Satellite M30-107: Mat * a UJ - 820 s read burn CDs

Someone knows why. I tried different burning programs made no difference. Works on any pc/laptop on the planet except this laptop! It shows up as a blank cd!

any ideas?
Thank you

Hello

On this path, it is not easy to talk a lot. You have the same problem with the original audio CD?

By the way: what kind of data is burned CD (just the film data, audio CD),?

Tags: Toshiba

Similar Questions

  • Satellite M30-107 does not start successfully after using recovery disk

    Hello

    I recently got my hands on a toshiba Satellite M30-107 laptop second hand and decided to freshen it.
    I used the toshiba recovery disk, but after that the laptop is no longer support windows.

    When turned on it shows booting Toshiba disc for about a second then goes to a screen blank and freezes.
    When turned on, once again, a screen will appear an error by stopping and offer the opportunity to start in SafeMode etc but choose one of the options causes the machine to freeze.

    Any help or advice would be much appreciated.

    Thank you
    JT

    Hello

    Sounds a little like the laptop does not start because of the problem of Windows software
    You did not recover the M30 with the original Toshiba that was provided with this device M30 recovery CD?

    I may be wrong, but to me it looks like a recovery CD incorrect has been used and an image with drivers not compatible m has been installed

    You can try to install the OS of Microsoft Win XP original CD and could check if it would be possible to get the notebook ruin using own BONE.

    In this case we (you and me ;)) might know if this problem could be related to hardware or software.

    Good bye

  • Satellite M30-107 - guard wireless disconnect and never connects

    My Toshiba Satellite M30-107 with Intel (r) PRO/Wireless 2200BG Network connection is not connect wirelessly. I know that there is no hardware problem, because I used this laptop to different wireless networks in the past, and just recently I formatted my laptop using the recovery disk Toshiba gave with it.

    I set up the wireless entering the SSID and network key. But the wireless connects with the Excellent signal is only for a second and then disconnects, then reconnects, disconnects. After doing this for a while, it remains offline.

    How can I do to connect and stay connected as it should?

    It is not easy to say why all this happens. I also think that your laptop works well, then maybe you should check the router. Reboot the router and check the WLAN connection again.

    For a moment turn off WLAN protection and check if the same problem happens without entering the network key.
    Setting router to run on 802. 11 b / g only and check again.

    Play with these settings. Have you bought a new router? I mean if everything was OK in the past I m wondering why you are facing this problem now.

  • Satellite M30-107: the DVD Supermulti drive burn DVDs?

    I have a Satellite M30-107 P - M 745 / XP HE / 512 MB / 80 GB / 15.4WTFT / DVD SuperMulti / WiFi.

    His CD/DVD player is described as: DVD Supermulti drive compatibility: CD-ROM, CD - R, CD - RW, DVD-ROM, DVD-R, DVD - RW, DVD + R, DVD + RW, DVD-RAM
    Maximum speed: reading: CD-ROM 24 x, 24 x CD - R, 12 x CD - RW, 8 x DVD-ROM, 4 x DVD-R, 4 x DVD - RW, 4 x DVD + R, 4 x DVD + RW, 2 x DVD-RAM / writing: 16 x CD - R, 4 x CD - RW, 8 x HS CD - RW, 4 x DVD-R, 2 x DVD - RW, DVD + R 2.4 x 2.4 x DVD + RW, 2 x DVD-RAM

    Can I use this disc in WRITING ("burn") the DVD and if I can, I need any special software and what type of disc can I use.

    I would use it to back up the laptop.

    Thank you.

    Hello

    Why you ask? You have published the specifications of player and according to these specifications of hardware of the player are able to write on 16 x CD - R, 4 x CD - RW, 8 x CD - RW HS 4 x DVD-R, 2 x DVD-RW, DVD + R 2.4 x 2.4 x DVD + RW, 2 x DVD-RAM.

    For me it s case. You can write data and files on the DVD s
    I use "Nero burning ROM" software to burn it to CD or DVD. In my opinion it's the best program and very easy to use.

