Satellite M100-165: connection to the LAN operarte correctly

I have a Satellite M100-165 for about 2 years with the original Setup (win XP etc) and I make all updates.
The problem is that the connection to the local network is working properly from the beginning.

I can connect only if I set the NIC property "link speed & Duplex = 10 Mbps Full Duplex", but on some LANs operate at all.
I appreciate any response.

Thank you

I'm a bit confused now. What you mean with connection to the LAN working correctly from the beginning? What is started for you?
I can't believe that you declare on that now, two years later. Have you already tried to install recovery image and test it with the factory settings?

Tags: Toshiba

Similar Questions

  • Satellite M100-165 - grain on the display effect

    Hello.

    I have a problem with my laptop... I see on my screen something like I might describe as an effect of 'grain' on my screen.
    I found some discussions that other people have the same problem but no-Toshiba laptop with X 1600.

    I could say that I have the same problem. When I'm on the site, for example, which has a lot of gray color, I see a grain effect (not all of a pixel is in the same color). They are different, but not much... but I can see the difference. Gray isn't gray everywhere. Other colors have the same effect.

    Is - that any solution to this? .... Maybe it's a problem of driver or something.
    I think ATI or someone should look at this problem... or explain what the "grain" effect takes place.

    Help, please.
    B.Sz

    Hello

    I put t know if this will help but I hope last updated BIOS may be the solution for this. The similar question was noticed on Satellite A100.

    Check it please this subject http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=14718

    Is the situation is similar on your laptop?

  • Realtek HD on Satellite M100-165 does not work

    I have a Satellite M100-165 and from the moment where I bought it I have never effects Manager realtek hd sound.
    Lately my windows xp that they updated and the effects Manager appear in the control panel.

    But after an another update of the effect window manager disappear

    Hello

    Hmmm... only the TOSHIBA Virtual Sound is known to me, and certainly, this tool is installed on the image of Toshiba. The image of the BONE was delivered on the Toshiba Recovery CD.

    As you say, the laptop supports a smart Audio HD Realtek ALC 861 but only the Realtek driver was installed and not the extra utility.
    Maybe the Realtek provides this tool that could be installed and more? Who knows... but I'm sure... the Realtek HD sound effect Manager is not a part of the image!

    By the way; Several weeks ago, I noticed an update of Microsoft, who has had a bad influence on the chip realtek audio.
    2 days after Microsoft released a patch for this update. Perhaps it has something to do with your problem...

  • Satellite M100-165: energy saver indicates the lifetime of battery only in percentage

    On my M100-165, when using the laptop with the battery, the Toshiba Power Saver does not show the battery time remaining... only the percentage of the battery power.

    How can I change this?

    Hello

    On my laptop, Toshiba power Saver saver also displays time only with percent.
    But I unplugged the laptop AC adapter and the small power supply icon appears in the taskbar. Then I wait until the power goes up to 97-98% and go with my cursor over the icon. The time is then displayed in percent, the hours and minutes.

  • Satellite M100-165 - new 320 HDD recognised as 132GB

    Hello

    I try to install a western digital (wd3200 bevt) HARD drive on a Satellite M100-165, with Windows XP SP 3
    But the HARD drive recognized only as 132 GB internal USB connected.
    I have a Lacie external USB HDD 320 GB, that work properly. Any idea?
    Thanx.

    Hello

    I think that your laptop has a limitation of LBA 28 bits, then it will be only 132GB recognized. You can learn more about this here: http://www.48bitlba.com/

    What can you do now? Nothing. You can buy a 120 GB HARD drive.

    You should also check if your external enclosure supports 320GB. Not every external HARD disk supports each size of HARD drive.

    Welcome them

  • Satellite M100-165 cannot stop - lights up immediately

    Hi all!

    Here's my problem: whenever I have shutdown or Hibernate my Satellite M100-165, it will light within 5 seconds. Standby does not either - instead of normal going in standby mode (power LED turn orange) it shuts down completely and has the force of will to 5 seconds upwards again and freeze. The computer only lights when plugged into power alternative, with or without a network cable. Wake-on-LAN is disabled. No other event trail is accessible from the menu of the BIOS Setup.

