Satellite L955-100 - HARD drive crash / no recovery disk

Hi all

I think I have a huge problem, so I would like your advice.
Yesterday, my HARD drive crashed and a noise 'click of death '.

My warranty has already expired, and of course I did not the recovery discs...

I know that it was stupid to forget something, but even if I would like to ask you if you have another solution to my problem.

Already, I thought about buying a new HARD drive, but then my problem is still not having access to my Windows 8 (which was on the recovery partition).

Thanks in advance,

Michel

In my opinion, you should simply replace the HARD drive and need to use the recovery disk that you could order at Arvato Services
The disc isn't expensive; round about 30

Maybe you want to increase the performance of the computer laptop buying an SSD?
The SSD is a bit more expensive that a common SATA HDD, but believe me: it will significantly increase the performance of the laptop

Tags: Toshiba

Similar Questions

  • HP Pavilion p6290d: change to smaller capacity desktop hard drive using the recovery disks

    Currently my hard drive (750 GB) is having a problem. I have a spare hard drive (500 GB), I can replace the 750Go with the 500 GB hard drive using the recovery disks that I created when I got the pc?

    Hello:

    All I can say is that you have nothing to lose to give a try.

    500 GB could be sufficient to allow the recovery discs, you did to work.

  • Satellite A135: Vista will not start after replacing HARD drive using the recovery disk

    Toshiba Satellite A135-s7403 HARD drive failed, I have replaced the 80 GB with a WD Scorpio blue 250 GB hitachi. When I try to restore with recovery disk came with the laptop, it passes through two discs 1 and 2 and starts with the start-up of windows for the first time and then runs to the greenish with the spinner blue screen please wait... thne black screens for a second or 2 and then back to spinner, please wait and then it appears the box "installation of windows could not configure windows to run on hardware. This computer' only option is to click OK.

    Where to click ok, you get an another msg that says "windows could not complete the installation, install reinstall windows. I tried like 50 times now. Startup Repair indicates the root = failure cause while the installation program is underway. I know that my drive are good, as I adjusted used then about a month when I upgraded the memory because the original memory 512 MB was not enough o well running vista.

    Hello
    To be honest I n don't know what the problem is there but can you get the original installation disc of Microsoft and try to install the OS, just to see if the OS installation will complete successfully?

  • Satellite C660-1HP - hard drive crashed in 2 days

    I bought a Toshiba laptop(C660-1CV) to a local dealer just before two days. I had loaded VMware with couple of VMs and other important software.

    Despite my company insisting lenevo I went for Toshiba because I trust the brand and I had a real experience with Toshiba. Today morning after two days of buying laptop, the hard drive crashed and I got a black screen with no guest OS, nothing. My dealer said that he cannot do what I have to consider service of Al Futtiam centre. The hard drive just re-connected service center guys and it didn't work, he was immediately made a statement that the hard drive needs to be replaced and it will be another 4 to 5 days. He said to take a backup of your data, I have to pay 99 AED. Isn't it strange? My own laptop which is just 2 days has crashed and I have to pay to get my data. The technical guy has no other troubleshooting procedures except reconnect the hard drive.

    I care about her climbing at a correct level in Toshiba. If anyone has contacts in the region of the UNITED Arab Emirates forward to me.

    Hi pmavani,

    I'm sorry to hear that this HARD drive died after 2 days that are not normally but these things can happen, especially with the HARD drive, it is a mechanical part. But the don t worry that this case is covered by the warranty in order to obtain free of charge a new HDD to an authorized service and the guy said that it takes 4 or 5 days. It s ok for the laptop can be fixed within a week.

    > He says to take a backup of your data, I have to pay 99 AED. Isn't it strange?
    No, that s not quite strange. Backup doesn t warranty coverage, you should do it yourself. Which is the reason why you must install and configure the backup software before doing anything.

  • Satellite M50-226 - HARD drive crashed and I need a new

    Hello

    the 100 GB HDD in my Toshiba Satellite M 50-226 has crashed and I need a new. Can someone tell me if I need a SATA IDE oder?

    SN: 26234084 K

    Best regards
    Harry

    Hello

    According to this document:

    http://cdgenp01.CSD.Toshiba.com/content/product/pdf_files/detailed_specs/satellite_M50-S5181TD.PDF

    * Hard drive *.

