Satellite M100-221: can I use 2 GB memory module in a slot?

Similar Questions

• Satellite M100: How can I use the S-VHS output

  Hello
  I have a Satellite M100. A second screen display will be only activated if I already plugged an external display to the VGA output.
  What I want is to allow my second screen so I can use my cable S-VHS on the TV.
  I wonder that my problem is caused by the Mobile Intel 945 GM video card?

  It's my third Toshiba and I never had this kind of problem before.
  So if my problem how do I use my S-VHS output?

  Thanks in advance
  M.

  Hello

  I guess you want to use the TV and not a second external monitor.
  You can connect the TV to the s-video port.
  Then, you pass the output device by using the FN + F5 key combination.
  Here you have to choose the TV and not the external display.

• Satellite M100-221: can I change the graphics card?

  Can I change the video card in my notebook?

  No, it is not possible to s.
  This question has been answered many times in this forum and I can only repeat and confirm this.
  Technology of the laptop is not the same as the desktop PC and the replacement of the graphics card is not possible. Several times the GPU is a part of the motherboard and the removal is not easy or isn t possible

• Qosmio F45-AV425 - can I use 800 Mhz memory modules

  I intend to remove the standard 2 GB came with my laptop.
  My question is since the fsb running at can 800 mhz I buy 4 GB 800 MHz? (I don't know if the motherboard can be considered).

  If I can't do this sick then just buy at 667 mhz sodimm.
  Any help would be appreciated.

  Thank you.

  Depends on the FSB (front side bus)
  If the FSB supports 800 Mhz then you can take 800 Mhz modules and modules will take place also at that speed.

  But if the FSB doesn't supports this speed so your modules will run more slowly.

  Install equipment such as diagnostic tool * Everest Home Edition * and check that your laptop support ;) FSB

  See you soon

• Cannot install driver LAN on Satellite M100-221

  I have reinstalled the OS on my Satellite M100 - 221 PSMA0E.

  HE has already used Windows XP Home Edition, and now I have installed Windows XP Professional SP2. I have an error in my DEVICE MANAGER with ethernet, mass storage controller, SM bus controller controller. But let's for ETHERNET CONTROLLER.
  I have download the real LAN driver on the official website of Toshiba, and whenever I try to install it I get the message "the specified location contains no information about your hardware.
  In the wizard NETWORK UPADATE I have same option to choose the Realtek driver, only Intel and a few others. My network card was working very well on XP Home edition preinstalled. What am I, I guess what to do? Help, please!

  Hello

  I guess you should try drivers intel instead of the realtek because drivers that your computer was shipped with a chipset Intel LAN.
  So, please visit the website of intel (www.intel.com) and download the latest drivers LAN from their homepage.

  It should work and you should soon have a working ethernet connection.

  Concerning

• Satellite M100-221 with Win 7 - issue Fn after PVAT site amenities

  Hello

  I installed windows 7 on my toshiba satellite m100-221, with 5.60 bios, I had problems with installing the chipset drivers which I downloaded from the toshiba Web site.
  Finally I downloaded the drivers from the site to intel. I realized that my Fn keys are in operation, but only Fn + ESC, F1, F5, F6, F7.
  So I tried to install PVAT that contains Flash cards.
  Everything seems to work properly, some Flash cards began, I could use them with the mouse, BUT NONE of the Fn keys worked.

  Now, I'll try to uninstall, reinstall, but without success.
  When I disable flash cards at the start that the Fn keys work, when I start it, it seems that Flash Cards takes controll keys Fn and disable them.

  My laptop is able to vista and I also tried to do the same thing with vista, but with the same result, all Fn are disabled when the cards are running.

  It is important for me to use Fn + F8 to switch to the radio wireless and Fn + F4 to Hibernate.

  You have ideas or experience how to fix?

  Thanks for help.

