Satellite M30-801: CPU only works with a 600 MhZ

Similar Questions

• Satellite A210 - 10 c only works with the 800 Mhz instead of 1.6 Ghz

  Hello

  I have a very big problem. One day, I look in Vista on my resource monitor and see that the max freuquence is only 50%.

  So first of all I think that is no problem because the assets 'energy savings' energy recorded.
  I have a Satellite A210 - 10 c portable.

  So I switch to maximum power and perform a test of prime95. But hell, the max freuquence has not changed. I also installed everest and cpu z, but all programs show the same to me:

  My laptop only works with the 800 Mhz instead of 1.6 Ghz!

  I'm looking for drivers for the AMD processor, but you need not for Vista. Update all the drivers of Toshiba and Programms and BIOS (in fact, it is the 1.9).

  Nothing helps.

  As a last test, I reinstalled Vista, but also did not help.

  And now I'm at a loss what to do.

  I hope someone can help me.

  Good bye...

  Have you installed the Vista using the recovery CD or the original CD of Microsoft Vista?

  I ask because the restore CD contains all drivers for Toshiba and yellow exclamation marks should not be apparently in Device Manager.

  If you used the original CD of Vista I think that you have not installed the Package of Intel Robson.

  I found the package of Robson on the Toshiba driver-> Satellite P200 area page.

  Maybe you should check this.

  Your comments would be appreciated

• Qosmio F10-105 only works with the 600 MHz

  Hello

  My f10-105 run only @600 Mhz! in the bios and in power options I have select provincy.
  the verse of the bios. East of 1.20
  someone at - it an idea?

  THX

  Hello

  Usually after the replacement of the motherboard, it may happen that laptop runs just at 600 MHz. In this case you should contact the Service partner. The firmware must be written again. If the partner doesn't to do this, the machine runs at a speed fixed Service 600 MHz.

• Satellite M10: CPU only works with 599 Mhz

  Hi all

  Just managed to change the motherboard in my after former M10 it had a power failure.
  He tells me now that my processor is clocked at 599 Mhz instead of 1.4 Mhz.

  Is the processor had it as well?
  Any ideas, thank you.

  Jay

  Hello

  It of simply the case; the firmware must be updated!
  After replacing the motherboard ASP always update the firmware on the motherboard. If it has not been done, the CPU is only 598 Mhz.

  You must contact the ASP for a update

  His son will confirm my suggestions:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=15879&MessageID=57994

• Satellite M300: speech recognition only works with external usb hub

  Hi all

  I have the Satellite M300 I could run the speech recognition program before you have the motherboard replaced due to failure of the usb.

  I found using the headset, I can not reach high enough quality to operate it.
  The only way I can use the Word program, use an external usb hub with its own power supply.

  The problem concerns the audio card, or simply not enough voltage?
  And na fix?

  See you soon

  Craig

  Hello

  The notebooks of USB ports provide a standard power of 500 my.
  As I said that it is a standard, but in USB devices different part 3 external cases need more power.

  For example, one of my external USB 2.5 HDD s must be connected with two USB ports at the same time to ensure that the HARD disk would get enough power to function properly.

  Your external card is unknown to me but maybe it needs more power as usual.

  Welcome them

• M200: Processor only works with 600 MHz - why?

  I noticed that when you change a pcb for a laptop regardless of the speed of processors it works to the slower which is 595/598 MHz.
  Have you noticed this? What is the reason behind?
  What is the solution?

  If the processor is to have 256MB / 512MB RAM this custom of things affect a large but for 1 GB & 2 GB the machine's performance becomes very problematic.
  I tried the update of DMI, it has not helped.
  Re-install os also did not help.
  The upgrade of BIO also did not help.
  Also I'm not very sure about this problem with a report any with pcbset change.
  With the right machine, I found the way that is switching dynamically from bios processor capabilities.
  In some machines that give problems I have not observed this option in the BIOS.

