Satellite M100-222 - what memory module is good

Can please, someone advise me which module of memory is good for above mentioned laptop.

I would like to upgrade memory of 1 GB to 2 GB

Hello

Modules memory Satellite M100-222 supports a 533 MHz DDR2 (PC2-4200)!
The laptop runs max 4 GB of memory (2 x 2048 MB)

Check this page he s confirm my info
http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=25742&ft=m&St=3

I hope I could help

Tags: Toshiba

Similar Questions

  • Re: Satellite Pro M40: what memory modules that I can use

    Hello

    I was hoping someone could point me in the right direction.
    I have a Satellite Pro M40 part number: PSM46E-00H002EN

    I really want to upgrade the memory, but I don't know what to do.
    I know I want two 1 GB ones but I do not know what kind.

    I looked and there seems to be so much of.

    Could someone tell me exactly what I want or give me a link to buy.
    I would be grateful rerally.

    Hello

    I think you should check this page from memory Satellite Pro M40:

    Memory for Toshiba Satellite Pro M40
    http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=26119&ft=m&St=3

    It is said that you could use the DDR2 533 MHz (PC2-4200) 200-PIN SODIMM memory modules and you could upgrade the memory up to 2 GB of RAM

    Good bye

  • Satellite P100-488 - what memory modules that I can use

    Hello

    I want to upgrade my memory from 1 GB to 2 GB, but I can't find the correct specifications for the 1 GB memory current installed on my laptop.

    Indeed, I could only confirm that the frequency is 533 Mhz, but my question is: what type of memory should I use? PC2-4200 or PC2-4300?
    I am unable to find the information of the current type used on this laptop.

    Thanks in advance.

    Hello

    This site of memory should help you:
    http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=29973&ft=m&St=3

    According to this website of the Satellite P100-488 supports DDR2 667 MHz (PC2-5300) memory modules and you can upgrade it to 4 GB max.

    I hope I could help!

    Greetings

  • Satellite A30 - 151 - what memory module can use?

    Hello

    I have TOSHIBA Satellite A30-151 with 768 MB of DDR1 memory.
    I want to upgrade. What is the best memory that I can buy?

    the card says:
    Max 2 048 MB.

    So, how many slots I? I can buy 2 x 1 Go DDR1-333 memory? Can it be more than 333 then?

    Thank you
    NIR.

    Hello

    It is really an oldie
    As far as I know that you can upgrade the RAM up to 2 GB of RAM
    The bus (FSB) front-end speed seems to support 533 Mhz and that's why you should be able to use the 533 Mhz RAM modules.

    PS: The laptop must support 2 slots of memory if you are able to put 2 x 1 GB RAM

  • Extension memory with a Satellite M100-222

    Hello
    I want to develop my Satellite M100-222 from 1 GB to 2 GB. But when I opened the cover, I could not see the second memory location. Where is the second location in your opinion. Thank you...

    As you guessed, not 1 GB and 2 GB. 1 MB and 2 MB. Sorry...

    It's under your keyboard. You must open the Panel covering (silver with special buttons to Toshiba) speakers.

    Concerning

  • Satellite M100-222: display panel dithering-> high compression like jpg

    I bought Satellite M100-222 2 days. Soon, I saw that solid colors like windows default blue or gray /many of others too / appear strangely - it seems that dirty, grainy, or as strong jpg compression.

    It is not only my opinion. As much as I know that some people who have had the same problem with the Satellite A100 series-, contributed to a bios upgrade. I have the new bios, 2.60 /25.01.2007/ new drivers for ATI x 1400 cards / but it's all the same... Graphics card seems to be ok - external monitor connected to the laptop seems good. So far, no solution.

    What to do with it, what do you think?
    Why is it like that? What's wrong?

    Hello

    I checked the issue described on Satellite M100-188 with TruBrite screen. It is visible on the white and clear areas, but on Start button while that turn off everything is OK.

    I'm really interested about service information, but I'm sure that there are no bugs and according to me, there is not much to do. I know it's much worse on a Satellite phone, and because of this, it has been updated from the BIOS.

    By the way: on my old Tecra M1 with LCD panel normal white background is also not 100% clear. But I must say that TryBrite on Qosmio laptops display is bright and much better than on M100. I really put t know what difference it there but perhaps portable multimedia expencive were simply better display.

    To see what service will say about this.

