Satellite M100 - can not repair the 1394 connection & Wlan driver needed

Similar Questions

• Satellite L350: Can not access the recovery partition by pressing 0

  Heya

  I can not access the recovery on a Toshiba L350 Manager. I tried pressing 0 (zero, two of them) at first to access HD-recovery, but nothing happens. Is there something obvious that I'm missing?

  The reason why I want to access is:
  I have a l350 Toshiba with a partially installed windows here. For now, he gets the "starting Windows" and "instalation program's services began" (in Norwegian) which stops with a popupbox saying: "the computer unexpectedly inexplicable, or an unexpected error has occurred. The site amenities cannot procceed. To install Windows, you will need to click ok to restart the computer. Start the installation process. ».

  What started the problem was that during the last part of the installation (after Win7 becomes usable, but above all has been installed), escape was pressed, and the computer has been used normally.

  > I can not access the recovery on a Toshiba L350 Manager. I tried pressing 0 (zero, two of them) at first to access HD-recovery, but nothing happens. Is there something obvious that I'm missing?

  I assume you are using a European model for laptop and so you should try it;
  -Press on F8 laptop computer power on.
  -Then choose fix my computer
  -Then Toshiba HDD Recovery.

  This should allow you to start the Toshiba HDD recovery process.

• Satellite A210 - must always repair the network connection

  My wireless works sometimes, but when he decides that I can connect to the internet to fix this happens every time I turn on my laptop!

  But sometimes it won't let me fix it because it was not connected to a network making me restart my laptop.

  It is a Satellite A210-19 t and using Vista if it helps!

  Can anyone give any suggestions on how to solve this problem?

  I would recommend you to do a BIOS and driver update.
  You have this problem with the WIFI connection, connect to the local network or both?

  To check for updates from Toshiba Web site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

• Palm TX v 6.2.2 installshield can not find the Internet connection

  -At the end of the installation process installshield find no Internet connection, even if the connection is running.

  -After several unsuccessful retryes, I gave a new attempt and installation seems to complete but says Windows Desktop is not responding and needs to close.

  -J' I reopen Desktop and it seems to work very well, but the pop-up window to transfer programs to the handheld device lists no program at all.

  Help, please:

  Can I trust the v 6.2.2 update?

  What Museum transferred to the handheld?

  Most recent is not necessarily equivalent to the best.  6.2.2 was a construction needed by a society of Japan (Access) to make a version of Palm Desktop which works with Vista and newer versions of Windows.  These new versions of Windows has broken several functions in Palm Desktop 4.x, so 6.2.2 was born.  It is not a version update of Palm Desktop.

  The fact that you're having trouble installing it is eloquent.  6.2.2 is known to lose data when a computer is closed and that the program is active, doesn't have a color code for the categories and breaks up the synchronization with DataViz products.  It uses a different database structure to 4.x, so all the backups of RAW files will not work.

  I have not installed 6.2.2 on a XP box, but I guess that it will work.  I would do so if the opportunity?   N °

  As a volunteer here, I have no real power to change the existing Support files.  I'm not "discredit" anything, just to offer a suggestion.  Palm Desktop 4.2 is designed for Windows XP, and works very well with this system.

  HTH,

  WyreNut

• Satellite A30: Can not find the COM ports when trying to query the modem

  Hello.
  I have satellite A30 and I reinstall windows xp at home, but I can't find any com port whenever I try to query the modem the display hardware confilct, but in Device Manager no sign of error/confilct, I did everything what I can.
  Add the port,
  Add more then 1 port
  disable the printer port
  change the printer port
  Reinstall derver modem,
  In short, I've done everything I can. its always show (! yellow) mark.if I add the port and if I remove the port and there is no sign of error.
  If someone help me to solve this problem a little,
  regared.
  MGK.

