Satellite M100-165 - for the LCD Panel response time

Hello.

Anyone know where I can find information on the reaction time of my LCD screen on my M100-165?

Does anyone know what is the response time LCD m100-165 (or m100 series)?

Thx for replies :)

Hello

The M100 series was delivered with a display type 200 WXGA 14.1 LTN141W1-L03-0.
To my knowledge this display should support a response speed of 25ms.

Tags: Toshiba

Similar Questions

  • Satellite M100 - driver for the mass storage controller

    Help, please. I don't get the hat of message I have no driver for my mass storage controller. I downloaded and re-downloaded the drivers of Toshiba. Microsoft found nothing.
    It seems to be bus PCI 5, device 6, function 2.

    Can anyone help (in terms laymans terms please). It drives me crazy.

    Thank you

    Hi Tellgio,

    What Toshiba drivers you have reinstalled exactly? I'm pretty sure that you don't have installed all the drivers because you always have a yellow exclamation point in Device Manager
    In addition, it would be interesting to know what operating system is installed

    I also had a yellow exclamation on mass storage controller and in my case it was a missing card reader driver. If you need to install this driver on Toshiba official site:
    http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  • Satellite M100-165: connection to the LAN operarte correctly

    I have a Satellite M100-165 for about 2 years with the original Setup (win XP etc) and I make all updates.
    The problem is that the connection to the local network is working properly from the beginning.

    I can connect only if I set the NIC property "link speed & Duplex = 10 Mbps Full Duplex", but on some LANs operate at all.
    I appreciate any response.

    Thank you

    I'm a bit confused now. What you mean with connection to the LAN working correctly from the beginning? What is started for you?
    I can't believe that you declare on that now, two years later. Have you already tried to install recovery image and test it with the factory settings?

  • Satellite M100-165: screen dithering also after BIOS update

    I bought a Satellite M100-165 PSMA1E-2 days ago and I have the same problem as toshiba it described here:
    http://support.toshiba-tro.de/KB0/TSB6901K20002R01.htm

    I updated the bios to version 2.10 and the latest ATI drivers, but the promblem is still there.
    Is there anything I can do to solve this problem, because the dithering promblem is really annoying!

    P.S. The LCD Panel seems to be a SEC5643

    Hi guys

    If you have read the topic about this issue with the Satellite A100, you will see that many user were frustrated but right at the last update of the available BIOS. It cannot happen overnight and in my opinion, you must be patient and hope that the good BIOS update will be available shortly.

  • Realtek HD on Satellite M100-165 does not work

    I have a Satellite M100-165 and from the moment where I bought it I have never effects Manager realtek hd sound.
    Lately my windows xp that they updated and the effects Manager appear in the control panel.

    But after an another update of the effect window manager disappear

    Hello

    Hmmm... only the TOSHIBA Virtual Sound is known to me, and certainly, this tool is installed on the image of Toshiba. The image of the BONE was delivered on the Toshiba Recovery CD.

    As you say, the laptop supports a smart Audio HD Realtek ALC 861 but only the Realtek driver was installed and not the extra utility.
    Maybe the Realtek provides this tool that could be installed and more? Who knows... but I'm sure... the Realtek HD sound effect Manager is not a part of the image!

    By the way; Several weeks ago, I noticed an update of Microsoft, who has had a bad influence on the chip realtek audio.
    2 days after Microsoft released a patch for this update. Perhaps it has something to do with your problem...

  • Question about HDD temperature on Satellite M100-165

    My Hitachi 80 GB HDD on Satellite M100-165 is getting very hot. 50 - 55 c in general using Windows. And warmer that I see is 59.

    Is that normal values for M100?

    Hello

    How did you check this temperature? Did you use the 3rd party applications?
    To my knowledge, these applications don't provide a temperature exactly.

    Anyway, in my view the 55-60 ° C is not very hot for a HARD drive. You know that the temperature is dynamically the value and depends on how fast and time the HARD disk rotates.
    The HARD disk also turns when you use Notepad with General Windows applications and access the OS from the HARD drive.

    The temperature may also increase because the other parties such as the processor and graphics card produces heat. This temperature can increase the temperature of the HARD disk level.

    PS: The specifications are supported protection against overheating. If the temperature is too high the laptop will automatically stops.

  • Satellite M100-165 cannot stop - lights up immediately

    Hi all!

    Here's my problem: whenever I have shutdown or Hibernate my Satellite M100-165, it will light within 5 seconds. Standby does not either - instead of normal going in standby mode (power LED turn orange) it shuts down completely and has the force of will to 5 seconds upwards again and freeze. The computer only lights when plugged into power alternative, with or without a network cable. Wake-on-LAN is disabled. No other event trail is accessible from the menu of the BIOS Setup.