  • Satellite M100-222 - RAM upgrade

    I want to improve my Toshiba Satellite M100 - 222 RAM maximum. My laptop supports 4 GB of RAM.
    The current RAM of the laptop is I bought my laptop with 1 GB of RAM by default:
    2 x Hynix HYMP564S64BP6-C4 - 512 MB (DDR2-533, 266 MHz)

    Please notify... whether for the purchase of these memory modules:
    http://www.memoryupgrade.Pro/2GB-Toshiba-Satellite-M100-222-memory-1x-2GB-PC2-4200-DDR2-533mhz-so-DIMM-upgrade.html

    I googled around a bit and found the info that you can use the module memory with part number PA3513U-1M2G. Use this number in Google and the pich up to info on price and the place where you can order.

  • Discussion of 'Windows 7' on Satellite M100-222 - complete

    Good day everyone! This post on 'Windows 7' on 'Toshiba' 'Satellite' M100-222.

    Perhaps, this method (and as some drivers & utilities) will be to apply successfully for other models M100 "Satellites". Because some very similar models on the technical level. For example, 'Satellite' M100-221 & ect. I want to share & discuss. Because reliable information and a practical guide on this subject on the Internet is virtually absent... or little information is not completely. I am having some problems. With these questions, I want to share. Perhaps, we will find a correct solution together. Please, join... Then...

    First of all, the BIOS update! This is necessary for 'Windows 7' If your BIOS version 3.00 update - Toshiba Satellite M100 BIOS update v5.60;

    Before install "Windows 7"... I updated my BIOS (v3.00) to v5.60 - Toshiba Satellite M100 BIOS update v5.60
    I did it by 'Windows' XP Pro x 32... Executable file simply run it and follow the steps.

    Note:
    There is two years that I posted the question in the present case (forums.computers.toshiba - Europe.com) on my CCF. Clock in the BIOS (I forgot the BIOS version. Original BIOS, I bought my laptop & no has not updated the BIOS then) was frozen. Sometimes the time indicators worked, sometimes not. Very little time. But indicators stood also hours. Time passing in the system. In the frozen BIOS - 13:13:13, for example. Can I update the BIOS - v3.00, I hope my CCF works again. Nothing... Two years, I worked with frozen CCF. Every day I corrected time in the BIOS manually. Seconds are frozen... Sometimes the time work... But really the time in the BIOS has been frozen. I know this isn't the RTC battery problem. Physycally battery is normal. I knew that it is a BIOS problem. Because tests revealed it - physycally battery is normal. BIOS no error message. As the problem of the RTC... Some gave advice on the forum, and I'm not a beginner... Nothing... The BIOS time is frozen...

    Thinking about upgrading the BIOS to... 'Toshiba' added value package v1.2.40 (Win7 x 32)... When installing I get the error message - 0x8146045B
    Tried to install different versions of "Toshiba" extra package. Same error... Guessed the BIOS update! Among the drivers & utilities in site 'Toshiba' BIOS for 'Windows 7 ' offer for Satellite M100 (PSMA1E) v3.00. But BIOS v5.60 shown for 'Windows' "Vista". Same platform, same core with 'Windows 7' (theoretically)... Basic logical approach! I downloaded & updated BIOS - v5.60! Great! BIOS has been updated... Perhaps, "Toshiba" value added package will install properly. I hope. I wait a few seconds after the system shuts down. I turn on my laptop & press F2 - looked at BIOS... Incredible... First of all, I've seen - seconds in my clock BIOS runs again! Each of us felt a sense of joy! But after two years... The BIOS time worked again! So, it's amazing! But don't be naïve. Certainly, there is a scientific explanation. I mean the BIOS update can help solve similar problems. But everything has to be studied in detail. After BIOS update, I installed "Toshiba" value package v1.2.40 (Win7 x 32)

    Then I found & download drivers & utilities. I checked with compatibility in "Windows 7". For two 'Windows 7' - x 32 & x 64 platforms... I'll find some utilities - Touch "Toshiba" & launch, its virtual, DVD - RAM software "Toshiba", silent acoustics, also central control Catalyst "ATI"... Here's a question open for me. But no problem, it's easy willingness...

    Then I install "Windows 7" x 64 ultimate (I managed to install "Windows 7" x 32 & drivers, before utilities).

