Satellite L855-149 - Synaptics touchpad does not work after upgrade to win 8

Similar Questions

• Satellite C50D-B-120 - buttons on the touchpad does not work after upgrade to win 10

  I just bought this new laptop. I have updated to Windows 8 Windows 10. Everything worked fine before the update. I am now active on Windows 10 and the mouse pad does not work. Initially, the entire mouse pad not working, I couldn't even move the mouse on the screen. I had a play around in the settings and have managed to get the work of the mouse, but now the button of mosuepad. I searched around the computer for the settings to solve this problem, but I had no luck.

  Please any help would be great, begin teaching and could do with getting this issue sorted.

  Thank you!

  You need to uninstall the driver for the touchpad (MOMENTUM or Synaptics)
  After that, restart the laptop...

  You can also try to update the driver in Device Manager... but the unit must be connected to the internet...

• Satellite Pro M30-701: TouchPad does not work after installation of XP Pro

  My touchPad does not work after reinstalling XP Pro OS with recovery disk. I install a driver for Toshiba M30 - 701 Synaptics TouchPad tpdrv-sp-m30-xp - 7920.zip

  Can you help me solve the my problem please?
  Excuse my bad English...
  Thank you
  Jorge Neto

  HI Jorge,.

  If you have reinstalled your system using the Toshiba recovery disks the touchpad should have the right drivers and be fully functional. I seem to remember that it is possible to disable the touch pad using one of the "keyboard shortcuts" (F9 on my SA30) in order to check that it has not been inadvertently pressed.

  Kind regards

• Z410 Touchpad does not work after upgrade to Windows 10

  Hello

  I have the Z410 (2 years) and since the upgrade to Windows 10, the TouchPad does not work!

  • I updated the driver with no luck to make it work.
  • Solutions used Lenovo Center, digitised material and nothing shows a hardware or driver missing.
  • In Device Manager it shows any missing material.
  • Settings > devices > mouse & Touchpad... The touchpad tab shows her where this versioned (Alps Touch Pad - 8.201.1611.252)

  Any tips?

  
  

• Satellite P200 - 10 c: camera does not work after upgrade to Vista ultimate

  After the full vista upgrade webcam did not work. After some research, I found that I had to change the driver for usb video camera I did.

  Everything works fine now except the snap button of the camera software. Record audio and video works fine. Snapshot button does not work after you have clicked on it. Can someone help me solve this problem too.

  Hello

  you have reinstalled the software of the camera (not only the drivers) that controls the special features snapshot-thing like that?

  It should contribute to reinstall everything because vista is confusing every driver/software maximally... :)
  Would appreciate comments on your success.

  See you soon

• Satellite A300-20 b - Touchpad does not work after BIOS update

  I've updated the BIOS on my Satellite A300-20 b latest version 2.00. Update succeeded, but when I rebooted system touchpad has stopped working.

  I tried to find the solution, resettled drivers (windows XP system). In the Windows Device Manager there is no problem with Synaptics PS/2 Port Touchpad, I see. Software Synaptics shows no problem I can enable and disable the touchpad, but it does not work for the touchpad. I tried Linux live CD and in this system does not work as good touchpad. I think there is problem in this version of the BIOS.

  Does anyone have the same problem?

  Hey Buddy,

  Have you tried to turn the touchpad on or off if you press FN + F9? Check this please!
  Also, try to load the default settings in the BIOS.

  What happens if you connect an external mouse to the laptop? It work?

  I can t imagine that the BIOS update causing this problem. If it doesn't work, you need to contact a service provider for help. They can check the touchpad and replace.

• C850-A797 - Bluetooth driver satellite does not work after upgrade to win 10

  My laptop Satellite C850-A797 upgraded to windows 10 last week and Bluetooth driver not working since upgrade,

  I installed the battery Bluetooth for windows ver.9 but it also does not work.

  can someone help me with this please?

  C850 satellite is not listed as a book of 10 Windows compatible.
  This means that Win 10 drivers are not available for this unit.

  In any case, I recommend you to go to Device Manager and remove / remove Bluetooth all the partners of the devices and entries.
  In the view of mark tab also the option Show hidden devices in order to get the big picture complete.

  Now after reboot, win 10 must search for removed devices and drivers missing.

  I hope this could solve your problem of BT.

• Satellite Pro 6000; sleep function does not work after upgrade W98 SE to XP

  I bought a windows XP cd and installed on W98 on my Satellite Pro 6000. The sleep function does not work now. I probably need a software of Toshiba. What do I need? Where can I find? What is the order of installation?

  Hello

  All drivers Windows XP Home edition, tools and utilities you can find on Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads. You have old laptop model and because of this type of product, you choose option ARCHIVE.

  Order of the facilities is as follows:
  -Windows XP
  -Display driver
  -Audio driver
  Toshiba - common modules
  -SD Card host driver
  -SD Card Driver
  -BlueTooth Stack
  BlueTooth - Easy Connect
  -Mouse driver
  -Modem driver
  -LAN driver included with Windows XP
  -Infrared driver
  -Toshiba Power Saver
  Utilities - Toshiba
  Toshiba - post Mobile
  -Toshiba Console worm.
  -Toshiba Hotkey for display devices

  I hope that you will be able to install Windows XP Home edition successfully.

