Satellite M30-604: unable to connect to the WLan

Similar Questions

• Satellite A500 - 03P: unable to connect to the WLan using Win 7 + event message

  Hi all

  I recently bought the Satellite A500 with the offer included Windows7 while he was available late October 09.

  So I had the Toshibe DVD for the upgrade and followed the steps and Visa home premium upgrade to Windows 7. Now I have two questions.

  (1) I get a system event Notification after start, talk to me about the system event log. The full message is below.

  Unable to connect to a windows service
  Windows could not connect to the System Event Notification service. This problem prevents limited users to logon to the system. As an administrator, you can view the system event log to see why the service failed

  (2) I was able to use this laptop for the internet before the upgrade, both via a USB wireless drive as well to the office via a DSL modem.
  Now I can't access the internet after the upgarde of Windows 7!

  For example the Optus dial-up box pop up appears commandeLorsque I click on 'connect', it does not connect.

  Can anyone help please?

  Thank you
  C I

  Hey Buddy,

  (1) did you check the Configuration of the Service for this service? The Boot System Event Notification Service type must always be set to automatic. This service is absolutely necessary for Windows and shouldn't t be disabled or set to manual startup type.
  Check it!

  (2) to be honest I never heard on the internet BEFORE, but normally, it should also be possible to access the Internet with Windows 7.
  Make sure that the WLAN or LAN card is installed properly and check the TCP/IP settings. If you are missing some driver you can get on the page of Toshiba.

• Satellite Pro M70: Unable to connect to the WLan with ConfigFree

  Salvation in the Forum.

  I have problems with a satellite Pro M70, about gaining control of wireless connections.

  When I scan with "The Radar" I have ConfigFree for available wireless accesspoints, I get several points available, but it is not able to connect to one of them. I can read their status and see their marker of WEP encryption.

  When I try to connect to one of them, I get a pop-up dialog, that said (translated from Danish) 'suppliers another software is in control of the wireless network card. When you try to configure a connection through the classic way to windows, windows States that "windows is not able to configure this wireless connection - if you have another program to manage wireless connections, you must use it". I guess it refers to ConfigFree...?

  Is the unnamed "other provider" associated Windows or perhaps associated McAfee (Security Suite 2007)?

  If you are familiar with this problem or something like that I'd be please to know.

  Also - where can I enter keys for WEP encryption for my friends in ConfigFree WLAN routers?

  > Trying to make a connection through the classic way to windows, windows States that "windows is not able to configure this wireless connection - if you have another program to manage wireless connections, you must use it". I guess it refers to ConfigFree...?

  It should not be a ConfigFree. According to you, an Intel ProSet utility or a Client Atheros wireless network adapter might be controls the Wlan configuration!

  Please check if one of the two control the WiFi network tools and turn off!

  > where can I enter keys for WEP encryption for my friends in ConfigFree WLAN routers

  You should have three different tabs in the utility Configfree.
  The second device settings provides the list of devices, and you should see the wireless network connection.
  Choose and use the button network connections.
  There you should find some encryption settings!

  Also check the profile settings tab and the option called security settings

• Satellite Pro 6100 - unable to connect to the WLAN router

  Hello

  I brought a 2nd hand Satellite Pro, model version SP6100 (PS610E-029ZV-EN), P4 1.7 Ghz, 512 MB, 30 GB, with Windows 2000 Pro loaded.

  I can't connect to my wireless router. The switch is in the correct position.

  I want to change to XP using the key provided with the new laptop (dual OS) however I can't reformat using a XP disc at the start up or if I use the recovery cd (start with holding C and let go when he works up) it starts but displays 'specification drive not valid' three times and charges Win2000.

  Can someone advise how (or if!) Can I reformat I want?

  Any help will be greatly appreciated.
  See you soon.

  Are you sure that the wireless network adapter has been installed in the laptop?
  Check in Device Manager

  On some series WLan is optional. This means that the WLan card is not installed, but it is possible to install an and, consequently, the laptop contains the WLan switch.

• Satellite L505-144: unable to connect to the Wlan 802.11 N

  Hello, I hope someone can help me with this

  I've updated my old network wireless at home so I can stream media.
  I replaced my old netgear G router and bought a netgear DGND3300 dual band N router to the hub and a WNDA3100.