    Always install the following drivers:

    Intel Chipset device software v9.2.0.1021 (Win7 x 32 & x64);)

    ATI Mobility Radeon X 1400 driver (Win7 x 32) or for (x 64 Win7) - requirement (download it on - http://catalog.update.microsoft.com/v7/site/Home.aspx & extract to the folder using any archivators.) Then update the VGA Standard of this folder drivers);

    Realtek High Definition Audio Codecs vR2.57 (Win7 x 32 & x64);)

    ALPS Electric pointing device driver v7.x5.303.117 (Win7 x 32 & x64);)

    Intel (r) PROSetWireless drivers v13.4.0.139 (Win7 x 32) or (x 64 Win7) - requirement;

    Texas Instruments integrated flash media controller driver v2.0.0.8 (Win7 x 32 & x64);)

    Toshiba Bluetooth stack v8.00.02 (Win7 x 32) or (x 64 Win7) - requirement;

    Toshiba registry patch for storage config v1.0 (Win7 x 32 & x64);)

    Toshiba registry patch for Win7 devices & Printers v1.2 (Win7 x 32 & x64);)

    Toshiba SD utilities v1.8.1.8 (Win7 x 32 & x64);)

    Toshiba Software modem v2.2.97 (SM2297ALD05) (Win7 x 32) or Toshiba Software modem v2.2.97 (SM2297ALS05) (Win7 x 64) - requirement;

    Toshiba v1.0.25.5C utility driver support (Win7 x 32 & x64);)

    Toshiba value added package v1.2.40 (Win7 x 32) or (x 64 Win7) - requirement;

    Of Toshiba Flash cards support utility v1.63.0.4C (Win7 x 32 & x64);)

    V4.01.00 Toshiba Assist (Win7 x 32 & x64);)

    Toshiba TEMPRO v3.3.4 (Win7 x 32 & x64);)

    V8.0.23 TOSHIBA ConfigFree (Win7 x 32 & x64);)

    Intel (r) PROSetWireless software (Win7 x 32) or (x 64 Win7) - requirement;

    Toshiba Software modem region Select utility v2.3.0.13 (Win 7 x 32 & x64);)

    Toshiba supervisor password utility v3.0.1.0 (Win7 x 32 & x64);)

    Toshiba Hardware setup utility v1.63.0.32C (Win7 x 32 & x 64).

    During system reboot do the install & updates!

    And please, I beg you, help for the next:

    Everything worked fine! But yesterday I had the installation of material of "Toshiba" and receive the runtime error message! I know that "Toshiba" HW should be compatibility with BIOS! Please tell, anyone know what version "Toshiba" HW compatibility with "Toshiba" 'Satellite' M100-222? Or 'Satellite' model M100?

    And... problems beetwen Toshiba value added utility support package & Toshiba Flash cards! Flash cards do not work... I uninstall both and reinstall again... Same situation... A few days ago worked well... But not now... I don't remember, maybe change the configurations in the settings of Flash cards... Do not remember... Help to solve these problems. It is very important!

    For example, I looked for laptop Satellite A500 - Toshiba value added package v1.2.26.64 (Win7 x 64) & complect Toshiba Flash cards support utility (Win x 64) v1.63.0.4C! Perhaps, Toshiba value added package v1.2.40 (Win7 x 64) incompatibility with Toshiba Flash cards support utility v1.63.0.4C (Win x 64)? Versions, I think that...

    Does anyone has any information about these utilities for platform "Windows 7":

    "Toshiba" Touch & launch;
    'Toshiba' virtual sound;
    DVD - RAM software;
    Acoustic silencer.

    and "ATI" Catalyst control center... For the full control "ATI" Mobility Radeon X 1400 graphics adapter "Windows 7". I can only update the graphics card drivers. But do not know which version is the compatibility with the graphics card "ATI" Mobility Radeon X 1400 "Windows 7".

    Thank you! I have very little time... Lots to do! I will try to fill the drivers on sharing files or torrent. But for this I need to collect all the drivers and utilities. I have to check. Week of rest, I set to work and share with you what I could.

    Thanks again!

    Hello Gabriel

    You wrote a very interesting announcement, but, as you can see, almost ten days later there is no one comment. From time to time I m here in this forum and I have noticed that people are not interested to read these stories.
    Problem is that you gave a lot of information and who should write the serious answer must create real concept how to proceed and has spent a lot of time for the full discussion.

    I put also t have time for an in-depth analysis, but what I can say is follow:
    If you want to install more recent OS on the old model of laptop as a first step, you should check if your model (your is PSMA1E) is supported for the operating system you want to install. I can see your model is not supported for 64-bit OS, just for 32 bit Win7.

