Satellite M100-164 display does not illuminate after hibernation

Similar Questions

• The Satellite A200 display does not illuminate after being idle for 15 minutes!

  Hello!

  I just bought a Satellite A200 1 - AX PSA6 and install Windows XP SP2 + upgrade of bios for winxp.
  After 15 minutes of unactivirty (no not pressing the keys or moving the mouse), I set in power options in Control Panel - what must power OFF display.
  After this time display is switched off (black)!

  But I can't wake up my laptop!
  I'm press any key or move the mouse, but the screen is always black!
  But laptop works!
  I can ping and then by network or remote access connection.

  One way to solve this problem:
  Laptop open and close!
  A200 - "standby mode" and wake up with swithches on screen...

  Hello

  It seems that Windows XP Home edition does not work perfectly on the new laptops designed Vista. Before you live your laptop try to change profile settings (extended battery) power and test the parameters of this profile.
  Tomorrow I'll try to install Windows XP Home on my A200 and I'm really interesting if I even notice.

• Satellite L30-PSL33 does not illuminate after hibernation

  Hello

  as I said in my previous post, I also have a problem with the Hibernate. The thing is that when I leave to transform a hibernation on this more later sometimes not loading Windows - the load bar coming to an end and then it stops 'thought' so I have to stop it and start it...

  The operating system is Win Xp Pro SP2 on Toshiba Satellite L30-PSL33. For example, it loads Windows hibernation 2 or 3 times, and then after that it will not load the operating system.

  Please give me an advice how to fix this...

  Thank you

  It's not easy to say what s may be wrong because like you say so this problem happens sometimes and that's why he of not easy to reproduce this error.

  I m an owner of a Sat L30. I use Vista on my L30 and received no similar problem.
  I talked to some people, and also read on some sites Internet computer that this error could be related software.
  One question; what OS came preinstalled on this notebook; XP or Vista?

  Maybe you have updated the operating system on your laptop to the last State.
  Please also check if the third-party programs 3rd n t assigned the wrong operating system.

• Satellite Pro A100: Screen does not return after hibernation

  The laptop went to Hibernate, but would not re - awaken.
  tried to disable following the manual, but the screen is now definitely blank, any suggestions?

  Hello

  The update of the graphics driver is not bad idea but Stefan, how should Christian update the graphics driver if it s not able turn on the laptop?

  I suggest putting the laptop turned off (press the power button for about 4 seconds) and unplug the AC adapter and remove the battery for a while.
  After several time (10-30 min), you can try to put the battery in the laptop and connect the power adapter. Then try to start the laptop.
  If it helps, then you could try updating the graphics card driver.

  In addition if the new BIOS version is available if you could also update it. But don't forget to use the good BIOS and the correct procedure for updating the BIOS.

  Good luck Christian

  Good bye

• Satellite M30-801 - display will not work after hibernation

  Hello everyone,

  I hope that you will help me with this problem. I have a Toshiba Satellite M30-801 and my warranty is over.

  A few days ago my computer was a few hours of standby. When I rebooted the system, the screen has continued on a black background. No images.
  I am connected to an external monitor to check the video card and this test has been authorized. Now, I'm writing this letters using my laptop connected to the external monitor.
  Also, I noticed that there is blacklight on the screen.

  I had checked the power management for the controllers of USB bus on the control panel.
  I downloaded and installed the latest update of the bios.
  But the screen remains black.
  Could you help me? any ideas?
  Thank you and best regards,

  Stalker99ES

  When you start your laptop without external display can you see anything?
  When you use external monitor that happen when you try to change the display mode by using the FN + F5 key combination?

• Satellite L30-10 s - does not start after RAM uprade

  Hello

  I've updated my 512 MB of RAM with one of my dads old 512 MB RAM from another laptop upgrade to a 1 GB. It shows the black screen saying Windows Vista startup repair. Then I have the choice of the common eider "Launch Windows Startup Repair" or "start windows normally". What we I choose I get a popup saying "Windows Vista startup repair failed launch" and then theres only 'Ok' or 'X' and eider there click you on it shuts the laptop! Then I start again and it does exactly the same thing for the Common Eider option grey-headed!