  > So I tried to install PVAT that contains Flash cards

  Win 7 needs the VAP (additional package) and you need to install the additional Flash Card Support utility!
  Win 7 Vientiane does not contain Flash cards! You must install separately.

  Take a look on the Satellite L500 driver area.
  You'll find the VAP and Flash Card Utility for Win7

  I recommend reinstall these two tools again

  Welcome them

• Problem with the display for Satellite M100-221 driver

  In the section of the driver of this site, I can download the display driver for my SATELLITE M100 - 221 (PSMAE0).

  There are Mobile Intel 945 Express Chipset
  For Windows Vista, I can download the dirver:
  17/10/07 display driver Intel Windows Vista 7.14.10.1227

  But for Windows XP driver for ATI chipset:
  21/11/07 Display Driver ATI Windows XP 8.283

  Where can I get display driver for Intel 945 chipset for Windows XP?

  PS: Sorry for my English, I hope you can understand me =)

  Hello

  Recheck the Toshiba download page. It seems that Toshiba has seen your ad here. ;) Driver Intel is now available.

• Satellite M100-221 - energy saving does not work - fatal error

  My laptop Satellite M100-221 the energy saver is not woarking. I get this annoying message:
  http://up109.arabsh.com/s/42gi7dkhum.jpg

  I try to reinstall the driver, and towards the end of the installation a message appears:

  C:\Progra~1\Symantec\S32EVNT1. DLL. a virtual device driver installable failed initialization of Dll. choose 'close '? to complete the application.

  Satellite M100-221 belongs to the series of PSMA0E.
  Toshiba page European pilot plans and pilot Power Saver and the Power Saver utility.
  I recommend first of all remove the system energy saver.
  Then after reboot to clean the BONES and the registry using the CCleaner.
  Then, install the driver Power Saver 2.40.0.1C and Power Saver, utility 7.03.07.C

  Good luck

• Re: Satellite M100-221: screen turns black, moving display

  Hello

  I have a problem with the LCD on toshiba satellite M100-221.

  When I move the screen, the screen goes black.

  The display only works correctly when the angle is close to 90 degrees.

  Hey Buddy,

  I m not a technician but I agree with the user above. For me it looks like a hardware problem and you should go to a service provider allowed. Technicians can check your defective parts for computer laptop notebook and Exchange.

  You can search for the nearest Toshiba for ASP site. ;)

• Satellite M100-221: Solution Possible BSOD / sound + mouse problem

  Hi all!

  Recently my Satellite M100-221 started crashing and freezing, so I reinstalled Windows XP.
  However, some problems are still recurring.
  First, before posting that, I browsed all the forum and found a few questions from people who are experiencing a BSOD (blue screen).

  I solved this problem by removing HWSetup programe of PC (because, as he wrote on the blue screen, its driver was causing a problem).
  All who have this problem should consider all the software Toshiba, because maybe this is the reason.

  However, I have 2 questions.
  First of all, which is my mouse (and touchpad too) just occasionally freezes for a second.
  I tried different mouse - but it's the same thing. (It may not be the connected with the performance of the CPU, because before the re - install XP, I didn't have the problem).

  And secondly is connected with sound - noise from time to time (whether it be the music play or simply 'click' sound effect) freezes just - which makes the periodical "trtrtrttrtr" - like sound))) that the two problems are so boring - because you just can't help the note!

  I've got drivers provided by Toshiba - maybe the problem is with them?
  So should what drivers I expect?

  Please, someone, help!

  I solved the problems and it took almost two days to determine what the problem is.
  Well, I read a lot of discussion on the failures of sounds, mouse freeze and so on. But there is always only one advice: updating drivers, BIOS, etc, etc. After two days, I have updated all the drivers on my laptop, updated the BIOS and fact repeatedly - but all that was * _completely useless_ *.
  I've got Intel Centrino Duo processor - so I started to experiment with a single core enabled - play music and watch videos and watch to the works of the processor. According to the process manager, got processor loaded at 50-60% of its power every 2-4 dry. And it turns out to be Hotkey.exe! Toshiba utility! This means that software of Toshiba's just unnecessary powerful processors, because this software is completely unprofessional. I have nothing against Toshiba - laptops are one of the best, but they should at least try their own software before distributing it with their PC.
  So I guess some problems with your laptop, mates, can be solved by turning off unnecessary all software and utilities Toshiba - just them clear in the automatic boot menu.
  Good luck!