  The machines are PortA200 & Port M200 (tablet).
  someone can help me. I need to justify this to the customer.
  Thank you & best regards
  ChaitanyaN

  Hello

  This problem occurs after the change of motherboard. Usually after mainboard change it is very important to bring tests and diagnostic procedures. Without this procedure, the CPU works with fixed 600 MHZ.
  You should contact Toshiba service to resolve this problem of CPU.

  PS: This theme has been discussed here in the forum. Please check this:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=8492&MessageID=29400#29400
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=4351&MessageID=14808#14808

• Satellite M30-801 - display will not work after hibernation

  Hello everyone,

  I hope that you will help me with this problem. I have a Toshiba Satellite M30-801 and my warranty is over.

  A few days ago my computer was a few hours of standby. When I rebooted the system, the screen has continued on a black background. No images.
  I am connected to an external monitor to check the video card and this test has been authorized. Now, I'm writing this letters using my laptop connected to the external monitor.
  Also, I noticed that there is blacklight on the screen.

  I had checked the power management for the controllers of USB bus on the control panel.
  I downloaded and installed the latest update of the bios.
  But the screen remains black.
  Could you help me? any ideas?
  Thank you and best regards,

  Stalker99ES

  When you start your laptop without external display can you see anything?
  When you use external monitor that happen when you try to change the display mode by using the FN + F5 key combination?

• Updated and now the phone won't work online only works with 4G

  Download ios 10 and now my phone does not work online only work with 4G

  Hello thomas.friar,

  Thanks for asking for help with your iPhone to connect to the internet via wi - fi since the upgrade to iOS 10. We don't like to hear about the problems that occur after an upgrade. Here's what I recommend.

  The first thing we want to make sure that all of your data on the Mac and the iPhone is safe. For iPhone, you can perform a backup in iCloud or iTunes using this article: backing up your iPhone, iPad, and iPod touch.

  Then, follow the steps in this link: If your iPhone, iPad or iPod touch connects to a Wi-Fi network

  Thanks again and have a great rest of your day.

• We have site and only works with Firefox 3.0 Setup. so, can we have this version Offline Installer?

  We have site and only works with Firefox 3.0 Setup. so, can we have this version Offline Installer?

  Why is your site, not be able to be consulted in current Firefox?

  Firefox 3.0 is now rather old and vulnerable.

  If you must use a version of Firefox 3.0.x for that one site then try the portable version of Firefox 3.0.12. English is near the bottom of the list.
  http://sourceforge.NET/projects/PortableApps/files/Mozilla Firefox 2% C Portable ed. / Mozilla Firefox Portable edition 3.0.12 %2C.

  ^ copy + paste the url above.

  Installs it portable Firefox is autonomous, that it does not touch your version of Firefox or normal profiles for her.

• My camera Olympus only works with Apple's Quick Time 7. Is it possible to make it work with my operating system from Windows XP?

  My camera Olympus only works with Apple's Quick Time 7.  Is it possible to make it work with my operating system from Windows XP?

  Apple QuickTime 7 works is because. MOV is the Apple
  QuickTime format.

  QuickTime. MOV files can cause problems with Windows Media Player.
  And... If you plan to try editing with Movie Maker... the files should
  be converted to the. WMV format.

  No guarantee, but the following decoder might allow Windows Media
  Reader to read your. MOV files. Only problem is... it is not freeware to retail.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  3ivx MPEG-4 5.0.4 decoder
  http://store.3ivx.com/3ivxStore/product_details.php?ID=11

  Convert the. MOV files to the. WMV format may be worth a try:

  There are many converters available on the net... some
  free... some detail.

  The following freeware converter is just one example:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster download)
  (the file you want to download is: > FFSetup295.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the final screens)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag > FFSetup295.exe< out="" of="" the="">
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck

• Error message - it only works with Windows Media Player for Windows XP when trying to convert playlists to Excel.

  Original title: windows media player 11 trouble conversion playlists to Excel after obtaining bonus pack.

  I downloaded the bonus pack, everything works well except the library management wizard. Comes with the message that it only works with Windows Media Player for XP only. I am currently running windows xp edition family and windows media player 11.  Help, please.

