Satellite M30-113 does not work well when I use FreeBSD 6.2

Similar Questions

• On the Satellite P500 microphone does not work well

  I spent $2,000 to buy this Satellite P500 a month ago and soon found that the microphone does not work well. I used the web camera application to record a video to test, the volume level is very low that you barely hear it and it cracks.

  I called the support center, waited for half an hour and finally had someone to talk to me, I followed his instructions adjusted the level of the microphone to 100 and the boost to 0.
  The cracking sound disappeared, but the level of volume is still too low to hear. What can I do?
  Call again and wait half an hour? His Friday 17:00, they will be upset and I'm already mad!

  Hello

  Have you tried to test mic with Skype or a similar application. Friend of mine has Satellite P500-127 and he use it for Skype communication.
  I can hear it fine and everything works fine.

  Do you still have the factory settings (original operating system preinstalled)?

• My screen touch iphone 5 does not work well when charging. Please someone help me

  Members of the apple, Hello

  When I'm using my iphone and he is in charge the touchscreen does not work well

  Why apple made this feature on ios?

  Try

  http://support.Apple.com/en-us/HT201559

• Satellite M30 - keyboard does not work

  Hello

  I have a problem with the keyboard of my laptop:
  Since I was able to type the password of the BIOS, it should be correct from a technical point of view.
  But once having written the pass BIOS keyboard no longer works. It just doesn' react - it is even impossible to hit F2 to open the BIOS menu.
  XP / system displays all hardware conflicts.
  The laptop do not fall down or something like that.
  I bought a USB keyboard, and it worked correctly from the start.

  I tried every shortcut I know and a lot I didn't know until now, but it still does not work.

  Is there a shortcut XP or Toshiba to disable the keyboard?
  Or do you think this could be a hardware problem - but why it should be possible to write the password...?

  CU
  Matthias

  [Edited by: admin on 22 July 05 18:02]

  (1) your bios can recognize an external input device and causing the keyboard not working after giving you access.

  (2) remove all other usb devices you have connected (mouse, webcam or other) because they could be interpreted as an external keyboard

  (3) if there is no USB device connected and the problem persists... remove your keyboard drivers external usb while you plug it (remove drivers dethrone device) and before you restart your computer, make sure to remove the external keyboard.

  (3) you can have a software virus recorder or a keyboard that connects to the interruption of your keyboard.

  If none of these permits, try to boot in an o/s different as the knoppix linux that runs directly from cd without need of installation. If your keyboard did not always works, then bring it to support, because the internal flat cable might came down in part.

  Good luck

  George

• Microphone does not work well when recording video to work

  For the last few months, my phone has this kind of problem whenever I wanted to record a video. The audio in the recorded video may not be heard clearly, even with the highest volume. There sounds caring as wind noise even though I'm far from any source of wind such as fan, or when recording. At first I thought it was problems with the listener; probably I had disconnected the wrong way. But after trying a few times, the result is always the same. When I tried to record audio using voice memos, the audio is properly can be heard. This problem only occurs when you record a video. Please help me.

  Hi afiqahroshidi,

  Please visit Apple support communities.

  It seems that your iPhone does not record clear audio as well as your videos. It seems that you have identified that the background microphone (used to record voice memos) works, according to get help with microphones on iPhone, iPad and iPod touch.

  Then, try the following steps, coming from the link above.

  If audio video recordings of soft sounds, or Siri can't hear you, ensure that the microphone near the iSight camera - corner of your iPhone on top, bottom, the receiver is not blocked or covered.

  If the microphone and the receiver are not blocked:

  Get help

  If you still have questions after you test the microphone on your device, try the following steps:

  1. Unplug any accessory plugged into the headphone jack.
  2. Avoid blocking the mic microphone and iSight with your fingers while holding the device or video recording.
  3. Remove the protection of screen, movies or cases that cover the microphone, microphone iSight or iPhone receiver.
  4. Clear all debris from the microphones or receiver iPhone. Refer to the manual of your device on the locations of the microphone.
  5. Restart your device.
  6. Make sure you have the latest version of iOS.