  Post edited by: mghouskhan

  The modem uses a virtual com port. It s not a real port.
  I wonder why it usually happens after the installation of the new operating system, you must install drivers Toshiba together in the right order
  Installing the chipset utility is important

  The modem driver should do the work and you n t need to activate com ports
  Please choose the right side of the page of the Toshiba driver modem driver after installing the OS correctly. I think that's the key

• Satellite M100 - can not play missing grid Shader 3.0

  Hello

  I have a Satellite M100.
  I tried to play the grid and I got a msg following "your graphics card does not support 3.0 shader. which is necessary for the game. "

  Any suggestions?
  Thank you

  Hello

  Try to update the graphics driver and check if the new DirectX 9 c was already installed. If this will not help to get the game running, you need a new laptop with a graphics card that supports Shader 3.0

  Good bye

• Satellite L500 - can not find the drivers for the keys FN for Windows XP!

  Hello.

  I found and installed all the drivers I need for this laptop using Windows XP. My problem is that I can only activate wireless on this laptop in pushin' FN + F8 key, I installed the Realtek Wireless drivers and they are installed correctly, but I can't get wireless to work because of the FN keys. When I press the FN + F8 key, a blue led should light up next to the volume control, but it is not...

  I searched the Hotkey Utility on Toshiba India site, I downloaded and tried, but I get the error 'this utility program does not support this system', the common Modules gives me the same error too.

  I tried to install the other Hotkey Utility driver for another laptop and it does not give me this error, but it does not work either... I actually let my laptop freeze a second, every 5 seconds... and the FN keys still don't work.

  Anyone know where I can find a Hotkey Utility work for my laptop XP?

  Or maybe is there a way to activate wireless without the FN keys? I don't need the other keys... I want just a way to activate wireless.

  Thanks for your time

  > My problem is that I can only activate wireless on this laptop in pushin key FN + F8, I installed the Realtek Wireless drivers and they are installed correctly, but I can't not wireless working because of the FN keys. When I press the FN + F8 key, a blue led should light up next to the volume control, but it is not...

  Have you tried to activate the + WLan-WLan card-> properties > Device Manager in-> Advanced + tab?

  There are a few options that control the WLan card and perhaps possible to activate the Wlan it.

• Can not share the internet connection through Wifi

  Hi all

  I am connected to the internet using an external antenna connected via USB to my mac (WIRELESS n 801.11). I want to share this connection since my mac with other devices, i.e. my iPhone. I use the internet connection through system preferences--> sharing--> sharing internet--> connection on the part of wlan to computers via WIFI and give a name and a password for the wifi settings. When I start the connection icon wifi on the the high watch the arrow menu to the top, but it gives an IP address from 169 auto... etc etc and I can't any traffic to my iPhone.

  I tried to configure IPv4 to use DHCP with a manual (instead of automatic DHCP) address and IP I enter the IP address used in the WiFi, wifi says that it is connected to the name of the internet connection in the shared connection, I opened but once again no traffic to the iPhone. Also tried disabling the firewall, once again nothing.

  I run El Capitan 10.11.2.

  Clues?

  OS X El Capitan: share your Internet connection

• Satellite A100 does not recognize the new CD/DVD drive

  I bought a new CD/DVD drive for my A-100 of Toshiba Satellite age of four year old went crazy and wouldn't work.

  Unfortunately, I bought a DVD of Toshiba Portege A100 / reader Combo CD - RW that is not exactly what I had before the jump that it will still work.

  Unfortunately, I'm surprised because it does not recognize the CD/DVD drive at all: /...
  It seems to work, and the light blinks I think that it is not broken.

  I just plugged it because that's the way I was told to do.
  I need to download the drivers to operate?
  It will work on my laptop, or is it a "most recent" CD player that will not work with my laptop?

  I'd appreciate any help. THX

  The BIOS does not recognize this new CURIOUS because the player seems not to be fully compatible.
  I think there bad master/slave/c-salt settings

  As you know these settings can be changed on the external CD/DVD drive for desktop switching jumper. But it is not possible for computers portable CD/DVD players.

  You can solve it only purchase a new compatible disc.