    I tried the system restore to a date before the problem was uccured, I've updated the BIOS, uninstalled and reinstalled Toshiba Power Saver utility, set closing the lid to take no action, scanned with HijackThis and found no suspicious processes.

    The problem started shortly after I installed Motorola Phone Tools (i.e., a driver of USB modem for my mobile phone). I don't know if that could be related but uninstalled/reinstalled the software nothing works.

    Any suggestions are welcome. Thank you.

    Hello

    This very strange noise
    Have you tried to recover the operating system with the Toshiba Recovery CD?
    If this isn't the case, I recommend trying this.

  • Satellite M100-165 cannot stop - turns on automatically after a few seconds

    Hello!

    I have the problem of identical or very similar to those described in the threads:
    Link: [http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=15325]
    Link: [http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=109125]

    When I try to turn off my Satellite M100-165 ("shut down" in Windows or even by pressing the power button while I'm in BIOS) it lights up after a few seconds. It lights when it runs on batteries. She also doesn't appear when I press the button for 4 seconds.

    I tried to recover the system with the recovery CD (Windows XP Home). I also tried with Windows Vista. Always the same.

    In fact I have BIOS version 2.90 (updated from version 1.90, as far as I remember) but with an earlier version, the problem exists also.
    I think when I got the version of the BIOS before 1.90 this problem did not exist (but I don't remember this version number).

    Thank you for any suggestions.

    Hello

    It's a very unusual question and, for me, there is not just some explanation. It will be interesting to know what Toshiba experts say on this subject. Make a call and let us know what they say.

    The strange is that the same thing will happen with two different operating systems. I can't say for sure why this happens, but your laptop is a bit confusing and of course change the shutdown with restart. If it is result of BIOS update service people should know about it.

  • Satellite M100-165 - new 320 HDD recognised as 132GB

    Hello

    I try to install a western digital (wd3200 bevt) HARD drive on a Satellite M100-165, with Windows XP SP 3
    But the HARD drive recognized only as 132 GB internal USB connected.
    I have a Lacie external USB HDD 320 GB, that work properly. Any idea?
    Thanx.

    Hello

    I think that your laptop has a limitation of LBA 28 bits, then it will be only 132GB recognized. You can learn more about this here: http://www.48bitlba.com/

    What can you do now? Nothing. You can buy a 120 GB HARD drive.

    You should also check if your external enclosure supports 320GB. Not every external HARD disk supports each size of HARD drive.

    Welcome them

  • How can I fix lines horizontal randomly and glitter for the LCD screens for HP Pavilion dv5 Vista?

    How can I correct random lines horizontal and glitter for the LCD screens for windows vista HP Pavilion dv5? Only, it happens randomly and can get all a few minutes at a time every few hours. The entire screen white and black and horizontal lines will appear during the flickering on the half top of the screen only. Nothing else changes. My sound is immutable, and none of my screens change the size or location. However, they may appear up and down during the flashing. Can someone give me an idea of what is wrong? I looked on Google for possible corrections, but most of them seem to be for refresh rate and I don't have a notch for this and can't change it according to the steps they offer.

    Read my initial response on what it takes to please.

    "See if this helps you:

    These lines indicate corruption graphics driver or lack of graphic material.

    Go to the HP Web site > Search a drivers and download article > search your laptop model number > your operating system > drivers for it: either video / graphic / Chipset (according to the wording it) > download and install the drivers.

    http://WWW8.HP.com/us/en/support-drivers.html

    If that fixed it, it seems to me be a problem of graphic material.

    Because it's a laptop; If under warranty, contact HP.

    If is not under warranty, contact a repair shop, local. »

    See you soon.

  • Update error... I tried to update for the month and each time it fails

    I tried to perform updates for the month and each time it fails.  I get the same error message... Code 646 WIndows has encountered an unknown error.  I did troubleshooting and you are unable to find assistance.  I don't know much about the workings of the computer, but I know that I should be able to perform these updates.  I think I need it too.  I have 9 at this stage that it cannot load.  Help, please!

    I tried to perform updates for the month and each time it fails.  I get the same error message... Code 646 WIndows has encountered an unknown error.  I did troubleshooting and you are unable to find assistance.  I don't know much about the workings of the computer, but I know that I should be able to perform these updates.  I think I need it too.  I have 9 at this stage that it cannot load.  Help, please!