  If you have tried these steps and people still can't hear you on the phone or FaceTime calls or Siri does not hear your requests, contact Apple technical support.

  Best regards.

• Light does not work well on my Satellite A660

  Hello

  I have a problem with my Toshiba Satellite A660. The brightness of my screen does not work well, when I try to increase the brightness, it goes down, I mean is dimmed.
  I try to reinstall the drivers, but continue it problem. Anyone know what I could do?
  Thank you very much

  Stand by. I put t know how you try to change the brightness of your screen, but I would like to know if this work when you use FN + F6/F7 or when you change the level of brightness in power intend that you use (power options).

  Are you using the original pre-installed OS that you got with your laptop or your own installation of the OS?

• Integrated on my Satellite T130 webcam does not work

  Hi all

  the built-in on my Satellite T130 webcam does not work.

  I use Windows 7 Home Premium and already reinstalled the drivers of webcam 64-bit through this Web site. However, when I click on the webcam application, simply, nothing happens - program doesn't open at all or turn off instantly. Skype is not also acknowledge a cam. In addition, there is no webcam in Device Manager (a not detected USB device however) and no symbol of cam in the Ribbon of Toshiba quicklaunch, which is like the camera is started according to the "manual".

  Someone has an idea what is the problem? Looks like a common problem according to Google, but no suggestions other than to reinstall the drivers. Perhaps another application blocking the camera? Firewall settings?

  I'd appreciate any help, thank you.

  Best regards Florian

  > a USB not detected if

  Maybe it's the webcam from the webcam is connected to the internal USB controller on the motherboard.

  It looks like a webcam driver is not installed correctly.
  Try the webcam driver released for the satellite t230 or other series of satellites.
  Versions are newer

  Also recommend that you check the BIOS settings.
  In some cases, the BIOS contains a webcam option where the webcam can be turned on and off.

• Keyboard does not work well

  Hello!

  The qwerty keyboard on my aqua m4 xperia phone does not work well, when I try to register somenting words aren't apears... I need to close a re message open a few times so I can sign up, but it is really annoying to do this every 10 minutes

  Am I the only one who have problems with this?

  PD. I'm from Mexico and my English int ' good t... Sorry for that

  @Ivan_valdez94

  It is a third party acting upward application

• P850 satellite and a WiFi - internet connection does not work well

  Hello

  My internet connection does not work with a Wi - Fi connection.
  I have laptop Satellite P850-131, which I bought a few months ago and I noticed that over the past two months the internet connection does not work well. When I connect to the computer shows that I am connected Wi - Fi connections, however there is no connection and I can't access the internet.

  I tried to do all the regular search but nothing works. Sometimes the message I get told that there is a problem with the DNS and other times with the IP address. However, with other computers I didn't have any problem at all to connect to the same Wi-Fis.

  All solutions?

  > When I connect to the computer shows that I am connected Wi - Fi connections, however there is no connection and I can't access the internet.

  If such a problem would appear again start the console (window BACK in typing CMS in search)
  Here, use the command * ipconfig / renew *.

• my iPhone 6s has problems with the GPS when I use some applications, it does not work well and give especially the bad road. Can someone help me?

  my iPhone 6s has problems with the GPS when I use some applications, it does not work well and give especially the bad road. Can someone help me?

  My iphone 6 has started having the same problem. Its literally the GPS. Saying that it does not find me at all. Ive seen say location for more than an hour in the suburbs of chicago. It started to happen to me after I downloaded the latest update for the iphone. I hope they react and let you know what is happening because I'm dying to know as well.

• My touchpad does not work well on Satellite C55-A-1ND

  For several days my touchpad does not work well. It has nothing to do with the power touchpad button on the F5 key.

  The touchpad is most time does not and something a bit but I can't use the touchpad at all now.

  When I attach my external mouse on my laptop I can use my laptop otherwise I can't use my laptop.
  I already rebooted my laptop several times, but it helps not at all.

  I hope someone can help me!

  You said that this issue has nothing to do with the touchpad on/off function s.
  So what's exactly wrong with the touchpad? Is he disabled or enabled?

  Have you checked the settings in the control panel-> mouse-> last (device settings) tab-> settings button?

