Satellite M30: Cannot use COM with the Modem port

Similar Questions

• Satellite M30. cannot use the internal modem

  If the modem to open I get the message: the port (com3) that the modem is connected cannot be opened etc.
  In the Device Manager I can not find a com3 port at all.
  The Device Manager shows the device (modem) to work properly but when I query the modem I get again the first message.
  The log file says: open the modem device failed with error 000005aa.
  Already, just re-installed and updated.
  Any suggestions

  You install Nokia pc suite? When I installed it, I had the same problems you describe. It blocks the port 3.

• Satellite M30: Cannot use the recovery CD - this isn't for my unit?

  Hello

  I have a toshiba am and when I tried the recoery cd, a prompt comes out saying that the recovery cd is only for toshiba M30... which is what I have!
  The cd came with the laptop and I've used it before without a problem.
  Can someone tell me what the problem with my laptop?

  Thank you.

  Hmm maybe the DMI contains the name of the laptop bad.
  In this case, recovery cannot be installed because the notebook believes the recovery for a laptop CD.

  In this case, you should ask the service point for the update of DMI

• Satellite 1900 cannot conect directly to the modem via Ethernet cable

  I have a Satellite 1900 305 and I can't access internet when it connects directly to the modem cable via ethernet (RJ45), even after doing the procedure of recovery, and before I could. I can work normally and have internet if I connect to the pit of the modem a network hub. Can someone help me with this problem?

  Hello
  If I understand you correct you a trying to connect your laptop via Ethernet to a router or Modem or anything else, which is connected to the internet.

  Well it be, that the cable you a way to make this either a cable crossing of files?

  Good bye

• Satellite A200 - cannot use Vista after the recovery of the product

  Hello. I hope someone can help me with the following... This week I had various issues with which follows my laptop a Vista update that system restore did not fix, so I decided to go for a full recovery of product (which I have a complete backup of all my files).

  So far I have used the product recovery on my laptop in the 3 ways I can see (and more than once): without changing the settings, change the settings and maximize the partition, change settings and select advance / expertise.

  Whenever I was able to complete the initialization of windows, create a new user account, etc. Once the Office has been set up, I get a small window with a progress bar and when it's over, I click on the button 'restart '...

  After the reboot, I get the black screen that says Microsoft Corporation with the green progress bar, but he's there for what feels like 'too long '. After a while, I get a black screen with a cursor, then a blue screen for a crash dump.

  If I use F8 and boot mode safe, the system stops the CplIR.sys file, although the hard disk activity seems to be continuing. I turn off after 10 minutes.

  If I use F8 and then select Repair computer... This is what is happening with each option
  -Restore the full windows operating system: after clicking on OK nothing happens.
  -Diagnostics of memory: there is no problem with memory
  -DOS prompt: I run CHKDSK and there is no problem with the hard drive
  -Restart: there is no errors, even if the word diagnosis 'impossible' when he sees, there is no system restore points

  Then on reboot I get the black screen with cursor followed by the crashdump OR if I managed to log in and access my desktop, I get the crash dump, as soon as I try to do something (like open Control Panel).

  Following the instructions found elsewhere, I have tried this after removing the battery, then changing power management options immediately after the initialization of windows (ie. before clicking on the restart button). No change.

  I even ignored the button restart! But still get a crash dump, when I try to do something.

  Any ideas? I've got past (ie. wasted) so a lot of time on this and don't understand what may be wrong after formatting the windows drive image and reloading...

  Hello

  It's very interesting story. I got several notebooks several times but I never noticed anything like that.
  I must say that what you did right and you think appropriately. If I were you I would try exactly the same steps to make it work somehow.
  I do not know which issues you had before, but I imagine that here it's just the problems of software and not important for the operation of the equipment.

  It's really hard to say what can be the problem. What you can try, is somewhere to get facilities Microsoft Vista disk and install naked Vista to see if the same thing will happen again.
  Anyway, the fact is that images of recovery are tested and adapted for each laptop model and if the material is OK there no reason for this kind of behavior.

  Try again with the new installation using Microsoft facilities drive and let us know exactly what is happening.

• I used a cleaning program that has removed the solitaire games that come with the software package of vista. Is it possible to recover?

  original title: OOPS! Remove Solitaire games by mistake

  My husband used a cleaning program that has removed the solitaire games that come with the software package of vista. Is it possible to recover?

  Hi L-959,

  Try to reinstall the game Solitaire to turn on or off Windows features.

  Turn on or off Windows features

• the camera shutter sound cannot be silent with the mute button on my phone i 6 s

  the camera shutter sound cannot be silent with the mute button on my phone i 6 s

  Depending on where you purchased your phone, this is not possible, because of legislation in these countries that regulate this feature.

  In all other cases, try to force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again. You won't lose data, but it can cure some problems after installing new software or applications.

  In the case where this does not work, restore the phone:

  Use iTunes to restore your device iOS to factory settings

• Problems with the modem on L40 (Vista)

  Hi guys,.

