Satellite M115-S3094: error - cannot create a D3D Device

Hello

I accidentally deleted a graphics card driver, but managed to get it back, but before I deleted it I used to play the game (poker 3d) pkr but now when I load it, it comes up with an error message saying ' has not been initialized client - unable to create a--2005530516 D3D Device,--

Do not appear as all my folders on my desktop. The only way I can get this on the screen is by pressing the keys ctrl + alt and delete and then type in the office.

All this started to happen when I tried to connect my laptop to the TV.
I'm on Windows XP media center. It's an a Toshiba Satellite M115-s3094.

Can anyone help please because it drives me crazy that I'm very close to break the laptop computer in frustration.

I don't know the driver of its use as all it says is unknown. If anyone can help or give me an idea on how to solve this problem, I would be very grateful.

Bravo for your time.

Hello

Sounds a little like the Direct3D are not enabled in you the graphics settings.

Please, start the DirectX using the dxdiag command and turn on all the 3D settings.

In addition, it would be advisable to delete the installed 3D poker game and then reinstall it again. This should contribute to reconfigure the game graphics settings that are needed to run the game properly.

Good luck

Tags: Toshiba

Similar Questions

  • Satellite M115-S3094: no sound on internet

    I've disabled the sound driver on my laptop, then allowed him. I have sound if I play a CD or computer laptop itself but not of her on the internet.
    It's a Satellite M115-S3094 running Win 7. Any suggestions?

    Thank you

    > I don't have sound if I play a CD or computer laptop itself but not of her on the internet.
    This means that its driver is OK and it s installed.
    I think that the wave volume control has been disabled or set to the lowest level

    Go to control panel-> sound-> playback control and check the volume level for all devices placed in the reading tab

    PS: the Read tab you must enable "hidden devices" and "disabled devices" by right-clicking and by checking options...

  • Satellite M115-S3094 freezes after RAM upgrade

    Hello

    I just added Corsair - 2 x 2 GB 200 PIN SODIMM DDR2 667 mhz memory to my laptop Satellite M115-S3094.

    Earlier I had 512 MB included with the laptop. The problem is that sometimes the computer starts and freeezes, none of the buttons work and I have to hold the button for 10 seconds to turn off and restart the computer. Sometimes I restart 2-3 times until it works.

    If there is any problem after commissioning, then I find myself using the laptop for hours like now and I won't have any problem until I restart.
    This all started when I upgrded memory. I tried to re install and it did not help.

    I would appreciate any help from anyone who has faced such a problem. I also have windows xp home edition.

    On the casablenca system, it shows 4 GB but used is only 2 GB. I even deleted one of the sticks, but I still have the same problem.

    Hello

    I think that the problem is without a doubt for new modules of memory installed
    Maybe the modules aren't 100% compatible or failed modules

    I guess the laptop ran correctly with the old module of RAM.
    This would confirm my hypothesis and I think you should test the specifications with the other s RAM

    Good bye

  • Satellite M115-s3094 - can't burn anything on disks

    Hello

    Can someone please help?

    I have a toshiba Satellite M115-s3094.
    The problem I have is that it does not burn anything.

    I put a white inside and then it starts to burn and it fails, other times it says full.
    When I take the cd it looks like its been burned on the disc, but when I put it in the laptop, it appears as a white, and there is nothing on it, but see you that looks like it was burned...

    Please help its been like that for weeks... I use Nero 7...

    Thanks in advance...

    Hello

    What kind of discs that you use to burn and that is happens with CDs or DVDs?
    I have good experience with Verbatim CD and DVD-R as well as TDK discs.
    Then maybe you should check it with a high quality disc.

    In addition, you should look for an update of Nero. You can find it on the site of the factory.

    Last but not least I would like to delete upper and lower filters in the registry. That's why check of workaround from Microsoft:
    http://support.Microsoft.com/kb/314060

    Good bye

  • Where to find the driver Hotkey Utility for Satellite M115-S3094

    Hello

    recently bought a Toshiba Satellite M115-s3094 laptop and you want to install the utility driver hotkey.
    Can't find it in the download from toshibas support website.