  Good luck!

• Satellite C850 PSKC8E: WiFi does not work after upgrade to win 8

  I have improved my win 7 to win 8 and now wifi is not working on windows 8! Help me!

  I HAV Toshiba Satellite C850 PSKC8E

  What this means exactly: it does not work?
  Did you install Wlan driver?
  Wireless network card is recognized in Device Manager?
  Have you activated the Wlan before trying to use it?

• Satellite U940 - 4000 Graphics Intel does not work after upgrade from 8.1 to win

  I've updated my Satelite U940 11 X 8.1 Windows (from 8.0) and now my Intel Graphics 4000 does not work.
  The Device Manager shows Code 43: windows has stopped this device because it has reported problems.
  I try to download a new driver from Toshiba, but this is not possible. Whenever the download stops.

  Probably for a lot of traffic on the connection

  Were you finally able to download the driver?
  I could download the package without worrying about performance too

• Synaptics touchpad does not work after a week of use USB mouse

  I have a laptop acer aspire 2920z-4A1G16Mi that has genuine Windows vista home basic SP1... .for a week I used USB mice later, I tried to use my touchpad synaptics but it did not work, but my USB mouse still works. so on the acer website I downloaded the driver and reinstalled again and again, but it did not work.

  In Manager devices every time I click on and click

  Same request I press the CAPS LOCK key on the keyboard my keyboard is locked and iam unable to type even a single letter, although the USB mouse works. I even tried "system restore", but I have not tried "System Restore" which I have no knowledge.

  Thank you for your help!  :)

  Hello

  Contact Acer Support.

  Sorry, no better help.
  Rob - bicycle - Mark Twain said it is good.

• Satellite S50-B-15F - Touchpad does not work after update of Windows 10

  Hello

  Yesterday, that I've updated my S50 B 15F Satellite with Windows 10. Now the Touchpad no longer works. Tried enabling in the settings. This works except for the left and right buttons. I reinstall the software momentum but no change. Any ideas how to solve this problem?

  Thank you!

  Joram

  Here another thread where the issue could be resolved:
  https://Forum.Toshiba.EU/showthread...-to-Windows-10

• Satellite L350 - built in microphone does not work after upgrade Win8

  Hi people,

  I have this problem since I went from Vista to windows 8. my sound card seems to work ok. My webcam works also. I made sure I chose the right microphone on the Panel etc. so theoretically there is no reason why it shouldn't work... but it is not working.

  im guessing it has to do with my laptop being old enough, so no compatible drivers? I have a Satellite L350.

  What should I do?
  falone buy headphones?

  best!
  Al

  I understand that you want to use newer OS on this old piece of hardware, but it can be problematic to use it if certain model of laptop is not fully compatible.

  I think you're the first person who reported thereon. Unfortunately, I can't help you with this but if possible ask a friend if you can get outputs audio headphones and test mic ports.
  It will be interesting to know if you will be able to use the headset.

  Please post comments.

• Satellite U400-17Y - Bluetooth does not work after upgrade to win 10

  Hello

  I have improved my Windows7 laptop at 10 now. While upgrading to windows 10 he messaged device RFCOMM Bluetooth may not work with Windows 10. So now, my laptop Bluetooth not working do not. Opening of Bluetooth, it shows "Error-ECCentre-1.exe - Application Error (Oxc000007b)". Currently installed Bluetooth Stack is - v8.00.12 (T).
  My Toshiba laptop is Satellite U400-17Y.
  Kindly help please as soon as possible.

  Concerning

  Hello

  I have improved my Windows7 laptop at 10 now. While upgrading to windows 10 he messaged device RFCOMM Bluetooth may not work with Windows 10. So now, my laptop Bluetooth not working do not. Opening of Bluetooth, it shows "error-ECCentre-1.exe - Application Error (Oxc000007b)". Currently installed Bluetooth Stack is - v8.00.12 (T).
  My Toshiba laptop is Satellite U400-17Y.
  Kindly help please as soon as possible.

  Concerning

• Touchpad does not work after upgrade to Windows 8

  Hello

  I have just upgraded to Windows 8 with my HP Pavilion G6, and since then my Touch Pad stop working.

  Although the scrollbar on the right to work, but the work of the stop scrolling 2 fingers. Pls what can I do?

  oyedepo1,

  If you need drivers from the drivers from your computer's Web pages:

  Install the software and drivers from the HP site

  Driver for the TouchPad, if you need a new, is in the category

  Software-Solutions > > driver - keyboard, mouse and input devices

  See this file for more information:

  Difficult Touchpad / ClickPad

  Display brilliant tips

  Click on the star of congratulations !

  It's a nice way of saying 'Thank you' for help.

  Although I strive to reflect best practices of HP, I do not work for HP.