  I am trying to help a friend out with his new laptop computer, as she dosen't have DSL and needs must use dial-up. I'm new to Vista so please tell me if I'm missing something obvious.

  Right... I use the same cable modem and telephone line that also works on another PC, and before ask you I pluged it in the modem port and not the ethernet port. I can query the modem ok by Device Manager / modem properties. I noticed that the modem is configured for some software of Toshiba and not a comm port, is this correct? When you look at the software Toshiba itself it looks like the comm3

  When I try to create a dial-up connection / use dialer I get the error that it cannot get dial tone, I also tried to change the setting so that he always tries to dial without tone, nothing helps. If it works on another PC ok, I'd say it was the cable modem or phone line.

  Any ideas?

  See you soon

  Hello

  Are you if that cell phone is properly connected to the telephone line in the wall?

• Connectivity problem - problem with the modem or the router of network

  I had a network with 2 computers.  The main computer was a Windows XP operating system and the secondary is a Windows Vista operating system.  There was a modem connection and the router. Due to a storm and a leak in my ceiling in my main computer got wet and I couldn't use it.  I have connected the modem without the router directly to the secondary computer, but it is not recognize the modem.  "Internet Explorer cannot display the webpage." So I ran the diagnostics and received a message that there could be a problem with the modem or the network router.  I did the thing 'ipconfig' and there is no gateway.  Is there anything I should do to make this secondary computer main computer?

  Hello

  If you use a router there is no primary and secondary, all the computers connected to the router are equal.

  Many Internet service providers allow you to control some form of autehtication (ID, PW) online journal.

  Your router and the computer humid probably were installed to authenticate.

  If the router does not use it.

  Otherwise, contact your ISP and ask for the help of authentication.

  Jack MVP-networking. EZLAN.NET

• PHP: The partition on my solitaire game that come with the computer has a prefix of Php.How can I get rid of php?

  The partition on my solitaire game that come with the computer (but not on the same computer system of woman) has a prefix of Php.

  How can I get rid of the php?

  Hi pichick,

  1. what operating system is installed on your computer?

  2. when the question is is produced?

  3. you remember to make changes to your computer before the problem?

  4. are you referring to the solitaire game that is already installed in your operating system, the solitaire online game or the game of solitaire that is downloaded from the Internet?

  In the meantime, follow these methods.

  Method 1:

  Step 1:

  I suggest you Uninstall and reinstall the game and check (if referring to downloaded the game)

  Note: Specific measures for Windows 7 and Vista

  Step 2:

  If you are referring to the solitary of the Games Explorer, you can disable the feature, restart the computer and then turn on the game and check its features.
   
  a. click the Start button, select Control Panel, click programs and then click turn on turn Windows features on or off.

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  b. develop the Games folder, clear the check box next to solitaire to turn a Windows feature (game) off

  c. click OK.
   
  That repeat steps but next time make sure that the box next to solitaire.
   
  Turn on or off Windows features
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  Note: Specific measures for Windows 7 and Vista

  Method 2:

  If the issue took place recently, you can perform a System Restore to the point that it was working fine.

  Note: Specific measures for Windows 7

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• PC does not come with the CD to recover to the OEM of Vista Businese restore CD

  original title: PC does not come with the CD to recover to the OEM of Vista Businese restore CD (product key: )

  DEAR SIR/MADAM,

  RE: PC NOT EQUIPPED TO RECOVER WINDOWS VISTA™ BUSINESS OEM FOR MY LAPTOP HP-520 CD, AFTER PC PROBLEM AND MAY NOT RECOVER AND FIX IT

  I GOT CONTACTED MICROSOFT SINGAPORE OFFICE BEFORE BUT CAN t GET BACK RECOVER CD EVEN AGREE OF PAY SGD40 /-, SO I USE MY CD of VISTA STARTER USED to REVOCER MY HP USE URGENT, THE PRODUCT KEY ARE AS below: * * removed TOC * (), there INSTLLED on MY OTHER PC IN MY HOUSE BEFORE.

  PLEASE ME ADVISE HOW DID PAY A LOT OF MONEY FOR THE PURCHASE OF MICROSOFT LICENSE AGAIN AND AGAIN FOR MY FAMILY USE ONLY.

  WIN 98 FIRST VERSION, WIN95, WIN98 2ND VERSION, WIN VISTA BUSINESS OEM, WIN VISTA STARTER, WIN VISTA HOME PREMIUM VERSION ETC...

  MY PERSON FAMILY MEMBER ONLY 4...

  PLEASE HELP AND ANSWER, I WON'T USE MICROSOFT AS NO LICENSE USER.

  ALEXANDER TANG-SINGAPORE

  Please, do not type in uppercase.  It is considered "shouting" in the forums.  We already know your issue is important to you or you him would have not posted in the first place.