    Thank you

    Satellite M115-S3094 was designed for the American market.
    Each Toshiba laptop with the 5 at the end of the model number is a laptop Toshiba us and is why we search the Toshiba site we needed software.
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp

    Good luck

  • Need drivers for Satellite M115-s3094

    Hello

    I have a Satellite M115-s3094, I had problems with my OS which was Windows XP MCE, but I couldn't fix it. So I got fed up and loaded in windows XP Professional, but a lot of my drivers are gone.

    I need drivers for Ethernet controller network controller, PCI device, flash memory, USB controller, SM bus controller, video controller... plus I have no sound. It is an Intel centrino duo... as you can see miss me a lot of pilots.

    Could someone tell me how can I find out what kind of driver I need and where do you get them from? Win XP SP2 installation would install one of these drivers?

    Any help at all would be much appreciated...

    Thank you all...

    I have the same problem. I just need the drivers for the Ethernet controller and a PCI device. I guess that the PCI device is the wireless card.
    I tried all the drivers on the Toshiba site, but none seems not to work.

    Please help us.

  • Express on a Satellite M115-S3094 media player controls

    I have a Toshiba Satellite m115-s3094 notebook. It came with the express media player feature. It worked when I ordered my playlist in windows media player 11.

    Today, the controls do not work at all.
    The two buttons above the controls (Internet and Media player) are fine, but I can't control the media player with the express media player controls.

    I've switched back to wmp 10, but I can't control it yet. I don't know if the express media player controls can control Media Center or not because I never tried to use it in media center, but the controls don't work not in media center either.

    I use a lot of these controls, if anyone can tell me how I can solve this problem.

    @ Gethsemane
    Yes, you must use the drivers and the CD of tools & utilities applications delivered. You need all if you want to use all the features of Toshiba laptop.

    Have you received a recovery CD? This CD contains the operating system image that contains all the drivers, tools and additional software. Just starting this announcement from CD, you will get full functional OS.

  • How to clean my keyboard Satellite M115-S3094

    I already posted this time. How to clean UNDER my keyboard on my Satellite M115-S3094?

    I really need to know how to get the keyboard up, or do I have to remove each key for this? Someone please help.

    Thank you...

    Do you mean this thread?
    http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=113741#113741

    It of possible to remove only the plastic of the keyboard keys.

    Then you can try using a vacuum cleaner and could thoroughly clean dust and debris from the keyboard.

    Best regards

  • When the computer restarts, I get the error cannot create shell notification icon please help

    When I reboot count it I get error cannot create shell notification icon can any body help me

    Thank you

    Hello

    ·        Since when are you facing this problem?

    ·        Remember to make changes to the system?

    I suggest you update your BIOS, check with the manufacturer of the system for further assistance.

    Apart from that, I suggest you do an online virus and malware scan on the system.

    http://OneCare.live.com/site/en-us/default.htm

    If the problem started occurring recently, then I suggest you to do a system restore. See the article mentioned below.

    How to restore Windows XP to a previous state

    http://support.Microsoft.com/kb/306084

    Thanks and regards.

    Thahaseena M
    Microsoft Answers Support Engineer.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • In creation of Windows 7 DVD, download "unspecified error cannot create DVD.

    in creation of w7 dvd, I get after 0.8% "unspecified error cannot create dvd" How can I find this kind of error is, so I can fix it, because on this forum, there is no real answer to this problem. I have a new 64 bit w7 pro, no other software installed computer and works fine engraving only dvd burner the files.

    Hi alexveres,

    1. what type of file you want to burn?

    2. is it works much earlier? If so, then remember to make changes to the computer?

    Take a look at the following links for possible solutions and check if that helps:

    Error message when you try to publish a movie to a DVD using Windows DVD creation in Windows Vista: "unspecified error".

    Problem with "unknown error" when burning DVD

    I hope this helps.

  • Standalone downloaded lightroom 6 on a MacBook Pro. Impossible to get a program to open - an internal error cannot create the required folder.

    Downloaded standalone 6 Lightroom on a MacBook Pro. Impossible to get a program to open - an internal error cannot create the required folder. Any suggestions about how to proceed?

    Hi woodysk

    Greetings.

    • You will need to read and write permissions on the Adobe folders manually.