  Office everything is set up ok on these as I can connect up to 300 kbps, which is good.
  The current settings for the router are:
  Up to 130Mbps at 5 GHz & 54Mbps 2.4 GHz"
  channel 36 = N
  Channel 11 = G

  Although the problem is the laptop.
  Now, he says that the wireless laptop is N. When I connect to the router it connects only when G setting and I only have until 45 Kbps.

  Is there a way so that it can connect to BOTH channels to get the full speed or the wireless laptop is only a single tape device?

  Thank you
  Steve

  Hello

  Built into the laptop LAN card is a Realtek RTL8191SE 802.11bgn.
  As you can see the wireless network card supports three WLan standards; 802 11 B, G and N.

  First of all, you must make sure that more recent Wlan driver is installed;
  New WLan driver can be found here:
  http://APS2.toshiba-tro.de/WLAN/

  In addition, you should check if 802.11 N standard has been chosen.
  You should do this in the Device Manager-> card WLan-> properties-> Advanced tab.

  Welcome them

• Satellite C665D is unable to connect to the WLan

  Hello

  My in-laws are staying with me and their C665D does not connect to our wifi network.
  I can't turn on the wifi settings.

  I looked in to network adapters Device Manager and there is no present. I tried to add a new device through "manage wireless networks" and he says "Wireless is not currently enabled.

  If I try to manually add a wireless network it comes up with 'windows wireless service does not work.

  Look forward to some help on this one

  The error "the windows wireless service does not work" indicates that the Wlan service has not been started.
  Why? I don't know, but you can try to activate this service first.

  To manually start the wireless service, i.e. the WLAN AutoConfig service, perform the following steps:

  1. connect to the computer as an administrator.
  2. Click Start, type services.msc and press to enter.
  3. Locate the autoconfiguration WLAN service, double-click to open its properties window.
  4. on the general tab, change the startup type to automatic and click on the Start button.
  5. click on apply, then ok.

  Then try to connect to the wireless connection and check the result.

• Satellite A110-195 unable to connect to the WLan router

  Hello

  I have a wifi router and I have connected my laptop and it worked wery well but on low there is I could not conect to router but woudn't ip address pop up. Internet access was not.
  I am connected to the same router another device and it worked...

  Hello

  Believe me, there is no general solution, you must check all the settings of your operating system

  First of all that I recommend to check the parameters of the TCP/IP protocol if everything is settled automatically on.
  Then check if you are using encryption parameters right as standard (WEP, WPA, WPA2) encryption and the encryption key.

  It s also advised to reinstall or update the Wlan card driver

  If you used the windows own WLan configuration, I would recommend testing as Atheros Client utility or Intel ProSet Wlan client configuration utility. But it depends on the WLan card what client WLan configuration utility can be used

  concerning

• Satellite L300-1AQ unable to connect to the WLan

  Hello

  I'm a novice at computers so any help would be grateful.
  My husband bought my laptop Toshiba L300-1AQ 5 days ago, I am trying to link up to my netgear router, when I look at my wireless network I can select my network as its signal strength excellent.

  But when I go to connect it just happens like windows cannot connect to my netgear Wireless association failed because windows did not receive response from the access point or wireless router.

  The wifi light is amber and when press FN + F8 the wireless is turned on?
  Please point me in the right direction im running on Vista Home premium.
  Device Manager my network card is showing the link of wifi wireless intel (R) 5100 that the device works properly.

  Any help please.

  Kind regards

  Shelley

  Hello

  The problem may be the router itself. Restart your router and try to connect again. If the WIFI network is encrypted be sure to use the right WIFI password.
  If nothing helps, please contact your internet provider. Make sure your router is good configuration.

• Satellite L300-217 - unable to connect to the WLAN

  I can see the SKY network, I am trying to connect to (5 bars). _I can't connect_ (despite having the network encryption key). The error message is 'user timed out' (he thinks little about when I press on connect)

  I have a connection of network wireless WPA Old Virgin that I can't remove. I hit delete and he disappears for a few seconds then comes back. SKY seem to think that this is the problem

  I have updated the Atheros wireless network cards so my Realtek

  Any suggestions? Thank you

  Hello

  What is SKY network? Is this normal router WLAN you have at home or what it is exactly?
  This network is probably blocking the new MAC addresses. If the MAC address of your wireless network card must be allowed on this router.