  Recovery discs are available for the copy of Windows installed initially on the computer.  Which edition of Windows is printed on the COA sticker on your computer?  You can order a recovery disc for this edition of the manufacturer of the computer.  If your windows is an upgrade, you will need to find the upgrade dvd.

• Event ID 10016 - the application-specific permission settings do not local Activation permission for the COM with the CLSID server application

  Lately, I'm getting this system error a lot now that I've upgraded to Windows 8 Pro is an event DistributedCom 10016 ID. Here is the text of the error:

  The application-specific permission settings do not local Activation permission for the COM with the CLSID server application

  {D63B10C5-BB46-4990-A94F-E40B9D520160}

  and APPID

  {9CA88EE3-ACB7-47C8-AFC4-AB702511C276}

  the user NT AUTHORITY\SYSTEM SID (S-1-5-18) from the address LocalHost (using LRPC) running in the container of the application unavailable SID (not available). This security permission can be modified using the Component Services administrative tool.

  Anyone has an idea why I get this error?
  Walt

  Same thing here. Grayed. Windows 8.1 seems to fill the observer of events with many more errors than previous versions.

  Edit: OK, discovered why it is grayed out. There are 2 reg key, you must set permissions before going to the Configuration of DCOM in component services. The CLSID key and the APPID key.

  From another forum, although it applies to a different application, same principle:

  1. open Regedit.
  2. go in HKEY_Classes_Root\CLSID\ * CLSID *.
  Note: * CLSID * stand for the ID that appears in your event viewer error. In your case, it is {C2F03A33-21F5-47FA-B4BB-156362A2F239}.
  3. right-click on it and select authorization.
  4. click on Advance and change owner to administrator. Also click on the box that will appear below the threshold of owner.
  5. apply a full control.
  6. close the tab, then go to HKEY_LocalMachine\Software\Classes\AppID\ * APPID *.
  Note: * AppID * is the ID that appears in your event viewer. In your case, it is {316CDED5-E4AE-4B15-9113-7055D84DCC97}.
  7 right-click on it and select authorization.
  8. click on Advance and change the owner to administrators.
  9. click on the box that will appear below the line owner.
  10. click on apply and grant full control to the administrators.
  11. close all tabs and navigate to the administration tool.
  12. open component services.
  13. click on the computer, click my computer, and then click DCOM.
  14 find the corresponding service that appears on the display of the error.
  15. right-click on it, and then click Properties.
  16. click the Security tab, and then click Add a user. Add the SYSTEM and then apply.
  17. check enable local.

  Then use the relevant keys here and the DCOM Config utility should give you access greyed onareas:

  CLSID:
  
  {D63B10C5-BB46-4990-A94F-E40B9D520160}

  and APPID

  {9CA88EE3-ACB7-47C8-AFC4-AB702511C276}

• Is the Raw 8 camera that comes with the full Version elements?

  I have CS5 and Camera Raw 6 that accompanies it.  I want to update Camera Raw at 8, but without necessarily CS5 to CS6. Can I just buy 14 elements (for $80) for the benefit of obtaining Camera Raw 8? Someone said the camera Raw 8 comes with the elements is not a full version, with some missing features. Is this true? Thank you!

  I use not elements, but the next document shows the differences between Photoshop and Camera Raw in elements: Adobe Camera Raw differences between Adobe Photoshop and Adobe Photoshop Elements

• When I'm accommodating the toolbar of the new option to arrange the icons on the toolbar toolbar change several tools come with the words "wrong tool" and have no icon associated with them. What are these missing tools 'bad '?

  When I'm accommodating the toolbar of the new option to arrange the icons on the toolbar toolbar change several tools come with the words "wrong tool" and have no icon associated with them. What are these missing tools 'bad '?

  I see you have fixed this now, but I was about to tell you that you could have accommodated in the 'Bad' by its shortcut "I" tool.

  

  To save a custom toolbar, get everything the way you want and click on the button space work, click new workspace

  

  Type a name for the workspace, and check all three options.

  

  If I have to use a single screen, I use a variant of the Essentials workspace with minor panels collapsed and dock for main panels.  I call this Essentials 2

  

  It also seems to me that with all these options, it's stupid not to take full advantage of them, so I separate my most used instruments for their own group and double column toolbar to adjust the screen.  I tried to drop in the groups for the most used tool near the document image (right). I love it, but it take some time remembering the new positions.

  

• Hello. I have Photoshop CS4. Can I use this with the latest Mac OSX version10.10.1?

  Hello. I have Photoshop CS4. Can I use this with the latest Mac OSX version10.10.1?

  Hi Sonste,

  Greetings.

  For many people, it worked, and for some, it didn't.

  CS 4 could give you a run-time error java you can download an installation

  Java for OS X 2015-001

  Suggest you check the link call

  http://www.Mac-forums.com/OS-x-operating-system/317803-Adobe-CS4-Yosemite-10-10-a.html

  Concerning

  Rohit