    Please follow the steps below:

    • Right-click on the icon in the Finder and select the 'Go - To' folder option.
    • You will get a text box, type in the following command and then press the 'return '. (Don't miss ~ symbol)
      • ~/Library
    • Then go to the Application Support > Adobe.
    • Right-click on the Adobe folder, then select the GetInfo.
    • Expand the section sharing & permissions.
    • Click on the padlock icon in the lower corner on the right. Enter your administrator user name and password when you are prompted, and then click OK.
    • Please click on '+' symbol, it will open the list of user accounts.
    • Add all of the user accounts and then give permission to "Read & write" to all user accounts. (If not agree, just add currently logged in username and administrator)
    • Click the gear icon and select apply to closed. Close the dialog box for information.
    • Then launch Lightroom application and check.

    Let me know if still face you any issue.

    Concerning

    Rohit

  • Fatal error of TOSHIBA Power Saver 0x51A on Satellite M115-S3094

    Hello

    By the subject, that's the problem. Unfortunately, my computer which is Toshiba M115-S3094 has just recently a fatal error with the Toshiba Power Saver program like 3 days ago. The Toshiba Power Saver not only does not want to work, but it is even more present in the taskbar. First, I went to the properties to be able to restore the program, but nothing helped.

    Then I tried to uninstall and then reinstall the program, and he always gave me the same problem with the error: the program ends. Error fatal 0x51A. Right now, my laptop does not on the mode of power supply Toshiba but on common Windows system, such as the presentation or the laptop.

    So I need help to restore the Toshiba Power Saver. I run Toshiba M115-S3094 with Windows Media Center Edition.

    Hello

    Satellite M115 seems to be a Toshiba laptop because of the 5 at the end of the number.
    In this case, you must use the Toshiba on the Toshiba site energy saving us. Did you?

    Maybe you used the right utility electricity saver, so possibly that some registry or system files keys are damage in this case install the new OS for the Toshiba Recovery CD would be desirable.

  • Strange problem with Toshiba Express Media Player on Satellite M115-S3094

    I am facing a strange problem in my Toshiba M115-S3094, which has been pre-installed with Windows XP Media Center edition and which also had the Toshiba Express Media Player.

    I had already done a clean install of Vista on it, and then I decided to go back to XP with my recovery DVDs. I did the same procedures of first installation Express Media Player to backup (that I did when I bought the laptop) and then installing Windows XP DVD de Toshiba Recovery XP.

    The steps included:
    1 deleted recovery Express media player disk partitions
    2. installed express media player
    3 extracted Xp Recovery DVD, by selecting 'Recover without changing the Partitions' (there is no expert mode)

    Everything was fine (i.e. installation)... But now, after the turning off my laptop I press the Express Media Center button, the logo "Express Media Player" appears on the screen after loading of closures of laptop for 5 seconds.

    I tried to open it again and again, but the logo is displayed for 5 seconds and then my laptop stop...

    Laptop works fine when I connect to windows by pressing the power button / stop.

    Can someone help me on this strange question... ?

    Hello

    The whole story is a bit confusing
    First of all, I would like to know if your laptop is already preinstalled with the Media Express Player and if you were able to use it on your laptop in the past.

    Now something about the Express Media Player installation;
    In order to use the media functions Express the Mediaplayer Express Recovery CD must be performed before performing the recovery from the recovery DVD-ROM products.

    In addition, on the HARD drive should at least 150-200 MB of free space available.
    This free space must be on the end of the HARD drive and there must be unallocated. To get these free space on party products 3rd HARD drive should be used as Partitions Magic 8.

    I m not 100% sure that on error ID system badly but maybe it corresponds to the DMI evil information stored on the motherboard. If we're not DMI, you will not be able to reinstall Express Media player using the recovery media express CD.
    In the DMI must be set properly the manufacturing: Toshiba, product name: for example by Satellite M115-S30

    Finally and most importantly, I found this thread useful forum on the Media Express recovery procedure:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=51801쩙

    Could be useful for you!

  • No satellite M115-S3094 no video or post after Bios Update

    I have a Toshiba M115-S3094 with v1.20 bios and Windows XP. I read this on the Toshiba web site:

    Support news
    Updating BIOS for Satellite A100/A105, Satellite M110/M115 and Tecra A7
    Posted the: 10/04/2007
    Updated the: 10/04/2007 15:51:53

    In very rare cases, the battery of your PC may stop to accept a charge, i.e., the battery no longer works and is no longer supplying power to the computer. To minimize the risk of ever face this problem, we strongly recommend that you download and install the latest version of the BIOS by clicking on the "Downloads" link that will appear when you have finished reading the news of support.