  Hello

  You can follow this link & check if the problem persists:

  How to export a playlist in Windows Media Player?

  Hope the helps of information.
  Please post back and we do know.

• SimplePass only works with IE and not other browsers

  SimplePass v5.20.205a should work with other browsers like Chrome or Firefox?

  On my dv7-4295us w / Win7 - 64 bit, SimplePass only works with IE8/9. Use IE, suddenly me in connects to the listed sites. With Chrome or Firefox, suddenly won't open the password manager. After scrolling to and by selecting the entry with the correct connection info, an instance of IE opens and connects me.

  If Firefox is set as the default browser, one touch opens the password manager. You select the Web site, a warning message (Firefox doesn't know how to open this address, because the Protocol (dpql) is not associated with any program.)

  If Chrome is the browser default, one touch opens the password manager. The selection of the correct entry, results in a new instance of Chrome to open to my home page.

  BTW - the link for help does not (never) bar of tasks or SimplePass inside.

  Cognizer,

  Welcome to the Forum!

  Firefox will work with your version of SimplePass, called Digital Persona.

  The limitation is that you must use a PREVIOUS Firefox version: ~ 3.6 28

  Download of Firefox 3.6.x

  If you're ready to do this (use the old version), then you can use all the sites to your connections and also use the HP connection to access your account on your computer when it starts.  This old version of Firefox also works very well with IE8/9.

  You can update Firefox to the bosom of the version 3.6.x, when they ask... just don't get excited and upgrade to the latest Firefox or Simplepass balk.  Tip: You can keep a copy of your download 3.6.x autour just in case you lose the installation or something else happens and you need to reinstall Firefox later.

  IE8 is quite Rocky.  If you have no choice, be it, immediately update IE9.

  I don't know about Chrome.  Couldn't get anything to work with it.

  ----------------------------------------------------------------------------------------------------------------------------------------------------

  I hope this helps!

  We work hard to help!

  Whenever you see a useful Post - click on the Star Bravo on the left as a thank you!

  Doesn't have this Post solved your problem?  Mark "accept as Solution!

  Note: You can find the box "Accept as Solution" on threads started by you.

  2012 the year of the Dragon!

  Dragon tips:

  SimplePass flavoers Digital Persona and HP SimplePass 2011 / 2012 are MATERIAL dependent.  This means that your computer hardware dictates what kind of software SimplePass, you should run on your computer.  If you run Digital Persona SimplePass style, you must continue to run such - at least for now.  The software code is different, and are the two types are not interchangeable.

• BlackBerry Z10 headphone only works with the left ear

  My headphones (beats studios) only works with the left ear when connected. The helmet has never had a problem on my old iPhone 4 and currently with my rMBP so I know that's not the headphones. Any suggestions?

  There seems to be a problem with the jacket of the head. They are defective for a few pieces and the jacket cannot recognize the HP in the same case, what makes the phone to give no sounds on the notification.

  Try to use different headphones. If the problem persists try replacing the model.

• I have recently upgraded my MacBook Pro and Adobe creative suite 6.0 on the former. It of maybe a stupid question, but how do I get the software on my new MacBook Pro? My understanding is that my serial number only works with one computer at a time?

  I have recently upgraded my MacBook Pro and Adobe creative suite 6.0 on the former. It of maybe a stupid question, but how do I get the software on my new MacBook Pro? My understanding is that my serial number only works with one computer at a time?

  Hello

  You can install a copy of the software on the second machine it's just you are authorized to use on one machine at a time.

  You can check: how many computers can you install or run Adobe software on? ProDesignTools

  End user FAQ license contracts

  Please visit the given link to download CS6: applications download Creative Suite 6

  Concerning

  Bianka Attre

• sick. Why can CS3 - I only work with a single sheet on the desk? I want to make a multi page document...

  sick. Why can CS3 - I only work with a single sheet on the desk? I want to make a multi page document...

  Use this ancient workaround:

  Create a mutli-page PDF | Illustrator