  Have you already tried to reinstall the software/driver for touchpad?
  If this is not the case, do.

  By the way: what model of laptop and what system you have?

• Re: Satellite A200-1AE does not work

  Hello!

  I have Toshiba Satellite A200-1AE computer that does not work.

  I use (d) for educational purposes and now the problem is that it will display no signs of life. the blue led light on the front of it does not illuminate when I connect it to the AC/DC adapter.

  I tested the AC/DC adapter with a voltmeter (it came with the computer in the box of the card when I bought the computer) and it works well.

  Yes, the battery could be dead also, but it should work just fine without it and is not.

  What to do about this problem?

  He has a dead motherboard? No, I can't be brave enough to think about.

  Help, please.

  Thanks in advance for your reply,

  Goran

  Hi Goran

  Everything is possible... also a dead motherboard.
  But to make sure exactly what s laptop computer checking is necessary.

  So, you will need to contact the ASP in your country for the control of the laptop.

  Good luck

• Keyboard seems as if it does not work well

  Hello

  The brand of my laptop is Acer
  The product name is Esxtensa 5220.
  My Windows system is Ultimate(64Bit) 7

  I haven't installed a keyboard/mouse driver software when I installed Windows 7 because when I looked on the official website of Acer, I found no drivers keyboard and mouse for Windows 7(64Bit). Thus, Windows 7 was installed their automcatically just at the moment where it was installed. I didn't install any software dirver keyboard and mouse at all.

  I really see that my keyboard does not work well by tapping it. Sometimes I see another letter is typed though I haven't typed it.  In addition, the pointer of the mouse jumps sometimes to another location in the text box (for this text box for this forum) while typing which results in the insertion of letters in another place, other than what I want that they should be inserted.
  I don't know what it is, but I will say.
  When you type 't', so I sometimes see that another letter is typed rather instead. Also, sometimes while typing in the text box, a text, I found that the mouse pointer jumps to be placed in the middle or from the text, if the letters are written in the other place, other than I want to be they.

  So, is there a driver or a program associated with it for keyboard should be installed?

  It's shows in Device Manager that keyboard and mouse driver installed, Windows 7 was installed their automcatically just at the moment where it was installed. I didn't install any software dirver keyboard and mouse at all.

  

  Thank you very much.

  I tried install driver TougchPad of Snyaptic, which is specific for laptop HP Clubhouse anthter of my friends, so I'm satisied with the result, I've found so far, but the mouse has been updated only. In addition, I don't know if it's OK or it is some problems might occur in the future with driver not designed for Acer laptop.

  

  However, the keyboard is still with the driver of the lunch Manager.

  PS: I think that there is something bad goes with the download of the images through this forum, so I think that admins should find a sloution.

  I don't really see your screen shot post lately.

• problem with NFS MOST WANTED... car does not work well

  Hey... I installed NFS MOST wanted on my laptop a long time ago... and 2 days ago it was working properly, but now during acceleration cars, its noise is too loud, and it does not work well or normal...

  Nobody understand my problem... plz suggest me...

  Try a system restore to when it worked:
  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  Check the reliability monitor to see what changed between where he worked and where you have noticed the problem:
  http://Windows.Microsoft.com/en-us/Windows7/how-to-use-reliability-monitor

  In particular, if there is no driver updates, try to back off:
  http://Windows.Microsoft.com/en-us/Windows7/restore-a-driver-to-its-previous-version

• How can I activate an older version of Photoshop that I have loaded on my new tablet? Web activation does not work, and when I call the number, it is said that it is not longer used. In the meantime, I'm up to 13 days until it stops working due to not bei

  How can I activate an older version of Photoshop that I have loaded on my new tablet? Web activation does not work, and when I call the number, it is said that it is not longer used. Meanwhile, I'm 13 days until it stops working due to not be enabled. Help?  I really need to continue to use this product for my home business. It works very well not activated but the threat is that it will stop working in 13 days more if I don't get activated, and none of the activation methods that they list seem to work.

  You can download CS2 if you have a valid license for CS or CS2.

  And you have to follow the instructions and use the download again AND the new serial number.