    Choice of: 40 GB (5400 RPM), 60 GB (5400 RPM), 80 GB
    (5400 RPM), or 100 GB (5400 RPM); * Hard Enhanced IDE (ATA-6) *.
    hard drive; height 9.5 mm; removable user

    So it seems, you need Ide, one

  • Satellite Pro C660-1LR - new HARD drive but no recovery disk

    I need help for my son who is the Satellite Pro C660 1LR laptop.

    In this portable hard drive is completely dead, I have not created a disk of recovery for this system of portable computers.
    I bought a new hard drive that is installed... However, as you guessed it I have no access to reinstall an OS, this laptop works on windows 7.

    I'm not really tech savvy so if someone can advise me please do explain to the fool proof format! I try to avoid having to buy something expensive.

    > I'm trying to avoid having to buy something expensive.
    Problem is that you don't have many options in this regard.
    If you want to have the factory again settings you must install recovery disc. You can order on https://backupmedia.toshiba.eu/landing.aspx of course is not free, but, in my opinion, without a doubt the best solution.

    You can buy the Microsoft installation disc and install the clean version. You must purchase a valid license for it.
    In this case, you must install all the necessary drivers, tools and utilities for more than one by one.

    Just in case you can get this installation of Microsoft and the free license you can save money.

    Believe me, the best solution is the original recovery disk command.

  • Re: Satellite U400-11 q with Vista has new HARD drive but no recovery disk

    Hello

    Before starting a very important message: I do not usually work with pc... :-) At my work we have an IT Department for our PC :-))

    However, now I have to work privately with a PC / laptop and I need help: I'm sitting in front of a Toshiba Satellite U400-11 q with a HARD drive completely newly formatted and unfortunately WITHOUT recovery CD or DVD!

    So far I managed to format the new HARD drive and put a Windows Vista Home Basic (OEM software) from my old pc on this notebook. However, nothing works again (I want to get into the Internet, etc.).

    So, I now have to put on all the involved drivers as well as drivers TOSHIBA original, right?

    How can I do this? What drivers to I need? Do I have to download all the drivers concerned (total 113) one by one on the Web from Toshiba site?

    ANY help is appreciated as I see myself spend all night in front of the PC...

    Thank you
    M

    For the benefit of mobile work, you need to install all the necessary drivers and tools and utilities.
    Each of them you can find on Toshiba download page under http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

    Any substance must be installed according to installation order. Here it is:
    Windows Vista SP1
    Chipset Intel module
    Intel Robson (Intel iMSM Driver)
    Intel Crestline-GM / UMA Driver
    or
    AMD M82XT /M86 driver
    Audio driver Conexant CX20561
    Driver LAN Marvell 8040/8055
    Synaptics Touch Pad Driver
    Conexant Modem driver
    Wireless LAN driver
    Chicony camera software
    Bluetooth Stack for Windows by Toshiba
    CIR Port driver
    TOSHIBA Value Added Package
    TOSHIBA hardware configuration utility
    TOSHIBA supervisor password
    TOSHIBA SD Memory utilities
    AuthenTec AES1610 fingerprint utility
    TOSHIBA ConfigFree
    TOSHIBA Assist
    TOSHIBA Speech System
    CD/DVD Drive Acoustic Silencer
    Toshiba HDD Protection
    TOSHIBA face recognition
    TOSHIBA TRS driver
    Broadcom V2.14.4.0
    HDMI Control Manager
    ProtonPack for Vista

    Install all the stuff on this list. If there is something missing just continue with the next.

    By the way: this machine works perfectly with Win7 32-bit so I highly recommend you to use Win7 instead of Vista.

  • RAM and the satellite L20-100 HARD drive

    Hello!

    I have an old Satellite L20-100 and it has a few problems with the HARD disk. I want to buy a replacement (new HARD drive) so I need to know what are the types of FDI in L20 - 100 discs...

    In addition, what type of DDR2 RAM I should buy to install in this laptop?

    Don't want to buy a fake, because if I do, it would be very difficult to sell...

    Please, help :)
    Thank you.

    Post edited by: in_silent

    Hello

    I agree with Akuma L20 supports a SATA controller and you need and 2.5 SATA HDD.
    Usually it s no matter which manufacturer is all 2.5 SATA hard drives must be compatible

    With regard to the 48-bit LBA:
    As far as I know that this could be just a problem with HDD IDE (P - ATA). SATA HDD should not be affected. So, theoretically, you could upgrade the HARD disk using larger than 128 GB.

    Regarding the upgrade of memory:
    http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=20683&ft=m&St=3

    You need DDR2 533 MHz (PC2-4200) 200 - PIN SODIMM and you can use 2 x 1 GB RAM

  • Re: Satellite P300 - replacement HARD drive with no recovery discs

    Hi all

    I came to the conclusion that my HARD drive has failed. (PXE-E61error) now seeks to replace.

