Satellite M200 - problem detection USB connect after waking from sleep mode

Similar Questions

• Windows 8 I lose the internet connection after waking from sleep mode

  My wife has a new laptop from Toshiba with Windows 8. When he wakes from sleep mode, it detects all wireless signals. If it restarts the computer, it detects our own wireless, as well as all the neighbors signal. Is there a simple way to correct this trend? She dislikes having to reboot the computer whenever she wants to use it.

  Very interesting what's happening on a new machine. Are you sure the original wireless network card driver has not been updated (i.e. through Windows Update or its equivalent at Toshiba?)

  I guess that the wireless network card driver doesn't handle well "message sent" by the system when it changes the power state change leading to a 'dormant' device (in this case the WiFi network) on the revival of the fashion Watch (same problem with the Hibernate?).

  Not knowing your model Toshiba, or wireless network card let me suggest you try the following if options exist for 1 # *:

  1. Go to the section of the network adapters and Device Manager. Right-click your wireless card, and select Properties. Go to the power management tab, uncheck allow the computer to turn off this device and check allow this device to wake the computer , and then save your changes
  2. Go to the control panel and Power Options to change the parameters of the plan (for the selected power Plan), and then select change advanced power settings / wireless adapter / power save Mode / connected and select value is A maximum Performance otherwise affect this value

  * Not sure about my translation of terms/options used above - I am not in an American version

  If the above does not help I'd you make investigations with Toshiba on this issue as the owner of a new machine, you're probably eligible for a level of support.

  + Feel free to bring your network card and Toshiba models - this helps in search of possible measures and troubleshooting. And it could help other people if solve you the problem sooner or later...

  Hope this helps

  See you soon

  LZ.

• Portege R830-10R: No. USB connection after recovery from sleep mode

  Nice day!

  I have experienced the problem depending on my Portege R830-10R for a long time.

  Quite often, when he recovers as soon as "sleep" mode it loses the ability to recognize USB devices and built-in 3G modem does not work as well.

  After awhile, like 10-15 minutes of work (or), the problem is solved by itself, but normally, it is not the case.

  If I try to send the laptop to Hibernate or "standby mode" again, while this problem is active, allows to say, it not put into hibernation and crashes on a midway with a black screen - so I have to stop it manually, and then start again.

  Normally, the only way to solve the problem is to restart, but the issue comes after the next "standby".

  Someone has something like this? Any solution available?

  Hello

  > Quite frequently, when he recovers as soon as "sleep" mode it loses the ability to recognize USB devices and built-in 3G modem does not work as well.

  Have you noticed this behavior from the first day of purchase?

  Only special USB devices assigned as USB flash memory stick or USB HDD or are
  other devices such as the USB mouse or USB keyboard has also affected?

• Satellite A660-18 - powers off after waking from sleep mode

  My powers of Satellite A660-18 wide for 2-3 seconds after waking from sleep. I upgraded the memory from 4 GB to 8 GB, using the site of Crucial, so I know it is compatible. BIOS is updated to 2.00.

  Don't know what to do, how can I fix without turning off completely from mode "sleep"?

  Hey Buddy,

  > I upgraded the memory from 4 GB to 8 GB
  And have you had the problem before you upgrade memory too or as memory upgrade?

• Computer is slow after waking from sleep mode

  Original title: my computer is very slow to wake up from sleep mode, especially in the morning, how can I solve this problem?

  Every morning, I'm not able to open any program. If I click too, it freezes andgets cloudy. I know that this is not a virus, because I used my Norton Power eraser and it found no threat.

  Hi OtiliaRodriguez,

  -Did you of recent changes made to your computer before this problem?

  Look in the event viewer to see the error message or error code originally this problem.

  The event viewer is an advanced tool that displays detailed information about important events on your computer. It can be useful when troubleshooting problems and errors with Windows and other programs.

  For more information, see:

  Open event viewer

  What are the information in event logs? (Event Viewer)

  In the meantime, try the steps listed in this article:

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista

• HP e9150t freezes and stutters after waking from sleep mode

  This has been a recurring problem since the beginning. I have a HP with Windows 7 (64 bit) installed e9150t. It works very well. The only problem it's wake after sleep. He wakes up fine, in a first time. The time varies. 1 minute to 10 minutes. The first sign is the mouse stuttering across the screen. It's usually when I shut down the PC, because I know that in a few minutes, it's crash. I have the latest version of 5.29 installed the bios and that did not help with this problem. Other suggestions will be appreciated. Thanks in advance! Mike

  Maybe this will help.

  http://www.hpelitedesktopsettlement.com/default.aspx

  I sent my 9180f and they replaced the motherboard and the hard disk, but unfortunately it is still the Truckee 1.03e Pegatron motherboard. I noticed the mouse stumbling and fall in and out lik before... only no BSOD still USB!