  Usually the ASP in your country could help you buy this disc of these guys here
  However, you can consult the user manual if there are a few details on the compatible sides.
  My user manual provides this information.

• Satellite M100 will not charge the battery while the computer is on

  Hi all

  I have a M100 and the battery won't charge while it is running.
  The battery starts to charge when I plug in the adapter and the orange light comes on. 10 seconds later it stops charging.
  If the battery has more than 90% of the costs it wll the rest very well.
  I have three batteries that all do the same thing on this computer. All three batteries are working fne on my other M series.

  When the computer is off, it loads very well.

  Why is it so?

  Hello

  I think that the problem of charging the battery is about the problem of portable equipment.
  Maybe it's something s wrong with electronic power supply or another part on the motherboard.
  I doubt that the problem could be solved by updating the BIOS but you should definitely check if you are using the latest version of the BIOS update and test again
  If that does not help, then you should get in touch with a local service for verification of equipment technician

  But note; If it s the question of the motherboard, the motherboard needs to be replaced and it would be a costly affair

• Satellite L300 can not detect the CD/DVD drive

  Hi all!!

  I hope someone can help! My laptop can't find my CD/DVD-rom device.
  I haven't done anything with it, have not installed all the software and Device Manger shows:
  The device cannot be charged - when I want to update the driver - check systems and the driver is the most recent?

  When I de - activate and it the system will find the same driver. But no CD DVD device.
  TSST corp CDDVDW TS-L633A

  What can I do to get access to this new?
  Thank you!

  Hello

  What operating system do you use?
  What is the status of the optical disc drive in Device Manager?
  I assume that the drive is not displayed in windows Explorer. Can you confirm this?

• Satellite A30 can not find the DVD - Rom drive

  My satellite can find the discs to DVD - Rom, but cannot find the hardware.

  Had any idea

  Hello

  Please check the announcement in the forum:
  You can also try this method, which is described on the Microsoft Web site:
  http://support.Microsoft.com/?kbid=314060

  Please report if you have resolved the problem.

• VISA can not find the oscilloscope connected via Ethernet (LAN)

  Hello

  I'm using Labview 8.5.1 and installed 4.5 VISA. I connected my computer to an oscilloscope Agilent DSO5014A via the ethernet cable. I installed the driver (I even tried the 2 versions found here http://sine.ni.com/apps/utf8/niid_web_display.model_page?p_model_id=10256).

  In "Measurement and Automation Explorer" However, after clicking on 'Devices and Interfaces' and then 'new', the device is not automatically found and manual entry of the IP address is not more successful. (I checked that my Ethernet port works and cable as well)

  Any idea?

  Well, IP - thing seems to be linked to the AGILENT driver. Sorry, but I have no opportunity to test it, because I don't have one of these scopes. By the way: great synchronization

  Best regards from Munich

• Can not burn the media "connect a burner and restart the player.

  I have a laptop Dell Latitude with windows 7 and WMP 12.  The two programs are underway.

  Until recently I could burn CDs without any problem.  Now, I get the message:

  connect a burner and restart player

  I tried troubleshooting and remove/reinstall the readers of DVD-CD-ROM as suggested by the previous discussions on this issue.  None worked.

  What to do next?

  Thanks to all those who can help you

  We went from music, Photos and videos for devices and drivers>

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Then try this one! R

• Can not see the "wireless connection" option in the drop-down list in 'sharing' under the ics. Trying to establish an ad hoc connection.

  I'm trying to set up an ad-hoc connection between two laptops. I created a network. When I right click and select Properties. On the sharing tab, there is a check box for "allow other users to connect to this network. Below that, there is a drop down menu to "connecting home network." My problem is that I can't "wireless connection" under this sow drop andhence cannot establish a connection. Help, please! Using windows 7 64 bit home premium and have ralink 5390 adapter. I have internet through a wireless internet service provider. I use "Reliance Netconnect + wireless internet".

  Hi Amit,

  Please refer to this link and check if this helps you,

  Set up a computer-to-computer (ad hoc) network:

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network