    Unfortunately I didn't create a recovery CD, and even if I did, my windows (label) key is unreadable.

    He comes, if I replace the HARD drive, to buy a new copy of windows, can I simply start from the CD, install windows on the new HARD disk, and then install the drivers from the Web from Toshiba site or what I need to buy recovery CD?

    Model - PSPCCA-05Y01Y

    I had to spend an hour or so scouring Google and the forum, but to no avail.

    Thanking you in advance for your help.

    Yes, you can do it. Install the version of Windows. All the drivers, tools and utilities that you can download from the Toshiba support page - http://www.mytoshiba.com.au/support/download

    This machine has been delivered with Vista, but I recommend you to install Win7. It works perfectly and very stable on this machine.

  • My hard drive crashed, Gateway Recovery Management (V8.3.2)

    I have replaced my failing hard drive, inserted the 1st recovery disk. I get some blury gray and black line about 1/2 in the lower part of the window. After awhile we open the window of recovery management. Howevery it allows me, but an EXIT option and I cannot go further in the recovery of windows 7 on this computer.

    Can anyone help guide me to a solution. Or do I have to buy a new Windows 7?

    Hello everyone. I am pleased to say that the recovery disk is fine. I installed another hard drive in the computer. I ran both and tried running the recovery disc that I've tried for the past few days to start, still wouldn't start. So I unplugged that one and run the recovery disc, he went right to work, installation of Windows and the information on the bridge.

    I guess that somewhere along the line I corrupted the two old hard drives. Maybe when I tried using BootCD of Hiten to try to format hard disks and start over. But it was after I had so much trouble with them. So, needless to say. I'll stay away from this for sure boot disk. Not to mention a lot of programs on it say that they would not work, or have nothing in them...

    Of course, I'll keep the links you have all provided for future reference. Now I guess I should open a new topic if I can't find how to check the material to see if something is missing, or bad. I also now if there's a way to check my external hard drives to see if him are corrupted somehow. Also is there a way to at least restore the latest hard drive and or check these two drives into trouble.

    Thanks again to you all for putting up with me and my nonsense.

  • Samsung hard drive crash data recovery

    I recently had to replace my hard drive on my desktop Dell Inspiron 503 S.  How can I resurrect the data of the
    Fried disc.  In my view, that the bad drive has a problem with the circuit board, since I am unable to do anything with it.  Thank you for your help.

    Rgds,

    Tony

    If the disk target hard is physically damaged as you say, you cannot receive it yourself. You would need to send it to a professional data recovery company. I use savers by car, but there are others. General prices run from $500USD on-site. Investors recovered all disk data on a portable player that failed for one of my clients, and it cost $2 700. He thought that it was worth the money; only you know what's worth your data. I understand that some insurance companies now cover fresh data recovery so check with yours.

    Drive savers - http://www.drivesavers.com MS - MVP - Elephant Boy computers - Don ' t Panic!

  • Satellite S1800-100 HARD drive is not detected

    Hello

    I just got an old laptop, the guy who gave me think it had been deleted and the boot sector had to reformat and reload.

    However, I booted up in windows 2 k consisting of disc to see that there is no HARD drive detected.
    Then I went into the BIOS to see if it was detected he find that it is not.

    I just want to check that I have reason to think that the HARD drive is actually dead?

    Hello

    It is possible that the HARD drive is faulty, but there may also be placed on the motherboard defective HARD disk controller. If possible, try to get another HARD drive and you will see if the new HARD drive is recognized correctly.

  • Pavilion 4070 - us: new hard drive for the recovery disks do not work! Help!

    Hi - the hard drive on my Pavilion 4070 - crashed us, so I bought a replacement - a Samsung SSD 850 EVO, 256GB drive.  The problem is that I can't seem to get the recovery disks to work, and neither Microsoft nor HP is willing to help me.  Of course, Microsoft tells me they don't give me any help for Windows7 OEM versions and HP said that my product is no longer supported so they do not help me.  This is ridiculous - I own a legal copy of Windows 7 and I can't get any help from the company who sold me the computer?

    What happens when I go through the process of installation with the recovery discs, is that instead of the Windows installation continue as it is supposed to, I have "no boot device - insert boot disk and press any key any."  I'm desperate, I tried two different options - one was the minimum image recovery, the other was a factory restore.  Nothing seems to work. What can I do?   Moreover, the original hard drive is not * completely * dead - I can still access most of the data on it.