• El Capitan - no USB power after waking from sleep

  MBP 13 (2015)

  10.11.2 OSX

  When to wake up my MBP of sleep, the USB ports are not powered.  I have to reset to get my keyboard midi and audio DAC to work.
  I confirmed this only happens on El Capitan by restoring my machine to the latest Yosemite backup, that I had and everything works as expected.

  Does anyone have an idea where to look?

  And if you have powered external usb HD, you get reprimanded for not properly eject the disc. A lot of complaints about this, but no response from Apple.

• Safari crashes after waking from sleep mode mac mini

  And to make things more awkward, it seems to freeze with youtube and google. He has not done this since the beginning. Lately, he's starting to do this. It is so boring. All other sites work except these two, or at least those's ones I learned to freeze. Open a new Help window sometimes. But earlier, I had to start the mac everything again to access youtube. So what to do? After the mode 'sleep', I can't seem to google, but I can get to atavist for example. YouTube is the only place that I can't replace and for real - it's so idiots clitch he needs an explanation.

  Try the suggestions in this article http://osxdaily.com/2015/01/18/troubleshoot-safari-freezes-crashes-mac-os-x/

• Go back to sleep after waking from sleep mode pc guard

  I have problems with my pc for the last two weeks when I put my computer to sleep and then when I try to wake up, he will wake up for a second and the screen lights up then goes just right back to sleep and then I try to wake up again and it will continue to do this 4 or 5 times in a row before I can use the computer again. I have a HP computer and am running Windows 7. I have no screensaver on and in the management of food to balanced plan change: I turn off the screen and put the computer to sleep both the Never value. My computer will also wake up in the middle of the night when its mode "Eve".

  Hello China423,

  Thanks for posting in the Microsoft Answers forum! Try to check your event viewer to see if there is a particular program or update that is causing the problem. For event viewer simply enter in Event Viewer in your Search bar , and then Select. If there is in fact a program at the origin of the problem, try uninstalling the program and see if that fixes the problem.

  Please let me know if this helps J

  Adam
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Satellite P300 - white screen after waking from sleep state

  I'm having this problem:
  The LCD screen may be empty when the computer is "awakened" from the sleep state. Nothing is visible on the internal LCD or an external monitor.

  There seems to be a solution:
  An update of the firmware for a component in the main circuit of the computer solves this problem. This update must be performed by an authorized Toshiba (ASP) Service provider. Until arrangements are made for the update, restart the computer by pressing the power on button for a few seconds.

  described here: [white screen after awakening from fallback status | http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_dtlView.jsp?soid=1642844&moid=1209152]
  -----
  I also found this, but it didn't really help me much further.
  [Satellite P200D and WinXP: no display after waking from sleep mode | http://forums.computers.toshiba-europe.com/forums/click.jspa?searchID=880412&messageID=118143]
  -----
  In fact, I think I'm able to solve myself, and I don't like not my laptop to be gone for two weeks or more. I just need some advice on where to find a correct upgrade. Is - this driver BIOS or graphics? Which version should download, where... etcetera. More tips on how to solve the problem are also welcome.

  -----
  Edit: link and no need for words of line. : s
  Edit2: grammar correction.

  Hello

  > An update of firmware for a component in the main circuit of the computer solves this problem. This update must be performed by an authorized Toshiba (ASP) Service provider. Until arrangements are made for the update, restart the computer by pressing the power on button for a few seconds.
  If you check the Toshiba document you would see that your Satellite P300 is not related to this issue.

  In your case I would recommend upgrading the BIOS and graphics driver.
  In addition to keep your operating system up-to-date.

  I had this problem under Win XP and a MS patch and an update of the graphics card driver helped solve this problem.

• Satellite T110 - Defective Bluetooth after waking from sleep

  SATELLITE T110 Bluetooth will fail after awakening from sleep.
  The icon will be flick between white and green as he seeks my device (phone).

  I ve reduced the problem to the laptop, because if I try to pair again phone to the laptop it fails. It's almost like he has a block?

  Operate as planned, then I have to charge fully.
  Bluetooth connects then as planned.

  It only became a problem because I installed the latest BIOS v 2.40
  I use the 64-bit Version.

  When the problem occurs I run the Bluetooth Diagnostics and it comes back as fine no error reported. It s a pain now because I use the laptop mode "sleep" more off.

  This is due to the new update of the bios.