  • Satellite M30-107: WPA and WEP security software

    I want to connect my Satellite M30-107 P - M 745 to a network of wifi MIMO inverters to date.
    I bought a router and a PCMCIA adapter.
    I wish security WPA and WEP setup - I need any special software Toshiba on the PC itself to do so, or simply use the software that came with the router and adapter card?
    Thank you

    Hello

    There is no software Toshiba for the WLAN settings. Toshiba has created the only monitoring software called ConfigFree. By using this software, you can watch the WLAN and LAN connections. This software can also help you identify a connectivity problem if occurs.

    Back to your question: for WLAN settings, you can use the standard Windows WLAN settings or use WLAN data by software adapter settings. Please, make sure the wireless network adapter supports WEP and WPA encryption and also make sure you use the right settings on the router.

  • Function FN keys don't work no-Satellite M30-107

    Hi all

    I have an old M30 - 107 that I recently reinstalled and updated the operating system.
    The function keys control the screen brightness, volume etc. do seem to work.
    I think that I've updated all the drivers for the laptop.

    Is there a specific driver (ie the chipset driver package) I should be looking that control these function keys or should they train with intervention of Ant in a pack driver bios etc. related?

    Satellite M30-107 XP edition SP3

    Thanks in advance... C.

    Satellite M30-107 is a part of the PSM30E series. Is this good?
    You can see this number when you look at the bottom of the unit. There should be a label with the model number.

    Go to the page of European driver of Toshiba and searching for archiving.

    Choose + Archive-> Satellite-> Satellite M Series-> Satellite M30-> Win XP +.

    You must download the * common Module *.

    This common module must be installed first!
    Then, you need to install additional software like Touch Pad on / off utility Hotkey utilities for display devices.

    These programs will allow the Fn keys

  • Satellite M30: Mat * a UJ - 820 s read DVD but not CD

    I have a Toshiba Satellite M30 and I have problems with my carpet * CD/DVD UJ - 820 s player.

    I had to do a full restore due to a virus problem, and now the reader can not read any CDs.
    I can read movies DVD and load/use of programs to DVD but when I try to use any media CD (load programs, play music CD, burned CD playback) it gives me the error "D:\ is not accessible. Incorrect function. »

    I looked on the forums and have tried to remove the drive from the hardware Manager, tried to change control of the IDE and have downloaded the latest orders that I could find.

    Any help please!

    Hello

    tried a Firmwareupdate for the reader? At this address you can get the latest update if it is not already:

    http://Forum.RPC1.org/dl_firmware.php?category=15&manufactor=18

    So if the problem persists, then your only option would be to contact a local service partner. They will probably check your disk for physical errors.

    Welcome them

  • Re: Satellite M30-107 - new compatible CD/DVD player

    Hello
    I need to find the DVD player that is suitable for my M30-107 sSatellite, can someone help me please?
    What is Teac dv-w22e?
    The original was Mat * a dvd - ram uj820s, but do not know where it would be possible to get it from...

    Thank you very much for your help!

    Hello

    (Page 4 to page 7) user manual contains information on the supported players!
    Looks like you didn't she check properly.
    This readers seems to be compatible:
    * UJDA750 *.
    * SD-R6012 *.
    * UJ-811 *.
    * DV-W22E *.

    You can find this number in google to get a...
    Otherwise, you may contact the ASP in your country for this player compatible

  • Satellite M30-107 - will not power

    Can someone please help?

    I currently have a problem with my M30-107, model PSM30E-7101V-7U, it lights or boot. All I get is the 'sector' and 'Power' light on the façade and the 'power' of light the multimedia button on top, no beeps or noise from the fan.

    One thing I noticed is if I disconnect the HARD drive and turn on the LED of the drive HARD rest turn on, and if I disconnect the DVD player light so that it lights up a second then turns off. Perhaps it is a feature of the model and part of pre-boot BIOS checks - do not know.