    Hello:

    Yes... It works fine for me.

    Here's the source Web page.  Select the download link of W7 Home Premium x 64 from there...

    http://forums.mydigitallife.info/threads/14709-Windows-7-Digital-River-direct-links-multiple-languages-x86-amp-x64/page58?p=469389 & viewfull = 1 #post469389

  • Broken HARD drive and no recovery disk

    Hello, everyone!

    My husband bought a new laptop a few months before and the fact that US aircraft not only any what rescue DVD, we na not create a restore disc, understand us, that we had a lot of time... Except that yesterday one of the dogs was caught in the power cord, and the laptop fell on the floor. Of course it wouldn't restart and the BIOS would not recognize the HARD drive.

    Using an adapter, I was able to connect it to my own laptop and all data and files are displayed. My question is, being able to access my own computer HARD drive, I can create a disc of recovery there and how? Cause when I select this function on my computer, it does not give me the ability to choose which drive I want to create the disk, it assumes I want to do it from my C: drive.

    Thanks in advance.

    > My question is, being able to access my own computer HARD drive, I can create a disc of recovery there and how?
    As far as I know that something like this will not work. For recovery, multimedia creation, you need to use preinstalled Toshiba recovery media creator tool. Saved on the HARD drive recovery image is marked with so-called markers and this tool can find the exact position of the image stored on the HARD drive. Please note that it works under normal circumstances. When your HARD drive is connected as external, this tool can not find it and recovery media is not possible.

    In my opinion, you have a problem with your machine. You know if the HARD drive is not properly recognized that I'm afraid that your laptop has a serious hardware problem and it must be checked by the Toshiba service provider.

    I mean, you can have a recovery media, but it is useless if the HARD drive is not recognized by the system.

  • My G62-340US, I just had to replace the hard drive. My recovery disks appear to be compromised. Help

    On my G62-340US, I just had to replace the hard drive. I did 4 recovery disks when it was new. Now restore the recovery discs 3 ran, but will not be the 4th disk. The 4th information located anywhere without having to buy a new set? Where can I buy a single disc?

    Hello:

    As far as I know, you would have to buy a whole series of new.

    But, if you can read all 25 characters of the product key of W7 on the bottom of your laptop, I have a free solution to install a simplified version of W7 using the code the product key on your laptop.

    Here's how...

    Download the ISO file from W7 Home Premium 64 bit from the Microsoft link below.

    http://MSFT.digitalrivercontent.NET/win/X17-58997.ISO 2147483647 English Windows 7 Home Premium x 64 X 17 - 58997.iso

    Make sure that you got the file from xx GB 3. integers download, in rare circumstances, you get a full notification of download, but you do not receive the entire file to download.

    After you download the ISO file, you can burn it to a DVD using the ISO file burn option on your DVD burning program, or you can use this tool to transfer the ISO to a flash USB DVD or 4 GB drive.

    The tool also performs the bootable media.

    http://www.microsoftstore.com/store/msusa/HTML/pbPage.Help_Win7_usbdvd_dwnTool

    Then go to the care of your laptop and driver page for available software and drivers that you need.

    http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&DLC=en&docName=c02497777&LC=en&product=4308554

Maybe you are looking for

  • How a user find the Thunderbird download page

    Where is the link to Thunderbird on your main site? https://www.Mozilla.org/en-us/

  • Upgrade memory for HP Pavilion dv5215US

    I currently have 1 GB DDR PC2700 (non - ECC) memory (2x512MB modules) in a portable old dv5215us.  Just updated to Windows 7 OS and the need to pass the limit of 2 GB of RAM for best performance.  Can I use DDR PC3200 memory (non - ECC)?   Seen previ

  • 5548, 7048 - PowerConnect backup SNMP configuration

    Hello I Powerconnect 5548 and 7480 switches and I would like to know if it is possible to backup with TFTP and SNMP commands configuration files, like I do with my cisco switches? Thank you.

  • BB10 Push notification: PushPayLoad

    I'm developing a c# application that can send a push notification to BB10 devices using Blackberry Internet Service, I found a code it works well, however I don't know how to add custom to the push, data data that can be access with the push as pushP

  • Problem with load LOV value reset

    12.1.3 ADFI am facing a problem with load LOV set to reset.I have a page in waterfall surrounded by af LOV: PanelFormLayout. Also do some validation on the data entered by the user when clicked on submit. If the validation fails, an alert will appear