  Can you after waking from sleep just restart BT stack and try to connect to the mobile phone?
  You mean that with the old version of the BIOS, everything was OK?

  Last question: what was the reason for the update of the BIOS? I hope not the fact you want to have the latest version.

• Photoshop CC 2014 quits unexpectedly after waking from sleep on Mac OS x. How can I stop this?

  Photoshop CC 2014 quits unexpectedly after waking from sleep on Mac OS x. How can I stop this?

  suturenet wrote:

  It's a stupid system, it won't let me post more of the report.

  Yes, the forum software is stupid, but you are insulting the wrong people.

  BOILERPLATE TEXT from the FAQ:

  https://forums.Adobe.com/thread/375816?TSTART=0

  Do not be abusive or aggressive in your tone

  A post of sounding aggressive, demanding, accusatory or abusive will often evoke a response aggressive or abusive and unnecessary.

  Remember, you do not discuss Adobe here in the user forums.  You ask the help of users of volunteers like you who give their time for free. Nobody has any obligation to answer your questions.

• fqdn ping fails after recovery from sleep mode

  client system is win7 64 bit

  Server DSN is isc bind 9.7 works on win 7 64 bit

  local system of fqdn ping fails after recovery from sleep mode.

  I do not think that the ping never hits the network.

  Nslookup of full domain name or name of the system only exists.

  the system name ping only succeeds.

  then after ipconfig/release, ipconfig / renew, successor to ping the domain name full local system.

  someone at - it thoughts or ideas?

  Hello

  From the description of the problem, it seems that your computer is on a domain. I suggest you post the same question on the link below. The link given below is link TechNet Support for Windows 7. The question facing you is best for TechNet forums.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Feel free to write us if you have any other issues related to Windows.

• Satellite L40-139: new graphics driver is causing the problem after waking from sleep

  I have a three month old Toshiba Satellite L40-139 (PSL40E) with 1 GB of RAM with Microsoft Windows Vista Home Premium pre-installed. This laptop worked very well for me for the basic headquarters far tasks, and I would have no problem recommending.

  In the last days I've updated the software and drivers from the Microsoft Update web site.

  Since the update driver Mobile Intel(r) 945 Express Chipset Family (to version 7.14.10.1350, dated October 18, 2007), the screen resolution at 800 x 600 after awakening from the sleep state. The only way I found to fix it is to restart the PC.

  Other articles published on the web, I understand that this particular driver (Mobile Intel(r) 945 Express Chipset Family driver 7.14.10.1350 version) has caused many other problems on a variety of hardware and software platforms.

  Does anyone have a definitive solution for Satellite L40?

  I looked at four options.

  1. let the new installed driver and restart Windows each time after waking up from sleep mode. Rather, I must not do this.

  2. using the Restore Point created by Windows Update before the update of the driver, roll back to an earlier time. This seems to be a good course if it works.

  3 download an older version of the driver and reinstall it. I don't know which version would work but note that others have had success with the 7.14.10.1280 version. I guess a similar version could be included in the driver Package that can be downloaded from Toshiba Europe site, but have heard that the time required to download this software can exceed ten hours and am therefore reluctant to try.

  4. the fourth option is not really possible. I should be able to "Roll-Back" the driver in Device Manager, but the button is disabled.

  Although only a minor problem, it is very irritating and I would like to address them without causing other problems. Does anyone else have this problem? Someone has fixed it successfully?

  Hello Peter

  If I understand correctly, you use your usual laptop for daily work and you don't need any computer high-performance notebook. If I'm right I have to say that you should be happy if the laptop works well and stable.

  I don't really see any reason why you wanted to update chipset driver. In any case, you should try to roll back the BONES of time earlier and I hope everything will work again. There is absolutely no risk, and you can test it.

  Please post the result.

• Desktop computer does not display the computers on the network after waking from sleep.

  Both computers work on Vista Home Basic. Problem started after computers, the router and a DSL modem has been turned off and unplugged. After the awakening of the day before, the Office would display only the router and the laptop, but the way that he could not establish. Initially, a reboot of the desktop computer has solved the problem.

  Reset and re-installed the router. The three elements of the network were visible after the start, but IE 8 soon at the opening of the homepage. Again, after "standby" mode, only the router and the laptop displayed.

  After additional restart, only the router is displayed. The laptop shows all three elements and accessing office files.

  Suggestions?
  Mike

  Hi Syed,

  I did a full reset/reinstall the router, carefully following the manufacturer's instructions. Both computers are displayed in each of their respective lists of network, even after waking up from sleep mode.

  This issue is resolved.

  Thank you

  Mike