  I don't have any idea what to do now, and the only choice is to bring a professional and pay for repair which I did not have money to make. I can to fix on my own? I know a few people saying updating the BIOS but how can I if the display does not illuminate.

  _Before you leave a response, I want to clarify that I removed the 512 MB of RAM on the other laptop and the same thing happens. _ there is nothing I can do! :(:(

  Help, please

  Ryan

  Hello!

  I think that your installation of Windows Vista broke down because the RAM did not work properly in your laptop.
  You should only use manufacturing even modules with the same specifications.

  However, have you tried the Vista repair option with the original of the RAM?
  If it doesn t work I think you need to reinstall Windows Vista with the installation disc. :(

  Good bye

• Satellite x 200: Webcam does not work after I have connection on Microsoft messenger

  Hello everyone

  I have a Satellite x 200 SLI and for some reason any webcam does not work after I login on messenger... Even when I disable messenger and even disable internet... it still does not. Only when I restart the operating system.

  Anyone has an idea on how to solve this problem?
  Already did the updates but still, anyway.

  Hi Gabriel

  Check it out!
  I noticed several discussions on this issue, it would be really interesting to know if the SP1 fixes this annoying problem

  Your comments would be appreciated

• Satellite A300D-15B - Webcam does not work after upgrade to Windows 7

  My webcam does not work after upgrade to Windows 7. I installed the drivers but still having no luck

  Hey Buddy,

  What does it mean exactly when you say he won t work?
  You get an error message or only a black image? What model of laptop you have and that you use the Toshiba Windows 7 upgrade kit or a disc of Microsoft?

  At this moment I can only offers to install latest driver of the webcam of the official website of Toshiba. Make sure that this driver is released for Windows 7 and not Vista.

• I have the lS PowerShot SX30 after recharging the battery, the display does not illuminate?

  Hello, I hope someone can help me! I have not used my camera in several months so I recharged the battery and for some reason that the screen does not light. I'll be honest, I'm a little bit challenged with this device. Can someone help me please? Thank you, Vickie

  I have two batteries, so I just put in the other battery and it works now! I also put the other battery I thought I had reloaded on charger. Thank you for your response. Have a blessed day.

• Satellite U920T - function keys does not work after update to Win 10

  Hello, good morning / evening...

  I use (U920T satellite) and recently updated my Windows 10 Tablet
  but after that, the function keys, volume, brightness, key FN and even the backlight does not work anymore!

  I tried to restore the system and update the driver software but nothing has worked...

  I use these keyboard shortcuts all the time and now it's really hard without them!

  What is the problem? What should I do?

  The problem is that U920T satellite is not listed as Win 10 support unit and, therefore, drivers earn 10 Toshiba and software that controls the FN keys is not released.
  But as far as I know using the FN keys, system of Toshiba and the Support of Flash Card Utility driver must be installed.

  For all Toshiba units win 10 supported, the drivers can be downloaded from this page:
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

  Maybe you can try the drivers released for other models of portable Win 10 supported...
  I'm not sure if the software will be compatible with your model of U920T, but its certainly worth a try...

• Satellite A65 freezes and does not answer after adding RAM

  Gents,

  My laptop Satellite A-65 has been upgraded to 512 MB RAM 1024 RAM. He acknowledged additional without any problem memory (as she should be determined according to the manual).

  But unfortunately after 1 day it started suddenly stops, images on the screen freezes, laptop does not at all - only reset (press and hold the power button / stop) can help. laptop computer sometimes is able to work 2-3 hours, but still stops.

  Cover of place of memory is rather hot, fan very often work uninterruptibly. so I can't decide if the problem is in the new map memory or not enough cooling or maybe by changing the version of BIOS (or BIOS setttings) and could be memory saturates and erases itself properly (last note was found on the forumes).

  Experts, to help find the exact reason especcially if you had the same problem.

  Hello

  I m not an expert, but I recommend you remove the new memory module and run the laptop only with the standard memory module.
  If the laptop does not cling and will not freeze then it s a very clear case for me.