    Given that I had intermittent battery problems, I thought I would update the bios to version 1.80.
    After the flash system says that it needs to restart. When it restarts the power light is on, but there is no video or post.

    I could do to fix this?

    Any help with this is greatly appreciated,

    Eric

    Hello guys

    I'm sorry to hear that. That's too bad. Maybe you should contact the closest to the ASP and ask if this is known issue. Maybe they learn more about this issue then direct line of agents.

  • Empty Device Manager and for error message "cannot create the enumerated device root need to install Parallels paravirtualization pilot".

    Original title: Device Manager empty

    I have Windows XP Service Pack 3 installed in a Bootcamp partition on my Intel iMac. I can detect and install new hardware such as USB keys. However, the Device Manager window is blank - how can I get the window to display the devices connected to the computer? I am also unable to install Parallels tools when I use Bootcamp as a virtual machine. The error message "cannot create the 'root-enumerated device' necessary to install Parallels Paravirualization driver.

    Hey Harcjk,

    For your first question, go through this article.

    None of the items appear in the device list manager when you open
    http://support.Microsoft.com/kb/311504

    For the second question, here are some suggestions:

    Method 1: Uninstall & install Parallels tools

     

    NOTE: we highly recommend you make a backup of the virtual machine before you continue.

    a. start your virtual machine and cancel the installation of Parallels Tools Wizard.

    b. Click Start--> Panel--> Add / Remove programs and remove the Parallels tools in the list of applications.

    c. restart Windows.

    d. install the Parallels tools by clicking on the Virtual Machine--> install the Parallels Tools.

    Method 2: Uninstall antivirus software

    If the problem persists, try the following:

    Temporarily uninstall all the antivirus software to the virtual machine and repeat steps of the "Uninstall & install Parallels Tools" section above.

    Note: Don't forget to install the back antivirus software, once the problem is resolved.

     

    Method 3: Uninstall, clean & install Parallels tools

     

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

     

    How to back up and restore the registry in Windows XP

    http://support.Microsoft.com/kb/322756

    a. If the problem persists, try the following:

    b. start Windows.

    c. go to "Start" > "Control Panel" > "Add/Remove Programs" and uninstall theParallels Tools if it is present.

    d. go to 'my computer' > 'C' drive > "Program Files" > "Parallels" folder and delete the "Parallels Tools" folder, if present.

    e. click the Windows 'Start' menu-> 'run' and type 'regedit'. Click OK.

    f. in the registry editor, go to "My Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Parallels" and delete the heading "Parallels Tools" and go to "My Computer\HKEY_CURRENT_USER\SOFTWARE\Parallels" and remove the 'Tools' section.

    g. restart Windows.

    h. now install Parallels tools in the 'VM' menu on the Parallels Desktop menu bar, while Windows is running.

    I hope this helps.

    Kind regards

    Shinmila H - Microsoft Support

    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for

  • Click of the mouse stops working after you start the first application

    Hard to explain this problem.  First time I click on what either in an application after computer startup (Word, Excel, etc.) the arrow of the mouse moves, but the click does not, anywhere, not on the desktop, taskbar anywhere.  Accentuates not delay

  • Create the recovery Partition

    I got HP recovery discs to fix a machine that crashed a HD. The recovery disks will recreate the recovery Partition or just the Windows Partition?

  • Problem with cutting and pasting online

    I was not able to copy / paste everything online using IE or another browser.  I can't understand what I need to do to remedy this situation.

  • How a shared HP PSC 2110xi can be put online?

    A shared printer, HP PSC 2110xi Windows 8 computer via the USB port, always has the status 'offline '.  The printer was operated on and off several times and the computer has been restarted several times, but nothing has been able to change its curre

  • ObjectChoiceField: how to set the width of the drop-down window

    Hi guys,. How would you define the width of the window from the drop-down list (which displays all the elements of choice of the field of your choice)? The application automatically sets the width based on the width of the items of choice. Thank you