    At first I thought it was a fault with the motherboard, so I bought an exact replacement, including the USB ports, AV output, network & modem ports and socket connector DC with PCB power distribution, and even the speakers have been replaced! But it made no difference. Still only get the 'power' & 'Power' LED on.

    Then I tried to replace the CPU, but still the same. I also tried different RAM in different locations, new modem, removed card network wireless and fitted with a panel of media replacement keys - No difference. Disconnect the LCD screen, DVD player and HARD drive does not seem to make any difference either.

    Tonight, I tried capture the wires on the fan and splicing in a new fan using the existing record (I only had a spare with the right connector fan), but that made no difference. I also replaced the battery CMOS with a constant 3v DC supply - but still no luck. He's really starting to annoy me now :-(

    I just finished checking the tension of the PCB power distribution, and it seems to provide the motherboard with a constant voltage. I have ran out of ideas now.

    Everything has been replaced with the exception of the keyboard & touchpad and the CD key and indicator LED Panel on the front of the laptop.

    Anyone has any ideas what to try next? Any advice would be appreciated, I'm starting to pull my hair!

    Could someone also tell me the function of the small black chip that is mounted just below the LDC screen inside the lid of the laptop - part number 040-0004-946 Foxconn. I have not replaced either, but if I knew what it was I could be able to test it.

    Hello!

    Which is really strange, buddy! :(
    Have you tried another AC/DC adapter on this laptop? This is maybe causing this problem and so the laptop can start t properly check it!

    To be honest, I think the best way is you go to an authorized service provider. You need professional help, and the technician can check your laptop to determine the cause of this problem.
    This problem can't be solved in a few minutes, but it should not be a problem for a technician to the laptop.

    Good bye

  • Satellite M30X and Mat * a dvd - ram uj-8205 burning problems

    I have Satellite M30x and Mat * one year dvd - ram uj-8205. On the beginning everythinks worked very well, but in the last months of 2-3 that it cannot reads some CD and have problems with CD burning
    I restarted the laptop with the recovery cd, but still the same problems. Before robooting, I used nero 6, thougth perhaps, this is the problem in nero, now using just Sonic record now accompanies the DVD.

    Please anybode help me?

    Hello

    How to help you if you don't mention what CD cannot be burned (original music CD, homes burned CDs, just specific producers, only some files are not readable). Give us more info on this issue.

    Check a little better, and if there is no success is perhaps the defective drive. It is well known that some CD (a cheaper) cannot be burned properly.

  • Satellite L655-12 q - CD/DVD-rom can't burn CDs

    Hello

    I use a Satellite L655-12 q, model number short PSK1EE.
    It has a tsstcorp CD/DVGW, type ts-L633c. My rom reads and burns DVDs fine, but can not read or burn CDs, especially when the size of the files involved is small.

    Can someone please help?
    Thnx.

    On this virtual path, it is not easy to say what is wrong, but if there is problem with playback too, it may be a malfunction of the equipment. Perhaps more calibration doesn t the goal and objective cannot be placed in the right position to read/write CD.

    Warranty is still valid?

  • Satellite M30-107: I/o error and impossible to copy data

    I'm trying to back up my data to DVD blank and I "Draq n drop" software to do as well as other kinds. Insert the blank dvd - R and dvd + R disc, and nothing happens. It does not seem to recognize.

    When I try to open it from the dvd icon this message sometimes "demand impossible because of an i/o device error. I a super multi drive which should read all kind of cd and DVD but something is wrong." I went to my computer and double click on the icon and under the recording tab, I clicked on "Enable recording on this cd player" I dragged then records in the dvd and it seems to have worked, when I inserted the dvd then it doesn't let me open it...

    Could someone help me with this please? I'm not too good with computers and I had it for two years and this is the first time that I am trying to back up my files and I can't do it.

    Thank you very much for your time.
    JC

    Hello

    Drag & drop is not bad bud, I advise to use the software "Nero burning rom" to burn the DVD.
    This software supports many burning options and allows you to burn the middle with best performance.