    I tried the system restore to a date before the problem was uccured, I've updated the BIOS, uninstalled and reinstalled Toshiba Power Saver utility, set closing the lid to take no action, scanned with HijackThis and found no suspicious processes.

    The problem started shortly after I installed Motorola Phone Tools (i.e., a driver of USB modem for my mobile phone). I don't know if that could be related but uninstalled/reinstalled the software nothing works.

    Any suggestions are welcome. Thank you.

    Hello

    This very strange noise
    Have you tried to recover the operating system with the Toshiba Recovery CD?
    If this isn't the case, I recommend trying this.

  • Satellite M100-165: screen dithering also after BIOS update

    I bought a Satellite M100-165 PSMA1E-2 days ago and I have the same problem as toshiba it described here:
    http://support.toshiba-tro.de/KB0/TSB6901K20002R01.htm

    I updated the bios to version 2.10 and the latest ATI drivers, but the promblem is still there.
    Is there anything I can do to solve this problem, because the dithering promblem is really annoying!

    P.S. The LCD Panel seems to be a SEC5643

    Hi guys

    If you have read the topic about this issue with the Satellite A100, you will see that many user were frustrated but right at the last update of the available BIOS. It cannot happen overnight and in my opinion, you must be patient and hope that the good BIOS update will be available shortly.

  • Question about HDD temperature on Satellite M100-165

    My Hitachi 80 GB HDD on Satellite M100-165 is getting very hot. 50 - 55 c in general using Windows. And warmer that I see is 59.

    Is that normal values for M100?

    Hello

    How did you check this temperature? Did you use the 3rd party applications?
    To my knowledge, these applications don't provide a temperature exactly.

    Anyway, in my view the 55-60 ° C is not very hot for a HARD drive. You know that the temperature is dynamically the value and depends on how fast and time the HARD disk rotates.
    The HARD disk also turns when you use Notepad with General Windows applications and access the OS from the HARD drive.

    The temperature may also increase because the other parties such as the processor and graphics card produces heat. This temperature can increase the temperature of the HARD disk level.

    PS: The specifications are supported protection against overheating. If the temperature is too high the laptop will automatically stops.

  • Satellite M100-165 cannot stop - turns on automatically after a few seconds

    Hello!

    I have the problem of identical or very similar to those described in the threads:
    Link: [http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=15325]
    Link: [http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=109125]

    When I try to turn off my Satellite M100-165 ("shut down" in Windows or even by pressing the power button while I'm in BIOS) it lights up after a few seconds. It lights when it runs on batteries. She also doesn't appear when I press the button for 4 seconds.

    I tried to recover the system with the recovery CD (Windows XP Home). I also tried with Windows Vista. Always the same.

    In fact I have BIOS version 2.90 (updated from version 1.90, as far as I remember) but with an earlier version, the problem exists also.
    I think when I got the version of the BIOS before 1.90 this problem did not exist (but I don't remember this version number).

    Thank you for any suggestions.

    Hello

    It's a very unusual question and, for me, there is not just some explanation. It will be interesting to know what Toshiba experts say on this subject. Make a call and let us know what they say.

    The strange is that the same thing will happen with two different operating systems. I can't say for sure why this happens, but your laptop is a bit confusing and of course change the shutdown with restart. If it is result of BIOS update service people should know about it.

  • My works wireless, but my connection to the LAN does not work?

    I have a Toshiba L305-S5917 laptop and my connection to the LAN does not at all, when I plug my CAT 5 cable into the slot not strikes is the lights. IM able to use my wireless works fine. All this happened when my laptop crashed due to a virus. I reloaded all windows from XP to Windows 7 and also bought Numbus disk driver and recovery for my model laptop and still no connection to the LAN... pls help.

    Hello

    Sorry I'm not quite clear about the situation.

    You posted on the Vista Forum; you have loaded Win XP and you running Windows 7?

    If the computer is currently running on Windows 7, newspaper to the support site for Toshiba laptop, download Windows 7 drivers for the wireless network card and install them.

    In general.

    Check the Device Manager for the entry of valid card of the wire.

    http://www.ezlan.NET/Win7/net_dm.jpg

    If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

    ----------------------------------

    Try installing the latest drivers from the card manufacturer support page.

