toshiba PC diagnostic tool is preinstalled on your laptop.
  If so, run it and check the operation of the equipment.

  I presume that this tool will ends with the same result. On this virtual path, we cannot say with certainty this diagnosis, but I assume that the speaker is either faulty, or there is a problem with the speaker cable.
  Good advice? Contact the nearest Toshiba service provider and ask for help.

• Satellite L850 - HD Webcam does not work

  Hi, I tried to get my webcam to work, but apparently not, I had a glance online but does not, so you are my last chance before you give up and buy an external one to send back to you. I'll try to give you as much information as possible.

  I've had this laptop since 21 August, I bought from PC World. It's a L850 Satellite with Windows 7 64-bit

  Initially, the webcam has functioned well, everything was great and I thought it was great.

  Then all of a sudden a few weeks, he just stopped. I had a small notification in the bottom left of my screen that says "USB device not recognized", Uh oh. Whenever I try to use my laptop says that it has one. For a few weeks, the camera would be ok, and then not ok, that would change. Sometimes I could use it, other times I just couldn't.

  I had a look in Device Manager, and there was no mention of "Imaging devices" as it was before. But there is an 'unknown device' in the 'Bus USB controllers' falling down, with a yellow sign above it.

  Here's what I've tried so far:

  Drivers - I have followed the advice of a forum and downloaded the latest apparent Webcam driver for Windows 7 64 bit. Excerpt on my desktop and ran the .exe. After pressing the Start button, it loads and asks if I am sure I want the program to make changes to my computer. I press Yes, but then nothing apparent happens. I expected a "drivers installed correctly" or something, but nothing happened, and the problem does not go far. I don't know if it was supposed to be anything, but eh. I downloaded a program called DevManView which allowed me to see all the features that were already on the laptop. My "Toshiba Web Camera - HD" was among them, so I took a peek at the properties. He said "disabled: no, connected: No. I came to the conclusion that it is connected, but for some reason my laptop any works just simply can not what it is.." Is there something I can do?

  BIOS - in the BIOS, the webcam is enabled.

  System Restore - is went to when the Webcam would have worked, but nothing helps, no change.

  Changes/webcam system changes that may have caused the problem:

  I have used what we call Fake Webcam, so I could replay videos more at my cousins through Skype, I uninstalled since all this. I've never used the webcam normally when I'm fake webcam, but then when I tried, it wouldn't work, so when I uninstalled Fake Webcam, he stated that no camera has been detected.

  I am at my wits end, I really want this thing to work, any suggestions?

  Best thing for you would be to make ultimate check and reinstall the recovery image and test the functionality with the factory settings. I know that this is a more radical method, but after doing this, you will see if the cam is recognized and registered properly or not.

  If the problem starts to be present again, I think there may be a hardware problem.
  What do you think of all this?