• Satellite A110-275: can I use FAT32 instead of NTFS with recovery CD?

  Satellite A110-275
  Can I use the file system fat32 instead of ntfs disk recovery system.

  Hello

  Well, on the Toshiba Recovery CD you will find only the ghosts.
  This ghost files contains image with all the files and data from HARD drive.
  I guess that the image was made on NTFS.

  I think it s not able to change the file system on the HARD disk without formatting or losing data on this HARD drive.
  If you want to change the FAT32 file system, you must format the HDD to FAT32.

  But I put t know why you want to do. It makes no sense to me.
  In my opinion, the NTFS system is more powerful than FAT32

• Satellite M100-221 - PXE boot error message

  Hello

  I own a Toshiba Satellite M100 221 and when I turn it on it says

  PXE e61 media test failure
  Check cable pxe moF output
  Intel boot agent
  operating system not found

  I downloaded a program called Hiren Boot Cd and I he burned on a Cd and then I ran it if the 221 m100, then I loaded Windows XP Mini. I went into my computer and I don't because my partition B called drive Ram Toshiba himself. Where is my C partition? What happened to my PC? I think that the hard disk is dead. Is it?

  Hi lekhB,

  > I think the hard drive is dead. Is it?
  Is that the HARD drive is listed in the BIOS?

  If this isn't the case, it seems that the HARD drive is faulty, but in General, the PXE message means that an incorrect boot order is set.

• Satellite Pro 4320 - can I use 256 MB of ram in slot A or B?

  Can I use 256 MB of ram in the slot A or B or 128 MB maximum size?

  Memory module 128 MB is a size that can be used in a slot.
  As I remember the unit supports the 64 MB internal memory and 2 external slots for extension of memory.
  The device supports max 320Mo memor 64 MB + 256 MB (2x128MB)

• Upgrading the RAM. Can I use the old memory of the computer for the newly purchased computer.

  My old computer which does not has RAM 1.00 GB Dual-Channel DDR @ 106 MHz (2, 5-3-3-7), while the anther computer, I bought recently has RAM DDR 400/128 bits. Can I use the old memory of the computer for the newly purchased computer. Are they compatible? Thank you

  Hello nonmae,.

  You must use DDR 400/128 bit RAM in your system. @ 106 Mhz DDR is quite old. It's also much slower than the DDR 400. RAM is not particularly expensive today and it is always best to stick to that suggests your PC user manual.

  You must use the same speed too, if you use a lower speed, the memory of your PC by default at the lowest speed, thus slowing the PC

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Can we use Office default memory offline if the customer does not have enough free memory?

  Can we use Office default memory offline if the customer does not have enough free memory?

  Yes. We can use the parameter offlineDesktopDefaultMemoryScaleupValue jointly with the offlineDesktopReportedHostMemoryValue parameter in the registry.

  For example, if your client system has 2 GB of memory and the desktop view is configured to require 2 GB of memory, you won't be able to check the desktop view because low memory is also necessary for visualization of hosted customer.

  Use the parameter DesktopReportedHostMemoryValue = 2048 registry offline, so that you can go to the desktop and use the registry parameter offlineDesktopDefaultMemoryScaleupValue = 1024.

  so that the desktop view uses only 1 GB of memory when run locally.

  Reg patch: HKCU\Software\VMware, Inc. \VMware VDM\Client\disableOfflineDesktopMemoryScaleup

  Note: If it's a small environment you can do manual. Or we can simplify this activity by creating a group policy.