    Download the drivers and extract them to a folder of your choice.

    In Device Manager, right-click on the adapter.

    Click Update drivers and choose her browse my computer for drivers.

    Choose let me a list of choices, click on disk and point to the folder with the drivers.
    -------------------------------------

    Check network connections to make sure that you have a Local Area Connection icon/entry, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

    http://www.ezlan.NET/Win7/net_connection_tcp.jpg

    Connect you to the menu of the router from a work computer and make sure DHCP is on, and it is configured to assign IPs which can cover the number of computers that are connected (a bit more will be even better).

    Turn off the computer and the router, reset the router and the computer.

    Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

    On the State of intellectual property.

    TCP/IP and its variables usually look like this.

    Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

    Typical TCP/IP status looks like this.

    http://www.ezlan.NET/Win7/status-NIC.jpg

    Description is the data of the card making.

    Physical address
    is the MAC of the card number.

    The xx must be a number between 0 and 255 (all xx even number).

    YY should be between 0 and 255

    ZZ should be between 0 and 255 (zz all the same number.)

    The date of the lease must be valid at the present time.

    * Note 1.
    IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

    * Note 2 There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

    ------------------------

    Also, make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

    General example, http://www.ezlan.net/faq.html#trusted

    Please note that some 3rd party software firewall continue to block aspects of the Local traffic even it they are off (off) . If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

    Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

  • Satellite M100 - can not repair the 1394 connection & Wlan driver needed

    I installed XP Pro on my Satellite M100, due to being Home Basic, vista terrible.
    I installed all the drivers listed on the site of toshiba for the XP system.

    When I try to repair the 1394 connection I get message saying to error failed to query TCP/IP.

    Can someone help me with this problem?

    Also the wireless for this system driver does not appear to be installed.

    Does anyone know where I could get it from?

    Thank you.

    Hello

    May I ask if you have installed the LAN driver?
    And if you have installed the network driver; have you tried to update the driver LAN?

    To be honest, I do not know why this error, but I wonder why repair you the 1394 connection.

    However, in my opinion the LAN driver should be updated and you should also check if the TCP/IP protocol is set to automatic.

    You can google a little how to change TCP/IP settings.

    By the way; The WLAN driver can be downloaded from the Toshiba driver page!

  • Satellite Pro U300 - how to go if connected to the LAN WiFi

    How can I change my laptop to the wireless router, when you connect to the internet LAN?
    My laptop is Toshiba Satellite U300 pro

    Post edited by: marto_noa

    Unplug the cable LAN and switch ON the WLan.
    Usually the laptop would use the LAN connection if LAN cable is connected and LAN is active.

  • Satellite M100-165 - for the LCD Panel response time

    Hello.

    Anyone know where I can find information on the reaction time of my LCD screen on my M100-165?

    Does anyone know what is the response time LCD m100-165 (or m100 series)?

    Thx for replies :)

    Hello

    The M100 series was delivered with a display type 200 WXGA 14.1 LTN141W1-L03-0.
    To my knowledge this display should support a response speed of 25ms.

  • Where is the second slot of RAM on Satellite M100-165?

    Hello

    Sorry in advance for my English :)

    I have Toshiba M100-165 (PSMA1E-01W00PG3) and you want to upgrade memory RAM. But I see just a free memory slot on the bottom of my laptop. According to the manual and specifications of the laptop, there should be two slots. Where is the other? There for you, and how can I access it?

    I will be grateful for the answer.

    You are right. There are two locations of memory, but only one is user expandable!
    In my view, the other is placed somewhere under the keyboard.

    But like I said it's only one scalable user. So, if you open the laptop to access the second slot, you will lose the warranty.
    It is therefore advisable to ask and ASP technician to upgrade memory on the second slot.

    Best regards

  • Satellite A110 - 159 hangs when it is connected to the LAN card

    Hi, can anyone help?
    Can I find somewhere the LAN card firmware update? When I connect to my laptop with a built-in LAN card cable it breaks down, if it s connected the wireless, everything is ok, no crashes.

    It only happens once, after reboot ok, until the next stop and wake up. It s annoying.

    Have you tried to reinstall the card LAN and LAN driver?
    What operating system do you use?

Maybe you are looking for