  Either the second module is not compatible or defective.
  In my opinion, you need to use brand modules such as Kingston for example. The quality is much better as a module without a name.
  Use additional modules recommended by Toshiba

• Satellite L50-A-160 does not start after the Bios Update

  Hi, first of all, this is first post.

  I have 2 satellite L50-A-160 with bios 1.1

  Problem: seems to go to sleep after a few minutes, even working on them (even with both)

  So, I found an updated version 1.9, downloaded and running on one of the laptops. the biosupdate tool found matching the BIOS and a race.
  In the middle of flashing, he fell asleep. turned on and not start. What can I do? Recovery options? I guess the same thing will happen with the other too...

  What is the problem with these computers?

  Besides; very poor battery, always shows 0% available and not charging...
  Does anyone have a solution?

  Best regards
  -always in the hope.
  GT

  Have you tried to change in Power Options?

  See screenshot and try to change the ones I marked (it can refresh the settings, just change the values) and see if this solves the problem.

  

  and for the other laptop with no boot, a laptop sleep by updating the bios will surely mess it.

  what I don't understand is why your sleep laptop BIOS update, as far as I know the sleep settings is active then on windows (since this is controlled by windows)
  He does not sleep while in the BIOS you leave 1 year, sleep settings active only after loading windows.

  have you tried to check the time of processor for your laptop? Maybe its overheating causing auto-off

• Satellite 1110: Secondary display does not work

  I have a satellite 1110
  Connection of a monitor second - does not work
  The settings are correct in what, move your mouse off the screen of the laptop and he enters the secondary monitor - but this monitor is empty
  Tried all the normal things - control work? Yes etc.
  I'm running XP Professional could be corrupted or is it more likely to do with my laptop

  Please someone help - new monitor for Christmas - just can't make it work

  Thank you

  Hello Nick

  According to your description, you can't write that the second display doesn t work. Of course, you have activated the option called extend my Windows desktop on this monitor. In this case, you can remove all windows laptop for external monitor screen.

  If you work with more different windows on this way, your work will be more comfortable. I assume that you do want this and it will be interesting to know how you want to use the secondary display:
  -secondary display only
  -but both with the same point of view?

  Remove the scope option and use the FN + F5 key combination and choose display to use.

  Good bye

• Satellite A300-15 a does not start after the installation of the alcohol program

  Hello...

  Satellite A300-15 has, I bought yesterday and after completing the installation of Vista, I tried to install "Alcohol" but my judgment of the laptop and now I'm not able to boot up the laptop.
  It does not start in any mode.

  I forgot to make recovery disks. I think that alcohol is not compatible with Vista. Error I get is below.

  Can someone tell me the solution?
  Please help urgent

  "A problem has been detected and Windows has shut down to prevent damage to your computer.
  If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps: blah blah... "

  Looks like a problem familiar to me, as I had the same one with the Daemon tools. After installing these tools, I couldn't start my Windows XP. I guess that it somehow mixed upwards of some drivers or registry entries, but not sure about that.

  OK, you can try to uninstall tool first start Vista in safe mode (press F8 before Windows starts upward).
  You should then be able to enter in Vista without problem.

• Satellite M200 FN function does not work after the downgrade to XP

  Hello
  Recently, I have donwgraded my Vista to XP on Satellite M200 home but the Fn works for mute, brightness etc, don't work.
  All solutions?

  Thank you.

  Hello

  First of all, I must say that the Satellite M200 cannot be a European model for Toshiba laptop.
  I didn t find any Toshiba XP drivers on the European driver from Toshiba website.

  Eventually he s Toshiba U.S. laptop series or model Australian for Toshiba laptop.

  However, I think the buttons FN don t work on Win XP because the correct driver is missing and not installed (modules, etc) or the BIOS does not support the XP completely.

  I noticed a similar problem on a laptop A200. After installation of XP the FN buttons didn't work, but after update of the version of the BIOS XP I get the FN feature

  If both is possible
  I put t know if an update of the BIOS especially for Win XP is available but you can check it out, if it is not available, you will need to use the laptop without the FN buttons feature s.

  Good bye