  I put t think the problem is your old WLAN connection. This doesn t affect other connections

  > have updated the Atheros wireless network cards so my Realtek
  What WLAN card you have exactly?
  You need a single driver because that one wireless network card is installed.

• Satellite L300-11th: unable to connect to the WLAN

  When I try to connect via WIndows - it cannot get an IP address. When I try to connect life PROSet - I get the message that WLAN driver is not installed.

  Driver for RTL8187B since the Toshiba site has been installed successfully.

  There is no Bluetooth in my model.

  Your laptop still has factory settings or you have installed your own operating system?

• My ZTE open C unable to connect to the wlan with 63-signs-hex key.

  Hello

  my C open from ZTE unable to connect to the wlan with WPA2-PSK and a 63 sign hex key. When I create a 2. ESSID with WPA2-PSK a sentence normal, everything's fine.

  Oliver

  Hi OliverwithZTE,

  I understand that you have connection problems to your network WPA2-PSK.

  Unfortunately, WPA2-PSK is currently not supported on Firefox OS version 1.3. Only WPA-TKIP and WPA2-AES are supported.

  -Ralph

• Satellite Pro L510 - unable to connect to the Internet

  Hi, a newbie on this forum so here goes. I got the "fix Windows 7" virus on my laptop because my virus protection that flows. I downloaded AVG which solved some problems, but still not back to the original values. I reloaded Windows 7, but of course I lost all the software preloaded Toshiba & now cannot connect to the internet (laptop computer purchased through the catch of the day).

  What I need to download software/drivers toshiba etc. to address this problem. Thanks for any input.

  Hello

  > now unable to connect to the internet
  Can you write more than one sentence about your problem?

  Does anyone know how you connect to the Internet via modem, LAN or WLAN? More exactly, what happens if you want to connect, you an error message or probably t can find the router?

  Sorry, but without this information there s no end of discussion

• Satellite C660-1NJ - unable to connect to the wireless network

  Hi guys

  I got a 1nj c660 and I have a wireless connection to a Fritzbox 7170.

  Now, this morning, everything was fine and I connected wonderfully, but now I can't connect no settings have been changed I just stop and start as usual. I used configfree and it shows the network but if I try to connect it says unable to connect to the network. I have Win7 home basic OS.

  I uninstalled the wireless network card and reinstalled, updated the drivers but nothing works, I still get the same error.

  Can someone help will appreciate it greatly!

  Hello

  Are you able to connect to open WLan?
  I mean you can try to disable security options in your Fritzbox and might test whether you are able to connect without the WEP, WPA or other safety standards.
  Of course, you should only done for testing purposes

  If this box works, then it means that the security of your router settings were not consistent with the settings of the Wlan card.

• Satellite M100-221: unable to connect to the home WiFi AP

  Unable to connect to the home WiFi AP. Impossible to establish connection (when using intel software Bundle, connection hangs on the authentication step.
  When using the connection and windows engine, it connects 3 times will come down on "acquiring network address").

  I downloaded and installed the latest drivers and updates to the BIOS, but it does not solve the problem. Other computers with equivalent settings to connect without any problems.
  Wireless AP DLINK 1000AP + type b Wi - Fi.

  What is the problem?

  Hello

  When I have this kind of problems, sometimes by turning and the AP help.
  Or try to change the authentication or encryption settings.

  Good bye

• Satellite Pro A40 can't connect to the WLan using the Win XP

  Hi all

  Newbie on your site so thank you in advance for your answers ;-)

  Picked up a Toshiba Satellite Pro A40, completely formatted and installed a legal XP Pro.

  Trying to connect to the internet using a Netgear wg511 card works on my other laptop, it will not connect even though I installed the driver for it?

  It comes up with 'limited or no connectivity problem occurred because the network has not assigned a network address of the computer.

  Any ideas please?

  Thanks Mike

  Hello

  First of all, you must update the WLan driver.
  I put t know what wireless network card has been installed, but you can find WLan card details in Device Manager-> network adapters.

  In addition, I recommend to disable all the security settings on the router and then try to connect to the wireless network.
  If you will be able to connect to the Wlan, you can enable security settings (Wlan encryption, mac address filtering, firewall, etc.) again.

  Last but not least, you can try to use this command in a DOS (CMD)
  Ipconfig / renew

  Big names