    Additional you need to know that the player doesn't support not all CD or DVD of all brands.
    In the user manual, you will find a list of compatible CD DVD manufacturers and supported.

    But please don't be confused about the unfamiliar names like IE Mitsubishi.
    Manufacturers and not sellers as TDK. Do not mix manufacturer and seller!

    Best regards

  • Satellite M30-344: Mat * un UJDA750-> DMA Mode?

    Hello
    run this DVD only in PIO Mode drive? I can't find any way to change that - not in the BIOS and devicemanager.
    Uwe

    Hello

    As far as I know the type of device parameters are set to automatic detection and the transfer mode should be set to DMA if available

    You can check in the Device Manager. Please select the primary and secondary IDE channel. Go to properties and select the advanced settings

  • Start on Satellite M30-107 error message

    I get the following message when you try to start:

    Windows didn't start because the following file is missing or damaged
    \windows\system32\config\system
    You can try to repair this file by starting windows setup using the original CD-ROM. Select 'r' setup in the first screen to start repair.

    What is causing this error message I did nothing that should have caused an error? I can't repair using the Setup disk under windows XP was preinstalled when you buy. Any ideas please?

    Hi Linda,.

    This message is quite common and can indicate that there is a problem with your hard drive. It is always possible that the file quotes was too written or damaged by another application on your laptop but from my experience, it's pretty rare.

    The Windows repair console is available if you have a copy of the original Windows XP installation CD, but if you have only the recovery CD provided with your laptop then this option will not be available from the recovery CD contains only a restorable copy of your operating system that you can use to restore your system. This, however, will delete all your personal data from the laptop.

    If you have access to a standalone utility such as Norton Disk Doctor so I would recommend that run you a scan of your hard drive to determine what state it is in.

    Kind regards

  • Satellite M30 - possible repair broken?

    My father seems to have broken his laptop (Satellite M30-107), which is the model above.

    When you press the power button it turns on but there is no sound what it is running because I expect. There's no display on the screen. Also the cd drive does not so much need to open manually.

    If I button green light comes on to show so you have power to the keyboard.

    I tried to connect an external monitor, but that does not work either.

    Does anyone have any other ideas I could try? Or know where I could take it to be fixed because it's about 1 week out of warranty :(

    Hi Martyn,

    The first thing to try is to remove the ca cable and also the battery so that the laptop is completely isolated from any power source, then leave it for 5-10 minutes prior to re - attach the cable ca.

    Try turning on the laptop so normal and if you have the same problem then discopnnect the AC cable and install the battery and try again feeding.

    If the laptop still does not power on then it is likely to be a problem with the motherboard that will have to be checked by an authorized service center.

    Kind regards

Maybe you are looking for

  • Impossible to mount a disk image

    Hello world It is impossible for me to get any new or old picture disc. That is to say: all of a sudden none of all the files on my disk *.dmg can be opened. Anywhere on internet I can find a solution to this problem. Would you be kind enough to help

  • Satellite A300: TRDC reminder & Toshiba Recovery Disc Creator works after upgrade to Windows 7?

    Hello I'm sorry for the bad English.Satellite A300.Has performed the update to Win7 upgrade Toshiba program. This program works;TRDC reminder and Toshiba Recovery Disc Creator after update to Wins7? The TRDCReminder program found no "revival of the c

  • can I create a DLL file for labview that has DLL library with inside?

    Hello everyone, I am developing an application for the cards PCI devicenet in labview (beginner to labview) environment.  Is there a DLL file for the PCI card from the provider. But it's too complicated for a beginner to call each function in the DLL

  • D110 printer external IP range

    Dear friends... I have a problem sending prints to my printer. I can't even open the printer admin page. I have suscpect that the reason is due to the range of IP addresses. Grateful if you could help me. Here is the configuration. My laptop connects

  • Reading data from txt file and move the engine for the data

    At this point, I had the table and I already read txt file and I want to read the data in table and separate the corresponding element in 3 parts (3 axes: X, Y, Z) and I was able to make the transmission of data to move the motor in this position. an