    So what to do?
    You must have a list of all hardware components and try to install the drivers available for other models of laptops. Some 64 bit Vista drivers can be used on Win7. HwSetup designed for 64-bit Vista should work fine on your Win7 installation. I did several times in the past, and each time it worked fine.

    Toshiba touch & maybe I get m wrong but this old tools is known to me for WXP only. I've never seen in Vista or Win7.
    Virtual sound the same as for T & l. it was designed for Windows XP Home edition only.
    Two others can be also for WXP only.

    If you don t have such tools for Vista you'll them for Win7 too.

  • Win7 need display driver for Satellite M100 - 222 (PSMA1E)

    Hello

    I got satellite M100 - 222 (PSMA1E).
    I replaced a hard drive (again).
    And I want to install Win7.
    I have formatted the new drive and that you have installed Win7.
    I understand what I need to install drivers for my laptop with Win7 OS.
    I download with this site (TOSHIBA).
    But I had a problem.
    Satellite M100 - 222 (PSMA1E) and Win7 is on the s Toshiba site only this driver:
    (10/29/09 Display Driver _nVidia_ for Windows 7-32 Bit 179.76)
    I didn t have no change after installing this driver.
    I remember that my laptop has _ATI Mobility Radeon® X1400_!

    Why Toshiba offer nVidia driver for my laptop with ATI Mobility Radeon® X 1400 preset chip?

    and

    * How can I install correctly display for my M100-222 Satellite (PSMA1E) with Win7 driver? *

    You're right ATI driver is not listed, but the same graphics card has Satellite Pro A100 and the good Win7 32-bit driver you can find HERE.

    Good bye

  • Satellite M100-222: HDD temperature is approximately 50-53 degrees Celsius. Is this normal?

    Hello world!

    My Satellite M100-222 is warm enough after an hour of work. I decided to see the temperature of the CPU, graphics card and HARD drive and I noticed that the HDD temperatura is around 50-53 degrees Celsius. Is this normal? What is the temperature of the HARD disk on your laptop? Because on my desktop HDD temperature is 37 degrees.

    The CPU temperature is 47-50 degrees Celsius.

    Hi Stanislav

    Don t worry, everything is ok! The 50-53 degrees is not unusual.
    The temperature can increase to a higher level. I think that about 70-80 degrees, if the laptop is fully loaded and running with maximum performance.

    The temperature on the desktop PC is much lower because of the space inside your box.
    The cooling fans are bigger and run much faster than laptop cooling modules so that you should not compare laptop & desktop PC.

    However, as I said above, everything is ok. If the temperature reaches a critical level then the laptop turns off automatically.
    It is a thermal protection which is supported by computers laptop Toshiba!

  • How many slots my Satellite M100-222 is the RAM?

    Hi all

    I want to add RAM to my noutbook (Satellite M100-222). But I don't have my computer has a now how many slots for RAM. I think that 2 or 4...
    I know that I now have 2 512 RAM. I have empty slots now?

    How many slots, I have in all?

    Most (I think all) laptops series supports the memory locations 2 max.
    Your M100 supports also the 2 memory slots.

    Check this memory M100-222 Info page:
    http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=25742&ft=m&St=3

    Total memory Slots: 2
    Maximum memory: 4 GB

    I wish you good day ;)

  • Satellite M100-222 - damaged internal speaker

    Hello world!
    I found that my left computer s internal speaker laptop damaged physically - torn membranes (Satellite M100-222). May be long time to use more than seven years
    I want to replace it. I need advice & replace the statement. Please:
    Is this compatible with the model M100-222? I mean, yes then, what s expert opinion?

    f592 http://www.eBay.com/ITM/Toshiba-Satellite-M100-Left-and-Right-Speaker-Set-/380817307026?PT=LH_DefaultDomain_0&Hash=item58aa7a #viTabs_0

    http://www.pchub.com/UPH/laptop/77-47512-21829/Toshiba-Satellite-m100-series-speaker-set.html

    I m not an expert but I think that you have found the right speakers.
    All of them is fixed with a screw, but you will see this when you take apart your laptop.

    Please, do it with care and if you need help let us know.

    Or maybe you know someone who can do it for you?

  • Windows 8 on Satellite M100-222

    Hello!
    My question about to install Windows 8 on Toshiba Satellite M100-222 :-)
    I m using Windows 7 Pro now
    Any idea?