    This link leads to a response from Bobby Mi, moderator.
    Date: July 6, 2010
    http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/18449f60-C149-4EAF-B8E6-a2880cd7232b

    Bobby Mi response will lead to this tutorial from Microsoft Support:
    http://support.Microsoft.com/kb/2258121

    Hope this can help solve your problem.
    For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

  • Recommended value for the BAM data expiration time

    Hello

    Can someone tell me what is the recommended value for the BAM data expiration time?

    Enterprise Server default is 24 hours, but I would like to be able to raise the average runtime instance after several months. Is it reasonable to the value of the time-out value a high value? Or it will have an impact on the performance of BPM/BAM?

    Thanks in advance.

    Best regards
    CA

    Normally, we keep the BAM data expiration time at halfway with 24 to 72 hours. For historical reports that you are looking for the Data Mart / Data Warehouse DB are more logical. This database stores the data forever and takes pictures at longer intervals, normally 24 hours. These data are not in time real normally then because a capture instant is only taken once per day but will give you historical reports that you are looking for. The data from this database structure is almost identical to the BAM DB.

  • Satellite M100: Cannot set the resolution 1368 x 768 on external LCD screen

    Satellite M100-179
    Graphics - ATI x 1400 card.
    Cannot set the resolution 1368 x 768 on connected usung Sub - D LCD TV Samsung 32R72
    There is no resolution 1368 x 768 in the available resolution list.

    The graphics card hardware support different screen resolutions, but if the driver doesn't contain this resolution of the screen so that you cannot choose it.
    I think so you re not able to choose this special resolution on the external display.

    In my opinion it has nothing to do with the graphics card or with the screen, but only with the graphics driver.

  • Where is the second slot of RAM on Satellite M100-165?

    Hello

    Sorry in advance for my English :)

    I have Toshiba M100-165 (PSMA1E-01W00PG3) and you want to upgrade memory RAM. But I see just a free memory slot on the bottom of my laptop. According to the manual and specifications of the laptop, there should be two slots. Where is the other? There for you, and how can I access it?

    I will be grateful for the answer.

    You are right. There are two locations of memory, but only one is user expandable!
    In my view, the other is placed somewhere under the keyboard.

    But like I said it's only one scalable user. So, if you open the laptop to access the second slot, you will lose the warranty.
    It is therefore advisable to ask and ASP technician to upgrade memory on the second slot.

    Best regards

  • Question about the picture of the screen on the Satellite M100-165

    Hello.

    I have Toshiba M100-165 and I do not know is my bad screen. ?

    I noticed that when I look on the screen and when a color is exposed and look more closely (for example gray) I don't see a color but I see only pixel everyone is on the same color. I see a little shade of that color on the screen. I think that this is not a problem of bad pixel or subpixel.
    Imagine that my screen is a sand. And when I put for example a flat color on my screen, I can see that not all pixels are in the same color. Some of them are a bit more clear and other slightly more dark. It is a very small difference, but I see this difference. And I don't know what is normal thing or my matrix display is damaged in some way. ?

    Thank you for everything.

    B.

    Hello

    Is perhaps a possible for your problem.
    Go to the control system and the display used. Until the click Properties and check the display properties. Go to advanced and check the properties.
    Check the color management.
    Go visit the Toshiba download of an update of your drivers.
    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

    By

Maybe you are looking for

  • Security preferences say I turn on 2 authentication, even if it is already

    I'm trying to set up the auto unlock with my Apple Watch on macOS Sierra, and the security preferences say I must activate 2FA before I can use my Apple Watch to unlock my Mac, but it is already lit. Any help?

  • How can I REMOVE a dictionary?

    My default language is English-Go. On a forum that I frequently use the spellchecker repeatedly returns to American English, as shown in the pop-up submenu under the languages. I hope that by removing the American option will stop this annoyance, but

  • What is "iCloud cryptogram?

    I have upgraded to iOS 9.3 on my 6s and now Apple asks me to enter my "iCloud Security Code' or check the iPhone from another device in order to access the storage of Photos. I used my iPad to check once, but this morning I got the same message when

  • Unable to transfer data of Ms money on a new laptop

    Dear all I read your Article Money 2005 patches made available by Microsoft to http://money.mvps.org/faq/article/649.aspx thank you! Please help me: 1. I use Microsoft Money Deluxe Ver 14.0.120.1105 with serial No. / * personally identifiable informa

  • Pavilion DV9008NR BIOS problem 8 32-bit Windows

    I have a mobile Pavilion DV9008NR older: RAM - 2 GB RAM CPU - Athlon Turion 64 x 2 TL-50 1.6 GHz Motherboard - Quanta 30B 9 Chipset - NVIDIA GeForce 6150 Southbridge - NVIDIA NForce 410/430 MCP BIOS HP F.43 22/03/2010 -GPU of NVIDIA GeForce Go 6150 (