    My laptop s material Specifications:

    Technology:
    Intel Centrino Duo Mobile technology with Intel Core 2 Duo T7400, Intel PRO/Wireless 3945ABG network connection and Intel 945 PM Express chipset
    Clock speed: 2.16 GHz
    FSB: 667 MHz
    level 2: 4 MB cache

    System memory:
    4096 MB (2048 + 2048) DDR2 RAM (667 MHz) - maximum of extension

    HARD DRIVE:
    Capacity: certification of S.M.A.R.T. 100 GB (5400 RPM)

    ODD:
    CARPET * a BD - MLT UJ-220 s ATA Device

    Display:
    view the Toshiba TruBrite WXGA TFT 14.1 "1280 x 800 resolution internal

    Graphics card:
    Graphics ATI Mobility Radeon X 1400 (16 x PCI Express) card
    Amount of memory: 1535 MB (256 MB DDR video RAM + 1279 MB DDR2 RAM (system memory))

    I m planning to install Windows 8. But my main reason for uncertainty - drivers. Are the drivers for compatibility Windows 7 to Windows 8?

    Look at my old job round install Windows 7 on Toshiba Satellite M100-222

    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59947&TSTART=0

    I think that on this forum we have relationships not so much about Win8 installing on old machines. For three months, I have U940 satellite. I got it with Win8 but after only one month I installed Win7.

    I imagine that you are curious about Win8 on this old model. Problem is that there is no support for this older model laptop and it will be very difficult to get everything working. I think you shoul d stay with Win7, but if you install Win8 please post a report and let know us how it works.

    It may be useful for other people who have older machines.

  • Need information about ODD on my Satellite M100-222

    I have some problems with my optical device Satellite M100-222 - HL-DT-ST DVDRAM GMA-4082N
    I want to replace it with the same device or similar, I want to buy the same device but search results for GMA-4082N is not satisfactory.

    I need the correct information on some similar device for my laptop...

    In my view model name and model is best info you can get. I put t know what you want to have concrete information. Serial number maybe?

    Remove the optical disk drive and check sticker on it. You will find everything you need.

  • Re: Windows 7-Satellite M100 222 - solved!

    Hello world!

    I solved the problems with 'Windows 7' on 'Toshiba' 'Satellite' M100-222. For all those who want to use Windows 7 on this model!
    Install Window 7! Download specially for 'Toshiba' 'Satellite' M100 - 222 (PSMA1E).

    Download the BIOS v5.60! Update BIOS! Then install the drivers.
    Display drivers (ATI Mobility Radeon x 1400) you can download here - http://catalog.update.microsoft.com/v7/site/Home.aspx
    You can also download audio (high definition audio codecs 'Realtek') drivers from www.realtek.com.tw (if you care about the new version of these drivers).

    Install "Toshiba" VAP (value added package) v1.2.40.
    Follow reboots system during these operations.

    Everything will work properly! I test pilots with the compatibility of the system now.
    Also drivers for CardBus devices.

    I will write news for the 'Toshiba' users 'Satellite' M100-222.
    Good luck to all!

    Hey mate

    Thanks for sharing this info with us! It of Nice to see that you could get Win 7 working on this M100 notebook.

    Welcome them

Maybe you are looking for

  • Re: Satellite A660-149 - such display faded!

    I've had my laptop a few days and I am so upset that I can't solve the problem I have on the display. I hope it's just my ignorance that prevents me to fix things and is not fault of the laptop! Graphics and text appear terribly washed out, whether o

  • HP envy 14-2090eo: activate the ahci with new ssd on hp envy 14-2090eo

    Hi Hp experts... I just ordered a Samsung 850 evo 500 GB ssd, replace the drive hard seagate 750 GB original in my HP Envy 14-2090eo. I then took a peek in the Device Manager and found that when I click the menu ATA/ATAPI IDE controller, it shows a n

  • Acquire 2 digital signal of custom scale (Engg units)

    I am a newbie to the world of DIO. I write a VI to acquire 2 digital signals. one of a load cell and others for engine rpm (legumes). I need acquire these two signals and then convert them to engg units using the custom scale and write it in a txt fi

  • Service Pack 3 has not finished click OK to undo the changes that have been made

    Internet Exolorer 8, service Pack2 installed.  Tent to download and install service pack 3 again, Error Codes: several years ago Not enough free space.  Free storage, Total currently 6.06 GB GB 32.3.  HP pavilion 551w. Error codes: 11/10/09 OX8007064

  • HP pavilion 15 n263nr administarator password

    Hello I have a hp pavilion n263nr 15. I forgot my administrator BIOS password and after three unsuccessful attempts, I get this code: 76775424. Help, please Thank you very much